Using Guides for multiple Slides

Hello there,
my problem is as follows:
I want to be able to use Guides in Keynote for multiple slides. In other words: once I set up guides for one slide, I then also want to see those guides when switching to the next slide.
Why do I want to do that? Once I find a nice layout which I want to use throughout my presentation, eg. always a picture at a certain position, I want to use the guides to then help me to align pictures on all the other slides at the same position
Thx for any help!
Best,
Helio

Hi,
I think I've got it, the issue you have has been driving me nuts and I have tried all sorts (incl. the work-around as suggested by Gillian).
What I have discovered is that the guides placed on the master are on the slides – it's just they are not visible!!! You will see that when you move an object on the slide it will snap to a guide that you have placed on the master. Quite clever in a way but not practical in another way, so the work-around might still be a good way to help visually.
I'm aware this is not a great help, but at least it explains how the guides work.
Hopefully in the next release we will have guides that work like indesign!

Similar Messages

Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items

Hi All
    Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
NOte: Suggest me the Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
Regards
Shivakumar Bandari

Hi,
Here is the sample code to do that...
*---> po header data
wa_poheader-vendor    = your vendor..
wa_poheader-doc_type = Your doc type..check with Functional contact....
wa_poheader-purch_org = Purchasing Org..
wa_poheader-pur_group = Purchasing Group
*---> po header data (change toolbar)
wa_poheaderx-vendor    = 'X'.
wa_poheaderx-doc_type = 'X'.
wa_poheaderx-purch_org = 'X'.
wa_poheaderx-pur_group = 'X'.
*---> poitem data
data: item like ekpo-ebelp.
item = '0010'.
loop at t_parts.
it_poitem-po_item = '00010'.
IT_POITEM-PLANT    = Plant..
IT_POITEM-STGE_LOC = Sloc...
*---> poitemx (item data change toolbar)
it_poitemx-po_item = '0010'.
it_poitemx-po_itemx = 'X'.
IT_POITEMX-PLANT    = 'X'.
IT_POITEMX-STGE_LOC = 'X'.
*---> add record's to internal table
APPEND: it_poitem,
         it_poitemx.
endloop.
*call bapi_po_create1
CLEAR v_ebeln.
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      poheader         = wa_poheader
      poheaderx        = wa_poheaderx
    IMPORTING
      exppurchaseorder = v_ebeln
    TABLES
      return           = it_return
      poitem           = it_poitem
      poitemx          = it_poitemx.
*---> check the return table for error message
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc NE 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
endif.
Thanks,
Murali

How to use IWEB for multiple websites?

Okay.
I have two websites. One on a 3rd party, one on .MAC.
Computer 1 = .MAC website
Computer 2= 3rd party website
I want to use computer 2 to edit my .MAC website and moved the DOMAIN file but haven't open it in iWEB on the second computer as I need to know how to open and not destroy the 3rd party website.
How is this done?
Thanks.

You can rename the domain file to something descriptive of the site and open them manually. But I find it much safer to use iWebSites for managing multiple sites, over 25. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

Pls help me to create SO using BDC for multiple line items (VA01)

Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV45A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAK-AUART'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBAK-AUART'
                              'ZOR'.
perform bdc_field       using 'VBAK-VKORG'
                              '2000'.
perform bdc_field       using 'VBAK-VTWEG'
                              '10'.
perform bdc_field       using 'VBAK-SPART'
                              '05'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-WERKS(01)'.
perform bdc_field       using 'RV45A-MABNR(01)'
                              'hrpocf'.
perform bdc_field       using 'VBAP-POSNR(01)'
                              '    10'.
perform bdc_field       using 'RV45A-KWMENG(01)'
                              '                 55'.
perform bdc_field       using 'VBAP-WERKS(01)'
                              '2010'.
perform bdc_dynpro      using 'SAPLCEI0' '0109'.
perform bdc_field       using 'BDC_CURSOR'
                              'RCTMS-MWERT(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_field       using 'RCTMS-MNAME(01)'
                              'A_THICK_MM'.
perform bdc_field       using 'RCTMS-MNAME(02)'
                              'A_WIDTH_MM'.
perform bdc_field       using 'RCTMS-MNAME(03)'
                              'A_EQUIVALENT_SPEC'.
perform bdc_field       using 'RCTMS-MNAME(04)'
                              'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field       using 'RCTMS-MNAME(05)'
                              'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field       using 'RCTMS-MNAME(06)'
                              'A_COIL_INNER_DIA_MM'.
perform bdc_field       using 'RCTMS-MWERT(01)'
                              '3.2'.
perform bdc_field       using 'RCTMS-MWERT(02)'
                              '1200'.
perform bdc_field       using 'RCTMS-MWERT(03)'
                              'IS_11513_GR_D_1985'.
perform bdc_field       using 'RCTMS-MWERT(04)'
                              '26.4'.
perform bdc_field       using 'RCTMS-MWERT(05)'
                              '26.4'.
perform bdc_field       using 'RCTMS-MWERT(06)'
                              '610'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-WERKS(02)'.
perform bdc_field       using 'RV45A-MABNR(02)'
                              'hrpocf'.
perform bdc_field       using 'VBAP-POSNR(02)'
                              '    11'.
perform bdc_field       using 'RV45A-KWMENG(02)'
                              '                 66'.
perform bdc_field       using 'VBAP-WERKS(02)'
                              '2010'.
perform bdc_dynpro      using 'SAPLCEI0' '0109'.
perform bdc_field       using 'BDC_CURSOR'
                              'RCTMS-MWERT(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_field       using 'RCTMS-MNAME(01)'
                              'A_THICK_MM'.
perform bdc_field       using 'RCTMS-MNAME(02)'
                              'A_WIDTH_MM'.
perform bdc_field       using 'RCTMS-MNAME(03)'
                              'A_EQUIVALENT_SPEC'.
perform bdc_field       using 'RCTMS-MNAME(04)'
                              'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field       using 'RCTMS-MNAME(05)'
                              'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field       using 'RCTMS-MNAME(06)'
                              'A_COIL_INNER_DIA_MM'.
perform bdc_field       using 'RCTMS-MWERT(01)'
                              '3.1'.
perform bdc_field       using 'RCTMS-MWERT(02)'
                              '1250'.
perform bdc_field       using 'RCTMS-MWERT(03)'
                              'IS_11513_GR_D_1985'.
perform bdc_field       using 'RCTMS-MWERT(04)'
                              '20.084'.
perform bdc_field       using 'RCTMS-MWERT(05)'
                              '20.084'.
perform bdc_field       using 'RCTMS-MWERT(06)'
                              '610'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PDE3'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSNR(01)'.
perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                              'X'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\09'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-INCO2'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'VBKD-FKDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-TAXM1'
                              '1'.
perform bdc_field       using 'VBAP-TAXM2'
                              '1'.
perform bdc_field       using 'VBAP-TAXM3'
                              '0'.
perform bdc_field       using 'VBAP-TAXM4'
                              '0'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DELETE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DETAIL'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXVB'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'FDGFDG'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXBA'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\10'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-POSEX_E'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-POSEX'
                              '108128'.
perform bdc_field       using 'VBKD-BSTKD_E'
                              '3011192'.
perform bdc_field       using 'VBKD-POSEX_E'
                              '000005'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PDE3'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSNR(02)'.
perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                              'X'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\09'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-INCO2'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'VBKD-FKDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-TAXM1'
                              '1'.
perform bdc_field       using 'VBAP-TAXM2'
                              '1'.
perform bdc_field       using 'VBAP-TAXM3'
                              '0'.
perform bdc_field       using 'VBAP-TAXM4'
                              '0'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DELETE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DETAIL'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXVB'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'GFGFDG'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXBA'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\10'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-POSEX_E'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-POSEX'
                              '108128'.
perform bdc_field       using 'VBKD-BSTKD_E'
                              '3011192'.
perform bdc_field       using 'VBKD-POSEX_E'
                              '000005'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSEX'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'VBAP-POSEX'
                              '108128'.
perform bdc_field       using 'VBKD-BSTKD_E'
                              '3011192'.
perform bdc_field       using 'VBKD-POSEX_E'
                              '5'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=KKAU'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai east'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\02'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-KONDA'.
perform bdc_field       using 'VBAK-AUDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAK-VKBUR'
                              'IN15'.
perform bdc_field       using 'VBAK-WAERK'
                              'INR'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-KDGRP'
                              'CF'.
perform bdc_field       using 'VBKD-PLTYP'
                              '01'.
perform bdc_field       using 'VBKD-KONDA'
                              '01'.
perform bdc_field       using 'VBKD-BZIRK'
                              'NORTH'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\03'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-VSART'.
perform bdc_field       using 'VBAK-VSBED'
                              '01'.
perform bdc_field       using 'VBKD-KZAZU'
                              'X'.
perform bdc_field       using 'VBKD-VSART'
                              'ER'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\05'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-INCO2'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'VBKD-FKDAT'
                              '29.01.2008'.
perform bdc_field       using 'VBAK-TAXK1'
                              '1'.
perform bdc_field       using 'VBAK-TAXK3'
                              'l'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\09'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-ZLSCH'.
perform bdc_field       using 'VBKD-KTGRD'
                              '01'.
perform bdc_field       using 'VBKD-ZLSCH'
                              'c'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DELETE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_DETAIL'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXVB'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'BDFBFDB'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXBA'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\11'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=KSTC'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'J_STMAINT-ANWS(02)'.
perform bdc_field       using 'J_STMAINT-ANWS(01)'
perform bdc_field       using 'J_STMAINT-ANWS(02)'
                              'X'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'J_STMAINT-ANWS(03)'.
perform bdc_field       using 'J_STMAINT-ANWS(02)'
perform bdc_field       using 'J_STMAINT-ANWS(03)'
                              'X'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'J_STMAINT-ANWS(04)'.
perform bdc_field       using 'J_STMAINT-ANWS(03)'
perform bdc_field       using 'J_STMAINT-ANWS(04)'
                              'X'.
perform bdc_dynpro      using 'SAPLBSVA' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'JOSTD-OBJNR'.
perform bdc_dynpro      using 'SAPMV45A' '4002'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-TXT_VBELN'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'VBKD-BSTKD'
                              'open SO'.
perform bdc_field       using 'VBKD-BSTDK'
                              '29.01.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '100000'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '100000'.
perform bdc_field       using 'RV45A-KETDAT'
                              '29.01.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '29.01.2008'.
perform bdc_field       using 'VBKD-INCO1'
                              'EXW'.
perform bdc_field       using 'VBKD-INCO2'
                              'mumbai'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART    :Order Type
VBAK-VKORG    : Sales Org
VBAK-VTWEG    : Distri Channel
VBAK-SPART    : Division
VBAK-KUNNR    : Sold-to-Party
VBPA-KUNNAR   : Ship-to-Party
VBAK-BSTNK    : PO No
VBAK-BSTDK    : PO Date
VBAP-MATNR    : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG    : Qty
VBAP-WERKS     : Delivery Plant
VBKD-INCO2     : Incoterm2
VBKD-KONDA     : Price Group
VBKD-VSART     : Shipping Type
VBAK-TAXK1     : Cust Tax-1
VBAK-TAXK2     : Cust Tax-2
VBAK-TAXK3     : Cust Tax-3
VBAK-TAXK4     : Cust Tax-4
VBKD-ZLSCH     : Payment Method
VBAP-TAXM1     : Mat tax clss-1
VBAP-TAXM2     : Mat tax clss-2
VBAP-TAXM3     : Mat tax clss-3
VBAP-TAXM4     : Mat tax clss-4
VBAP-POSEX     : IMPS Order No
VBKD-BSTKD_E   : old SO in 4.6c
VBKD-POSEX_E   : old SO Item in 4.6c
Text Id        : TDC No
Text Id-ES10   : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.Lokesh

If u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra

Can I use SRST for multiple sites wit separate 911 lines

Is it possible to use an SRST (like a 2911 CME/SRST) to support multiple sites.
We have two sites next door to each other. They are connected by fiber with Cisco switches (vlans) at box sites.
Can I use a single SRST and have two separate 911 POTS lines setup so that each site has it's own unique 911 associated with it?
I can create two separate Voice vlans for the two sites and I could have both 29xx interfaces in use (one for each VLAN), but can I separate the dialing out function so that each vlan uses a unique POTS line this way?
Any other solutions other than two SRSTs?

We have to keep the 911 dialing the same at all sites since I already had an idea like that ...but we use 911, 9911 and 8911 for everyone to reach 911 so that they are not confused during an outage.
We will just have to bite the bullet and order 2901 SRSTs for all our small remote sites.

Using .vit for multiple instance

Hi,
I have a main vi, uses rendevous to run multiple subvis at the same time, that needs to be opened separately per user which need to open the same vi multiple times.
I tried to use .vit, changed main vi to vit. Created new vi that calls this main.vit. However this doesn't run multiple times, only opens the first window. Then I used subVIs as vit. This even creates a bigger problem. The sub vi's that opened doesn't run.
I think I'm missing some basic concepts of using vit. I searched the forum, found some articles but I can't find what I'm doing wrong.
Should main vit calling several sub vit's work?
Any tips, comments would help.
Thank you very much.

"CoastalMaineBird" <[email protected]> wrote in message news:[email protected]..
VIT is not for multiple instances, it is a TEMPLATE. That means you open it up, but when you go to save it, it pretends that it's untitled, and you have to give it a new name.
That's useful - for example, I have a TIMING TEMPLATE. When I want to time something. I open this VIT file. I insert the code I want to time into a certain frame, and run it. I usually don't save it, but if I do, I have to give it a new name.
That way, the next time I open it, it's fresh again.
If you want to run the same VI multiple times in parallel, you must:
- Understand what RE-ENTRANT EXECUTION means.
- Set the VI to use re-entrant execution.
- Use the VI Server to open each instance dynamically.
- Use the VI Server to CLOSE each instance dynamically.
- Be very careful about getting data into and out of the VI in question.
HTH
VI Templates can also be used to run multiple instances of the same vi. If you open a .vit dynamically several times, you'll end up with several instances of the vit. Actually, this is an intended use of the vi templates. And it works great. The great benefit over reentrant vi's is that the vi templates have front panels of there own. So it's great to use vit's when you want several similar panel, without copying the code. Reentrant vi's where not intended for this. Before 8.0, reentrant vi's didn't even have panels that updated properly, so you had to use a vit.
Regards,
Wiebe.

How to use Keychain for multiple users on one computer?

I have a new Macbook Pro with Yosemite. I just moved over from PC for my work computer and the Keychain thing is killing me! I am a social media consultant so I manage multiple accounts for multiple clients. I need a way to log in and out as them on many different platforms. The reality is that I am the only user but I log in and out of different things as if this was a public computer with multiple users.
PC allowed me a drop-down option with each login. For example the email box could be clicked and then I could select the client email that I needed to fill in. The password would then auto-populate. Is there any setting I can change to make this happen on a Macbook? I have been logging in, deleting the info in Keychain, then logging in for the next client, delete...etc.
Most password managers don't work because of this same problem. Please don't recommend a password manager app unless it can handle logging in and out of (for example)10 different LinkedIn profiles.
Any advice would be greatly appreciated!

Tanja Turtsanyi wrote:
I have a new Macbook Pro with Yosemite.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
Mac OS X (10.4)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Using iTunes For Multiple iPod's

Hey,
Anyone know how to use iTunes for two iPod's without the songs being erased and all that ...kind of like having two seperate library folders.
Thanks In Advance,

Well there are two way to go about this.
Number 1. Having seperate windows accounts, with iTunes on both, will give you seperate libraries.
Number 2. Set both iPods to update Automatically but to only the playlists you select. This will keep your playlists on it and whatever you don't want on there off. Same goes for the other iPod.
I myself use the number 2 option for my iPod Video and my Moms Nano. The only thind you got to remember, if you plan on updating or if you added new music and want it on your iPod, is to select the new playlist you made. This options works great

Use case for multiple crosstabs under one datasource

I'm trying to understand why one would have multiple crosstabs for one datasource. When I change one crosstab, it changes the other crosstab. I was could have a different layout for multiple crosstabs.
Thanks.
Regards,
Mel Calucin

Hi Mel,
I am not following this question; would it be possible to rephrase it?
You could have multiple tabs for a data source - such as a one tab showing the result set in a cross tab and the other for a chart.
Tammy

How to use DirectCast for multiple selected rows?

Hi<o:p></o:p>
Me.SecondBindingSource.DataSource = DirectCast(parentForm.FirstBindingSource.Current, DataRowView) works perfect for single items but how do I do it if I've selected multiple rows on datagridOne and want to pass only the selected rows to datagridTwo using DirectCast?
Me.SecondBindingSource.DataSource = DirectCast(main.FirstBindingSource.Current, DataRowCollection) does not work??<o:p></o:p>

You have to put the rows into a datatable. It is usually best if your original source is a datatable. The filter the original datatable. The selected rows of the datagrid are the same row numbers in the source datatable.
jdweng

Using Variables in Multiple slides

I am using a text entry box to record information.
I want the user to repeat that information in a future slide to get a match. I have created the action script for that.
On the second slide however, I would like the user to be able to view what they typed in the first tex entry box without returning to that slide. Like a hint.
Is their way to do that?
Thanks

Hello,
Perhaps you know that each TEB has an associated variable (better give it a more signicant name than the default one). I could offer you a workaround to show the value of this variable, but think that the most simple solution is to get a copy of the enhanced TEB, a widget created by Jim Leichliter, AKA CaptivatePro. Here is the link:
http://captivatedev.com/2010/09/08/adobe-captivate-widget-using-variables-in-the-default-t ext-of-a-text-entry-box-teb/
Have a look around on his site, he has a lot of enhanced widgets to display variables associated with TextArea, Checkboxes and RadioButtons widgets as well.
Lilybiri

Message Split using BPM for Multiple SOAP Receivers

hi,
I have a scenario where in i have to split the message coming from IDOC(SOURCE) to multiple SOAP(TARGET) receivers through BPM
I took a single file as a scenario and tested it. It worked fine.
I am using only a single output interface.
I have followed this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
but this blog has 2 output interfaces whereas in my case i just only one output interface that i want to route to multiple receivers based on the value in the PARVW in the IDOC.
Thanks,
Tirumal

hi ,
this is done using CONDITIONAL RECEIVER DETERMIANTION.
While doing your reciver determiantion, you can specify multiple receivers and also specify the condition on which the receiver is to be choosen.
Also, just check the last path of this blog for the same,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Regards,
Bhavesh

Versioning using manifest for multiple packages in a single jar

I am having trouble trying to use the package class to read the version of a specific package from a maifest that contains information about multiple packages. According to Sun specs, you should be able to include information about multiple packages by separating them with a Name. for instance, if my hierarchy is
com.a.b
|
|---com.a.b.c
and I include in the manifest file,
Manifest-Version: 1.1
Name: com/a/b
Specification-Title: my App package
Specification-Vendor: someone Inc
Created-By: someone
Implementation-Vendor: someone
Specification-Version: 1.1
Implementation-Version: build1
Implementation-Title: com.a.b
Name: com/a/b/c
Specification-Title: my App package
Specification-Vendor: someone Inc
Created-By: someone
Implementation-Vendor: someone
Specification-Version: 1.2
Implementation-Version: build2
Implementation-Title: com.a.b.c
Now if I try to read the specific attributes for package com.a.b.c using Package.getPackage("com.a.b.c").getSpecificationVersion();, I find this to be null. Has anyone had any experience with this?
thanks

OK I think finally have it. You have to have the trailing / like you metioned. In addition to that, you need to separate your attributes for individual packages with a newline. SO my manifest should really look like
Manifest-Version: 1.1
Name: com/a/b/
Specification-Title: my App package
Specification-Vendor: someone Inc
Created-By: someone
Implementation-Vendor: someone
Specification-Version: 1.1
Implementation-Version: build1
Implementation-Title: com.a.b
Name: com/a/b/c/
Specification-Title: my App package
Specification-Vendor: someone Inc
Created-By: someone
Implementation-Vendor: someone
Specification-Version: 1.2
Implementation-Version: build2
Implementation-Title: com.a.b.c
Thanks for your help, euxx

Using DMR for multiple GR line item

Hi,
I would like to ask for some clarification in using DMR.
For example is I have multiple line item for a GR with separate Inspection Lot Number. How will it be handled during DMR?
A scenario is for a example, I have 10 lot. First 9 lot skipped then 10th lot inspected, then if fail do normal inspection for the next 5 lot.
How will the system behave if GR is done at the same time for the 10 line item.
Thank you,
Raymond

Dear Raymond
Also there is another dimension to this. There are two type of timing fo Dynamic modification rule
1) Dynamic Modification at Lot Creation
For dynamic modification at lot creation, the quality level is updated when an inspection lot is created. The system assumes that the forthcoming inspection will lead to an acceptance of the inspection lot or characteristic.
An inspection lot, which is created immediately after the quality level is updated, uses the information in the updated quality level without a usage decision having been made.
If dynamic modification is carried out at lot creation and the inspection lot is subsequently rejected, the system updates the quality level again when the usage decision is made. The new inspection stage is used by the system to calculate the sample sizes for the next inspection lot.Changing the quality level does not affect inspection lots that were created in the meantime.
2) Dynamic Modification with the Usage Decision
For dynamic modification with the usage decision, the system updates the quality level when you make the usage decision. At this point, the system evaluates the conditions for an inspection stage change based on the dynamic modification rule and, depending on the results of the current inspection, it determines whether or not the inspection stage should occur.
Regards
Gajesh

Using Guides for multiple Slides

Similar Messages

Maybe you are looking for