Using desktop abroad

I am always using my HP laptop in Thailand but now I'm going to take my desktop. Can I just plug it in to the 220 current as I would do with my laptop? Many thanks!!

Hello @aree1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to use your desktop on a 220 current, and I would be happy to assist you!
According to the Product Specifications for your computer, the Input voltage can switch to a 200-240V/2A, which can function on a current of 220 V.
I hope this helps!
Best Regards, and have a great time in Thailand!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • How do i use Desktop PC (Mini Hdmi or DVI) to imac27 as monitor

    How do i use Desktop Pc through imac27 as monitor? first of all i dont want to use bootcamp. cos it dont run high end game, this is a reason i want to use my pc .
    my Graphics Card use Dvi or mini Hdmi, so which kind of Adapter to use and want full Resolution.
    Thx.
    p.s sry english not my first.^^)

    First of all, what do you mean by plug in one set of speakers on your PC? if am not mistaken the card has 3 plugs for a default 5. surround sound. Yes your card can do 5. surround soud, but for that you need to have the 5. surround sound speakers, otherwise well it won't be 5. To get any audio from your TV, or Satelite Box, you need these items and ste
    ps.
    Make sure your TV or satelite box has 2 RCA's female plugs labeled (Output) to deli'ver the sound to another device *(from your Satelite or TV to the now dead 5. surround sound)? 2. Your computer must be on at ALL times to transmit (or play) the sound from your TV or satelite box. 3 you need a?Y?RCA to 3.5mm plug jack cable (they are at allMart or Bull'sEye stores for 2$. its a cable that has the 2 male RCA's 's white 's red at one end, the other end will have the classic headphone jack *(you can always use this cable to transmit any audio coming from any device such as MP3, CD, DVD, Laptop, TV, and many other devices to your 5. surround sound in the living room or the computer) 4. Plug the Y RCA in the input port in your Audigy2Zs sound card. Make sure the Mic, and AUX are on mute, and that the Line In volume is at 70% and your TV, Satelite Box audio is at 50%. If its too low volume watch out, you'll be controling about?4 volume settings *(the TV or Satelite Box, the Line-In, Master Volume on the sound card, and Speaker Volume) 5 Sit back and enjoy!

  • HT201328 after unlocking usa/att iphone 3gs ,  how to use it abroad with a foreign company simcard and service?

    has an old iphone 3gs that was not in usage for awhle.  I called ATT and had it unlocked officially. After resetting it here in USA  I gave it as a gift to someone to use abroad  with forign sim card and phone service. 
    However, at the foreign company office they were told that USA iphones can not be used outside USA.
    Is that true?
    So How can they   use  it abroad?

    I'm fairly certain you should be able to use it abroad if it was unlocked by AT&T.
    Did you restore it as a new phone and get a screen that said something similar to "Congratulations, your iPhone is unlocked"?
    If so, it should work on just about any GSM carrier, though the other person would want to make sure their carrier supports the iPhone. I was able to use my US iPhone 4 in London just fine.
    They may not have full functionality for data speeds outside the US, but that's the only issue I can think of. And I don't think that would affect the 3GS since it can't use anything faster than 3G anyway.
    ~Lyssa

  • Add or edit address book using Desktop Manager

    Is there any way that I can add or edit my address book using the Desktop software? I would like to input email addresses and other information into my address book on my blackberry without having to type everything in on the blackberry. I was hoping there would be a way to do that on my PC and have it sync to my phone.

    he following steps will help you to configure synchronization -
    Connect your device using Desktop Manager and click on Synchronization
    From the menu on the left click Synchronization under Configuration
    Again click Synchronization button on the right which will give you option to Select Device Application that you want to synchronize
    Put the check mark and you'll get a prompt to Select Desktop Application
    Highlight the application name and click next button
    Under Synchronization Option you get Direction of Synchronization
    Check the radio button with Two way sync 
    Note: above mentioned steps are explained as per Desltop Manager 4.5
    Example: Synchronize addressbook -
    Connect you HH with your desktop Manager in your PC. If you device is set to wireless sync then you need to turn off wireless synchronization. To do so go to Address Book -> click Menu -> Options -> Wireless Synchronization: No -> click Menu and Save the changes.
    Click on the Synchronize button on Desktop Manager -> Click on Configuration Tab then click on Configure Synchronization -> Click on Choose under Address Book (on the right side of the pop up window) -> Click on you organizer apps (like, MS outlook, Lotus notes etc) -> Select desired apps -> select Synchronization radio button and click OK twice go back to Synchronize tab ->click on Synchronize Now.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • How to create Cross Tab using Desktop

    Hi Everyone,
    We use Sundard Banner (Universities) with Discoverer.
    I would like to create a Cross tab
    | Final Grade
    |_______________________________
    Course Title|
    |
    |
    Valid grade values are: HP - High Honors
    H - Honors
    P - Passed
    Suppose we had 3 students for class: Emergency Medicine
    George Washington - HP
    John Adams - HP
    Abraham Lincoln - H
    Would like query to look like this:
    | HP, | H | P
    |_________ |_____|_________________
    Emergency Medicine| 2 | 1
    |
    |
    Can this be done using Desktop, pls advise... thx, Sandra

    Hi Rod,
    Thx for your help.... I think I got it to work... Can I run the steps by you:
    a) create table query with: course title, final grade, count of final grade
    b) duplicated query as cross tab
    c) dragged course title to left
    d) noticed that Discoverer create a "field" - called data point for: count of final grade
    e) delete all vertical fields and just left count of final grade
    quests, please:
    ===========
    1) I tried a few times to create a cross tab before posting quest, and this is the first time that I see that
    Discoverer automatically created a field called datapoint for count of final grade. Do you have to follow
    a crosstab workflow carefully to the data point field to be created?
    2) what is definition of data point?
    3) Please confirm: The data point is located in the white space of the cross tab?
    4) Please confirm: When running the query, the values of final grades run across the top,
    including "blank" column for null value
    5) If (4), there is a column to tabulate rows with null values, why is the value 0, instead of an actual row count
    6) Under the various column values, is the name of the datapoint field running as a second heading row
    EH | H | HP
    Final_Grade Count | Final_Grade Count | Final_Grade Count | Final_Grade Count
    I will try to paste 3 screen shots below, using the "Plain text Help" box to the right of the screen
    thx again for your help. sandra

  • Bold 9900 won't update using desktop software

    hello,
    I have mountain lion on my Mac - using desktop software to update my bold 9900 to 7.1.0.2061.  
    It gets stuck after backing up third party applications and I get the error message - The device data could not be backed up, ensure that you can backup data on your device and try again.
    I have done a factory reset and still same message.  What is the problem?  It won't run the update at all.  Have backed up using blackberry protect as desktop software won't back up.
    Any ideas?
    thanks!

    This could be caused by a third-party application. Have you tried to uninstall non critical "exotic" apps before launching the backup process?
    Secondly, do you have enough space available on your computer hard disk?
    The backup function works as expected on my Mac for 3 different BB devices.
    Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

  • E-mail issue after using Desktop Manager

    I am a new BB user (Curve 8530). So I am confused with this issue. Couple of days back I connected phone to my laptop and used desktop manager (ver 5.0.0.11). I just wanted to explore the features of DM. After I disconnected from laptop, the company account emails stopped coming to the handheld nor I could send any from the company mail-id from the phone. I have configured gmail and hotmail on the BB. These were operational perfectly. Only the official mail-id was not getting synched. And I started getting mails with etp.data files in my outlook. The company BB admin guys resolved the issue. So everything was fine. But no one could tell what was wrong. So today I again connected to the phone to DM cause I wanted to move contact from outlook to phone. Now again, i have the same issue. No official emails on my phone. I am sure the admin guys will again solve the issue. But I need to know why is this happening, else i won't be able to use DM at all. can some one explain as to why this could happening. should i check/change any setting on phone or DM.

    I am not sure this could help, but when you first intalled DM, did you onfigure it for Enterprise Use? Are you running 5.0.1 or 6.0? In the 5.0.1 version, you had to set it up for BES use when first installing the software.
    Also, validate with IT the email and other security policies they have in place for BES users...
    I know I am providing more questions than solutions, but hopefully they will steer you in the right way...

  • Can't sychronise BB8520 using Desktop Manager 5.0.1

    When I try to synchronise my Blackberry 8520 using Desktop Manager 5.0.1 I get the following message:
    "Your computer must be connected to the internet to perform this operation. Please ensure that you are able to connect to the internet and try again."
    Well, my computer is connected to the internet (I'm writing this aren't I?!).
    Any ideas as to what the problem is,anyone?
    Thanks in advance...

    Hi and Welcome to the Forums!
    This KB has information about that message -- hopefully it contains something useful for you.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What is the problem when opening jpg files using Desktop API

    Hi, i would like to open jpg, or gif files using Desktop API, and the application crashes.The Desktop API is supported by my OS, because txt files, or file directories can be opened, mails can be sent, browsing is also supported.
    Only jpg and gif, and i think other picture formats cannot be opened.
    Obviously ACDSee and other picture viewing programs are installed in my computer.
    The corresponding application code can be found at the bottom of the page of http://www.awprofessional.com/articles/article.asp?p=661371&seqNum=2&rl=1
    my code:
    if(Desktop.isDesktopSupported()){
    Desktop desktop=Desktop.getDesktop();
    try
    desktop.open (fileToOpen);
    catch (IOException ioe)
    JOptionPane.showMessageDialog (frame,
    "I/O problem");
    catch (IllegalArgumentException iae)
    JOptionPane.showMessageDialog (frame,
    "File doesn�t exist");
    fileToOpen is obviously a File.
    Thx for the help in advance.
    Message was edited by:
    javahelps
    Message was edited by:
    javahelps
    Message was edited by:
    javahelps
    Message was edited by:
    javahelps

    My file association for jpg files is correct, if i click on a
    jpg, ACDSee starts immediately.Although I am a long time Windoze non-user, I vaguely remember that there's a difference between correct file-type association being set and some application starting at a mouse click on a file icon. I also vaguely remember Windoze file-type association mechanism uses a few action-types. Java Desktop should expect a specific action-type for the association.

  • Synchronize my Address Book using desktop Software Version 6.0 with the BlackBerry 8900

     Everytime I try to Synchronize my Address Book with the BlackBerry 89000 using desktop Software Version 6.0 it crashes. I try doing task and calendar they work just fine, just on the address book it seems to crash anyone else has this problem? Desktop 6.0 phone software 5.0

    Hiya!
     Please be a little more specific.
    What do you mean by crashes? Does your entire system shut down? do you get any error codes?
    Thanks!
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • Automatic file upload using desktop manager!!

    hi everyone! im new to this forum so dont knw how long it will take before people reply. lets give it a shot lol
    i just wanted to know if its possible to set up their blackberry manager in such a way that it automatically uploads files to to a computer once connected to a network?
    all sugestions will be much appreciated
    thanks,
    ricky

    You're welcome.
    Let's start with your device model, you've gotten to post that.
    But we gotta have some detail of what you're trying to do. In your first post and thread title you mentioned with using Desktop Manager, then you most recent post says without using any "middleman".
    You can use Bluetooth to transfer from the BlackBerry to the PC. You can use Desktop Manager for that, but not for document files like Word. You can use Media Manager for that transfer, but there's another middleman you don't want.
    Automatic? Maybe not. Even using a simple application on your PC like SyncToy will require some user interaction.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Update software without using Desktop Manager

    I'm trying to update my BB 8520 because it's been playing up (again) and I've tried using the desktop manger to update it but it doesn't seem to let me complete the update even though it says there is one. Is there anyway of updating it through the internet like a website or something, or does it have to be through the desktop manager? 
    Thanks. 

    See the link below for the download, and follow these simple installation instructions.
    First locate your carrier and the OS file you wish to use.
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Premiere cs4 exporting audio problem when I use desktop editing mode

    Hi.... I recently use a desktop editing mode when I create my new sequence ! I have a 480X270 16/9 ratio.... so when I export my sequence FLV in encoder... everything is ok for audio setting ... but when I put my movie on the Internet or just playback in adobe media player, I have no sound !!!! I don't know what is the problem....
    Thanks for help me !!!!

    Thanks for your quick respond and support !!!!!
    1- multiplexing = FLV
    2- audio default : codec mpeg layer III
    3 - i'm on pc
    4 - I use a jcplayer for my website and in local playback i use adobe media player
    I think that everything was ok in audio setting if i see my setting, but when i use a default sequence setting and I export I have sound.... when i use desktop sequence setting i lost my sound when i export !!!!!!
    is very strange !!!!
    Thanks again

  • If i have a new  2.2 macbook w/ leopard  can i use desktop remote 2.0

    if i have a brand new macbook with leopard installed can i use desktop 2.0 to control my emacs in my computer lab that are all running panther but are updated to 10.3.9
    windoze

    ARD 2.2 is not supported on Leopard. At least one user (raus), though, posted here that he got ARD 2.2 to work in Leopard. It's the same work-around Apple provided for ARD 2.2 to work on Intel Macs using Tiger. From the finder, navigate to:
    /System/Library/CoreServices/RemoteMangement
    From the folder, delete (or move) the ARDAgent v3.X file. Install the 2.2 update for ARD on the Apple site. (This may be optional; the original poster just reinstalled the update to be safe.) You can reportedly now run Remote Desktop 2.2 in 10.5. This works for PowerPC and Intel Macs.
    Note, though, that this is completely unsupported by Apple and may or may not work, or may cause issues. For proper support for Leopard, you need ARD 3.2.
    Good luck.

Maybe you are looking for