Using Hookflash to set up conference calls in CUCM 7 with a Sip Phone

Hi all,
Not sure if I'm going the right way about this or if this is even possible, let me start by setting the scenario:
We have Cisco Unified Call Manager 7 and have recently installed an non Cisco IP based telephone in a boardroom which we have successfully registered to the Call Manager using SIP.
We would like to be able to setup audio conference calls from this SIP phone. It has a flash (hookflash) button which I believe can be used for this very purpose (it signals and offhook/onhook/offhook condition) which can be used to instruct a voice switch that it is requesting services (like conferencing).
However I'm strugging to see how to set this up.
Can anybody offer any advice on this subject?
Regards,
Martin

SG
Just an update to the question that I presented when I started this thread.
You really never did say what type of a User Account you are using in your Premiere Elements 8.0/8.0.1 on Windows 7? But based on the information provided by several users, User Account with Administrative Rights seems to be the way to go since all of them were using it and had systems that were running well. I would have expected that based on the Premiere Elements Windows XP requirements. I have yet to have someone come forward to say that they are using Premiere Elements 8.0/8.0.1 on Windows 7 with a User Account with Standard Rights and the program is running well. Will you be that one?
Besides me switching from Windows XP to Windows 7 in the near future, what motivated this line of questioning was the report that I had seen of a user with Premiere Elements 8.0/8.0.1on Windows 7 who was reporting "permission" error messages when trying to archive a project with the Project Archiver (Archiver "Trimmed" and Copy options). Further questioning brought out that the problem extended to the AutoSave feature as well. The user claimed to be saving to an external hard drive (formatted NTFS) with about 800 MB free space. And still further questioning brought out that the error message included a free space and/or permissions error. Yes, there were extremely large file sizes involved here (way over 4 GB)
The story had a happy ending where the remedies were:
1. User Account with Administrative Rights
and the major
2. Formatting the thought to be NTFS external hard drive from FAT32 to NTFS.
ATR

Similar Messages

  • Just set up advanced calling 1.0 and restarted my phone but "Video Calling" is not in my groups under contacts

    Just set up advanced calling 1.0 and restarted my phone but "Video Calling" is not in my groups under contacts

    iphone 6/6P do not support AC 1.0 HD video calling at this time.  It does support HD voice, but there is no HD indicator, but you can immediately hear the difference. 

  • Hi, haven't used iMovie in years.  I shot some video with my cell phone camera (Samsung Galaxy S2).  When I tried to make a movie, the clips I downloaded played back sideways on iMovie.  Is there any way I an flip the video from horizontal to vertical?

    Hi, haven't used iMovie in years.  I shot some video with my cell phone camera (Samsung Galaxy S2).  When I tried to make a movie, the clips I downloaded played back sideways on iMovie.  Is there any way I an flip the video from horizontal to vertical?  Thanks.

    You actually want a vertical video??
    What would you show that on?!
    Rotating video or photos in iMovie 11:
    http://help.apple.com/imovie/#mov3a884fd3
    In earlier versions of iMovie you can also do this using Quicktime Pro 7:
    Open MOV file in QT Pro (QT 7.6.6)
    Window -> Show Movie Properties
    select "Video Track"
    select "Visual Settings" from lower window
    check "Preserve Aspect Ratio"
    Click on appropriate rotation icon (MOV rotates!)
    Click back on the open MOV in Player Window
    FILE -> Save
    You can also do this using TransformMovie, available here:
    http://www.macupdate.com/info.php/id/21859

  • Incoming calls issue in Third Party SIP Phone

    Hi,
    Yesterday I configured my third party sip phone which is yealink in this case on cucm and successfully registered it with cucm, despite of registration i have some calling issue in this phone. I am able to make outbound calls from this phone to any other phone however issue is related to inbound calls.I tried calling its DN from anywhere but call disconnect after sometime. Also didnt get any proper sip session trace in RTMT. Kindly suggest some step to sortout this issue.
    Thanks

    Dear Manish,
    Call normally dicsonnected after 30-40 sec with termination code 102 in session trace. PFB SDI  trace with 5030 is Thirdparty sip phone and 5033 is c7945. Looking forward for your suggestion.
    CallingPartyNumber=5033
    |DialingPartition=
    |DialingPattern=5030
    |FullyQualifiedCalledPartyNumber=5030
    |DialingPatternRegularExpression=(5030)
    |DialingWhere=
    |PatternType=Enterprise
    |PotentialMatches=NoPotentialMatchesExist
    |DialingSdlProcessId=(0,0,0)
    |PretransformDigitString=5030
    |PretransformTagsList=SUBSCRIBER
    |PretransformPositionalMatchList=5030
    |CollectedDigits=5030
    |UnconsumedDigits=
    |TagsList=SUBSCRIBER
    |PositionalMatchList=5030
    |VoiceMailbox=
    |VoiceMailCallingSearchSpace=PT-LHR-LOCAL:PT-Local:Unityvmpt:PT-F6-Local:PT-ISL-LOCAL:PT-KHI-LOCAL:PT_Operator_LHR:PT_Operator_KHI:PT_Operator_ISL
    |VoiceMailPilotNumber=7103
    |RouteBlockFlag=RouteThisPattern
    |RouteBlockCause=0
    |AlertingName=Syed Ahmer
    |UnicodeDisplayName=Syed Ahmer
    |DisplayNameLocale=1
    |OverlapSendingFlagEnabled=0
    12:17:38.028 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 172.16.200.21:[5062]:
    [23928282,NET]
    INVITE sip:[email protected]:5062 SIP/2.0
    Via: SIP/2.0/UDP 10.100.200.11:5060;branch=z9hG4bK1ca0cc6e317649
    From: "Syed Ahmer" ;tag=8787406~039e2a80-8561-4586-8954-d01ed2aa12c8-246211918
    To:
    Date: Thu, 30 Jan 2014 07:17:38 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.5
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Send-Info: conference, x-cisco-conference
    Alert-Info:
    Contact:
    Remote-Party-ID: "Syed Ahmer" ;party=calling;screen=yes;privacy=off
    Max-Forwards: 70
    Content-Length: 0
    |14,100,50,1.14103336^10.163.14.4^SEP00230432C828
    12:17:38.028 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 0|14,100,50,1.14103336^10.163.14.4^SEP00230432C828
    12:17:38.028 |EnvProcessUdpHandler::fireSignal - SEND: index = 0, handler = 0xaf299320|*^*^*
    12:17:38.028 |EnvProcessUdpPort::fireSignal - SEND, destination = 172.16.200.21:5062|*^*^*
    12:17:38.028 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 850, 172.16.200.21:5062)|*^*^*

  • CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

    Hi Team,
    we are running CUCM 9.1(2a),
    we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
    Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
    When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
    Regards
    Ananthakumar

    Are A and B both Avaya phones?
    So it looks like you're not seeing the alerting name/connected name getting updated then?  Do you have alerting names configured on the directory numbers?  Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it.  Might just be something that needs to be tweaked in the 46xxsettings.txt file.

  • Can I use an iPad 2 3G bought in the USA with a different phone carrier in my home country?

    I intend to buy an iPad 2 3G  in the USA and bring it back to my home country (Chile) but I'm not sure if the broadband connection will work here with a phone carrier different from AT&T or Verizon. If somebody knows the answer please let me know as soon as possible as I have to buy the iPad this week.
    Thanks in advance.
    RB

    The ATT iPad model uses the GSM technology (VZ uses CDMA, which is used in very few places outside the US). Get the ATT iPad, you can plop in your local microSIM card, the iPad is not locked to ATT.

  • Conference call speakerphone

    I am trying to set up a way to use my iPhone during a conference call. About 20 people in one room with 8 calling in from a distance. I can get speakers hooked but is there any microphone available so that people at a distance from the phone can contribute? Any workarounds for this?

    There are Bluetooth speakerphones (intended for use in the car, but would work in a conference room, too). Those incorporate a speaker and a microphone.

  • Conference call on Asha 311

    Hello All,
    I am not able to make conference call from my Asha 311,whenever i try to use conference call option it says "Request Rejected".I am wondering if it is a Handset issue or Network (I am on AIrtel postpaid network,India).
    Please tell me if you people are able to make conference calls from Asha 311.
    Solved!
    Go to Solution.

    Well.. I don't think of why the operator won't allow you to make a conference call. Most of them (prepaid) allow you to make conference calls.
    But just as your phone says "request rejected", that means your network (Airtel Postpaid) didn't allow it to register the new call and it was rejected. Try contacting airtel for further details as to why they don't allow conferencing. Maybe you need to opt for a different plan which allows conferencing.
    @satya: Mate Vodafone also allows that. I've myself used it. So no doubts

  • Unable to diall corparate tollfree conference calls

    Please help with case. Issue description is as follows.
    1. My Z10 handset and my airtel SIM together - unable to dial conference calls that start with 000 800 ** ****
    2. My airtel sim in another handset, works
    3. Another SIM in my Z10 Handset works.
    Any help is appreciated.

    Hey vattokutraj,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    This issue can be resolved by your network service provider.  I would suggest getting a new SIM card from airtel.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Droid Incredible won't Conference Call - VZW Area Supposed Known Issue

    My Droid Incredible won't connect when you try to add in 2nd call. No one in my area can conference call with their Droids...not even the VZW Store Droid demo models or the reps there who have the Incredible. My friends have tried conference calling with their Droid's with no luck as well. VZW tech says its a known issue, and until Verizon pushes out update to our area - I'm out of luck! The rep said my options are that they can replace my phone with a different phone model or of course I can break my contract. Really? You want me to go to Apple and get your competitor's Iphone?

    With the Droid Incredible I do not have the SEND option once I am connected to the first party. I just have the END CALL button on my screen. I just got off the phone with Customer Service who reviewed the Tech support notes and she said according to the Ticket the issue is my area, and the way the Droid's are designed to conference call. The work around in my area is to hit SEND twice to connect the 2nd party, however she did state, as I can observe, that the Droids do not have the option to hit send on a 2nd call. My friend has a Droid X in my area and he too is unable to conference call. According to trouble ticket they cannot do anything for me. I am out of luck and my only option is for VZW to give me a new model phone, well we all know the only comparable phone is the Droid X which won't help me as it can't conference call either. With what I do, I need to be able to conference call and if I pay $300 for a phone with the feature, I expect Verizon to accomodate me so this just boggles my mind why Verizon isn't working hard to address this issue. So the only other alternative I see is to break contract and move to AT&T and get the Iphone, but I really do love my Incredible so this is a hard decision. Why is Verizon not working to address this issue? Who can I talk to???

  • Conference calling on 8830

    I have a question regarding the conference calling on 8830 with Verizon. When two people are on the line is it possible to end one of the calls without ending them both? I cannot seem to find a way to do this.

    The answer is "Yes, you can participate in conference calls". See: https://support.skype.com/en/faq/FA10654/what-features-does-skype-for-android-support
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Calls from cucm to CME not working-unknown number

    hi all
    we have cucm 9.1 and gateway 2911 on the side A and on the side B we have uc540 , we have configured tunnels between 2911 and uc540, calls from cucm SideA to uc540 Side B is ok and working fine. now we have one 9951 phone which gets ip from uc540 (side B) and tftp is our cucm IP.9951 phone is registered in cucm and calls from cucm to that 9951 phones are working fine. now problem is call is one sided between uc 540 local extension and ip phone 9951.
    9951 which is registered on cucm can call uc 540 user  but spa 504 phone which is registered on uc540 cant call to cisco 9951 phone gets error "unknown number"
    i am attaching debug voice ccapi inout with this
    kidnly help me to solve the issue ASAP

    here is show voice register all.i am surprised to see dial peer 20002 but there is no dial peer like that i dont know where its getting this dial peer 20002.extension 2002 is registered with my call manager.
    Router#sh voice register all
    VOICE REGISTER GLOBAL
    =====================
    CONFIG [Version=8.6]
    ========================
      Version 8.6
      Mode is srst
      Max-pool is 0
      Max-dn is 0
      Outbound-proxy is enabled and will use global configured value
      Security Policy: DEVICE-DEFAULT
      Forced Authorization Code Refer is enabled
      timeout interdigit 0
      network-locale[0] US    (This is the default network locale for this box)
      network-locale[1] US
      network-locale[2] US
      network-locale[3] US
      network-locale[4] US
      user-locale[0] US    (This is the default user locale for this box)
      user-locale[1] US
      user-locale[2] US
      user-locale[3] US
      user-locale[4] US   Active registrations  : 0
      Total SIP phones registered: 0
      Total Registration Statistics
        Registration requests  : 0
        Registration success   : 0
        Registration failed    : 0
        unRegister requests    : 0
        unRegister success     : 0
        unRegister failed      : 0
        Attempts to register
               after last unregister : 0
        Last register request time   :
        Last unregister request time :
        Register success time        :
        Unregister success time      :
    VOICE REGISTER DN
    =================
    VOICE REGISTER POOL
    ===================
    Router#

  • Using conference call dial in numbers with iPhone

    On my old Blackberry I used to be able to call a conference call dial in number and it was set up so that it would dial both the 1-800 number and then the participant code for the conference call. Anyone know if it's possible to do the same with the iPhone? Of course, with my Blackberry I was dialing in through clicking on the number in the actual meeting invite whereas with the iPhone I am dialing into a number in my contacts list since the iPhone is not yet compatible with Lotus Notes. Speaking of which, I've heard rumors before that the iPhone will one day be compatible with Lotus Notes. Anyone know when that might be? I've ditched the Blackberry but not having my email/calendar/contacts synced with my work system is a big pain.
    Back to the conference call question, I tried seeing if I could add a pause after dialing the 1-800 number so that it would dial the meeting password after connecting but that didn't work, even when I added like 10 pauses.

    CUCM does not have this capability, if you forcefully need users to enter a pwd you'd need to look into MP or do some UCCX/UCCE scripting for this.
    You can use Unity/CUC as a middle man so you can use a supervised transfer and then Unity will let you choose if you want to let someone in or send them to VM, but it won't ask for any passcode.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Conference call using Skype to go number

    I set up two Skype to go numbers to India. When it try to conference these numbers it says "Sorry we just had a Technical Problem". Can't we make conference call using Skype to go number?

    shalltoji wrote:
    Should I call it through the country code or plain?
    Hello,
    You must always prefix your dial string with the international country access code (+1 for USA, +44 for UK etc.).
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How can I initiate multiparty conference call using SX10 ?

    How can I initiate multiparty conference call using SX10 ?

    Same issue also!
    Thinking on Cisco IP Phones, It looks like Softphone template wasn't set up correctly, but SX10 don't have softphone template configuration.
    I also tried to put two SX10 in a call and call one SX10 from a third device (8961), no success. 
    SX10 admin guide, page 112, say it supports AdHoc conferencing with CUCM/Conductor/TPServer, but I always managed to make rendezvous conferences
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/administration-guide/sx10-administrator-guide-tc72.pdf
    Opened a PDI but they told me that they can't help with user-facing issues. As they were bought for lab we don't have contract to open a TAC. Someone have any clue?
    CUCM 9.1(2)
    SX10 TC 7.1.4
    Conductor XC2.3 (I don't think that this make any difference)
    Virtual TelePresence Server 3.1(1.96) (I don't think that this make any difference)

Maybe you are looking for