VAT registration no. not posting through FM IDOC_INPUT_INVOIC_FI.

FM IDOC_INPUT_INVOIC_FI is used to post the invoice in IDOC with basic type as INVOIC01. Document is saving in BSEG table; however VAT registration number is not populating this BSEG- STCEG.
Please help me to solve this issue?
Regards,
Prajwala K.

hi
In Segment E1EDK01 there is a field EIGENUINR which holds the VaT number.
Regards
Prajwala K.

Similar Messages

Document not posting through F-02 BDC in background.

Hi,
While trying to post park documents for a company code through F-02 using BDC in background mode N, when any single document is having any error then all the documents for that company code are going in error state and not getting posted.When checked in debug mode for the error document, it is showing the Profit center field is not present on screen at BDC whereas the profit center field is actually passed and is present.Please advise.
Edited by: rohan.das on Dec 20, 2011 2:40 PM

There is a POP-Up window in the process, that is not coming in background. identify that screen no and not pass any data, another option is pass OK_CODE for that particular screen.
Hope it's might be useful for you.
Thanks,
Prarthan

Copying vendor's VAT registration number into FI Document

How do I get the vendor's VAT registration number from the vendor's master record to copy into the FI Document when posting a vendor invoice via tcode F-43.
Now, BSEG-STCEG is always blank now on all our vendor invoices. Also, the branch account, BSEG-FILKD, is blank. All vendor invoices are manual journals via F-43.
I think I need to configure SAP so that the user must also enter the Branch Account when posting to a vendor in tcode F-43. Then, I think that SAP standard will lookup the Branch Account Vendor to copy in the VAT registration number into BSEG-STCEG.
I see that my customer invoices posted via SD are correctly being populated with the Branch Account of the Sold-To customer.
I further see that SAP standard code in MF05AI10_STCEG_PRUEFEN appears to only update BSEG-STCEG via the Branch Account (BSEG-FILKD) and not via the vendor (BSEG-LIFNR).

Hi All,
I'm facing the same problem, kindly let me know how do I get the Vendor's VAT registration number while posting invoice. As every time when I'm trying to post vendor invoice the system ask for the customer number and the Reporting country and pick up the VAT reg. no. from the customer master base and not from the vendor master base.

Biller Direct sporadically not posting Credit Card Payments to the backend

Hope someone has experience this issue before. While we are part of the Public Sector - Higher Ed group, I believe others may have experience this issue. I have spoken with the other Higher Ed customers and we have all experienced this, some more than others. We have students who are trying to pay by Credit Card on Biller Direct. While their payment is validated and their Credit Card debited the payment does not feed to the ERP FICA system. This can happen to one student and a second later another student can pay successfully then the student in error tries again and it does not work. Some of these student have a lock that has been released. We can post the payment successfully using Cash Desk at the same time the student can not post through Biller Direct. Any help is appreciated.

Hi,
Have a look to below blog, it is regarding e-payment, but you can refer this for your approach.
/people/aashish.sinha/blog/2011/02/24/e-payment-a-customized-solution-other-than-sap-integration-package-swift-150-part-1
Regards
Aashish Sinha

Field Profit Center is not populated while posting through T-Code F-02

Dear Sir / Madam,
While posting through T-code F-02 the field Profit center is in hidden mode
as a result I am getting the given below error.
"GLT2201 - Balancing field profit center in line item 001 not filled"
Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
I tried searching the same but could not find the solution.
Regards
Chirag Shah

Dear expert
Check following steps...
1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
2. Make sure Cost Center exists in the Asset Master..
3. Make sure profit center is entered into Cost Center master.
4.Check the steps where you assign the GL accounts to the splitting rules.
suggest you to go through the below mentioned links
Balancing Field "Profit Center" in line item 001 not filled
Balancing field "profit center" in line item 001 not filled
GLT2201 - Balancing field profit center in line item 001 not filled
Balancing field "Profit Center" in line item 001 not filled
F-51: Balancing field "Profit Center" in line item 001 not filled
Balancinf field profit center in line item 001 not filled
Regards,
Ajeesh.s

Recepient type not updating in entries posted through F-54

We have a scenario as follows
1. First we have made advance payment to vendor through F-48 with TDS posting.
2. We received 4 bills against these advance payment and we booked these bills with TDS posting.
3. We have used F-54 T-Code to nullify the TDS effect in FB60 and to process open item of FB60 against the advance payment through F-48.
Now it working fine while open item clearance ( there is 1Re.diff which we are rounding up).
But while making TDS payment through J1INCHLN two of the entries posted through F-54 ( KA Documents ) are not getting picked up as a result there is differenc between total TDS payable & what is shown in J1INCHLN open items.
On checking in WITH_ITEM table it is found that Receipent type is not updating for these particular entries.
Additional observation : we have three tds codes for basic, surcharge & E cess and three seperate line items are generated for each while posting TDS. It is observed that for these particular invoices as the amount is in hundreds the E cess amt is less than Re.1 so the only two line items are created i.e. Basic & Surchage.
Please guide us for solving this.
Thanks & Regars,
Chandrakant

Hi,
You have to check two tables :
T059C for Receipient types for country IN whether all the WH Types are maintained for CO and OT.
V_T001RWT - WHT Rounding Rules - normally it will be 100 for INR (min Re.1) you may have to change it.
Regards,
Sadashivan

INTRASTAT Dispatch Report not Showing VAT Registration Number

Hi
we have currently set-up the intrastat report in our systems, during the testing of the scenarios we notice that for dispatch (RVEXST00) report the line item for returns does not display the VAT registration number, am not sure if anyone encounter this problem before. We would like to know is this common or could be a bug in the program. We could not find any references pertaining to this topic, hope to have some feedback.
Regards
Ken

Read the below SCN details:-
VEFU - Manual add entries for INTRASTATE declaration
Regards
Waza

ISO code 0 is not correct in the VAT registration number

Hello everyone!
Where can I adjust this error message so that I can make it as a Warning only? Thank you.
Message No. AR191 -- ISO code 0 is not correct in the VAT registration number

Dear Marlon
Goto
IMG>SAP Netweaver>general setting>set countries>Define Countries in mySAP Systems>select the coutry and double click on it>u will get properties tab under which ISO code is defined. Here u have to enter country name in ISO CODE and ISO code 3 char [enter the relevant 3 char as per your country.
Also check Set Country-Specific Checks--> double click on country and check the length and checking rule (ex vat reg no)
Hope your problem will be resolved
Regards
Sandeep Bhowmick
Edited by: Sandeep Bhowmick on Sep 29, 2009 12:00 PM

ISO code 57 is not correct in the VAT registration number

Hi Gurus,
When we are trying to upload the customer master data, while entering the VAT No it is saying the following error:
ISO code 57 is not correct in the VAT registration number
Message no. AR191
Could some body help me out.
regards
Srikanth

Hi,
Reason can be due to,
The length of the VAT number, which is important for this check,
is stored in field UINLN.
If the check comes across an invalid format, an incorrect country key, or an incorrect check digit, the exception NOT_VALID is triggered, and an error message is sent. If the check runs successfully, nothing will be drawn to the attention of the user.
The check rules are stored in table T005 in the field PRUIN.
There are few rules defined for
1          Maximum value length, without gaps
2          Maximum value length, numerical, without gaps
3          Length to be kept to exactly, without gaps
4          Length to be kept to exactly, numerical, without
5          Maximum value length
6          Maximum value length, numerical
7          Length to be kept to exactly
8          Length to be kept to exactly, numerical
9          Check against country-specific edit format
0          Deactivate Postal Code Check for USA

Incoming invoice not get posted through workflow

Hi Experts,
I am working on workflows for incoming invoice used by bus2081. i am facing the problem when the user clicks on post button after verifying the invoice the workitem not posted .and is it showing debit and credit miss match . while posting it with out workflow the document was posted with out error even debit credit miss match
please give me the solution to overcome from this problem .
Thanks
Sreenath

Hi,
It seems to be authorisation issue.
Compare the invoice values which user is able to approve and not.
Maybe he doesn't have enough authorisation limit to post those invoices.
Ask him to do it from SBWP backend inbox.
If it is not going from his inbox means, check the SU53 t code after he clicks on post button.
Then see in SU53 whether any authorisation is missing.
It's not a workflow issue. If there is an issue in workflow means, he should not be able to post any invoices.
Cheers,
Raja.D

ISO code LU is not correct in the VAT registration number

HI,
Can a France customer have the Luxembourgish VAT registration number. If Yes. how can i configure this?

Hi,
Reason can be due to,
The length of the VAT number, which is important for this check,
is stored in field UINLN.
If the check comes across an invalid format, an incorrect country key, or an incorrect check digit, the exception NOT_VALID is triggered, and an error message is sent. If the check runs successfully, nothing will be drawn to the attention of the user.
The check rules are stored in table T005 in the field PRUIN.
There are few rules defined for
1          Maximum value length, without gaps
2          Maximum value length, numerical, without gaps
3          Length to be kept to exactly, without gaps
4          Length to be kept to exactly, numerical, without
5          Maximum value length
6          Maximum value length, numerical
7          Length to be kept to exactly
8          Length to be kept to exactly, numerical
9          Check against country-specific edit format
0          Deactivate Postal Code Check for USA

IChat not posting correctly (through AIM)

As of sometime yesterday, my version of iChat (which is 6.0.2, I noticed that wasn't a version listed here, oddly) has been acting funny for blocks of text for AIM. A buddy of mine copy and pasted a paragraph of text and, although I heard the post noise, until I closed the program completely and reopened it, I wasn't able to see that post. Additionally, after this is posted, iChat will not auto-scroll down to the newest post, instead I have to manually scroll down when a new post comes (including if I post). Is this a beta version and I wasn't aware of it? When I sign on to regular AIM, everything works fine. Thanks!
(I already sent this as feedback, as well, incase it's a bug.)
Message was edited by: ravenhaert

Hi,
for the extra Points
Note to other readers.
Apple stopped the Messages Beta from working on the 14 December 2012
People should have been encouraged to "reinstall" iChat 6 at that point by the Messages (Beta) menu > Uninstall option.
i.e. events have since over taken this Thread's info.
The iChat 2 beta back in Jaguar was also time Limited from the May 2004 until the end of October 2004 before being free with Panther
8:43 PM Thursday; February 14, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Vat registration number in 'Other' button

Hello All ,
I want to enter Vat registration number in 'Other ' button in vendor master data (control tab) . But in Tax report , it doenst appear when I enter it . The report takes the Vat reg only from the first screen which we enter on vendor master data .
How I can appear VAT reg number which I enter it to 'other ' on vendor master data in tax report ?
Regards,
Simar

Hi,
You have to post a document that actually uses the "Other " Vat number. The default for any postings is the usual number.
The tax report takes the number from the document and not the vendor master.
Kind regards

Wrong VAT registration number in billing document

Hi All,
We have issue of wrong VAT Registration Number determined in the billing document for the departure country SK & Destination country DE. In one case system has determined the own co, tax number in the VAT registration number and other case ship-to party's VAT registration number for same partner.
As per business wants ship to party VAT number only.it was created few days back.
Pls advaise on this.
Thanks,
naveen

Hello Naveen
For tax exempt, Intra-EU transactions, you need to specify both the VAT registration number of the company code and that of the customer. See the SAP documentation link below.
I don't have any advice on the config for the issue- why it prints co code VAT registration number once and that of SH party another time.
Please go through the following OSS note and those mentioned within for complete guidance on customizing for VAT for EU countries. There's a lot of stuff to take care of.
653544 - EU2004:New members of Europ.Union as of 01/05/2004
Help Documentation: http://help.sap.com/erp2005_ehp_04/helpdata/EN/e5/07804b4acd11d182b90000e829fbfe/frameset.htm

Something interesting with check rule for VAT registration no.

Hi Guys,
I found something weird in sap with check rule for VAT registration no.
If I set any of check rules for US and save(tcode oy17), then change the country of a customer from DE to US and save(not change the VAT registration no), the system post error messages "ISO code DE is not correct in the VAT registration number". But if I set rule for AU(australia) with same rule as US, and change the customer's country from DE to AU(not change the VAT no), no error happens and customer can be saved successfully. So anybody can give any explanation on this problem?
Thanks in advance, point will be rewared. Waiting for the comments.
Regards,
Alex

<TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%"><tr><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=add2d1.jpg" name="add_QTB_5174" id="add_QTB_5174" onclick="javascript:addRowToTable('QTB_5174',4,22.5);return false;"/></td><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=delete2d.gif" alt="delete" name="delete_QTB_5174" id="delete_QTB_5174" onclick="javascript:removeRowFromTable('QTB_5174');return false;"/></td><td><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=edit2d.jpg" alt="edit" name="edit_QTB_5174" id="edit_QTB_5174" onclick="javascript:updateTableRow('QTB_5174',22.5);return false;"/></td></tr></table>
<input type="hidden" value="QTB_5174" id="5174"><TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%" id="QTB_5174" name="QTB_5174">
this a sample code. I have marked the name attrib in bold.

VAT registration no. not posting through FM IDOC_INPUT_INVOIC_FI.

Similar Messages

Maybe you are looking for