Variables for E2E Summary View (SSR Workload)

Hi there,
I have installed the Solution Manager Diagnostics and the Diagnostics Agent on the Solution Manager.
If I choose the Solution Manager and open the Workload Analysis there are no informations. When I go to the "Workload Summary" there appears "Variables for E2E Summary View (SSR Workload) ". If I delete "E2E SID Variable" and click on "Execute", I can see the informations. But when I open the tab "Workload Summary" again, I have to delete the E2E SID Variable again. How can I save this change?
Thanks and best regards,
Andreas

Hi Andreas,
I've checked the SAP Note and it's not the solution, because we have implement Support Package 24 for Solution Manager
In the EFWK-Administration I can't see any errors .. Yes it's an alternative to do the setup again, but then I have done it for three times on this system
I always believe that the solution manager should make things easier ...
Thanks and best regards,
Andreas

Similar Messages

  • SMD on SP15: no data for E2E Workload Analysis are shown

    Hello!
    I have successfully run Setup Wizard for the satellite solution "EP Portal on 6.40".
    Unfortunately no data for E2E Workload Analysis are shown since more than one month.
    I use SAP Solution Manager with SP 15, BI CONT 9
    I have implemented the following SAP notes:
    1088163, 1107804, 110782, 1119766
    The jobs E2E_EXTRACTOR_CONTROLLER are running without errors.
    Enclosed one of those for portal solution:
    09.04.2008 E2E: Extractor Controller 1
    EC: 09.04.2008 13:05:52 UTC Extractor Controller started for SID B11
    EC: 09.04.2008 15:05:52 CET Installation Number 0020198811
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_JAVA_EXTRACTOR_IF
    EC: Extractorclass
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component
    EC: 13:05:52 UTC Calling ME.
    EC: Read Destination SOLMANDIAG
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:05:52 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
    Extractor Class:
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    ME: 13:05:52 UTC Receiving return code 0 from
    E2E_JAVA_EXTRACTOR_IF
    ME: No Data returned by Extractor with no Error detected.
    ME: 13:05:54 UTC E2E_ME_RFC Main Extractor Run finished.
    ME: Number of records written to persistence: 0
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor /SDF/APPLOG_EXTRACTOR
    EC: Extractorclass
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200005507
    EC: 13:05:54 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
    RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
    RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
    ME: 13:05:54 UTC Calling Extractor /SDF/APPLOG_EXTRACTOR ,
    Extractor Class:
    ME: 13:05:54 UTC Receiving return code 98 from
    /SDF/APPLOG_EXTRACTOR
    ME: Error:
    ME: Error - No RFC Destination maintained for remote execution.
    EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor /SDF/DUMP_EXTRACTOR
    EC: Extractorclass
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200005507
    EC: 13:05:54 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
    RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
    RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
    09.04.2008 E2E: Extractor Controller 2
    ME: 13:05:54 UTC Calling Extractor /SDF/DUMP_EXTRACTOR ,
    Extractor Class:
    ME: 13:05:54 UTC Receiving return code 98 from
    /SDF/DUMP_EXTRACTOR
    ME: Error:
    ME: Error - No RFC Destination maintained for remote execution.
    EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor /SDF/SYSLOG_EXTRACTOR
    EC: Extractorclass
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200005507
    EC: 13:05:54 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
    RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
    RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
    ME: 13:05:54 UTC Calling Extractor /SDF/SYSLOG_EXTRACTOR ,
    Extractor Class:
    ME: 13:05:54 UTC Receiving return code 98 from
    /SDF/SYSLOG_EXTRACTOR
    ME: Error:
    ME: Error - No RFC Destination maintained for remote execution.
    EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor /SDF/UPDATE_EXTRACTOR
    EC: Extractorclass
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200005507
    EC: 13:05:54 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
    RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
    RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
    ME: 13:05:54 UTC Calling Extractor /SDF/UPDATE_EXTRACTOR ,
    Extractor Class:
    ME: 13:05:54 UTC Receiving return code 98 from
    /SDF/UPDATE_EXTRACTOR
    ME: Error:
    ME: Error - No RFC Destination maintained for remote execution.
    EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_JAVA_EXTRACTOR_IF
    EC: Extractorclass
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200005507
    EC: 13:05:54 UTC Calling ME.
    EC: Read Destination SOLMANDIAG
    ME: E2E_ME_RFC Main Extractor Run started.
    09.04.2008 E2E: Extractor Controller 3
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:05:54 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
    Extractor Class:
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    ME: 13:05:55 UTC Receiving return code 0 from
    E2E_JAVA_EXTRACTOR_IF
    ME: No Data returned by Extractor with no Error detected.
    ME: 13:05:55 UTC E2E_ME_RFC Main Extractor Run finished.
    ME: Number of records written to persistence: 0
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_JAVA_EXTRACTOR_IF
    EC: Extractorclass
    com.sap.sup.admin.bwextract.E2eEAExtractor
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200006685
    EC: 13:05:56 UTC Calling ME.
    EC: Read Destination SOLMANDIAG
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
    RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
    RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
    ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
    Extractor Class:
    com.sap.sup.admin.bwextract.E2eEAExtractor
    ME: 13:05:56 UTC Receiving return code 6 from
    E2E_JAVA_EXTRACTOR_IF
    ME: Error:
    DATA_RETRIEVAL_EXCEPTION
    EC: 13:05:56 UTC Main Extractor raises exception. No Data returned by extractor.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_JAVA_EXTRACTOR_IF
    EC: Extractorclass
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200006685
    EC: 13:05:56 UTC Calling ME.
    EC: Read Destination SOLMANDIAG
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
    Extractor Class:
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    ME: 13:05:57 UTC Receiving return code 0 from
    E2E_JAVA_EXTRACTOR_IF
    ME: No Data returned by Extractor with no Error detected.
    ME: 13:05:57 UTC E2E_ME_RFC Main Extractor Run finished.
    ME: Number of records written to persistence: 0
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR
    09.04.2008 E2E: Extractor Controller 4
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 1
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: 13:05:58 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 08.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type b) detected: From 08.04.2008 12 h to 09.04.2008 11 h
    RR: Interval (Type c) detected: From 08.04.2008 12 h to 09.04.2008 12 h
    ME: 13:05:58 UTC Calling Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR ,
    Extractor Class:
    ME: 13:05:58 UTC Receiving return code 98 from
    /SDF/IDOC_THROUGHPUT_EXTRACTOR
    ME: Error:
    ME: Error - No RFC Destination maintained for remote execution.
    EC: 13:05:58 UTC Main Extractor raises exception. No Data returned by extractor.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_CA_CS_EXTRACTOR
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 1
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: No action - TSL parameter detected.
    EC: This extractor is not allowed to run outside time frame:
    EC: From 03 h to 05 h CET
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F60_XI_E2E_PROXY_STATS
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 1
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: 13:05:58 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:05:58 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
    ME: No Data Found.
    ME: 13:06:00 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F90_CA_C_TRANSPORTS
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 1
    EC: Main Instance (2) 01200314690800000134
    EC: Component 01200615320200005507
    EC: 13:06:01 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:01 UTC Calling Extractor F90_CA_C_TRANSPORTS
    09.04.2008 E2E: Extractor Controller 5
    ME: No Data Found.
    ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F90_CA_NOTES
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 1
    EC: Main Instance (2) 01200314690800000134
    EC: Component 01200615320200005507
    EC: 13:06:01 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:01 UTC Calling Extractor F90_CA_NOTES
    ME: No Data Found.
    ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F90_CA_W_TRANSPORTS
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 1
    EC: Main Instance (2) 01200314690800000134
    EC: Component 01200615320200005507
    EC: 13:06:01 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:01 UTC Calling Extractor F90_CA_W_TRANSPORTS
    ME: No Data Found.
    ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_CA_CS_EXTRACTOR
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: No action - TSL parameter detected.
    EC: This extractor is not allowed to run outside time frame:
    EC: From 03 h to 05 h CET
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_JAVA_EXTRACTOR_IF
    EC: Extractorclass
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: 13:06:01 UTC Calling ME.
    EC: Read Destination SOLMANDIAG
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:01 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
    09.04.2008 E2E: Extractor Controller 6
    Extractor Class:
    com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
    ME: 13:06:02 UTC Receiving return code 0 from
    E2E_JAVA_EXTRACTOR_IF
    ME: No Data returned by Extractor with no Error detected.
    ME: 13:06:02 UTC E2E_ME_RFC Main Extractor Run finished.
    ME: Number of records written to persistence: 0
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F55_XI_IDOC_ADAPTER
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: 13:06:02 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:02 UTC Calling Extractor F55_XI_IDOC_ADAPTER
    ME: No Data Found.
    ME: 13:06:02 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F60_XI_E2E_PROXY_STATS
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component
    EC: 13:06:03 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:03 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
    ME: No Data Found.
    ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Invalidating MDX Cache.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F90_CA_C_TRANSPORTS
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component 01200615320200005507
    EC: 13:06:03 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:03 UTC Calling Extractor F90_CA_C_TRANSPORTS
    ME: No Data Found.
    ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Main Extractor E2E_ME_ST_API
    09.04.2008 E2E: Extractor Controller 7
    EC: Extractor F90_CA_NOTES
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component 01200615320200005507
    EC: 13:06:03 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:03 UTC Calling Extractor F90_CA_NOTES
    ME: No Data Found.
    ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Main Extractor E2E_ME_ST_API
    EC: Extractor F90_CA_W_TRANSPORTS
    EC: Extractorclass
    EC: Product 01200314690900000192
    EC: Main Instance (1) 9
    EC: Main Instance (2) 01200314690800000134
    EC: Component 01200615320200005507
    EC: 13:06:03 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_ST_API Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:03 UTC Calling Extractor F90_CA_W_TRANSPORTS
    ME: No Data Found.
    ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
    EC: Main Extractor E2E_ME_RFC
    EC: Extractor E2E_SSR_EXTRACTOR_IF
    EC: Extractorclass
    EC: Product
    EC: Main Instance (1)
    EC: Main Instance (2)
    EC: Component 01200615320200005507
    EC: Local Execution of Extractor.
    EC: ME called in Multi-Mode.
    EC: 13:06:03 UTC Calling ME.
    EC: Read Destination
    ME: E2E_ME_RFC Main Extractor Run started.
    RR: Calculating Required Records.
    RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
    RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
    ME: 13:06:03 UTC Calling Extractor E2E_SSR_EXTRACTOR_IF ,
    Extractor Class:
    E2E_SSR_EXTRACTOR_0CCMSATPH
    ME: 13:06:06 UTC Receiving return code 0 from
    E2E_SSR_EXTRACTOR_IF
    ME: No Data returned by Extractor with no Error detected.
    ME: 13:06:06 UTC E2E_ME_RFC Main Extractor Run finished.
    ME: Number of records written to persistence: 0
    EC: Invalidating MDX Cache.
    Any helpful information will be appreciated
    regards
    Thom

    Same problem being observed in our Solman system (SP15). Below are the errors observed in the spool output of E2E framework jobs,
    1] ME: Data Loader Error occurred.
       EC: 21:05:44 UTC Main Extractor raises exception. No Data returned by extractor.
    2] No action - TSL parameter detected.
       This extractor is not allowed to run outside time frame
    3] ME: 21:05:45 UTC Receiving return code    98   from
       /SDF/UPDATE_EXTRACTOR
       ME: Error:
       ME: Error - No RFC Destination maintained for remote execution.
       EC: 21:05:45 UTC Main Extractor raises exception. No Data returned by extractor.
    4] ME: Error:
       DATA_RETRIEVAL_EXCEPTION
       EC: 21:05:46 UTC Main Extractor raises exception. No Data returned by extractor.
    Tried referring E2E workload analysis guide...no use..the issues have not been covered in that.

  • SMD on SP15: no data for E2E Workload Analysis is visible

    Hello,
    I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 4) and would set up the SMD functionality for SAP EP 6.40 SP19.
    The Set up Wizards runs without any errors but I could see the data in  the tabs (E2E Workload, E2E Change Analysis)
    The E2E_EXTRACTOR_CONTROLLER job runs without errors.
    Which actions should be done to solve the problem?
    Thank you!
    regards
    Thom

    Tom,
    Make sure that when you ran SMD setup wizard, job CCMSBISETUP completed successfully. Check this in SM37.
    Check ABAP runtime errors in ST22.
    If you are getting RAISE_EXCEPTION error, apply note 1119766.
    Make sure that MultiProvider 0SMD_MPIH is activated. In BI client run  transaction RSA1, Modeling, InfoProvider- check if 0SMD_MPIH is active.
    If above doesn’t solve the issue, try to do Manual activation of BI Content for E2E Diagnostics.  (note 1110013)
    Hope this helps.
    Thanks,
    Labinot

  • Bind variable for view accessor

    I am using a Gantt chart where I need to pass in a date field for the schedule as a bind variable.
    Since this is a Gantt chart, there is no iterator binding for the child VO (the tasks) in my page definition.
        <gantt IterBinding="ParentVO1Iterator" id="ParentsVO1" xmlns="http://xmlns.oracle.com/adfm/dvt">
          <ganttDataMap>
            <nodeDefinition DefName="com.pat.model.view.ParentsVO" type="Resources">
              <AttrNames>
                <Item Value="ParentId" type="resourceId"/>
              </AttrNames>
              <Accessors>
                <Item Value="MainGantt" type="tasks"/>
              </Accessors>
            </nodeDefinition>
            <nodeDefinition type="Tasks" DefName="com.pat.model.view.MainGantt">
              <AttrNames>
                <Item Value="PatId" type="taskId"/>
                <Item Value="StartTimeDate" type="startTime"/>
                <Item Value="EndTimeDate" type="endTime"/>
                <Item Value="Patname" type="label"/>
              </AttrNames>
            </nodeDefinition>
    I have tried retrieving the accessor through the parent VO, and setting the bind variable.
    But I get an error if I fire executeQuery() on the child VO that says that the bind variable for the view link is missing.
            DCIteratorBinding iter = dcBindings.findIteratorBinding("ParentVO1Iterator"); // get parent iterator binding
            ViewObject vo = iter.getViewObject();
            MainGanttImpl childVO = (MainGanttImpl)vo.findAttributeDef("MainGantt").getAccessorVO(vo); //get the child VO through the accessor link
            childVO.setpViewDate(new Timestamp(((Date)getGanttDate().getValue()).getTime())); // get the date entered by the user and set to the child VO
            childVO.executeQuery(); //execute the child VO
    Exposing the child VO impl through the Application module and setting the bind variable to that instance alone has no impact on the Gantt data returned.

    We researched a bit more and hit upon the solution here.
    Decompiling ADF Binaries: Search by child attributes on a tree table
    I added the same bind variable to my parent VO (and added some SQL 'and : pViewDate = : pViewDate' to the query to just get it to work )
    In the parent VO Impl class, I overrode the createViewLinkAccessorRS method:
       protected ViewRowSetImpl createViewLinkAccessorRS(AssociationDefImpl assocDef,
                                                          ViewObjectImpl accessorVO,
                                                          Row masterRow,
                                                          Object[] values) {
                ViewRowSetImpl v =
                super.createViewLinkAccessorRS(assocDef, accessorVO, masterRow,
                                               values);
          //  Timestamp viewDate = (Timestamp )accessorVO.getNamedWhereClauseParam("pViewDate");
            v.setNamedWhereClauseParam("pViewDate", getpViewDate());
            return v;                                                    
      public Timestamp getpViewDate() {
            return (Timestamp) getNamedWhereClauseParam("pViewDate");
    This sets the child VO with the value of the bind variable that I have set to my parent VO. This got the Gantt working!

  • PowerShell to set Summary View for ListViewWebPart

    Hi,
    I'm adding a ListViewWebPart to my page using PowerShell and all working well. The only thing I'm having trouble with is trying to change the view of the ListViewWebPart as part of my PowerShell script. It's for a Links List.
    I've tried a few approaches but can't seem to set the ListViewWebPart view to Summary View.
    Any ideas?
    Thanks,
    Grant. 

    Hello,
    Just try this suggestion and see the result. However this solution did not work for original requester so please verify.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/d519bce0-175d-40fa-8022-6c237b4030ab/powershell-script-to-addmodify-listviewwebpart-summary-view?forum=sharepointgeneralprevious
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Get bind variables of a dynamic view object

    I seem unable to retrieve the bind variables for a dynamically created view object, even though I can do the same thing for a regular view object.
    Here is the code:
    newVO = repServ.createViewObjectFromQueryStmt("newQry",strSql);
    VariableValueManager vvm = newVO.ensureVariableManager();
    if (vvm != null)
    Variable vars[] = vvm.getVariables();
    vars will be empty, even though the sql statement in strSql has bind variables in it.
    Is there any way to determine the bind variables of a dynamic view object?
    Thanks!

    I got the same problem as yours and still could not find any way out.
    However, as I can see, you wanted to get VariableValueManager of newly created ViewObject that may be not available at this moment.
    If you find way to solve the problem, please help.
    Cheer,
    MinhTran

  • Is it possible to customize audit summary view - CRM 2011

    Hi,
    Is it possible to modify or customize the default "Audit summary view" of Auditing in crm 2011?
    Apart from enabling or disabling filters, i don't see any options to modify the view so that i can add more columns or remove few columns from the default view?
    Please do share your valuable inputs.
    Thanks.

    Hi,
    Existing audit logs can be viewed by navigating to Settings -> Auditing -> Audit Summary View. The
    resulting view is fixed by the system with predetermined columns that display the date and time of the event, the type of event, who made the change, the record effected by the event, the corresponding entity type and the operation performed.
    This data cannot be exported to Excel like the standard grids. To assist in finding relevant data, filters can be enabled for all the columns except the effected record column; this works similarly to the corresponding functionality in Excel. Selecting an
    individual audit record will provide additional details for the given transaction.
    So we can't change this system view.

  • Variable for 0FISCPER displays od values

    Hi
    I have created a query containing a interval variable for 0FISCPER. The Query is based on a multiprovider that is build on a single ODS containing WBS line items loaded through 0CO_OM_WBS_6. When the query is run and the variable box appears I press the selection button for 0FISCPER. It displays som od values for selection that does not exist in the ODS. fx. 001.0010. When i select such a value it is converted to 001.2010. The ODS only contain data for 2003-2006.
    Can you help me to understand what causes this, so i am able to fix it.
    Chris

    1.     On the Administrator Workbench: Modeling screen:
    a.     Choose Source Systems.
    b.     In the right hand window select the source system from which you would like to transfer the global settings.
    c.     From the context menu choose Transfer global settings.
    2.     On the Transfer global settings: Selection view in the frame Transfer global table contents select the checkboxes for the settings you want to use from your R/3 source system:
         Fiscal year variants to transfer fiscal year variants
    3.     In the frame Mode choose Update Tables.
    4.     Choose Execute.
    5.     Choose Back twice.
    Then try your reporting......

  • How to use the dynamical or static variable for ESSBASE cube name?

    Hi Experts,
    When I import ESSBASE Cube into physical layer, the cube name from ESSBASE is created automatically, such as H_Sales.
    I want to use the the static or dynamical variable for replacing the external name. So I try to create the static variable in RPD,such as cubeName, and use the following code
    'VALUEOF(cubeName)' into the textbox of external name.
    However, when I view the report in answer, it will generate the error message: Database VALUEOF(cubeName) does not exist.
    Is it possible to implement this functionality?
    Thanks..

    Hi,
    use <%=odiRef.getSchemaName("D")%>
    D as parameter if it is the Data Schema or W if you need the schema from Work Schema
    Your command will be like:
    select <%=odiRef.getSchemaName("D")%>.GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL
    Works?
    Cezar Santos
    http://odiexperts.com

  • Problem occured when create a tree table for master-detail view objects using SQL queries?

    I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
    1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
    SELECT  cntr_list.SOURCE_BLOCK,                   
            sum(                   
             case when cntr_list.cntr_size_q = '20'                   
                  then cntr_list.cntr_qty                   
                  else 0 end ) as cntr20 ,                   
            sum(                   
             case when cntr_list.cntr_size_q = '40'                   
                  then cntr_list.cntr_qty                   
                  else 0 end ) as cntr40 ,                   
             sum(                   
             case when cntr_list.cntr_size_q = '45'                   
                  then cntr_list.cntr_qty                   
                  else 0 end ) as cntr45                    
    FROM (       
        SELECT yb1.BLOCK_M as SOURCE_BLOCK,       
               scn.CNTR_SIZE_Q,        
               count(scn.CNTR_SIZE_Q) AS cntr_qty        
        FROM  SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2       
        WHERE       
        scm.cmr_n = scn.cmr_n             
        AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')                 
        OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))                 
        AND scm.shift_mode_c = :ShiftModeCode                           
        AND scm.end_terminal_c = :TerminalCode      
        AND scm.start_terminal_c = yb1.terminal_c                  
        AND scm.start_block_n = yb1.block_n                  
        AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n                  
        AND scm.end_terminal_c = yb2.terminal_c                  
        AND scm.end_block_n = yb2.block_n                  
        AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n           
        AND scn.status_c not in (1, 11)             
        AND scn.shift_type_c = 'V'             
        AND scn.source_c = 'S'       
        GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q       
    ) cntr_list       
    GROUP BY cntr_list.SOURCE_BLOCK
    2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
    SELECT  cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,                
            sum(                     
             case when cntr_list.cntr_size_q = '20'                     
                  then cntr_list.cntr_qty                     
                  else 0 end ) as cntr20 ,                     
            sum(                     
             case when cntr_list.cntr_size_q = '40'                     
                  then cntr_list.cntr_qty                     
                  else 0 end ) as cntr40 ,                     
             sum(                     
             case when cntr_list.cntr_size_q = '45'                     
                  then cntr_list.cntr_qty                     
                  else 0 end ) as cntr45                      
    FROM (         
        SELECT yb1.BLOCK_M as SOURCE_BLOCK,     
               yb2.BLOCK_M as END_BLOCK,  
               scn.CNTR_SIZE_Q,          
               count(scn.CNTR_SIZE_Q) AS cntr_qty          
        FROM  SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2         
        WHERE         
        scm.cmr_n = scn.cmr_n               
        AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')                   
        OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))                   
        AND scm.shift_mode_c = :ShiftModeCode                             
        AND scm.end_terminal_c = :TerminalCode        
        AND scm.start_terminal_c = yb1.terminal_c                    
        AND scm.start_block_n = yb1.block_n                    
        AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n                    
        AND scm.end_terminal_c = yb2.terminal_c                    
        AND scm.end_block_n = yb2.block_n                    
        AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n             
        AND scn.status_c not in (1, 11)               
        AND scn.shift_type_c = 'V'               
        AND scn.source_c = 'S'         
        GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q         
    ) cntr_list         
    GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
    3. I create a view link to create master-detail relationship for these 2 view objects.
    masterview.SourceBlock (1)->detailview.SourceBlock (*).
    4. I create a tree table using these 2 view objects with master-detail relationship.
    When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
    But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
    I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
    Managed Bean:
            DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
            ViewObject vo = dc.getViewObject();
            System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
            System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
            vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo.executeQuery();
            System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
            DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
            ViewObject vo1 = dc1.getViewObject();
            System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
            System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
            vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo1.executeQuery();
            System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
    5.  What's wrong in my implementation?  I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.

    Hi Frank,
    Thank you and it can work.
    public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
                                                                              Number highSalary) {
            Row r = getCurrentRow();
            if (r != null) {
                RowSet rs = (RowSet)r.getAttribute("EmpView");
                if (rs != null) {
                    ViewObject accessorVO = rs.getViewObject();
                    accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
                    accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
                executeQuery();
    but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and  I have to change current row manually like below.
    any idea?
                DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
                ViewObject vo = dc.getViewObject();           
                vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
                vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
                vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
                vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
                vo.executeQuery();
                vo.setCurrentRowAtRangeIndex(0);
                ((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues();

  • Create subscriptions for Powerview reports like SSRS reports in SharePoint 2010

    Hi,
    I have created the power view reports in SharePoint 2010 and now I want to create an email subscription for Powerview reports like SSRS reports in SharePoint 2010. Is it possible? If not, is there any workaround?
    Thanks,
    Suresh.

    Hi Suresh: 
    Unfortunately, you can't setup subscriptions in PowerView like you can on SSRS. I would suggest you to open up a connect item here and request for this feature - http://connect.microsoft.com/SQLServer
    Hope this helps.
    Faisal Muhammed My Blog

  • How to pass pageFlowScope variable value as bind variable for VO

    Hi,
    I have one fixed lov (not based on datasource), if i select any value in that lov i want to pass this value to a pageFlowScope variable.
    After this i want to use this value as bind variable for VO. whenever the vo executes thereafter this bind variable should filter that vo results.
    My jdev version: 11.1.0.0
    Thanks in advance,
    SAN

    san-717,
    can you elaborate on the use case instead of the implementation you don't get done? I understand you have data displayed in a tree: so lets assume the tree structure is Locations, Departments and Employees according to the Oracle HR sample schema.
    1. What is the LOV supposed to do ?
    2. Where is the LOV located ?
    3. What values does the LOV show ?
    4. Is the LOV a select choice component or a real LOV (with search dialog)
    5. Where is the bind variable used ?
    To me it sounds like you want to filter the tree data based on the select choice value. However, you wont do this by passing the bind parameter to all View Objects involved as they may not have the attribute in their query. So your use case is important to answer the question
    Frank

  • Text Variable for a Restricted Key Figure

    Hi,
    I have a version comparison query three Restricted Key figures based on 0QUANTITY each of which are restricted by Version, Value Type and Fiscal Year. All three are in my query columns. The users select 3 sets of version, value type and fiscal year in the selection for comparison.
    They want to see the text of the version they have selected as the description of the column. How can i achieve this with text variables on these 3 Restricted Key Figures which have multiple restrictions. Please advise
    Thanks
    Rashmi.

    Hi Rashimi,
    As u said this can be acheived by text Variable,
    I have adoubt here,are  there THREE columns for Quantity or just ONE column with three Restrictions.
    In case it is three Columns then u can go with Text variables else probably u may have to populate it in three Columns and by using Workbook you can combine them in one Column.....i.e One column with all the restrictions -text.
    And here is how u create a  text variable.....
    Create text Variables,For Example ,say 0FISCALYEAR.
    1)Right Click on the 0FISCALYEAR and Create a input Variable say YFISCYEAR and save.
    2)If ur using 0FISCALYEAR in the RKF,then drag both the 0FISCALYEAR and KF say 0QUANTITY in the new selection.
    3)After the Description of the RKF there is a = sign click on that to VIEW and CREATE Text variable.
    4)Create New Variable ,enter the tech name(say YFYEAR) and dscription and in the same screen choose type Replacement PAth after which u will get a set of infobjects.
    5)choose 0FISCALYEAR
    6)In the Next screen choose the Tech name of the Input variabble(0FISCALYEAR) and save.
    7)In the description of the RKF ,type as 0FISCALYEAR &YFYEAR&.
    Check this too .....
    /people/surendrakumarreddy.koduru/blog/2009/02/26/using-text-variables-with-customer-exits-in-report-headings
    rgds
    SVU123

  • SharePoint 2013 Blog - Modify Summary View

    I am using SharePoint 2013.  I need to modify the blog posts to show extra fields and exclude others.  When I initially tried to edit the "Current View" for the web part, I got an error. I switched the view to "All Posts", then
    switched back to "Summary View" and the error went away. Now with I try to edit the Summary View, I just get a blank page with no fields to select.
    Is there any other way to modify the "Summary View" for the blog posts web part for 2013?

    You can customize the summary webpart using the SharePoint designer.
    check this blog post:
    http://dishasharepointworld.blogspot.com/2012/03/customize-homepage-of-sharepoint-blog.html
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Ready for Input Variables for Multiple Queries in I_T_VAR_RANGE

    Hi
    I created Web template which contains multiple views/queries. Two views/queries contain Ready for Input Variables. I have custeomer exit code for this Web template. I wrote code by using Ready for input variable which pass to customer exit code. But the variables which contain in two views/queries not appearing in I_T_VAR_RANGE. The two variables belongs to different views and I required those variables. please find below code:
        WHEN 'ZVBCUST'.
          LOOP AT i_t_var_range INTO w_var_range WHERE vnam = 'ZVAR1'. 
            g_soldto = w_var_range-low.
          ENDLOOP.
          LOOP AT i_t_var_range INTO w_var_range WHERE vnam = 'ZVAR2'
            g_zvbsshto = w_var_range-vnam.
            g_shipto = w_var_range-low.
          ENDLOOP.
    The above 'ZVAR1' is ready for input variable which belongs to one Query and below 'ZVAR2' is other ready for input variable which belongs to second query. I required these two at a time when customer exit variable 'ZVBCUST' executes.
    But in I_T_VAR_RANGE only one variable appears when I execute Web Template . Kindly help me in this regard
    Thanks
    luci

    Hi,
    First thing is to how you have defined your variable such as
    Customer exit or
    Replacement path or
    Manual input etc..
    If you want your variable filled through the exit select Customer Exit, then you have to look at the variable options such as Single value or range. According to your definition you have code as you defined such as wa_range-opt = 'BT' or 'EQ'.
    Next..
    In CMOD -> your project -> EXIT_SAPLRRS0_001 -> include 'ZXRSRU01' ->
    ISTEP = 1 -> before the variable pop up will be filled by the exit
    when 'your variable'
    your code
    ISTEP = 2 -> after the variable pop up i.e after running your selections, calculates the values for your variables after selection screen execution.
    when 'your varaible'
    your code
    ISTEP = 3 -> Validation purpose and message handling purpose
    when 'your variable'
    your code

Maybe you are looking for

  • Does anyone know how to remove an unfinished movie download from an ipod touch

    I need some help with my ipod touch 4 I download the movie but it showed that i dont have enough space and it wont let me to remove or delete the movie. I tried everything but no luck. I dont want to see unfinished movie download stuck in my download

  • How to turn off the wi-fi led (f12)?

    my Pavilion dv6-6c60el has F12 wi-fi led always lit.  Can't switch off hitting f12, Control F12,FN F12, every combination. Note that wifi connection is disabled because i'm connected via lan. thanks, Tommaso

  • IChat webcam effects question!!!

    hey everyone i downloaded the extra effects that ichat has i see that you can add your own pictures as a custom background on one of the effects pages i was wondering... is there anyway to add your own cut outs of pictures to add inFRONT of you? (lik

  • Apple Mobile Device Not Running

    Any suggestions? I just bought my ipod touch yesterday and upgraded my itunes to the newest version but it still won't sync. I've gone through the help pages on here, clicked through the control panel to services and the Apple Mobile Device isn't eve

  • Questioned Devices in LMS - DFM

    Hi, We are running LMS 3.2 (windows) and I have a group of switches I am trying to monitior in DFM. I have discovered the devices in device management successfully. Then I import the devices into DFM they always go into a questioned state. Several at