Using Gmail to send files

I have been trying to send a few numbers files to my gmail account. When I go to attach the file, all the numbers files that I'm trying to send seems "emptied".. i.e, they look whiter than the other files. This also means that I could not select them to attach. Anyone know how I can fix this??

Control-click a document in the Finder, compress or archive it, and attach the zip. Numbers creates packages which cannot be attached directly.
(36632)

Similar Messages

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

Why do i get an error 66 when i sent a mail use SMTP Email Send File.vi?

        When i use SMTP Email Send File.vi,it works very well for some special mail sever such as the sever of my company,For others,while debugging it ,i use a free email address from 163 (http://mail.163.com/) or Sina(http://mail.sina.com.cn/) i get an error 66.I use the default sever port number(incoming mail sever(POP3):110,Outgoing mail sever(SMTP):25).
Server information for 163:
   incoming mail sever(POP3)op3.163.com
   Outgoing mail sever(SMTP):smtp.163.com
Server information for Sina:
   incoming mail sever(POP3)op3.sina.com
   Outgoing mail sever(SMTP):smtp.sina.com
Thank you!

According to the LabVIEW documentation error code 66 is: "The network connection was closed by the peer", which is not very helpful. There could be a number of reasons why this happens. Could also be that the server was down. I had trouble connecting to one of the sites you listed. Does the server require authentication? I tried the links you provided, but they're in a foreign language and I can't read them, so I can't tell. If authentication is required, then the SMTP VIs provided with LabVIEW won't work since they don't handle authentication. If the server requires authentication you can try the updated OpenG SMTP VIs that I had posted in this thread.

HT203106 Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?

Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?

Yes.
Use AirDrop to wirelessly share content - Apple Support

Unzip file using PayloadZipBean in Sender FILE adapter

I am trying to unzip a flat file in Sender FILE adapter using PayloadZipBean.
I am getting mapping error. The problem is File adapter is reading data without unzipping. I am getting weird characters/data, so mapping error.
I searched all the blogs/ forum threads and help.sap.com, everywhere the focus is on zipping, not unzipping.
the file I have is with .gz extension, but I tried with .zip extension also.
Please help in resolving this issue.
Edited by: Gopal Janagama on May 2, 2008 11:42 PM

Gopal,
GZIP and ZIP format are slightly different, as stated here :
"GZIP compresses only one file and does not have a header. ZIP contains header information about what files are contained in the file."
So I'm not sure the PayloadZipBean supports GZIP format ... Try to ungzip and then zip its content and see if the bean works for it
Rgds
Chris

Problem when using keyfield in sender file content conversion

Hi all,
I am using FCC at sender side.
My recordset structure is as follow::
<MT_TW_TLOG>
<Transaction>
   ---<SalesItem> 1...unbounded
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleItem>
   ---<SalesReturn> 1...unbounded
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleReturn>
   ---<SalesTotal>
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleTotal>
   ---<SalesTender> 1...unbounded
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleTender>
</Transaction>
FCC specification that i have used is::
Recordset name::       Transaction
Recordset Structure:: salesItem,,salesReturn,,salesTotal,1,SalesTender,*
Recordset Sequencee::
Variable
Key field name::XF_TYPE
key fiel type::String(Case-sensitive)
then i have given following information::
salesItem.fieldnames ::all field names
salesItem.fieldSeparator::,
salesItem.keyFieldvalue::2
salesItem.processFiledNames::fromConfiguration
salesReturn.fieldnames ::all field names
salesReturn.fieldSeparator::,
salesReturn.keyFieldvalue::2
salesReturn.processFiledNames::fromConfiguration
salesTotal.fieldnames ::all field names
salesTotal.fieldSeparator::,
salesTotal.keyFieldvalue::2
salesTotal.processFiledNames::fromConfiguration
salesTender.fieldnames ::all field names
salesTender.fieldSeparator::,
salesTender.keyFieldvalue::2
salesTender.processFiledNames::fromConfiguration
My source file is a text file.
So when i am transfering following data,
scenario works fine.
PCTW,TWS001,2,1
PCTW,TWS001,2,10
PCTW,TWS001,3,2
PCTW,TWS001,1,3
PCTW,TWS001,4,4
Third field is my XF_TYPE.
But if i change the order of records as follows::
PCTW,TWS001,3,1
PCTW,TWS001,3,10
PCTW,TWS001,2,2
PCTW,TWS001,1,3
PCTW,TWS001,4,4
It fails at adaper monitor and throws following error::
2006-11-01 10:42:00 UTC: Error: Conversion of complete file content of 'try.txt' to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 3: missing structure(s) before type 'SalesItem'
Please provide some help on it.
Thanks & Regards,
Nilima

Hi Nilima,
Just go through this Weblog.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
and specially the hilighted ( circled text ) in this and its description below.
Hope this will be helpful
Reward if helpful.
Regards
Sachin

ALV truncation while download using List--Save/send--File--Spread sheet

Experts,
In ALV output, I am trying to download using menu item
"List --> Save/send --> File --> Spread sheet" then in the popup appears
here if i GIVE the FILE NAME THEN,material number is getting truncated.
If I don't give any file name it is storing as ".xls" and not getting truncated.
How to correct this or avoid this truncation.
OR
If we can't do correction about truncation ...my function consultant is asking to
to disable "List --> Save/send --> File".
Thanks in advance.
Sam

Solved by my own....
We need to pass
i_fieldcat-no_zero = 'X'.
so that the zeros at the end won't get truncated.

Using Flyer to send files over a Bluetooth connection

import mx.utils.Delegate;
import com.flyer.Bluetooth;
var connection_str:String = “127.0.0.1″;
var port_num:Number = 9100;
var connection_bt:Bluetooth = new Bluetooth();
var filePath_str:String = “E:\\photo_001.png”;
function sendFile():Void {
connection_bt.connect(connection_str, port_num);
status_txt.text = “Connecting to Python…”;
function onBluetoothConnect(success_bool:Boolean):Void {
if (success_bool) {
status_txt.text = “Sending file…”;
connection_bt.send(”sendFile” + “|”
+ filePath_str);
} else {
status_txt.text = “Connection failed.”;
function onBluetoothData(source_str:String):Void {
status_txt.text = source_str;
function onBluetoothClose():Void {}
connection_bt.onData = Delegate.create(this,
onBluetoothData);
connection_bt.onConnect = Delegate.create(this,
onBluetoothConnect);
connection_bt.onClose = Delegate.create(this,
onBluetoothClose);
sendFile()

is is possible to use a filestream to send files from
client to server? If so could someone show me some
example code or point me to a good internet
reference. i have done some searching and reading
but haven't found anything that showed it well.
thanks for the help in advance.The API descriptions for the 2 filestream classes gives the answer:
FileInputStream - A FileInputStream obtains input bytes from a file in a file system.
FileOutputStream - A file output stream is an output stream for writing data to a File or to a FileDescriptor.

Use Gmail to send from your other email addresses

hello,
i have setup gmail account on my Q10, but i can not use it's "send from other email addresses" functionality.
description of the situation:
i have my own domain with configured email forwarding to gmail account. i publically use only domain email address so in fact no body knows that this really goes to google. on the other side i have configured google to send from different account, so i use SMTP of my domain. in general it looks like gmail is just my mail application and mail storage - my domain has really thin limits. it has the advantage that i really send form my domain address, receiver sees only my domain address but the mail goes through google, so i use gmail's interface which i like and also message is stored in "Sent" folder of gmail.
the only idea which comes to me to configure similar setup on Q10 is to configure same account twice, but with different "from" address on the other account, but won't it be than i get double notification per one email?
regards,
mark

Hi all,
This can be also a general question without any connection to the Gmail service, and I formulate itt following way:
Is the email client of the bbq10 capable for sending emails with different from email adresses?
All the most popular email clients are capable for that, on a special way the former blackberry bold was also capable for that function!! I know, i used this function.
I have ca 10 email adresses, which are only aliases and all email will forwarded to one mailbox. That means only once downloaded, and when i reply to or forward an email i can always choose the from adress, as i would write from a different email account.
So whatsup dear blackberry service provider, are you one step back as also with the disappearing of the good old BIS service?
Despite of this i like bbq10 very much
Thanks for all kind of help

How to make sure that "hello" uses gmail to send the invites?

I am trying to invite someone to join a hello conversation but hello uses applemail in stead of my preferred gmail

hi klaus, please make sure that you have set gmail as preferred app to handle mailto:-links in the firefox options like it's described in [[Change the program used to open email links]]

Problem in Sender File Adapter using FCC with Variable structure

Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator           ,
HEADER.endSeparator           u2018nlu2019
HEADER.fieldNames               Key,x,y,zu2026
HEADER.keyFieldValue          1
HEADER.keyFieldInStructure      ignore
HEADER.fieldContentFormatting     trim
HEADER.additionalLastFields     ignore
HEADER.missingLastFields     ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333,   Cash Award ,20070801 ,20070831 ,df ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,sf ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
BTRL ,   5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya Verma

Hi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222,   r Cash Award ,20070701 ,20070703 ,TPV ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,TPV ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
EMPL ,0255555,   Cash Award ,20080301 ,20080320 ,TPV ,                          00000000027870 ,2007                                    , , , , , ,20080414 18:08:25,
EMPL ,0266666,   Cash Award ,20071001 ,20071020 ,TPV ,                          00000000020681 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0877777,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000036000 ,2007                                    , , , , , ,20080414 18:07:05,
EMPL ,0888888,   Leaver Cash Award ,20071201 ,20071231 ,TPV ,                          00000000157200 ,2007                                    , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV ,                          00000000153530 ,2007                                    , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV ,                          00000000012234 ,2007                                    , , , , , ,20080414 18:08:34,
BTRL ,   5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.

Failure to use Wallet to Send Emails

Hello,
I use Oracle 11.2.0.3 SOE, APEX 4.2.2 ... Listener 2.0.3 with Glassfish 3.0.2.
I am trying to use Gmail to send emails from APEX instance:
Host: smtp.gmail.com
Port: 465
Use SSL/TLS : Yes
Wallet Path: file:C:\app\Administrator\product\11.2.0\dbhome_1\BIN\owm\wallets\Administrator
Wallet Auto login is enabled .
I got the certificate from this website:
https://www.geotrust.com/resources/root-certificates/index.html
But in the Mail queue, I get this error:
ORA-28759: failure to open file.
So, how can I use Gmail to send emails from APEX ??
Regards,

Maybe this could help:
https://blogs.oracle.com/oracleworkflow/entry/using_gmail_smtp_and_imap
Thank you,
Tony Miller
LuvMuffin Software

Sender File adapter FCC

Hi
I have an excel file which I save as a csv extension. If I use FCC in Sender File Adapter, I need to add a module in my communication channel. Can anyone provide me with that?
Is this module generally deployed on XI server beforehand or do I have to write a java code and deploy it myself?
I have already had a look at this blog
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Vaibhav

You will have to create a module in this case.there is no standard module available for this fuctionality as of now.
Ref: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81 to help create a module.

Part of sender File name at the receiver side?

Hello All,
My requirement is like this.
iam picking the file from FTP server and place the file in another FTP server with out mapping.
I need to use part of sender file name to create the receiver side along with current date.
for example.
sender side file name : LM01000008.txt
recevier side file name need to generate : LM01dd/mm/yyyy
Please let me know how to achive this.
i tried with the blog given below, but partial file name is not possible with that blog.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0229698450DB11989196758750510369End?blog=/pub/wlg/6400
Thanks and Regards,
chinna

Hi Chinna,
Use this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
SimpleDateFormat dateformat = new SimpleDateFormat("yyyyMMdd");
String timestamp = dateformat.format(new Date());
String newfilename=fileName+timestamp+".txt";
// change to new file name
conf.put(key, newfilename);
return "";
Regards
Suraj

Using Gmail with my Orange email settings

I am looking to use Gmail with my Orange account seetings. The pop.freeserve.net server configuration works (recieve) fine but I cannott get the smtp.orangehomephone.co.uk (send) settings to work. The login details are correct but the Orange server takes too long to respond. Anyone help me please?

Hi There - Yes .... I am would like to use Gmail to 'Send' and 'Recieve' emails from my actual orange accoun to my gmail acoounr. *******@teribus.fsnet.co.uk - tmy [email protected] I can get Gmail to 'Collect' but not 'send' as the Orange servers take too long to respond? Thank you

Using Gmail to send files

Similar Messages

Maybe you are looking for