Using F4 Matchcode help when searching for SalesOrder in VB

Hi!
I have programmed a SalesOrder-search in VB 6 using the following code and it works fine:
Set FunctionCtrl = CreateObject("SAP.Functions")
Set funcOrderDetail = FunctionCtrl.Add("BAPI_SALESORDER_GETSTATUS")
funcOrderDetail.Exports("SALESDOCUMENT") = "0027100283"
If funcOrderDetail.Call = True Then
End If
Now I want to use the F4 search help like it is given in VA03. That means, I want to retrieve the SalesOrder-Number "0027100283" by giving PURCHASE_NO for example.
I tried using BAPI_HELPVALUES_GET_SEARCHHELP like this:
Set funcF4HelpDoku = FunctionCtrl.Add("BAPI_HELPVALUES_GET_SEARCHHELP")
funcF4HelpDoku.Exports("OBJTYPE") = "BUS2032"
funcF4HelpDoku.Exports("METHOD") = "GetStatus"
funcF4HelpDoku.Exports("PARAMETER") = "SalesDocument"
The result is the following line, but I think I'm on the wrong track:
VBUK;VBELN;D;0001;000000;000010;Vertiebsbelegnummer;Beleg;Vert.Bel.;VBUK
<b>Could anybody give me an example how to use F4 Matchcode search remotely in VB to find valid SalesOrder-Numbers for getting Details with BAPI_SALESORDER_GETSTATUS?</b>
Thanks in advance!
Thorsten

Dear Friends
Please help. If any one can guide me. Is it a standard functionality of SAP archivelink for Assign and Store.
With Regards
Mangesh Pande

Similar Messages

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

"Using the Filter HUD to Search for Referenced Files" (and "Locate Referenced Files")

I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.
I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this.
Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?
Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection in the left hand pane when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run either of these commands?
Thanks for any help in my getting this working better for me.

hotwheels 22 wrote:
I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do. 1
I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this. 2
Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at? 3
Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection {4} in the left hand pane {5} when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run {6} either of these commands? 7
Thanks for any help in my getting this working better for me.
1. Just copy and paste the URL from the on-line User Manual. Very helpful. Are you on this page?
2. From the above-linked page:
Show the Filter HUD by doing one of the following:
Choose Edit > Find (or press Command-F).
Click the Filter HUD button beside the search field in the Browser.
The instructions specify ONE of the following. Your question indicates to me that you are trying to do both.
3. The User Manual has used the wrong term here. It should say "Choose 'File Status' from the 'Add RULE' pop-up menu."
4. The command -- like all commands? -- works on the currently selected Images. On the same page in the User Manual it says:
You can select a group of images in the Browser and Aperture can show a list of the referenced images within the selection, including information about where the masters are located. {Emphasis mine.}
5. The Aperture workspace is highly configurable. I don't know what you mean by "the left-hand pane". Of what?
6. Yes. Of course it matters. At some point in the 80's when the GUI became standard computers standardized on the "Noun→Verb" syntax: Select object(s), select command(s).
7. Not sure what the second command to which your refer is.

Can't find my iweb domain file when searching for it in iweb seo tool

I am trying to get my iweb website recognized by Google. Can't seem to get the google html code to work in html snippet. So am now trying to use the iweb seo tool but can't find my iweb domain file when searching for it in iweb seo tool. My file is in user/library/applicationsupport/iweb/name.sites2
It shows in the folder but is not active, so I can't choose it.

The SEO ftp client is not what I'd recommend using. Once you add the metadata to a local copy of the files use a 3rd party ftp client like the free Cyberduck to upload the files. Much more reliable.
Google does not use keywords for it's searches although other search engines do. Create a test page on your site (leave it out of the navbar) and try adding Google Analytics to it with Wyodor's instructions. If you get it to work then all you need to do is copy and paste the HTML snippet from the test page into your site pages.
For information on visitors to your site you can also use StatCounter. It records the number of visitors and a lot more: where they are from, what browser used, which page visited and what site/page then came from for just a few. SC is easy to add to the pages as you get the code for your account, put it in an HTML snippet add the snippet to each page. Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet describes how to do it.
Again use a test page or a separate test site to work out the details before adding to your site pages.

Editor: Annoying pop-up for choosing main programs when searching for text

Hi,
We're upgrading to ECC60 and are getting frustrated when searching for text in a source code within the ABAP editor.
For every include contained in the main program you are searching in there is a pop-up asking to choose the main program for that include.
This can get crazy when searching in a standard SAP program such as SAPMV45A. You'll have to process through 30-40 of these pop-up windows before your search results appear. I each pop-up you have to scroll though dozens of main programs to find the one you are doing the search in.
Can this be turned of somehow to have the search functionality work as it did in previous version, where the Editor knows that the program you are launching the search from is the main program you want the results from?
Thanks,
Peter

HI Peter
Please check if program: <b>RPR_ABAP_SOURCE_SCAN</b> can help you...
Regards
Eswar

'Help cannot search for that phrase'

I am getting the message 'Help cannot search for that phrase' while searching for 'xml' in a chm (generated using RH9). The old CHM (generated using RH8) shows the results for the keyword xml. Is this a known issue? Any workaround to resolve this issue?

I just tried in a Rh10 project and got the same result in a CHM but not in WebHelp, there the search worked so I suspect it is something in the Microsoft Help Compiler.
There is a solution if you can upgrade to Rh10. That allows you to generate WebHelp and then convert it to a skinned CHM. I just tried that and there the search worked in the CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

TS4147 contact address not visible although data is present when searched for

I'm trying to view address information on an existing contact record but it is not showing, When searched for, it returns the relevant record but the data is still not visible. All contact info has been reduced to just phone no, email and notes.Help!

Hi Vetsrini,
Many thanks for offering to help. It has just been solved. It was a typo in the XML of the name of the column.
Doh! Obvious now that I know!
- Jenny

Creating new selection criteria when searching for PR

Hi,
Need help. i want to add selection criteria when searching for a Purchase Requisition (PR).
Currently, when u go to ME52N/ME53N, and you click on 'Other Purchase Request' then you click on F4 the following option are only available when searching for some criteria of PR.
Purchase Requisition per Asset
Purchase Requisition per Requirement Tracking Number
Purchase Requisition per Services
Purchase Requisition per Purchasing Group
Purchase Requisition per Order
Purchase Requisition per Cost Center
Purchase Requisition per Material
Purchase Requisition per Network
Purchase Requisition per Project
Purchase Requisition per Sales Document
my intention to add option perhaps like :
Purchase Requisition per Requestor (the one who created the PR)
Purchase Requition per Short Text
How can i achieve this? Thanks in advance.
She

Hi ,
Goto OS52. Press F4.
Enter thedevelopment class as ME.
Select MBAN, then Enter .
Click on Included Search Helps.
You need add your search.
Explain your requirement to ABAP team . They will help u in updating the search help.
Regards
Ramesh Ch

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

On iOS 8.3 there is no keyboard shown when searching for contacts on Contacts tab

I've updated my iPhone 5C to 8.3 and now I can't use the keyboard when searching for a contact from the Phone app. Using the Contacts app the keyboards works well. No 3rd party keyboards were installed. Anybody else having this issue?
Cheers,
Tamas.

Okay, several reboots solved the problem

Is it just me, or is this NOT how the new iTunes store is supposed to look when searching for a song, TV show, or app?

Take a look...that's just weird! When searching movies it looks fine, but when searching for songs, TV shows, or apps, this is what you get. Notice all the DI6 and SF6? I mean I know iTunes 11 just came out and all, but THIS kind of surprised me. Wanted to see if I'm the only one seeing this or if others see it too.

Ok, Apple has fixed it now

Authorization check when searching for transactions

Hi all,
We have a requirement to show only those activities for which a user is authorized. A custom authorization object has been maintained and the check in CRMD_ORDER has been extended accordingly. When opening an activity, the check is executed correctly, but when searching for activities, ALL activities are still shown, so the check is not performed at that particular moment. I have tested with standard authorization objects as well, but none of them are taken into account. Does anyone of you know how we can have the authorization check executed before or during the search, so that only those activities are shown, that the user may maintain as well.
Thanks in advance!
Regards,
Joost

Hello Joost,
Check if BADI CRM_ORDER_INDEX_BADI could not map your requirement.
Regards,
Frédéric

I wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

i wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

Reboot the device and see if the error happens again. Updating through iTunes is usually optimal, but the file size differs via Software Update on the device and iTunes (50MB vs ~800MB)

Using F4 Matchcode help when searching for SalesOrder in VB

Similar Messages

Maybe you are looking for