UTF8 source files course errors

I have source files encoded as UTF8 which compile and run fine, however JavaDoc is not happy about it. I've used:
javadoc -encoding "UTF8" -charset "UTF8" -docencoding "UTF8" myPackage
What's the correct way?

You might try spelling it with a dash "UTF-8".
I believe UTF-8 is an encoding, not a character set, so you
would use:
javadoc -encoding "UTF-8"
You would use -docencoding if you want the HTML files to
also be in UTF-8.
Please let us know how this works.
-Doug Kramer
Javadoc team

Similar Messages

  • Archive Source Files with Errors, Option Does not work

    Any one tried "Archive Source Files with Errors" on the
    sender adapter. It shows no effect.
    1.We are on SP19.
    2.Adapter type : FTP adapter.
    Steps for the Reconstruction 
    1. Configure a sender FTP adapter.
    2. choose the option "Archive Faulty source files"
    3. Specify a directory for "Directory for archiving Files with Erroors"
    4. Send a file which can cause File Content conversion errors.
    Regards,
    Raj

    Hi,
    FYI
    I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
    In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
    Rgds,
    Moorthy

  • Archive Source Files with Errors

    Hi All,
    I need to archive my sending file in repective directory, if it has errors..
    It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
    What is permanent error?
    For example if my input file name is abc.txt which containg 3 fields id,name,address.
    i have configured sending file adapter with FCC .
    now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
    but this is a error.Asper FCC i have given only 3 fields..
    so this error file has to archive in so and so folder.
    If i check <b>Archive Source Files with Errors</b> parameter in sending file adapter.
    and specified the specified directory.
    but its not working for me. file is not picking but its not coming in the archive folder.
    In library it is mentioned to see message transfer bean link.
    there i found <b>Transform.PermanentErrors: True/False</b>.
    If we have not used message transfer bean then, in that case will this parameter <b>archive source files with errors</b> will work for FCC?
    Please suggest me .
    I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
    Thanks in Advance..
    Regards,
    Reehan

    Reehan,
    I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
    Good luck!

  • Use of "Archive Source Files with Errors" for BIC module error

    Hi All,
    I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
    My question is if the input file caught in error with BIC Module e.g
    "MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
    can we move these errornous files to another directory using Processing parameter  "Archive Source Files with Errors" available with Sender File Adapter?
    In File Adpater my Module tab looks like :
    1     localejbs/CallBicXIRaBean     Local Enterprise Bean     bic
    2     localejbs/CallSapAdapter     Local Enterprise Bean     0
    In my scenario  , its not working..  do we have any other option to achive this?

    Hi Jyoti,
    I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
    Regards,
    Prateek

  • "Archive Source Files with Errors"  feature - how to?

    File sender adapter has a feature to  Archive Source Files with Errors.
    I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
    How can I use the  Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
    Regards,
    Amol

    Hi,
    if you see whats mentioned on the help link
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
    it says:
    To archive source files where a permanent error occurred during processing, set the indicator.
    A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
    does this not mean it could be used with errors raised in adapter modules? ideally it should be.

  • Source file read error for sqldeveloper

    While downloading SQLDeveloper, after almost 70%complete, i got an source file read error.
    i've tried again to download but the page hangs on the license agreement page after clicking I ACCEPT.
    Please resolve this issue.
    Thanks in Advance
    Using:
    MS Win XP Home
    Firefox 1.5.3
    Tony Garabedian

    sybrand_b wrote:
    Why are you assuming utl_file works with binary files? It doesn't!It does in 10g, where file open mode B was introduced. But even with R mode you should be able to open DOC file. You might (or might not) have problem reading it:
    SQL> declare
      2      fh UTL_FILE.FILE_TYPE;
      3      input_buffer varchar2(4000);
      4  begin
      5      fh := UTL_FILE.FOPEN('TEMP','Stats.doc','r');
      6      UTL_FILE.GET_LINE(fh,input_buffer,4000);
      7      DBMS_OUTPUT.PUT_LINE(input_buffer);
      8      UTL_FILE.FCLOSE(fh);
      9    exception
    10      when others then UTL_FILE.FCLOSE(fh);
    11  end;
    12  /
    ÐÏࡱᠠ              >  þÿ                 2          4      þÿÿÿ    1
    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿì¥Á €    ð¿             ¸
    PL/SQL procedure successfully completed.
    SQL> SY.

  • File Adapter - Archive Source Files with Errors.

    Hi All,
    Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
    Cheers,
    Kushi

    Hi Kushi,
    To configure Sender File Adapter what you can do is:
    1. Create one Communication and select the adapter as File.
    2. Select the radio button Sender.
    3. Enter the source directory e.g. /temp
    4.Enter File name e.g. xi_test.xml
    5. Under Processing parameters Chose the processing mode as "Archive" from
    drop down box.
    6. Enter the path where you wnant to archive your file.
    7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
    8. Enter file type "Binary" if your source file is XML.
    9. Check if Adapter status as "Active".
    Note: Archiving the file is regardless of erorr in file.
    It will archive all the source file.
    Regards,
    Sarvesh
    ****Reward Points, if found helpfull.

  • How to Archive Source Files with error in XI ?

    Hi,
          How to archive source files where a permanent error occurred duing processing? and how to set it?
    Thank you in advance.
    Yinglak

    Hi,
    What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
    Archive Directory is used to store the sender files what ever  data ur sending ........not for only error records.
    Regards,
    Phani
    Reward points if Helpfull

  • FCC source file gives error in mapping

    While doing File Content Conversion Text to(XML) : Multiple Records occurring in SXMB_MONI and Receiver Channel not working(Mapping Error). Please can anybody tell me how to correct this error or how to proceed.

    Hi
    can u please provide which FCC parameters u r using  at the sender side.
    to check ur mapping error just go to the sxmb_moni take the input payload from the moni , copy the payload and then copy that paylod in the test tab in the mesage mapping it will give the error at some node or field level and u will come to know about the error.
    if u still face the problem please reply me back.
    Thanks
    Rinku

  • Archive Source Files with Errors is Missing

    Hi
    I don't have this option or "Handling of Empty Files" available in ID on my Live or QA Servers although I do have on my Dev. They are all on the same SP and Patch Level 7.0 SP 14. Any suggestions ?
    Thanks

    Hi Thanks for the replies .. I found out there was a difference between the CIM Model between the environments, which has been now levelled. Folloing this I refreshed the CPA cache and I reimported the SAP BASIS 7.00 component but no joy. In the IR If I right click on the SAP BASIS BASIS package on my dev environment -> Display Support Package It displays SPS 9 and SPS 10. If I do the same on my QA env then it displays only SPS 9. This is surley where the issue is but I do not know how to rectify. Any ideas ?, is this because the CR content ?, (CIM Model, CR Content and XI Content are a little unclear to me). Is it an idea to do an export and import from my Dev to QA environment ?.
    Thanks in Advance
    Damien !

  • Source files

    I was shown some source files with errors in them... I corrected them with a little help from... Well I forgot her name... But anyone know of any good sites who offer source files with 1 or more errors in them were the object is to debug them? I tink i coould learn something from looking at these files.

    Just watch this forum! U'll see loads of people wanting their code debugged!
    Squiffy

  • Lookout project file loading error

    Hi folks,
    I've got this problem.
    I migrate a project to Lookout 6.1 to Lookout 6.5 opening the .lks file an generating the .l4p file.
    I made lots of modification using the symbolic link objects with the dynamical option to point to communication objects data members (OPC client objects) and to internal object (Data table ojects data members).
    Usually, after lots of modification, I reopen a project using .lks file to recompile it.
    Now rises the problem.
    If I load the  lks file, lookout compile the source file without errors, but when it load the process file it goes in error after a little while and the usual error windows appears. In the event viewer I find this information:
    Event Type:    Error
    Event Source:    Application Error
    Event Category:    None
    Event ID:    1000
    Date:        27/05/2011
    Time:        15.25.40
    User:        N/A
    Computer:    VM-TEST-AB
    Description:
    Faulting application lookout.exe, version 6.5.0.49153, faulting module unknown, version 0.0.0.0, fault address 0x00005f6f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 6c 6f 6f   ure  loo
    0018: 6b 6f 75 74 2e 65 78 65   kout.exe
    0020: 20 36 2e 35 2e 30 2e 34    6.5.0.4
    0028: 39 31 35 33 20 69 6e 20   9153 in 
    0030: 75 6e 6b 6e 6f 77 6e 20   unknown 
    0038: 30 2e 30 2e 30 2e 30 20   0.0.0.0 
    0040: 61 74 20 6f 66 66 73 65   at offse
    0048: 74 20 30 30 30 30 35 66   t 00005f
    0050: 36 66 0d 0a               6f..   
    If I load the process file .l4p, the project are correctly loaded and run.
    I try to compile manually the source project using cbl. After, when I load the .l4p file, the error rises.
    I check the symbolic links and It seems they are correct. I defined data members to point to obviate to point to a non existing object. In this way, the symbolic links always point to existing objects.
    Any ideas?
    Thanks to all
    Mario Fanelli
    Solved!
    Go to Solution.

    Now I rename all the data member names too long into one short. It's a long work. In the projects made under lookout 6.1 I had no problems with recompile and load using the data members names too long. Could be possible that a dynamic symbolic link causes a crash during the loading after the compiling phase? How the dynamic symbolic links are generated when a project starts? I have found a strange mode of operation about the dynamic symbolic links (an example is attached). When you define a symbolic link, you can generate an expression dragging the symbolic link on a panel (in the example is the expression in the high left side of the panel). When you reload the project, go into edit mode operation and try to drag a new expression with the symbolic link, you can't define it. It seems a dongle symbolic link. Only if you rewrite the expression inside the symbolic link, you can drag the new expression. Anyway, the symbolic link works correctly.
    Mario Fanelli
    Attachments:
    ex.zip ‏5 KB

  • "Source file does not conform to XML Schema!" error at Import Server

    Dear SDN,
    When I run Import Server the import job stopped with the error "Source file does not conform to XML Schema!" in Log file. I used MDM SP05 Patch01 and HF1.
    Both of 2 Import Server have same problems. Of course it works in Import Manager.
    What do I have to check?
    Regards,
    Eric

    Hi Eric
    Just confirm this...
    One needs to load XML schema file in MDM and can be done by specifying this file in Port .
    Refer this link.
    http://help.sap.com/saphelp_mdm550/helpdata/en/fa/69b20ae0ae4b158a3f6d025b3d3847/content.htm
    Just make sure that corresponding XSD file is specified in the port
    Regards

  • UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

    UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before.  UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D  On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example 
    cannot read from source file or disk
    7z.dll
    Type application extension
    size 585kb
    date modified 7/14/2009 10.26pm
    other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
    Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-)  Thank you!
    I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
    Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
    I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba.  Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.  
    When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
    Windows failed to start.  A recent hardware / software change might be the case.
    To fix the problem
    Insert your windows installation disc and restart your computer
    Choose your language settings and click ‘next’
    Click ‘repair your computer’
    File: \boot\memtest.exe
    Status: 0xc000000f
    Info: the selected entry could not be loaded because the application is missing or corrupt.
    I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message.  I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy.  On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop.  I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

    Satellite L655-S5096
    Downloads here.
    the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
    My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
    Otherwise, order new discs from Toshiba.
    -Jerry

  • I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

    Why do they even offer a free trial version of livecycle es4,  when its obviously not free??????
    i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
    a messsage pops up saying Error 13:11 Source file not found verify file exsist.  what does that even mean?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for