Using two backplanes together

Hi, can I use to backplanes together using just a Controller cFP-2020 or, if I wish use these two backplanes I'll need to use two Controllers cFP-2020?

cFP can only support 8 cards, so if you have an 8 slot backplane there is no point in getting another.
If you have a 4 slot backplane, you can try searching this site to see if NI has some sort of extension cable, but I doubt that.
In the future, you should post such questions to the Fieldpoint board, because you will be more likely to get an answer.
Try to take over the world!

Similar Messages

  • Using two thread together

    Helo. i develop a gps application .i use 2 threads for location updates and locationprovider status: i use thread like this: I
    public class LocationUpdater implements Runnable { // using for location updates
    public void run() {
    try
       catch(Exception ex)
             wait();
             su.notify();//su is a thread that i used for getting locationprovider  status }
        }}And the other one:
    public class StatusUpdater implements Runnable
    public void run()
      try
       catch(Exception ex)
             wait();
             t.notify();//tis a thread that i used for getting location updates
    Thread for providers' status doesn't run and the other one that updates location runs more slow.

    cFP can only support 8 cards, so if you have an 8 slot backplane there is no point in getting another.
    If you have a 4 slot backplane, you can try searching this site to see if NI has some sort of extension cable, but I doubt that.
    In the future, you should post such questions to the Fieldpoint board, because you will be more likely to get an answer.
    Try to take over the world!

  • Using two routers together and having problems

    i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...

    willlayb wrote:
    i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...
    Hi
    I Think u are missing something in between.
    Follow the Magic Link , and observe the steps.
    hope for gud .
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Usign two batteries together? Larger battery with better capacity?

    I am considering to buy a MacBook, and operate it entirely on batteries. I'm electro-sensitive.
    Is it possible to use two batteries together?
    It it possible to have a larger battery which lasts more time?

    It is not possible to install two factory batteries at the same time.
    But, it is possible to use two batteries together (sort of).
    For the PowerBook and iBook, there are after-market battery options that provide you with extended battery run-time.
    Essentially, they are large and flat batteries that are approximately the same length and width as the iBook or PowerBook.
    They are very thin, and essentially look like a small plate.
    Basically, they plug into the iBook or PowerBook's power port, and provide it with power just as if it were plugged into the wall.
    So, the computer believes that it is getting power from the wall adapter. Then, when that battery drains, it moves onto using the standard battery.
    One such device is available here:
    http://www.lindelectronics.com/cgi-bin/store/shop.cgi//ppack/x/dbxgen_ppackmfgs/
    There are many different companies that I have seen selling these types of devices. So, you can look around.
    I don't expect that there are any available for the MacBook or MacBook Pro yet (since they use a different style connector). But, I imagine that such an option will appear in the future.
    Hope this helps.

  • Using Sections To Tie Two Rows Together

    I use the section capability to join two rows together.  I have a button that will duplicate the section.  Which on the screen shows perfectly.  However, when you save the file, and open it back up it does not maintain those sections.  It combines them into one.  look at this example:
    TABLE 1
    ROW 1: element1, element2               -- Row 1&2 are group as a section
    ROW 2: element1, element2
    User press the add button:
    Table 1
    ROW 1: element1, element2                -- So when the user press the add button it duplicates the section to add two more rows in order
    ROW2: element 1, element2
    ROW3: element 1, element2
    ROW4: element 1, element2
    The user now saves the form and exits...
    The user lanuches reader and opens the form. they see the follow result...
    ROW1: element1, element2
    ROW3: element1, element2
    ROW2: element1, element2
    ROW4: element1, element2
    I need the section to stay together...  Any suggestions of what can be done?
    Regards

    Uncheck the checkbox for the "Repeat Row for each Data Item" in the Bidning tab for Row2 and Row3 inside the Section.
    You are actually creating a new instance of the section (which includes Row2 and Row3). So this check box should be checked at the Section levl not at the Row level. You have already checked the Section property so remove from Row 2 and Row3.
    Thanks
    Srini

  • Using two bluetooth adapters (not devices) together in OSX?

    I was wondering if its possible to allow OSX to use two bluetooth adapters at the same time? In windows, when you plug in two adapters, it places two bluetooth icons in the system tray. It seems when I try this with OSX, the main adapter is used, and the secondary adapter gets listed as a keyboard im guessing, as a window pops up saying it doesnt recognise my keyboard (even though i own no bluetooth keyboards), and it shows up with an improper mac address with the main bluetooth adapter, but not as its own. Is there any way to make OSX notice the second adapter?
    EDIT: I guess I should specify my reasoning for this. on windows, because of the way bluetooth works, ps3 controllers need to isolate the bluetooth adapter, rendering a bluetooth adapter solely for the ps3 controller. obviously this works in osx without isolation, but I noticed that since the ps3 controller pairs by mac address, using the same adapter results in only having to pair the controller to osx and windows once, rather than having to pair each time i switched between systems. Also, I would still like to use the second adapter as its own for pairing other devices.
    Message was edited by: unvaluablespace

    Hi,
    Thank for posting in Microsoft TechNet Forum.
    Based on my research, two Bluetooth adaptors can work at same time.
    In your case, the major problem is the dongle can’t start. I suggest you could test if the new Bluetooth adapter could work in another computer?
    Meanwhile, the Code 10 error pertains mainly to hardware and device driver issues or to compatibility issues between hardware drivers and additional software
    that is installed in Windows. Therefore, we recommend that you troubleshoot these issues by focusing on device drivers, on device configuration issues, and on hardware compatibility issues.
    I recommend you could refer to:
    Description of Code 10-related errors that Device Manager generates in Windows-based computers
    Hope it helps.
    Regards,
    Alex Zhao
    TechNet
    Subscriber Support in forum. If you have any feedback on our support, please contact
    [email protected]
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Mini Displayport to S-Video using two joined DVI adaptors?

    I have a 13" MacBook with the mini displayport. I am attempting to connect it to an external display (Samsung plasma monitor). I have connected two adaptors together: (minidisplay--DVI) + (DVI--Video), and have tried running both video and S-video cables from that into my Samsung, without success.
    The MacBook does not seem to recognize that anything is connected to the mini displayport; the MacBook screen goes blue very briefly when I plug or unplug, but other than that there is no indication. I have tried powering off, sleeping/waking, and plugging/unplugging on both ends. I know the video input port on the Samsung is good (I believe the S-video port is good but can't prove it), and I know the video cable is good.
    Has anyone had success with this setup? Does joining the two adaptors (both purchased from Apple) create a problem? Or is it set up correctly and an indication that one or both of the adaptors is malfunctioning? Any suggestions appreciated.
    (Note: yes, there is a VGA port on the Samsung, but it's wall mounted and virtually inaccessible. I am using video inputs on side of device).

    With the advent of the Aluminum MacBook, Apple stopped supporting video and S-video out. You will either need to use VGA or else something like this:
    http://www.monoprice.com/products/product.asp?cid=101&cp_id=10114&cs_id=1011407&pid=4724&seq=1&format=2

  • Using two facts of two different star schemas and conformed dimensions

    Hi,
    I've been working as developer and database designer for years and I'm new to Business Objects. Some people says you can not use two facts of two different star schemas in the same query because of conformed dimensions and loop problems in BO.
    For example I have a CUSTOMER_SALE_fACT table containing customer_id and date_id as FK, and some other business metrics about sales. And there is another fact table CUSTOMER_CAMPAIGN_FACT which also contains customer_id and date_id as FK, and some  other business metrics about customer campaigns. SO I have two stars like below:
    DIM_TIME -- SALE_FACT -- DIM_CUSTOMER
    DIM_TIME -- CAMPAIGN_FACT -- DIM_CUSTOMER
    Business metrics are loaded into fact tables and facts can be used together along conformed dimensions . This is one of the fundamentals of the dimensional modeling. Is it really impossible to use SALE_FACT and CAMPAIGN_FACT together? If the answer is No, what is the solution?
    Saying "you cannot do that because of loops" is very interesting.
    Thank you..

    When you join two facts together with a common dimension you have created what is called a "chasm trap" which leads to invalid results because of the way SQL is processed. The query rows are first retrieved and then aggregated. Since sales fact and campaign fact have no direct relationship, the rows coming from either side can end up as a product join.
    Suppose a customer has 3 sales fact rows and 2 campaign fact rows. The result set will have six rows before any aggregation is performed. That would mean that sales measures are doubled and campaign measures are tripled.
    You can report on them together, using multiple SQL passes, but you can't query them together. Does that distinction make sense?

  • How to use two different network cards on RT?

    Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
    So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
    For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
    Thanks for your help!
    Solved!
    Go to Solution.

    Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
    As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
    Thanks

  • How to use two different packages which in  different directories?

    In my progrom, I'm using two differnet packages that in two different directories, but if I use classpath , the program can only be in one environment, so what can I do?

    or you set your classpath to the first common dir they have, and specify the packages from that dir on...
    or you just simply copy (you don't have to move it) the one package together with the other package...
    by the way you can add multiple paths to your classpath...
    between the paths you specify a ";"
    if i'm not mistaken...
    SeJo

  • How do I connect two lines together.

    I have two lines at an angle but where the corner of the angle is supposed to be there is a little triangle missing. I tried joining the two lines together but when I hit join one line goes past the other.
    Before Joining:
    After Joining:

    There is no need to lock one of the paths, because you do not have to tediously select endpoints just to join paths. Doing so was necessary in Illustrator for most of its history, but it finally (decades behind other drawing programs) gained the ability to join paths at their nearest endpoints by just selecting the paths.
    Undo (or cut) the unwanted join.
    Black pointer: Select the left and right paths.
    Join.
    Alternativley, when drawing line art, it is not uncommon to set your default Graphic Style to use rounded endcaps. That negates the problem of the "missing triangle" (as you call it) appearance of coincident straight end caps.
    JET

  • Can I use two 4GB SO DIMM DDRIII 1333 with my MacBook Pro Mid 2010???

    Hello you guys.
    I am working with a Mid 2010 Macbook Pro 2,53 GHz Intel Core i5, 4 GB 1067 MHz DDR3 an want to upgrade RAM to 8GB.
    Can or should I use two 4GB SO DIMM DDRIII 1333 Units, or will that kill my Book and I better use two 1066 Units?
    Can also someone recommend a fabric that works best?
    Thanks in advance,
    Philip (Germany)

    Have just upgraded my Macbook Pro 6,2 from the original 4 GB to 8 GB. The replacement RAM specifies 1333 MHz on the box, together with a smiley Mac face, and it works great, although at the lower bus speed as you would expect.
    This is what the vendor site states:
    Strontium 4G Single Notebook SO Dimm DDR3 1333,204 Pins For Mac ( SRA4G86S1-H9H )
    Memory Slots:
      ECC:          Disabled
    BANK 0/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x8783
      Part Number:          0x5352413447383653312D4839482020202020
      Serial Number:          0xED480B00
    BANK 1/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x8783
      Part Number:          0x5352413447383653312D4839482020202020
      Serial Number:          0xC4450B00

  • Linking two accounts together

    Are you able to link two accounts together.  For example, I have had an account for a long time, but now my husband has one as well as my son.  My son is currently signed in with my account but I would like to give him his own as well as share what I have with my husband.
    Thanks,
    Stephanee

    Sorry, but it is not possible to merge iTunes Store accounts. You can, however, use content from multiple iTunes Store acounts on any given system or device. You just have to authorize the device to each account. You will have to use the account though which any item was purchased for redownloading, app updates, etc.
    Regards.

  • Moving two motors together.

    Hi all,
    I'm using MID-7604 motion controller that is driving a set of motors.
    I wish to move 2 motors in tandem.
    Can anyone suggest links to how this is done in Labview?
    Does the hardware actually implement this in parallel, or does it internally serialize it?
    Is there a performance issue with doing this vs moving the motors sequentially?
    Thanks,
    cosmund

    cosmund,
    there are several ways to move two motors together. One option is to configure a vector space that contains both axes and  configure your moves for a vector space. Please refer to the shipping examples (e. g. Two-Axis Vector Move with Position Monitor.vi). Axes in a vector space always start and stop at the same time.
    Another option is to configure the move constraints for both axes independently and use a single instance of Start Motion.flx to start both axes at the same time. You will have to use the Axis/VS map parameter and set the Axis or Vector Space parameter to Axis Control.
    The third option is to use electronic gearing. In this mode you only have to control one axis and the other one will follow with the gear ratio specified by you. Please refer to the shipping examples (e. g. Master Axis - Slave Axis Gearing.vi).
    I hope that helps,
    Jochen Klier
    National Instruments
    P. S.: If you need further information, please add the NI-Motion device type (e. g. PCI-7340) to your next post.

  • What Router Would Be Best If Using Two PlayStation 3 Consoles?

    What Router Would Be Best If Using Two PlayStation 3 Consoles That  Are Connected To The Same Broadband Internet Connection? My Two Cousins Aren't Able To Connect To The Same Lobby Party Together As I Am To Play COD MW3. They Have Tried Having Both Consoles Hardwired to the Router But The Same Problem Of Having Only One Of My Two Cousins To Be Able To Connect To The Lobby Party While The Other One Can't Connect.  Thanks For Any Help With This Issue.

    My router easily handles 2-4 PS3s at a time during Uncharted multiplayer and its a few years old.  Its a Linksys Wireless N (model no. WRT150N).  Like I said, its not the newest but it handles all our consoles just fine.  My internet speed is 24mbps, maybe your cousins need a faster connection? Hope this helps.

Maybe you are looking for