Using Click Boxes and Rollover Slidelets on same frame issue

Hi all,
We are building a series of practice simulations, where the learner performs X steps to complete a software task. Each frame of the sim begins with a Task box that displays for a moment, then disappears. If the learner cannot remember the task, there is a Task button that has a rollover slidelet assigned to it, that when rolled over, displays the initial Task box. This all works fine. However, if the learner clicks on the rollover slidelet, rather than rolling over it, the click box on the page sees that as an attempt, and displays the Incorrect feedback box.
I have set the rollover slidelet properties to no action for both Onclick and OnRollover, and have placed the rollover slidelet to be on the top layer of the frame, but I cannot prevent the Click box from seeing when the learner clicks on the Rollover slidelet field.
Any thoughts?
Thanks,
Steve R

Just to answer to something in your last sentence: even if each slide has a unique text, you could insert a user variable in the rollover text on the Master slide, and populate that variable on each slide with an On Enter action (command Assign). In this blog post I used such a work flow:
http://blog.lilybiri.com/beat-the-system-save-time-creating-advanced-a
Lilybiri

Similar Messages

I'm having an issue displaying a button using advanced actions and rollover slidelets.

I'm having an issue getting a button to display after the learner places his mouse over three different rollover slidelets which are all on the same slide. I created three variables and assigned each to the rollover slidelets. I also created a conditional action that I assigned to the slide. The variables are set to zero and then the action is to assign the variable with 1 after it's rolled over. The conditional action says that once all three variables are equal to 1, show the button and continue. Unfortunately the button is not displaying after the three rollovers have been viewed. Any insight?

I can only suspect what is going wrong, it would have been a lot easier if you did show those actions.
My suspicion is due to this sentence '... a conditional action that I assigned to the slide'? There are two slide events: On Enter, and On Exit. Read more about those events:
http://blog.lilybiri.com/events-and-advanced-actions
Those events can trigger an advanced action but only at that frame: first frame (On enter), last frame of the slide. But you expect the button to appear when the three rollover events have occurred? That means the condition has to be checked by each action triggered by the rollover events. Have multiple examples on my blog for such use cases, latest one was:
http://blog.lilybiri.com/blog-after-posterous-clickclick
Shortly:
Use the On Enter event of the slide to reset the three variables to zero, that will be a standard advanced action with three Assign statements (this is not necessary if you never expect the user to return to that slide)
Use each Rollover event to trigger a conditional advanced action with two decisions:
First decision 'Always' will be a mimicked standard action, and toggles that variable to 1
Second decision 'Checkit' will have your condition to see if the three variables are equal to 1, if Yes show the button, if No, nothing has to happen (or maybe Continue, depends on setup)
Lilybiri

Can I use click boxes and text entry boxes instead of quizzes to populate a certificate?

I have set up an assessment module in my project and i have enabled the reporting as follows:
Standard SCORM
Reporting Status: Pass/Fail and Percent
choose Report Data: Quiz results and slide view
Reporting level: Interactions and score.
I have uploaded this to inquis LMS and it tells me I have passed but records it as failed in the History. Is this a problem with my settings or the LMS does anyone know?
Also
It tells me in Captivate that I have passed but the certificate which I inserted as a widget in my project says I have failed ?

Sorry, I forgot to follow your question up. Too many things to be done at the same time...
There seems to be something wrong with the AS2 certificate, I have been reading this on the forum.
If you want to use the AS3 certificate, you have make your CP-file using AS3. This can be done in the Preferences, Project, Publish settings, Actionscript version.
Lilybiri

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Iam using iphone 4s and Iphone 5s with same apple ID but my network is different and whenever Iam getting call in i5s and in my both handset same calls are coming. Please provide me solutions

Iam using iphone 4s and Iphone 5s with same apple ID but my network is different and whenever Iam getting call in i5s and in my both handset same calls are coming. Please provide me solutions

On both devices, go to Settings>Facetime and turn off cellular calls.
~Lyssa

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column, find the 10 lowest numbers, then get the average and after that multiply it by .96 I used to use Excel and the formula worked fine in that. Here is my Formula
=(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96 So instead of using 1 cell, I'm using 12 cells to get my answer.
This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
Hoping I explain myself well enough and that someone can help me.
Thanks

You can still do it in one cell but it will be more unruly than the Excel array formula.
=average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
where you would, of course, replace the "..." with the remaining six SMALL functions.

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

How to use Standard POD and Integrated POD at same VMfg session

Hi,
how POD's have to configure so that you can use Standard POD and Integrated POD at same VMfg session. we have problem that if I login to VMfg and open default integrated POD, this POD opened in normal way. But, after that if you open default Standard POD (workstation ), it will not opened. VMfg gives error 'The POD "" type of I does not exist. (Message 15924)'
Same problem when you login to VMfg and open Standard POD: POD open normally. After that open Integrated POD: this POD open normally. But when open Standard POD again, an error exists 'The POD "*" type of I does not exist. (Message 15924)'
Regards,
- Jukka

Hi,
you are right, when &WORKSTATION_TYPE=S is configured for standard POD and &WORKSTATION_TYPE=I for integrated POD, both PODs can be used in same session.
Also I noticed that if &WORKSTATION_TYPE=S is not configured for Standard POD, in first time when I open this POD, I got error. But when I reopen same Standard POD, it will open normally without errors. Why it works so?
- Jukka

Can I use both iPhoto and Aperture on the same library?

I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
Thanks much!
John

I think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
Thank you

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Using Click Boxes in an Assessment

Hi All-
I have created a final assessment simulation. In this
software simulation users have to select the appropiate part of the
system which I have added click boxes to. At the end there are 3
multiple choice questions.
In the Advanced preferences each click box and multiple
choice question has been assigned a point and I have selected the
Add to total, track score, and Report columns.
In the Quiz settings I have set the score to be a 90% to
pass. This did not seem to work so I tried to change the points to
be 90 out of 100. Each time I save and go back in it changes by 90
to a 6.
Also at the end of the quiz with the summary page it only
totals the multiple choice questions and not the clicks. When a
user reviews the quiz it only takes them back to the multiple
choice questions.
Can anyone help? Thank you!

Are you sure the click boxes are set to be tracked for
quizzing? If not, press F9 to open the Advanced Interaction
palette. Click 'All Scorable Objects' so you can see every element.
Then check to see that the checkboxes in 'Add to total' and 'Track
Score' columns are checked. Also, be sure there are points greater
than zero in the Points column.
G'luck.

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word, excel, nothing works.
I have a mac book pro 10.6.8
Thanks

cassidy3 wrote:
Good news is that I can access all my documents. Bad news is I had to pay $150 for it.
I spent a lot of time trying to find a solution before buying. I did not try the launch terminal solution....
I will check back so I can find out what to do should this happen again.
More possible bad news. If you had followed what fane_j had asked you to do you might have found out it wasn't microsoft's fault for your problem and wouldn't have had to spend $150. Because while you may have an Office that works, fane_j was not suggesting a solution but probing for a trojan (google "flashback trojan") that has been crashing powerpc code which is what Office 2004 is.
So if you do have the trojan, while you can run a version of Office, the trojan may still be in your system since installing a version of Office isn't going to remove it. So I'll make another request. Launch Terminal (in your Utilities folder) and copy/paste the following line into the terminal window and hit return:
defaults read ~/.MacOSX/environment
If you see anything other than a "does not exist" error message you almost certainly do have the trojan and post the results in this thread.
The choice is yours. You can ignore this and take the risk. Or do what has been requested.

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

Click boxes and buttons not working in Captivate 3 published projects

I really, really, hope that someone can help me...
we are migrating from Centra/Saba LMS to Connect Pro LMS and while taking our "old" SCORM projects and posting them to the Connect Pro server we have encountered an issue...and the reason it's very hard to trouble shoot is that it's not all of the projects....??
Once a project is pulished none of the buttons or click boxes are working - for instance we use a play button on the frist slide for students to enter the course - you click it nothing happens (except when you mouse over the button it does change color)...same with the click boxes - I can use the progress bar to move froward but anything I click just doesn't respond...
Has anyone encountered this? and I hope know something we can do?
THANKS SO MUCH,
Jen

Do your published projects work outside of your LMS?
Or is it just inside the new LMS that it isn't working?
Usually buttons and click boxes not working is because your slides are pausing before the button becomes active.
What version of Captivate and Flash are you using?

Using Click Boxes and Rollover Slidelets on same frame issue

Similar Messages

Maybe you are looking for