Valuation type stock

Hi
1) What is difference between batch and valuation type?
2) Can we maintain materail with batch and valution type also?
3) Which table we get valution type of stock?
4) Which table we get batch wise stock?
5) Can we make of material stock report using both valution
type and batch also?
6) In table MBEW table there is total stock. How this total l stock calculated?
7) What is differece between stock which are avialble in MBEW,MCHB and MARD
Please give me detail answer
Thanks and Regards

Dear
Try the following details report which may help you :
1.CKM3 - Material Analysis
2.S_ALR_87013181 - Material Prices and Inventory Values Over Several Periods
3.MLCCSPD - Cost Components for Price
3.CKMLQS - Valuated Multilevel Quantity Structure
4.CKMCCD - Display Actual Cost Component Splits
5.S_ALR_87013182 - Transaction History for Material
Check this and revert
Regards
JH

Similar Messages

  • Valuation Type Stock Transport Order

    Dear All,
    Can a Stock transport order be created without specifying valuation type in it? If YES, then how to configure the same in SAP??
    If NO, then how to ensure that valuation type and batch of a material in receiving plant remains same as in the supplying plant. In our case there are always multiple valuation types/batches for a given material in one plant.
    regards,
    Baljit

    Hello,
    Would you mind to rephrase your question so we can see the relationship between <b>Oracle</b> and the stock transport?
    If you can't, perhaps you could post it in a more suitable forum. Like, perhaps, SAP ERP Financials
    You can find the list of forums here:
    https://www.sdn.sap.com/irj/sdn/forums
    Thanks

  • Valuation type in case of stock transport order

    Hi,
    We are spilt valuation.
    now we are doing stock transport order and it is asking for valuation type. while we dont want to enter valuation type in STO.
    as which material is to sent to plant, we know at that time of delivery.
    but during making STO system is asking for 'enter valuation  type'.
    How we can do the same.
    Regards,
    Santosh

    Hi,
    Since you have activated the split valuation for the material system is asking to enter the valuation type.
    Check the material master Accounting 1 view whether you have maintained valuation category?
    If you want Split valuation, maintain the valuation type in config settings in IMG & extend the material to the respective valuation type.
    Hope it helps.
    Thanks & Regards,

  • Valuation type change to existing stock

    Dear SAP friends,
       Is there any possibility to change Stock of one valuation type to another valuation type.
    For example I want to change Raw material imported  stock to Raw material Indigenous ( Domestic).
    Any answers will be appreciated.
    Ram

    Hi,
    In this case you can use Tr. Code MMAM but provided the below conditions.
    There should not be any stock for both materials(zero stock)
    There should not be any pending PO's, PR's etc, for both materials.
    Then try with Tr. code. MMAM.
    Thanks and Regards,
    Nagaraj

  • Stock of material and moving average price for each valuation type

    Hi
    Is anybody aware of any standard report which will show the stock of material and moving average price of the material for each valuation type.
    M5BL is one report but would like to check if there is any other report.
    Regards
    Vaibhav Mahajan

    Hi,
    Check MB52, select 'Display batch stock' option.
    Batch is nothing but your valuation type.
    You can see those details there.
    Regards,
    Piyush

  • Material with different Valuation types in WM Stock status

    Hi
    If we are maintaining stocks of different valuation types in a Plant , and the Storage Location in the Plant is Warehouse Managed,  then how can we see the stocks in different valuation types in the Warehouse stock?
    thanks
    Raj

    Hi Keerthan,
    It will not be possible to change or add valuation type after the material movement is performed for the material. Only option is to create new materials.
    In case if the materials are not involved in any material movement, then you can change valuation type. Best thing will be executing via LSMW.
    Regards
    Terence

  • Material type non valuated affected stock update?

    Hi expert,
    i created PO by using account assignment "A" and material number with material type non valuated (just qty update). At the same time i processed GR, the result wasn't as like as i expected. The asset value was raised and the qty was updated in the warehouse.
    Surprisingly, this result (qty update in warehouse) is also affected by using account assingment "K" & "F".
    As i know, the business process by using account assignment means consumption and stock mustn't be updated  in warehouse. So how could the material type non valuated's stock can be updated at the time i m doing consumption purchase? is there any config i miss in order to make it doesn't update the stock?
    thanks & Regards,
    AJ

    problem solved

  • Stock with Valuation Type 'N'

    Hi all,
    i have stock in mmbe under storage location "0500", valuation type 'N'
    but when i created a line item in SO with same material and in sales A with valuation type as 'N' as shown below
    instead of confirming on same date, as there is enuf stock for this material as shown in the top, it giving me a confirmation date almost after 3 months. WHY ??
    Please Help
    Regards
    Abhilash

    yes it is same as delivery plant, if we remove valuation type 'N" from Sales tab A, it will confirm on the same day...so i guess it something to do with extra  check for stock with valuation type 'N"...but don,t know where to check this. Help

  • Stock determination with Valuation type in WM

    Hi SAP Gurus,
    We have activated Split Valuation . There are two Valuation type for material FREMD_HALB for extern procument and EIGEN_HALB for in house production. Warehouse Managment is active.
    We have stocks in our WM Storage Location 10 pc For EIGEN_HALB and 10 PC for FREMD_HALB
    If we want to sale 5 pc form this material, we would first consume from FREMD_EIGEN Stock. Stock determination has been set correctly .
    Plant              SDG             STDR
    ZEKU     ZEKU     ZEKU
    Sp                 Plant    Priority indicator  Valuation type
    F     ZEKU     1     FREMD_HALB
    F     ZEKU     2     EIGEN_HALB
    and Stock determination rule has been assigned.
    But  when we create a transport order by delivery It is always suggested by the system EIGEN_HALB Stock.
    I have looked oss note and found OSS Note 365570 - Stock determination in LE-WM Note 365570
    OSS NOTE says as Solution   u201EFor stock determination in Warehouse Management, the system does not take any pipeline stocks or valuation types into account.u201C
    I would like to ask if there is a solution for this?
    Should I use  USER EXIT. If yes, can you give us the user exit name??
    Thanks in Advance.
    Best Regards,
    Emre

    Hi Jürgen,
    Yes , I have tried WM Batch determination but it doesnt work.
    I will try to implement a user exit.
    Thanks a lot!
    Best Regards,
    Emre
    Edited by: Y. Emre Kurnaz on Feb 2, 2010 5:49 PM

  • Valuation wise stock report

    Hi Friends,
    Is there any report where we can see stock report valuation type wise.
    E.g. i created two valuation types Domestic and Import. Also i created two storage location separately for both valuation type. I am able to see report based on storage location but not on basis of valuation type.
    Seeking your guidance how can we withdraw report based on valuation type
    Regards
    Vivek

    Hi,
    Use report MB5L
    Here in selection screen, enter valuation Type and execute the report.
    In output screen,
    Double click on the GL Account, it will show the report having current details of material with stock qty, Base UoM, Stock Value and Valuation Price with Price Control and valuation type.
    Do layout setting as per requirement.

  • Valuation of stock in transit for a given period

    How can I find the valuation type for the stock in transit at a given period?
    I have 6000 units in transit to plant 2222 and I want to find out its valuation. I believe I either need to know the plant of origin and batch or the destination plant and batch, but I do not know how to get this information.
    Thank you

    Hi,
    Check MB5T transaction to find out the total stock in transit.
    In order to find out the same period wise, check MB51 Report using the mov.types 641 & 101. By reconciling the same you can findout which are all pending.
    Thanks & Regards,

  • Error: Batch does not contain a valuation type

    Hi,
    When I'm trying to do MB1B for the below parameters, I'm getting the error:
    Transaction       MB1B
    movement type 411
    special stock     Q
    plant                 XXXX
    storage location YYYY
    WBS element    a12334455674787698
    material             1234
    quantity             n
    batch                12345678
    'Batch 'material no' 'plant' 'batch no' does not contain a valuation type. Message no. M7 045
    But the batch has a valuation type and the material is assigned a valuation type too.
    Can you please giude me to find out why is this behaviour?
    Regards
    Jag

    HI, I've encounter the same problem. But I used the movement type 323 E.
    I input the data as below:
    material  2000000564
    plant  S010
    storage location 2001
    batch 0903011208,
    and got the message M7045 saying that Batch  2000000564 S010 0903011208 does not contain a valuation type,  but the batch 0903011208 do have a valuation type in it!
    When I use movement type 323,  there isnt' any error message returned!
    so, I guess there is a bug in the program!

  • Actuals for stock valuated materials in a valuated project stock

    Hi friends!
    Iu2019m working with materials in the project, and we are going to do direct external procurement from the project. The material we are using are valuated stock and in the project I have valuated project stock.
    The requirements are that the vendor give us the material prices, and the material will not be consumed by the project(WBS/network). All the material will be collected to the special project stock until we decide to move the material to the unrestricted stock to be consumed by another department in the company. All the actual cost must follow-up in the project.
    This is what I do:
    From the project I create material components and I create the PO requisition I got the same price as in the project. Thatu2019s ok.
    When I convert the PO requisition to the PO I got no price but if I save I got the latest used price for the material and this could varied and it´s ok but should not work like this for this scenario.
    My doubts are when I do the goods receipt (MIGO) and the price of the material in the PO are not the same as the stock valuated price I got the difference as actuals in the project and the valuation of the material are in the project stock. If the price of the PO is the same as the valuation price I got no actuals in the project.
    When I register the invoice from the vendor (MIRO) I got no actuals either so I cannot do my project follow-up costs. When I check the cost they are in accounting (balance sheet account).
    When I do the material movement with 411Q to unrestricted stock I donu2019t get any actuals in the project either.
    Is this a normal behavior when using stock valuated materials in a valuated project stock?
    I SAP help I found this information for non valuated project stock:
    u201CAll the actual production costs appear in the project because no price variances can occur and all external procurement follow-up costs are debited to the WBS element.u201D
    But if the best practice is to use valuated project stock why follow-up costs cannot be done in the project?
    Please give me some ideas of this,
    Best regards
    Jose Marin

    If the mateiral was created using the no stock material material type then yes you can see this material in MM60.  Search using material type 'NLAG' for non stock. 
    Regards,

  • Valuation type with batch management.

    Dear all:
    We have created our self valuation category D, without automatic valuation type.
    From what we have checked, it is mandatory to enter a valuation type during batch creation with MSC1N. This link between batch master and valuation type is impossible to change.
    Our plan was to employ 2 valuation types, independently of the batch used, so that with a STO we could be able to post and outbound movement from valuation type A and a subsequent inbound goods receipt of valuation type B.
    That's a problem for us as we use batch numbers to refer to certain material features, and those shouldn't change given the valuation type, so that it is mandatory for us to use the same batch number for both valuation types. Given that the link between batch master and valuation type is unbreakable, this looks not possible.
    We already tried to de-activate the valuation type as a required field during the batch creation, but it didn't work as the field still needed an entry during the saving. There are also several error messages that would need to be de-activated (M7043, 06649...)
    If we cannot use two valuation types with the same batch, is there any solution we can manage, besides of the duplication of batch numbers?
    Any help will be greatly appreciated.
    Thanks in advance.

    Hi, Jürgen, thanks for your comments.
    We have as well the batch management at plant level, but our idea was to use split valuation in order to avoid the use of plant as the minimum valuation level, as this would have further issues regarding the logistic side (we can use the stock determination group to solve this when using split valuation).
    So we face the problem that with a given batch number we cannot post movements with two different valuation types.
    I'll take a look at the note anyway, thanks for your help.

  • Deleated Valuation Type --Need Error Message while creating Purchase Order

    Hi,
    In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
    In current configuration , it's not there.
    Await your expert opinion.
    Regards
    Shyam Kogta

    I investigated this recently in our company and gave this answer:
    A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
    The archiving run then checks if a deletion is possible or not.
    So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
    To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.  
    In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
    Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
    There is one for goods receipts (but only for a certain industry solution that is not used by us)
    There is one for deliveries ( VL 211 ).
    The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type  ABC , while an internal order (production) gets the DEF.  Usually there should not be a need to change this valuation type manually.
    So the only solution is to archive the material master at valuation type level.
    But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
    And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

Maybe you are looking for