Using Larger Fonts For Simple Sign

I am creating a sign. Using Photoshop CS2 I was
very surprised when I tried to create a large character
of font size 1500. Error message noted the maximum was
something like 1296.
I did not think there was a limit.
How do people make huge signs with LARGE letters?
(a beginner)
Daniel :-)

Say on a layer I was working with the letter A
in font size 20. How would I use scaling exactly?
I guess I am a real beginner because I used FONT SIZE
until I started trying to draft a sign 20" wide by 30" high.
Thanks for this help.
Daniel :-)

Similar Messages

Will using larger font on iPhone effect email syncing with computer

Will using larger font on I phone effect email syncing with computer? ie: email to lage for page?

Thanks, I saved an email and for an unknown reason it appeared to large on the computer. Will see how it goes in the future. Cheers

5800 XM, Ovi Maps 3.03, larger fonts for street na...

I have a 5800 XM with Ovi Maps v 3.03. Is it possible to make the street names larger in size? The street names are only 1 milimeter in height in both 2D and 3D view, regardless of zoom level. I am aware there is the street name you are currently on in the center top section in a larger font size, which definately helps, but it would be nice to have the larger fonts for surrounding streets.
Also, is there a way to get rid of the white bar on the right side that houses the "search" and "menu" links? The 5800's screen is already small for GPS standards, and this white bar subtracts almost 1 cm of valuable screen real-estate. It would be nice to not have the white bar and have the "search" and "menu" links stay where they are, but perhaps have a white highlight around the letters or something like that.

Enjoy...
1.    install Font Creator Program 5.6 (Can use evaluation version)
2.   open ture type font what ever you like
3.   Do as attached JPG 1-2
4. Save & Exit
5. change font name to Nokia card \ cities\ font name and replace it (Can change different to names as more as your Nokia has)
Enjoy...
Attachments:
1.JPG ‏241 KB
2.JPG ‏223 KB

How to use Value Mappings for simple translations?

Hello,
I want to use Value Mappings for simple translations in mappings, e.g. from IDoc to Inhouse structures.
For example unit of quantity:
IDOC    -->    INHOUSE
PCE               P
ABC               A
How can I use Value Mapping for this? What should be used as Agency, what should be used for Scheme? What about groups? I tried the following: I created a new Value Mapping in Integration Directory:
- Source Agency: DELVRY05
- Source Scheme: MENEE (IDoc field name)
- Target Acency: INHOUSE_DESADV (Name of structure)
- Target scheme: UNIT (Name of field)
Then, in the table, I added several lines for translating PCE to P and ABC to A and so on. But I have to define a group name for each line. I used INHOUSE. But than I get one INHOUSE group for each line.
This seems very complicated for simple translations from A to B. I don't want to use FixValue in Message mappings.
Any help appreciated.
Thanks,
Christoph

Hello,
@pavan kumar: Thanks, but I know all Blogs about Value Mappings. That does not help me. And I refer to PI 7.1.
Lets get it very simple: I want to have exactly the same functionality of "FixValues" as ValueMappings. In 7.1, I need to define a Group for every row / line in the conversion table (e.g. for units of measurement conversion between IDoc and FlatFile). That does not make sense for me, as the Group is always the same, e.g. "Unit of measurement". So I will get dozens of same groups called "Unit of measurement".
I don't really understand the concept of Groups. Maybe this is just not appropiate for my intenses? Maybe the Group has to be defined as one specific value of Unit of measurement, e.g. "pieces"?
CHRISTOPH

I want to use larger fonts in toolbars.

How do I get Firefox to use larger fonts in the toolbars? I don't need larger icons but I have trouble seeing the text in the toolbars. I don't want to reset to a lower resolution. Thanks.

I also need larger text in tabs.

Using system fonts for commercial printing?

Hi,
Does anyone know the licensing rights/usage for using system fonts for commercial printing? If I understand correctly, system fonts that comes from operating system CAN be use because Apple purchase the rights on them and end users that purchase OS can use these fonts freely as long as not we are not redistributing them for profit, etc.
Can anyone point me in the right direction with official documentation on the subject?
Thanks!

Never mind, I found the answer. It's in Apple's OS EULA.
"E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included
with the Apple Software to display and print content while running the Apple Software; however,
you may only embed fonts in content if that is permitted by the embedding restrictions
accompanying the font in question. These embedding restrictions can be found in the Font
Book/Preview/Show Font Info panel."

Should I use dynamic SQL for simple updates?

Please tell me, out of the two options given below, which option should i use to update columns in a table and why?
what will be the performance difference between the two approaches?
Please note: The options given below is just for an example
procedure proc1(var1 varchar2)
is
begin
update tab1 set col1 = var1;
commit;
end;
procedure proc1(var1 varchar2)
is
sqlstr varchar2(1000);
begin
sqlstr := 'update tab1 set col1 = :v1';
execute immediate sqlstr using var1;
commit;
end;
Thanks
Arun

Arun G Nath wrote:.
Should I use dynamic SQL for simple updates? No way, not a chance.
Performance is not the issue (as long as you are using bind variables).
But with dynamic SQL, you loose compile time checking; you do not know until runtime if the SQL is valid.
You also loose the dependency between proc1 and tab1, which can be found only if you search user_source.
(And in either case, you probably want to remove the commit)
Regards
Peter

Need Larger Font for Music playlists or better Mp3 App

HI,
Im after a larger font on the playlists on the music player on Iphone, ipod etc..
Looks like it cant be done on this after searching around. Only option to increase size for texts, messages etc but does not change it on the music player.
Anyone know of a simple Music mp3 player that has a larger font/display also in the playlist.

tcphoto1 wrote:
I have had my iPad2 for about ten days and have just two issues with it. I would like to use a larger font in Safari's bookmark menu because it is not detecting my touch easily especially around the left third of the menu bar. Secondly, I have my older Epson printer set up with my Airport Express for wireless printing and my iPad2 cannot find the printer. I saw that HP is the only manufacturer that is listed with compatible printers. Is anyone else using other printers for Airprint or will I need to buy an App for wireless printing through the iPad2?
On the font size issue, I just pinch-zoom the text to make it larger.
On the printer issue, you might try the following script to "jailbreak" non-HP printers so that they work with Airprint.
http://digiex.net/guides-reviews/guides-tutorials/mobile-devices/8187-how-enable -airprint-any-printer-mac-osx-allow-your-ipad-iphone-use.html

Urxvt - use different fonts for different instances of urxvt

Hello. I use mcabber for IM which is a ncurses program. From what I understand, it is not possible to set font size for a ncurses program. Also urxvt uses .Xresources for configuration which sets the same font for every instance of urxvt.
So I want to ask if it is possible to write a script to start urxvt with a different configuration file and then start mcabber in it.
I understand that I can write a script to change font size in .Xresources and then use xrdb to merge the changes, but I do not understand how I can make that change local for only that instance of urxvt.
Thanks

Form man urxvt;
-fn fontlist
Select the fonts to be used. This is a comma separated list of font names that are checked in order when trying to find glyphs for characters. The first font defines the cell size for characters; other fonts might be smaller, but not (in general) larger. A (hopefully) reasonable default font list is always appended to it. See resource font for more details.
In short, to specify an X11 core font, just specify its name or prefix it with "x:". To specify an XFT-font, you need to prefix it with "xft:", e.g.:
urxvt -fn "xft:Bitstream Vera Sans Mono:pixelsize=15"
urxvt -fn "9x15bold,xft:Bitstream Vera Sans Mono"
I use it all the time.

Larger Fonts for the visually impaired ?

Hello Everyone !
Is there a way to make / use bigger fonts on an iPod Classic for visually impaired people ?
Thanks &
Take Care
Roy

Hi,
Pls check below link.
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/af/94c0417546cd17e10000000a155106/content.htm
Anil

Teststand message box larger font for 95 years old

Hi
I am working with people > 90 yrs.
the message pop up window occupied on top of the screen.
How can I help them by changing the font and/or color of the message pop up.
the real estate of the screen is there.
message pop up dominates the screen, nothing else matters
Please allow me to change the font for seniors with strained eyes.

Hi trout00
You have a couple different options for changing the font size of the message box. The first option is to change the native Windows message box settings. From Windows XP, right-click on your desktop and go to "Properties". Click on the "Appearance" tab in the Display Properties dialog box, and click on the "Advanced" button. In the Advanced Appearance dialog box, select "Message Box" from the "Item" drop-down menu. This will allow you to change the font of the message box text.
Your other option is to use a custom step type. This KnowledgeBase has more information on this option, including a link to an example program.
Russell G.
NI Applications Engineering

Is it legal to use iWork fonts for business?

Hey,
am I allowed to use the fonts in iWork for a business? I am going to found a new company so I have to design a logo, brochures,...!
I do not want to get sued by Apple for using their fonts illegaly
Thanks:)
Timon
BTW: I am form Germany so my English is not perfect!

Most of the fonts installed in the operating system aren't Pages components.
So it's not only the Pages license but the system one which must be studied.
The PDF whose subsets are posted above contain the terms of use in these languages :
Yvan KOENIG (VALLAURIS, France) lundi 13 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Using device fonts for printing

Hello,
I was wondering how to use device fonts in Java. These are the fonts that are in the printer and not in the operating system.
I'm writing some point of sale software that needs to use the Star TSP100 printer on Windows 7 64.
I need to use the device font "control" in order to instruct the printer to open the cash drawer.
I would also like to use the device font "3of9" for barcodes. I know there are alternatives to using this, but directly from the printer would be easier than trying to purchase and deploy a barcode font.
I know that star micronics has a JPOS implementation, but not for windows 7 64. And the JPOS with the StarMicronics bin is cumbersome and unstable for the end user even in Windows XP 32 bit.
If I specify the font "control" java replaces it with the default font. i.e. Font deviceFont = new Font ("control", Font.PLAIN, 8.5); is just the default font and not "control"

I did find a solution to my problem, but I cannot use device fonts. You may also find this useful to address your issue. I opened the a print service and sent ASCII to it instead of creating and printing a graphic object. You'll need the [Command Emulator STAR Line Mode Command Specifications|http://www.star-micronics.co.jp/eng/service/usermanual/comemu_starline_pm.pdf] to know what the commands are for the TSP100 and TSP700. I've included a cheat sheet to find the HEX value of the ASCII command. Note that if you need to send several characters you'll need to use the space with it.
e.g. The command to select font is ESC RS F you'll need to send: 1B201E2046
My Chizzle:
package recptpkg;
import javax.print.PrintService;
import java.awt.print.PrinterJob;
import javax.print.DocPrintJob;
import javax.print.Doc;
import javax.print.DocFlavor;
import javax.print.SimpleDoc;
public class openCashDrawer {
    boolean showStatus; // false if error
    public openCashDrawer() {
        showStatus = false;
        PrinterJob printerJob;
        PrintService psTSP100 = null;
        PrintService[] ps = PrinterJob.lookupPrintServices();
        for (int i = 0; i < ps.length; i++) {
            if (ps.getName().indexOf("Star TSP100 Cutter (TSP143)") >= 0) {
psTSP100 = ps[i];
if (psTSP100 == null) {
System.out.println("Aw SNAP! I like, can't find a printer with "
+ "Star TSP100 Cutter (TSP143) in the name");
showStatus = false;
try {
DocPrintJob job = psTSP100.createPrintJob();
String openDrawer1Command = ((char) 0x07) + "";
byte by[] = openDrawer1Command.getBytes();
DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE;
Doc doc = new SimpleDoc(by, flavor, null);
job.print(doc, null);
} catch (Exception e) {
System.out.println("Whoa bro. The printer is balls. Check it:");
e.printStackTrace();
try {
DocPrintJob job = psTSP100.createPrintJob();
String openDrawer2Command = ((char) 0x1A) + "";
byte by[] = openDrawer2Command.getBytes();
DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE;
Doc doc = new SimpleDoc(by, flavor, null);
job.print(doc, null);
showStatus = true;
} catch (Exception e) {
System.out.println("Whoa bro. The printer is balls. Check it:");
e.printStackTrace();
showStatus = false;
public boolean getStatus() {
return showStatus;
//ASCII Cheat Sheet:
/* 00 NUL | 01 SOH | 02 STX | 03 ETX | 04 EOT | 05 ENQ | 06 ACK | 07 BEL
08 BS | 09 HT | 0A LF | 0B VT | 0C FF | 0D CR | 0E SO | 0F SI
10 DLE | 11 DC1 | 12 DC2 | 13 DC3 | 14 DC4 | 15 NAK | 16 SYN | 17 ETB
18 CAN | 19 EM | 1A SUB | 1B ESC | 1C FS | 1D GS | 1E RS | 1F US
20 SP | 21 ! | 22 " | 23 # | 24 $ | 25 % | 26 & | 27 '
28 ( | 29 ) | 2A * | 2B + | 2C , | 2D - | 2E . | 2F /
30 0 | 31 1 | 32 2 | 33 3 | 34 4 | 35 5 | 36 6 | 37 7
38 8 | 39 9 | 3A : | 3B ; | 3C < | 3D = | 3E > | 3F ?
40 @ | 41 A | 42 B | 43 C | 44 D | 45 E | 46 F | 47 G
48 H | 49 I | 4A J | 4B K | 4C L | 4D M | 4E N | 4F O
50 P | 51 Q | 52 R | 53 S | 54 T | 55 U | 56 V | 57 W
58 X | 59 Y | 5A Z | 5B [ | 5C   \ | 5D   ] | 5E ^ | 5F _
60 ` | 61 a | 62 b | 63 c | 64 d | 65 e | 66 f | 67 g
68 h | 69 i | 6A j | 6B k | 6C l | 6D m | 6E n | 6F o
70 p | 71 q | 72 r | 73 s | 74 t | 75 u | 76 v | 77 w
78 x | 79 y | 7A z | 7B { | 7C | | 7D } | 7E ~ | 7F DEL */
{code}
Edited by: StoneBrooks on Sep 10, 2010 11:24 AM

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Larger fonts for the n70

Can anybody tell me if there is a way to install larger fonts on my N70, i have difficulty in seeing texts without my reading glasses and its not always possible to wear them. thanks
Soooo

If your Font Book doesn't list them check these sites:
Web Safe Fonts
Common fonts to all versions of Windows & Mac equivalents
Safe web fonts
OT

Using Larger Fonts For Simple Sign

Similar Messages

Maybe you are looking for