Using Connect Via Citrix

Do you know if there are known issues for viewing meetings
via Citrix? Our users report that when they click on the meeting
link from Outlook running via Citrix that they cannot connect.
Thanks

I'm connecting to the citrix via a PC. When I try to make a participant using a neo station a presenter, it tries to install the flash add-in but our citrix rejects it. how do we get this add-in onto our server?

Similar Messages

Ipad Air unable to connect via Citrix Receiver

Hello,
Has anyone been having issues since the beginning of the week with regards to connecting via the Citrix Receiver App? I just get cannot connect, it does launch the applications briefly but then bombs out.
Tried factory reset and upgrading to 8.1 but still same issue.
Did notice Citrix updated their app on Monday.
Thanks,

usb is a digital serial bus it does not carry analog audio to be able to do what you wish a program would have to run on both devices and I doubt that 3th party programs can get access to the usb port in ios
your best bet is to connect the minijack audio out connector of the ios device to a minijack analog input port like line or mic in on the mac
if a such does not exist then you can get usb audio cards for the computer which would have a 3.5mm minijack line in

Setup different printer as default in different location in SAP via Citrix

hi all,
i have two location, where the user of SAP B1 uses B1 via Citrix,they have different printer at their respective location, i need to do the setup for two printer one for normal print anather for barcode printer.
Both have two printer in their respective location. how to make the printer setup on both the place in SAP B1, so that those two printer should come as default for both of them. here they have two different user access. but how to do the setup of printer on user basis, so that it can take the two printer as default, on both the location.
kindly suggest me some idea that how to do that
regards
sandip

Sandip,
I remember seeing this post from you before. I would urge you to follow up on your posts and check the replies before posting them again. This is mainly because if you keep posting the same questions again inspite of getting answers you might lose credibility in getting replies. I am saying this in your best interest.
Please see my reply for your previous message
As per what I know you can setup a default Printer for a document (PLD). Also for your situation you should save the same PLD with two different names and default one to each user. Now you have two PLD's for two of your users.
Open the first PLD template and from the design mode of PLD.
In the Top Menu
Print layout designer > Display document properties -- go to Paper format tab and select the Printer you want the document to print for this PLD user.
Do the same for the other user.
I am not sure how this will work in a distributed environment where you are using CITRIX. Please check with your Network associate.
Thanks
Suda

I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?

I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?

Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here

My connection via hdmi to my TV is no longer working. Even if I use a thunderbolt to hdmi converter

Hi, the day before yesterday I turned on my tv which was connected via HDMI out on the mac mini to HDMI in on my TV. Everything was working fine, however I have been trying to set up dual monitoring on another monitor using an HDMI to VGA adapter to my second monitor but nothing was working. I was about to watch a film from the mac to the TV wen I thought it might be the resolution on the hdmi out why it wasn't working on the monitor but was on the TV so I changed the settings and the hdmi to the TV cut out. My main monitor is connected by thunderbolt to VGA adapter and works fine. I can change all the settings for screen resolution on the main monitor and have tried every setting on it then unplugging and plugging in the hdmi cable from the mac to the TV. I get the blue flash on the screen so I know it is being detected but here is where it gets weird.
I figured I would try the thunderbolt to HDMI converter I originally bought for my iMac and again the blue screen flashes up but there is no blue flash or any sort of detection on the TV.
The whole time there is nothing showing up on the screen, even when I unplug my main display from thunderbolt to VGA (the main monitor) and connect the thunderbolt to hdmi adapter and plug in the hdmi to the TV.
I know it's not the hdmi cable as I have tested it on my youview box to my tv and it worked fine.
I also know its not the tv as iv connected my friends windows laptop to the TV using the same cable so it must be the settings on the mac.
I have tried doing a time machine restore to the day I bought it and have had no problems so far until I changed the settings. Why oh why did I mess about with it!!
If anyone can help please let me know ASAP.
It doesn't show up the HDMI output in audio anymore either, however like I say it flashes blue wen I connect the hdmi but seems to have no idea that the HDMI is connected in the display settings! It's so frustrating. I'm going to call the mac support today but if anyone on here hash as any similar problems n fixed them please let me know.
Btw I'm running Mac OS X 10.8.4. I know I can connect via a long VGA cable but that's not really the point. I, at least would like to get my mirrored desktop on my tv back from HDMI!

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

Can I share my internet connection via wifi AND use my wireless printer at the same time?

Not completely familiar with wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

Hi,
It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Online conference participants hear echo when cinema display is connected via mini-displayport, even though I am using headphones with mic.

When I use Google Hangout or GoToMeeting, other participants in the meeting hear an echo of their sound -- loud and obtrusive. When I mute, it goes away.
This only happens when I am using my Apple Cinema Display 27" (recent vintage) connected via the mini-displayport (natively, not an adapter).
On my end, i don't hear their echo, but I do hear waves of squelching -- basically it sounds like their end is trying to adjust their input down to account for what it thinks I saying, even though I'm not talking, it's just the echo making that happen.
Sometimes this doesn't occur -- it seems to crop up intermittently, but happens around 75% of the time at some point in a conversation.
I am using iPhone-compatible in-ear earphones with built-in mic; the earphones are the rubber seal type, so there's no sound escaping them that the system should even be able to hear.
I have my audio set up for "Headphones" as output device.
Input device is set up as "External Microphone" -- this part confuses me because even though I know my Cinema Display has a microphone, the OS seems not to list it as a separate input device. So I wonder if it's getting confused trying to use both the cinema display's mic *and* the earphone mic? (see dropdown image)
OS version 10.20.2; Macbook Air 13 inch, "early 2014" and Apple LED Cinema Display 27inch
Earphones are skull-candy brand iPhone compatible (with built-in mic), plugged into the macbook air's earphone jack. (without the display connected, this has always worked fine -- and with a prior non-apple display that had no mic/camera this was not a problem)
This is an ongoing issue in our office, in fact ... especially troublesome in client meetings.
I haven't tried other configurations, other than when using the Cinema Display's USB connector, the same thing happens.
It also happens even when I'm not using the "USB PnP Sound Device" you see listed in the dropdown here -- that's something I use for controlling music output to my desk speakers.
A general question: is there no way to control the cinema display's mic and/or camera more directly?
(EDITED TO ADD: Ok I see in the Cinema Display manual, there should be a listing for "Display Audio" in the input list, but my SysPref panel has none listed. See other screenshot. I wonder if this is the problem??)

Curious, is the 30-inch Cinema Display you have, one listed in this Support Article:
•Apple Cinema Display (20-, 23-, and 30-inch DVI) - Technical Specifications
or is yours a later build series; which one do you have...? This says Mini unsupported.
The specifications vary across the line of Displays, as do the graphic support in Macs.
I'd suspect your version is a later 30-inch display, but it may be one of these. And a
newer 27-inch Display has the Thunderbolt cable.
In any event...
Good luck & happy computing!

HT204378 2 iOS8.1.1 devices can't connect via BT "Using Keynote Remote with Bluetooth" - HT6112

I'm unable to get to iOS devices to connect via Bluetooth for Keynote control. It's described above under the heading "Using Keynote Remote with Bluetooth". Am I missing something? I see the article mentions iOS8 so I know it's been updated recently. I also see that this hasn't worked in the past. Curious that the articles suggests it can be done now.
I have 3 iOS devices all 8.1.1.
iPhone 5
iPhone 5s
iPad 3rd Gen
Thanks,
Russell

Just talked to Bose and learned the solution.
Reset the speaker ....hold down the bluetooth button until you hear a tone. Delete the Bose in the Bluetooth Device directory on the iPad. When it is automatically rediscovered it will connect.
Worked for me .....

Can AirPort express be used for AirPlay with my home stereo, and to give my Xbox 360 a WIRED internet connection via ethernet, simultaneously?

I am considering buying an airport but I am not sure if it will work how I would like it to. I need it for two things. The first would be to use for AirPlay with my home stereo. The second would be to use as a way to give my Xbox 360 a WIRED internet connection via the ethernet port. I would like to do these things simultaneously, rather than constantly changing the configuration and being limited to a single function each time I do so.
Thanks!

The 802.11n AirPort Express Base Station (AXn) can be configured as a wireless Ethernet bridge. In this configuration, it would join an existing wireless network and its Ethernet port would be enabled for a wired client, like your Xbox 360. This configuration would also support AirPlay simultaneously.

I have a problem connecting via wi fi when my wife uses her PC

I have a problem connecting via wi fi when my wife uses her PC

Hello GJSCHUBERT,
Thanks for the question, and welcome to Apple Support Communities. The easiest solution may be to simply restart your router, but you can also see these resources:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Check to see if you have a self-assigned IP address:
1. Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap .
2. If your IP address is 169.254.xxx.xxx, see this article.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

I am aware that iMacs do not support Blu-ray. However could I use am a Blu-ray player connected via the audio/optical digital in port to watch Blu-ray on my iMac screen ?

I am aware that iMacs donot support Blu-ray. However, could I use a blu-ray player connected via the audio/optical digital in port to watch blu-ray on my iMac screen ?

You could connect a FireWire Blu-Ray drive and use non-Apple player software.
<http://eshop.macsales.com/search/external+blu+ray>
<http://www.macblurayplayer.com>
<http://www.macblurayplayer.com/download.htm>
<http://www.mcetech.com/blu-ray/>

Setting up new imac on network using dhcp nut not getting a valid ip address. Same happens when I try to connect via wi-fi. IP address being assigned is 10.45.190.195

Have new Imac that I'm setting up. Company is using DHCP to manage IP addresses. Mac is plugged into netgear hub along with a PC. Mac is getting an invalid IP address of 10.45.190.195. PC is working fine. I've powered the hub on and off. I've renewed th DHCP lease on the Mac many times but IP address always comes back as 10.45.190.195. I've plugged the network cable directly in the network port bypassing the hub. Same result.
Having the same issue when trying to connect via Wi-Fi,
Anyone experiencing this issue?

I see what you are saying. When I lived in the dorms, I was set up in bridge mode because we had that type of modem. My question now is do I distribute a range of static IP's or share a public? Either of these settings give me errors where the starting and ending DHCP addresses conflict. I use 10.0.1.1 and 10.0.1.100 and this error no longer seems to persist, but then I am not able to connect to the internet and the amber light keeps flashing- along with my computer showing that I am still connected to the TM.
Thank you for your support so far.

Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the

Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
Help?

Did you check your security software settings?
Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software.

My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Using Connect Via Citrix

Similar Messages

Maybe you are looking for