Using cron to stop and restart password protected instance (App Server 7)

I have been asked by a customer to create a cron job to stop and restart their web application running under Applications server 7.
I have created the script and can stop the instance, but I am unable to start it as it is asking for a password.
I have included this in the script but it doesn't seem to like having a password supplied this way.
Am I doing something wrong or Are there any alternative ways of stopping and restarting an application, using Cron?

Have you looked at using password.conf file as described in --
http://docs.sun.com/source/816-7155-10/crcfgfil.html#1075615
You might also want to look at --
http://docs.sun.com/source/816-7156-10/agsvrprf.html#1019453

Similar Messages

When using the "Books" app on my ipod touch, if I open one of my books there is no way to return to the library without stopping and restarting the app. What am I doing wrong?

Once I open a book in my library there is no option to close it and return to the library. I must leave the app, stop the app and then restart it. How do I exit an opened book to return to my library without having to exit, stop, and restart the app?

Assuming you are talking about "iBooks", then just
tap the center of the screen
and you should see a "Library" in the upper left corner of the screen.
tap the center of the screen again,
and you should return to full screen mode.
if this is NOT iBooks, then I do not know what controls that app

Why do I need to stop and restart web server?????

I am developing servlets on sun's standard web server as well as with Netscape's web server.
The problem is every time I make any changes to servlet and recompile my code, changes are not visible until I stop and restart web server. I guess web server uses cached version of servlet.
Can any body help me to solve this problem? It is matter of some setting issues in web server. But since I am novice, I don't know.........

Some app servers have a "reloadable" attribute that can automatically detect changes in your servlet and reload your application for you. Not sure if all do though... but check through the docs on your app server and see if there's something similar. If not, you're probably stuck manually restarting.

Have to stop and restart Q-Master for it to show up in Compressor 3.5.1 SL

I am having a problem with Q-Master in Snow Leopard, running compressor 3.5.1, where every time I restart, when I go into compressor, it does not show up my Q-Master cluster. Instead I must go into the control panel (which has to restart into 32 bit mode, COME ON APPLE LETS MAKE Q-MASTER 64 BIT!) and stop and restart Q-Master and then it shows up in Compressor.
Is this because the control panel has to be in 32 bit mode for it to work? Is anyone else having a similar problem?

I have the exact same thing happening!!! Funny how you haven't got a response to fix the issue. I called Apple and the guys said I needed to reformat my drive and install FCS from scratch to get rid of any files from FCS 2, only because I used some FCP utility to remove the previous version.< </div>
Sorry you got that advice from Apple. Reinstalling Apple software is rarely effective and a scorched earth approach rarely solves anything. It simply takes everything back to a default state.
I've had this same issue with Qmaster on my system and I'm still running 10.5+ so it's not a Snow Leopard issue. I solved it, at least for now, by simply deleting Qmaster only and reinstalling just Qmaster. However, I deleted and installed Qmaster to solve a problem with FCP; it was crashing immediately upon launch.
This is important: I have no way of knowing if there is a direct or causal relationship between any of these events.
bogiesan

How to start, stop and restart task

Hello Everyone,
Need advice on what is the correct way to start, stop and restart a Java task?
I have tried with Executors.newCachedThreadPool() or fixedThreadPool() however I was only able to submit the task once. My program crashed when i tried to resubmit the task again after a shutdownnow command()

Tasks are designed to be run once. If you want restart functionality, use a service:
http://docs.oracle.com/javafx/2/api/javafx/concurrent/Service.html
The sample service I posted in the following thread demonstrates how to do this:
Multithreading
Use of Executors is not necessary as a Service encapsulates the execution thread management (though you can set your own executor on the service if you really needed it). All you need to do is make use of the service start, cancel, restart and reset methods as required. If you do use the cancel method, then you need to make sure that your service is properly interrupt aware for the cancel to function as you expect.

After updating 10.9.2 update the computer stops and restarts abruptly and systematically whenever it is in standby. Please how to fix this ?

Hello,
I'm french, sorry my bad english. Please Help me !
After updating 10.9.2 update the computer stops and restarts abruptly and systematically whenever it is in standby (sleeping).
This message apeaars : “Your computer restarted because of a problem”
Please how to fix this ?
I tried an SMC reset PRAM and reset, but not result !
I have not installed new software or plugin. Only updated OS X 10.9.2.
With 10.9.1 or earlier I never had a problem !
Thank you for your help
Francisco to Paris

Hello FM-Paris,
Thank you for the details of the issue you are experiencing with your Mac mini. I would be concerned too if my Mac mini was restarting unexpectedly. I recommend following the steps in the section titled "Troubleshooting a recurring kernel panic" in the article below to help isolate and troubleshoot this issue:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/kb/TS4636
Thank you for using Apple Support Communities.
Best,
Sheila M.

Stop and restart the USRP

Hello,
I have been trying to implement a small application for reception and analysis of radio signals. Well, I want to be able to stop and restart the record at wish. The first operation works fine; I can record and stop. However, when I try to record again, I get an error : "This operation requires the driver to be in the Running state". Although when stop recording it goes to initialize state (starting point) where it first started and worked properly. I've attached my VI to this thread.
kind regards
Attachments:
Analysis.vi ‏59 KB

Hi,
I took a look at your VI and reproduced the problem in your VI but I tried to simplify the problem by trying to reproduce it in a smaller VI (attached).
Please find the VI attached which starts aborts and restarts a acquisition with configuration stages in between. I could not reproduce the issue using the VI which I have attached.
So I think there might be some very small issue in the VI which you posted.
Thanks.
Note: I used driver 14.0 which was recently released. Please ignore any driver specific VIs or connections.
Attachments:
Start Abort Restart.vi ‏20 KB

Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car 'm using Win 8

Hi,
How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
get the most qualified pool of respondents there:
http://community.office365.com/en-us/forums/default.aspx
If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

Start, stop and restart while loops

Hi, my qustion is i have 2 example a and example b. Example b lets u start counting up in seconds when u want to. as long as the toggle switchs are in correct position. it also lets u start, stop and restart if need be. i want to be able to that with example a, but for some reason the while loop always sets of running independent of what position the the toggle switch. Any help greatly appreciated.
Thanks Stuart
Attachments:
examplealib.llb ‏202 KB
exampleb.vi ‏25 KB

An example as the attachment.
Attachments:
switch.vi ‏23 KB

I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. Any solutions?

I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. How can I clear the download or solve this?

If it is a HD movie, it may not be enough. The iPad also need working space.
Try download to iTune (computer) and "Move" to iPad.

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad. I don't want to lock him out of the iPad. Let him use Angry birds, but not Sims or Games not appropriate for him that I play.

Sorry, but it is not possible to restrict use of specific apps other that the few restrictions provided in the Restrictions settings, not unless the app itself provides some sort of lock. If you don't want your child playing certain games, the only answer is to not load them on the iPad he uses.
Regards.

Can a subVI tell when the application it is part of has been stopped and restarted?

Can a subVI tell when the application it is part of has been stopped and restarted?
It is easy enough for a subVI to tell when it has been run for the first time after having been loaded into memory. But is there a way for a subVI to tell when the application it is part of has been stopped and restarted? Is there some property or application-invocation-specific refnum that when queried multiple times during the same run of the application would return the same value yet when queried during different runs of the application would return different values?
I don�t want to depend on anything that happens when a run is exited.
I don�t want to require code to be included in the main V
I to accomplish the solution.
(Otherwise I could, in the main VI create an un-named semaphore tied to a global; the subVI could then check the global to see if the value changed, which it would between runs of the application.)
Any ideas?

Have you tried the First Call? function? It's on the Advanced>Synchronization palette.

Video podcast stops and restarts

with one of my podcasts (Bush League TV), it will download completely, but after i sync it to my iPod, whenever it reaches a certain point it will stop and restart. Whenever i play it in iTunes it plays alright but is sorta slow and skippy. i have tried deleting it and then redownloading it. any ideas?

Nobody?

Shell script to start, stop and restart a JAR

Hi everyone,
Does anyone have idea to write a shell script to start, stop and restart a JAR under linux? it can indicate a method or parameter? Thanks!
this JAR inculdes a class with main method like this:
public class Client(){
public Client(String name){
public void stopClient(){
public static void main(String[] args){
new Client("/tmp/text.log");
}

Does anyone have idea to write a shell script to
start, stop and restart a JAR under linux? That part isn't really clear.
Start would be java -jar myjar.jar.
Stop could either be kill, which kills the whole process; kill -TSTP, which suspends the process, or some application-specific communication such as sending something over a port; or putting something into a file or something.
Restart could just be the same as start (if stop is just kill); kill -CONT, if stop was kill -TSTP; or some other app-specific communication.

Shell script to start, stop and restart a JAR under linux

Hi everyone,
Does anyone have idea to write a shell script to start, stop and restart a JAR under linux? it can also indicate a method or parameter? Thanks!
this JAR inculdes a class with main method like this:
public class Client(){
public Client(String name){
public void stopClient(){
public static void main(String[] args){
new Client("/tmp/text.log");
}

Does anyone have idea to write a shell script to
start, stop and restart a JAR under linux? That part isn't really clear.
Start would be java -jar myjar.jar.
Stop could either be kill, which kills the whole process; kill -TSTP, which suspends the process, or some application-specific communication such as sending something over a port; or putting something into a file or something.
Restart could just be the same as start (if stop is just kill); kill -CONT, if stop was kill -TSTP; or some other app-specific communication.

Using cron to stop and restart password protected instance (App Server 7)

Similar Messages

Maybe you are looking for