Variable within Filter expression will not parse -Seems to be corrupted

ODI 10.3.4.0
I defined a Variable TTE_BU of type "Alphanumeric", Default Value = the select query:in (SELECT BUSINESS_UNIT FROM PS_S1_ODI_LEARNING)
I use this variable as a package variable to filter table source data
When I run the package The package errors out with the message:
911 : 42000 : java.sql.SQLException: ORA-00911: invalid character
java.sql.SQLException: ORA-00911: invalid character
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
If I create another variable with another name but with the same SQL query the package runs OK.
Has anyone ever solved tthis king of error?

Solved the problem by doing a delete in the ODI repository.
DELETE FROM SNP_VAR_DATA WHERE VAR_NAME = 'TTE_BU'
I would be thankful to anyone who can explain the purpose of this table.

Similar Messages

Using Variable within Filter expression will not parse.

IN ODI 11.1.1.3.0, I defined a Variable (SelectionDate) of type "Alphanumeric", Default Value = 01-JAN-1970 with the select query: select to_char( SYSDATE , 'DD-MON-YYYY') from dual.
I intend to use this variable as a scenario variable (parameter) that receives a value in the form of 'DD-MON-YYYY', from the execution environment.
I refreshed the variable and it received the value 16-JUN-2011 (today's date). So far so good.
I then defined an Interface and used the variable in a filter expression:
Active Filter: Checked
Implementation Tab:
SOURCE_VIEW.SELECTION_DATE BETWEEN TO_DATE('#PROJECT1.SelectionDate', 'DD-MON-YYYY') AND (TO_DATE('#PROJECT1.SelectionDate', 'DD-MON-YYYY') + 1)
Execute on :Source
When verifying the expression (click on the checkmark in the implementation tab) I always get: Expression is not valid for this DBMS. java.sql.SQLDataException: ORA-01858: a non-numeric character was found where a numeric was expected.
I cannot get the filter to parse. Thank you for your ideas of what might be wrong.
Jose.

Yes, it worked when placed in the package.
I think the expression editor is sending the string as it is written to the database in order to parse it, without replaceing the #variable for the actual value. Anyway thanks.
Jose

How to use the date repository variable in filter expression

Hi Gurus
I am getting error in using the date repository variable in Filter expression. I am using the below formula
filter( Fact.calls USING "Dim Time"."Fiscal Month End Date" = VALUEOF("month_start") )
I am getting below error
Formula syntax is invalid.
[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22024] A comparison is being carried out between non-compatible types. (HY000)
SQL Issued: SELECT filter( fact.Calls using "Dim Time"."Fiscal Month End Date" =VALUEOF("month_start")) FROM "Call Data"
Then i tryed the below format i am getting still the error
filter( Fact.calls USING "Dim Time"."Fiscal Month End Date" = DATE'(VALUEOF("month_start"))' )
Formula syntax is invalid.
[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46047] Datetime value (VALUEOF("month_start")) from (VALUEOF("month_start")) does not match the specified format. (HY000)
SQL Issued: SELECT filter( Fact.Calls using "Dim Time"."Fiscal Month End Date" =DATE'(VALUEOF("month_start"))') FROM "Call Data"
Please let me know what i am missing or what is the correct syntax for fitler using the date repository variable.
Thanks in advance
Regards
@li

Hi @li,
Syntax-1 is fine it will work,What kind of Variable is it?
Static or Dynamic
Thanks,

Airport Express Will Not Reset or Join WDS Network

I have an Airport Extreme which is a WDS main. The Express will not join the network. I reset the Extreme, set up the network again, and did a hard reset of the Express. Airport Utility will not see the Express either from my iMac or MB Pro regardless of whether I connect directly through Ethernet, or wirelessly. The Express flashes amber. I've read the proposed solutions given to others with the same problems, but nothing works for me.
I know I'm doing something incorrectly, but can't figure out what's going on. Any help would be greatly appreciated.
Thanks

A couple of suggestions:
1. do a factory default reset of the Airport Express. Follow the instructions to the letter, which means don't let go of the reset button until you see the four green flashes in a row. This can take a bit longer than Apple's article suggests - up to 10-15 seconds.
2. when setting up the WDS (and I suggest you do this all wirelessly) make sure the Mac, the Airport Extreme, and the Airport Express are all in the same room. I suggest you use the iMac - MacBook Pros seem to have their own share of wireless network problems.

It will not parse! Creating a new object in the universe

Hi, we have a universe and BO reports. They work fine for our clients. We are on BO XI r3.1. Now, one client captures an additional piece of info. They would like to report against this and add it high up on our drilling heirarchy. "Sure, no problem". For the following I was logged in as administrator.
The additional data field is a 3 character code.
1) We added an additional column to the actual database table.
2) In Universe Designer, I refreshed universe structure and could see the additional column
3) Created an object 'Acode' that refers to db.new_field
4) Exported universe
Maybe worth mentioning that I can see this object and use it in reports fine in Infoview.
Now, I need to create a new object that will be one of 2 strings based on the 3 character code (Acode) i.e. the 'Atype' can be X or Y.
Here's my code and it just will not parse:
CASE
WHEN @Select(AFolder\Acode) = 'CEL'
THEN 'X'
ELSE u2018Yu2019
END
Error I get is:
Parse failed:Eception:DBD ODBC SQL Server driverStatement could not be prepared.State 42000
I'd appreciate any help, believe me I have searched the forums!
Thanks, Eddie

Look at following SAP NOtes.
1373739
1184304
Regards,
Bashir Awan

Illustrator CS4 - frequently generates corrupt EPS files that will not parse

I have used many versions of Illustrator prior to and including the CS lines. I am currently running CS4 and this is the first time I have experienced this issue. Approximately half of my EPS formatted illustrator files will not parse. I use Quark Xpress 7 for my layout (never liked any of the Indesign programs). If I try to generate a PDF with my CS4 generated EPS files placed at least 60% of the time the placed file will corrupt the PDF export resulting in no PDF being generated.
Further to this PDF export issue, if I attempt to parse the same EPS file into Photoshop, Photoshop will give me the error message "Could not complete your request because Photoshop was unable to parse the PostScript" and it will abort the attempt to open the file.
Anyone else having Illustrator EPS file issues?
Background info (if needed) Dual 2.0 Ghz, PowerMac G5, 8 gb RAM, running Tiger 10.4.11
I have attached a sample Illustrator file that will not Parse. It will open in Illustrator but not parse into Photoshop or if placed in Quark will not parse and allow for a PDF to be exported.

Thanks for taking the time to write Steve.
I understand that I can drag and drop between programs. Ultimately, when attempting to parse an EPS in photoshop I am merely doing it to confirm that the EPS is indeed corrupt.
As mentioned previously, I predominately use Quark Xpress for my page layout program and until I installed CS4 I have had zero complications with using EPS files. Now I quite commonly can not export PDFs due to corrupt EPS files.
My question to the public is I am alone in this glitch or do others experience the same issue. My first thoughts are that CS4 has a glitch and I should be expecting an update in the near future. But, if I am the only person suffering from this issue than maybe I should be looking at my own software.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

AirPort Express will not extend Wireless Network

Hello. My airport express will not extend my wireless network. It was green for about the first 4 hours and then I've had a flashing yellow light since that time. I've reset it a bunch of times and even have the AE in the same room as my AP Extreme. I complete the setup and then it continues to flash yellow. Can ayone give me a hand?

In the cases where the AirPort base stations would be interconnected by Ethernet you want to configure then for a roaming network, NOT an extended network. Apple uses the term "extended" when the base stations use wireless connection. Regardless of naming convention the end results is pretty much the same.
The link I provided should provide you with the necessary steps to set this type of network up.
If you need additional help, please start a new post as the solution for you will be different than the OPs. Thx!

Airport Express will not talk to my router

I have 2 airport express stations that are 6.3 and they have always been able to connect to my qwest wireless router no prob. I've recently updated to Leopard and was surprised to see the new airport utility instead of the airport admin and airport setup tools. I like the new utility and interface as it seems less confusing than the old but now I'm having issues.
1. I can get the new utility to recognize my airport express ONLY when I do a hard reset to the airport express.
2. As I've done many times in the past, I go through the following setup protocol to join my current wireless network. I simply want to join my current network so I can talk to my stereo and printer wirelessly.
3. When I finish the setup and hit update, the airport utility updates the express successfully and then attempts to restart the express in order to join my network. This is where the problem lies.
*Here's the error message I get:*
AirPort Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.
Now, I've tried repeating this process 10 times with both airport express stations and the same result happens? Remember, the only way for the utility to find the express is to hard reset the express. What gives? I bought both of these express stations over a year ago and they've been working fine til now. Because they are older and updated to 6.3, I shouldn't update them to the 802.11n7.3.1 update or should I? Is there something different about this new airport utility in Leopard that is causing the problem?
Like I said, I've done this exact same thing many times and its pretty straight forward but I'm stumped.
Anyone? Thanks in advance

I've got the solution! It took me some fair hours, though...
It seems the Airport Express can not handle the WEP-encryption properly, nor the 64 or the 128 bit versions. Here's how to work around it:
1) change your routers encryption to WPA2 with passkey (WPA-2-PSK). You may use the 10-digit code supplied with most routers or any of your own choice.
2) Change all wireless cards in your network to WPA2-PSK. It can take some time to figure it all out, but in the end you'll fix it. I had to download a new driver for my D-Link card DWL-G650 for instance.
3) Do the usual config thing with the Airport Express. Choose to connect to an existing network, apply the 10-digit passkey (be sure to choose the WPA2-PSK-option in the drop down-menu).
4) Off you go! Itunes will find the remote speakers, green lights all over and everybody turns happy...
/W

Counter variable within EL expression

Hello,
I want to set the value of a h:inputText by EL, consider the following example:
<h:inputText id="field1" value="#{handlers.data[1]}"/>The property 'data' is an object array.
Since I have many inputText tags I would like to generate them within a while loop. Thus, the above number '1' must be replaced by a variable (i++).
Does anybody know how to print the value of a variable within an EL expression? <%= i++ %> does not work.

I tried the c:forEach tag, but without success.
Consider the following example:
<c:forEach items="#{handler.myCollection}" var="it" varStatus="idx">
<h:outputLabel for="field #{idx.index}" value="Field1" rendered="#{handler.labels >= #{idx.index}}"/>
<h:inputText id="field #{idx.index}" value="#{handler.anotherCollection[#{idx.index}].fieldname}"/>
</c:forEach>

After Leopard install, all three Airport Expresses will not work...

I have three Airport Express' that worked completely fine before I installed Leopard. After the installation, the Airport Utility will not even detect them. No matter how many times I try to reset them, unplug them, or yell at them, they will not be recognized by the Airport Utility. Currently, all three units are completely useless and just flashing amber. I have tried to look through the topics to see if anyone else has the same issue but, I could not find one that seem to be a duplicate of this problem.
Please help.
-F.

My guess - are you trying to connect to them wirelessly?
If so, the only solution I found was to hook them up with an ethernet cable to the Mac.
Airport then finds them OK and you can upgrade the firmware / software to latest versions.
Hope that helps
Andy

HT3728 Express will not take software upgrade. Message says to install 5.6 and when I do it will not show, says not compatible with this version of Mac. 10.8 OS-X, why not?

Unable to update airport express. When connecting msg says to install 5.6, download and will not take install says it is not compatible.

This is a dilemma. Older Express models require AirPort Utility 5.6.1 or a similar, older version of AU. Mountain Lion will refuse to install it. What to do?
As it turns out AirPort Utility 5.6.1 runs perfectly fine on Mountain Lion. If you had the foresight to have archived it somewhere (such as with Time Machine or equivalent) you can simply copy the app to your computer and use it. The problem is that the installer package will refuse to work on a Mountain Lion system.
If you don't have an already-extracted version of AU 5.6.1 there is a solution: you simply need Pacifist to extract the app from the installer package. I also found another technique described on this page:
http://frank.is/mountain-lion-and-the-old-airport-utility/
Good luck!

Airport Express will not scan iMac.

Hello,
I have 3 devices trying to connect to an AirPort Express. An iMac, MacBook Air and an iPod Touch.
However the iMac will not even scan or recognize the AirPort Express. The other 2 devices are okay.
Can anyone provide any solution, please?
Thank you.

Problem now sorted.
This probelm was caused by the Fiewall on the iMac. I use Macafee anit-virus with firewall. The firewall needed re-setting. However, I am now irritated by consistent drop out in the new 2nd Gen Airport Express! Anyone passing this query that can help?

Final Cut Express Will Not Render.

Hello, while working on a very important project for school, Final Cut Express stopped rendering anything, completely. No matter what project, what circumstance, what method I try, It will not render. I need to get this project done NOW and have no where else to turn to.

Do the Render Items have check marks against them in the Sequence>Render All menu?
Is Capitals Lock switched on?
Al

Airport express will not stay connected

I have a new Airport Express (802.11n) and it will not stay connected to my MacBook Pro. Any suggestions?

I have returned the Express and reinstalled my Extreme. I found a "tip" page that suggested to put a sheet of aluminum foil behind the Express to concetrate the signal inside the house. This crude idea has not solved the problem. My MacPro is a 2 GHz Intel Core i7. Any further suggestions?

Variable within Filter expression will not parse -Seems to be corrupted

Similar Messages

Maybe you are looking for