Vbox Pool Networks on Interfaces w/o IP Address

Hi all,
I've configured a bunch of interfaces on my Vbox host employing VLAN Tagging
Those Interfaces are plumbed during boot time but the Host itself should NOT be reachable through these interfaces.
so besides the "normal" ones I use to reach the host e.g nge0 I have some empty hostname.nge1002 hostname.nge1003 and so on on /etc.
This works like a charm so far. and I can use them in desktop registered in VirtualBox if I manipulate the VDesktop config directly.
But since there are no IP-addresses configured on them, don't show up in Host or Pool configuration and the Desktop conf in Virtual box is removed when the desktop is powered down.
I really need this for security's sake.
Thanks & Kind Regards
Zoltan

Hi Christian,
althoug they are'nt supported Vlans work perfectly.
What I need to know is how to get those interfaces plumbed but not provided an IP into my desktop provider configuration.
I may be able to work around this by providing bogus ip-addresses in the hosts file but this is a little strange.
Thanks & kind Regards,
Zoltan

Similar Messages

HP LaserJet 5100 Postscript network printer interface to Embedded system

HP LaserJet 5100 Postscript network printer interface to Embedded system.
I have the HP LaserJet 5100 Postscript Network printer and want to interface it to Embedded system designed by using the ARM Cortex microcontroller and TCP/IP stack is also ported.
Using the Windows XP, i am able to print test.ps file on the HP LaserJet 5100 PostScript Network Printer.
( copy test.ps \\print_server\Print_port )
i need the documents which will help me for same.
please help...

It appears your printer is a commerical LaserJet printer.
You may get a better reponse by posting in the commercial LaserJet forums.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Multiple interfaces with same IP address?

Can anyone suggest how to configure multiple (logical or physical) interfaces with the same IP address?
There is a teaser in the solaris 8 man page for 'route' that suggests this is possible:
"In a change or add command where the destination and gateway are not sufficient to specify the route (for example, , when several interfaces have the same address), the -ifp or -ifa modifiers may be used to determine the interface or interface address."
I can find no other reference to -ifp or -ifa, and at the moment I cannot seem to bring up two interfaces (logical or physical) with the same ip address.
I realise this is an obscure config. Anyone intimately familiar with route of ifconfig?
AJB

Yes. I could have laid odds that this would be the first response :-)
I know it is unusual, and I am aware of the inherent issues with doing something like this. I have read the multipathing guide, but it wasn't that helpful, because I want the same IP address, not just the same subnet. It is NOT for load balancing, or failover support. I'm afraid I can't give too much detail at the moment because of the nature of research project. What I will add is that I want to do this on an 802.1q enabled NIC, on the same physical port, with different logical interfaces for each VLAN having the SAME IP address.
We can already do this on Linux, and as I said in the original post, the route man page suggests that it can probably be done on Solaris. What I really need to know is how?
Any takers?
AJB

Brought interface rtls0 up, got address ***.***.**.101

i am having a problem
Every so often i get disconnected.
i get a pop up saying brought interface down.
Then at times if i disable my ipf.conf
Brought interface rtls0 up, got address ***.***.**.101
But i also notice it happens quite often weather
i have my firewall on or off so its not the firewall.
Also if i run azuerus peer to peer program it happens quite often
i read the instructions on how to manually have my interface at
an address i assign instead fo the DHCP assigned address
But perhaps i did that wrong?
vi /etc/hostname.my-interface
and in side the hostname i have
the address i want
***.***.**.101 netmask + 255.255.255.0
Do i need to also edit another file?
Could someone give me a step by step please
im confused
i read this
http://docs.sun.com/app/docs/doc/819-3000/fpdcn?l=en&a=view
Do i need to add any other information in the host file?
This is my hostname.my-interface file
***.***.**.101
netmask + 255.255.255.0
Thank you if anyone can help me
This is driving me crazy

By any chance is this an atheros driven interface?
Does ifconfig -a
show
ath* ?
alan

Another device on the network is using the same IP address

While this question has been asked within the community, I cannot find an answer that solves my problem. This happened about a year ago and was thought to be a modem/router issue. I switched to Airport and all had been fine until a few weeks ago. Now I periodically can't get online from my laptops.
Settings for my macbook at System Preferences ▹ Network ▹ Advanced ▹ TCP/IP are:
Configure IPv4: Using DHCP
IPv4 Address: 192.168.1.84
Subnet Mask: 255.255.255.0
Router: 192.168.1.254
Configure IPv6: Off
We did recently get a new ipad and new wireless printer so one of them may be the issue
Any help would be appreciated.
Thanks!

If you are having IP addresses assigned using DHCP and one of the devices is disconnected from the network for a long enough period of time then the router will make that IP address available to another device to use. If the first device then comes back on the network with the same IP address it had before then you'll get the dual IP address situation. This usually doesn't happen since the returning device is SUPPOSED to ask for a new IP address when it re-joins the network. In your case this may not be happening.
What I do is use static IP addresses for all the devices on my home network. In your case I think this will fix your problem.
Set up your Airport to 'reserve' specific IP addresses for the devices in your local network via their MAC addresses.
Open the airport utility, select your router, click EDIT, select NETWORK.
In the area marked DHCP Reservations: click on the + sign
Type a description of the device.
Use the pull-down menu to select "Reserve Address By: MAC address"
enter the MAC address in the appropriate line.
enter in the unique IP address for each device that you want to reserve. Make sure its in the same subnet (ie. 192.168.xx.yy)
click SAVE
Repeat the above for all your devices.
Update your airport settings.
When you're done turn off all the wireless devices for 5 minutes and then reconnect. Each should then reconnect with the same IP address each time. You can still leave the devices themselves set to use DHCP so that when you take them outsider your network, they'll request an IP address from the new network.
I hope this made sense. If not, post back and I'll calrify anything you need.

HT201184 What does this mean? How do I fix it? "Another device on the Network is using your computer IP address (then it gives current IP address)"

"Another device on the Network is using your computer IP address" is plaguing me. What can I do to correct this? It seems to come on after it has been inactive for some time.

Hi Delores,
What Encrytion does your Router/Modem use?
This might mean your Mac is set to a Static/Manual IP instead of using DHCP to request an IP, or another device is starting up with a Static IP & kicking your Mac off the Router.
If this is Wifi/Airport with little or no encryption,it could be somebody outside causing it.
How many things are connecting there?

Do primary domain network interfaces need an IP address?

To give a bit of background on this question...
Our company is in the process of being fully PCI compliant (this is the UK btw) and part of this is a requirement for data separation, effectively so that customer data is not available from other, less secure, areas of the network. To facilitate this we have a number of different networks, all firewalled off from each other.
I am creating a backup platform that will use multiple LDOMs in the different networks to back up specific systems and I can obviously control network access from within the domains (this is why I am using domains not zones)
The issue I am trying to avoid is the host server (or primary domain) having easy access to every network it is connected to.
So, my question is when I plumb an interface in the primary domain that I am going to assign to a VSW, do I need to give it an IP address? Can I assign it a null address and just have the interface plumbed into the right VLAN. In fact, does an interface need to be plumbed at all in the primary domain?
I guess what I am asking is do the guest domains use the IP address of the primary domain at all or is it completely separated by the hypervisor so that the guest domain effectively uses the network port as is.
Note: I am using VLAN trunked interfaces as well to increase the number of interfaces available to me in case that matters.
Josh

Are you connecting to a home network?
Talk to who setup the network.
What is the wording of the message? Typically yo have to enter a password set by the people who administer the network

Difference between Class Pool program and Interface Pool program

Both Class Pool program and an Interface Pool program indicate that the program contains interfaces that other programs can use globally. What exactly is the difference between them?

Transparent Table :
Exists with the same structure both in dictionary as well as in database exactly with the same data and fields.
" Pooled Table :
Pooled tables are logical tables that must be assigned to a table pool when they are defined. Pooled tables are used to store control data. Several pooled tables can be cominied in a table pool. The data of these pooled tables are then sorted in a common table in the database.
" Cluster Table :
Cluster tables are logical tables that must be assigned to a table cluster when they are defined. Cluster tables can be used to strore control data. They can also be used to store temporary data or texts, such as documentation.
" what is the major difference between Standard tables, Pooled tables and
" Clusterd Tables?
A transparent table is a table that stores data directly. You can read these tables directly on the database from outside SAP with for instance an SQL statement.
Transparent table is a one to one relation table i.e. when you create one transparent table then exactly same table will create in data base and if is basically used to store transaction data.
A clustered and a pooled table cannot be read from outside SAP because certain data are clustered and pooled in one field.
One of the possible reasons is for instance that their content can be variable in length and build up. Database manipulations in Abap are limited as well.
But pool and cluster table is a many to one relationship table. This means many pool table store in a database table which is know as table pool.
All the pool table stored table in table pool does not need to have any foreign key relationship but in the case of cluster table it is must. And pool and cluster table is basically use to store application data.
Table pool can contain 10 to 1000 small pool table which has 10 to 100 records. But cluster table can contain very big but few (1 to 10) cluster table.
For pool and cluster table you can create secondary index and you can use select distinct, group for pool and cluster table. You can use native SQL statement for pool and cluster table.
A structure is a table without data. It is only filled by program logic at the moment it is needed starting from tables.
A view is a way of looking at the contents of tables. It only contains the combination of the tables at the basis and the way the data needs to be represented. You actually call directly upon the underlying tables.
. Transparent tables (BKPF, VBAK, VBAP, KNA1, COEP)
Allows secondary indexes (SE11->Display Table->Indexes)
Can be buffered (SE11->Display Table->technical settings) Heavily updated tables should not be buffered.
II. Pool Tables (match codes, look up tables)
Should be accessed via primary key or
Should be buffered (SE11->Display Table->technical settings)
No secondary indexes
Select * is Ok because all columns retrieved anyway
III. Cluster Tables (BSEG,BSEC)
Should be accessed via primary key - very fast retrieval otherwise very slow
No secondary indexes
Select * is Ok because all columns retrieved anyway.
Performing an operation on multiple rows is more efficient than single row operations.
Therefore you still want to select into an internal table.
If many rows are being selected into the internal table,
you might still like to retrieve specific columns to cut down on the memory required.
Statistical SQL functions (SUM, AVG, MIN, MAX, etc) not supported
Can not be buffered
IV. Buffered Tables (includes both Transparent & Pool Tables)
While buffering database tables in program memory (SELECT into internal table) is generally a good idea for performance,
it is not always necessary.
Some tables are already buffered in memory.
These are mostly configuration tables.
If a table is already buffered, then a select statement against it is very fast.
To determine if a table is buffered, choose the 'technical settings' soft button from the data dictionary
display of a table (SE12). Pool tables should all be buffered.
More at this link.
http://help.sap.com/saphelp_erp2004/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
Transparent Table:
Exists with the same structure both in dictionary as well as in database exactly with the same data and fields.
Pooled Table:
Pooled tables are logical tables that must be assigned to a table pool when they are defined. Pooled tables are used to store control data. Several pooled tables can be cominied in a table pool. The data of these pooled tables are then sorted in a common table in the database.
Cluster Table:
Cluster tables are logical tables that must be assigned to a table cluster when they are defined. Cluster tables can be used to strore control data. They can also be used to store temporary data or texts, such as documentation.
A transparent table is a table that stores data directly. You can read these tables directly on the database from outside SAP with for instance an SQL statement.
Transparent table is a one to one relation table i.e. when you create one transparent table then exactly same table will create in data base and if is basically used to store transaction data.
A clustered and a pooled table cannot be read from outside SAP because certain data are clustered and pooled in one field.
One of the possible reasons is for instance that their content can be variable in length and build up. Database manipulations in Abap are limited as well.
But pool and cluster table is a many to one relationship table. This means many pool table store in a database table which is know as table pool.
All the pool table stored table in table pool does not need to have any foreign key relationship but in the case of cluster table it is must. And pool and cluster table is basically use to store application data.
Table pool can contain 10 to 1000 small pool table which has 10 to 100 records. But cluster table can contain very big but few (1 to 10) cluster table.
For pool and cluster table you can create secondary index and you can use select distinct, group for pool and cluster table. You can use native SQL statement for pool and cluster table.
A structure is a table without data. It is only filled by program logic at the moment it is needed starting from tables.
A view is a way of looking at the contents of tables. It only contains the combination of the tables at the basis and the way the data needs to be represented. You actually call directly upon the underlying tables.
http://www.datamanagementgroup.com/Resources/Articles/Article_0106_2.asp
more info
http://help.sap.com/saphelp_erp2004/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
http://cma.zdnet.com/book/abap/ch03/ch03.htm
Check this links.
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://www.techinterviews.com/?p=198

INS-40724 No locally defined network interface matches the SCAN address

Hi All,
Getting the above error.
I verified that:
Public IP on both nodes is Primary interface
SCAN IP are on same subnet as Public IP network interface
SSH connectivity is verified on both nodes.
thanks

HI,
Define a public interface with a subnet matching the one you want to use for the SCAN. None of the locally defined network interfaces has a subnet matching the SCAN subnet.
More Information please cheek Oracle support id : Solutions for Typical 11gR2 Grid Infrastructure/RAC Database runInstaller Issues (Doc ID 1056713.1)
Thank you

Connection Pooling : Network Adapter could not establish the connection

Hi,
We have a client-server application wherein the server has a pooled connection to an Oracle 10i database. The application is developed in Java and we are using Oracle OracleConnectionCacheImpl API to manage the connection pooling( DYNAMIC pooling with a pool size of 5 and we are using ojdbc14.jar)
On certain occasions when activity is extremely high, the server attemtps to retrieve around 2 million datasets/records. The connection pool runs out of connections and we get the following error :
com.indigo.utils.DBEngineException: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at com.indigo.zclasses.DBTradingSource.getConnection(DBTradingSource.java:136)
at com.indigo.zclasses.DBTradingSource.getTicketMessages(DBTradingSource.java:8033)
at sun.reflect.GeneratedMethodAccessor749.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.indigo.basketserver.ServerSideUtil.ConfigUtil(ServerSideUtil.java:88)
at com.indigo.basketserver.RemoteServerImpl.ConfigUtil(RemoteServerImpl.java:543)
at sun.reflect.GeneratedMethodAccessor17.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:418)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:521)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:325)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:171)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:149)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:95)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:63)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:547)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:404)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:298)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:268)
at com.indigo.zclasses.DBTradingSource.getConnection(DBTradingSource.java:127)
This is happens in Production and despite our exhaustive efforts,we have been unable to reproduce it in our Testing environment so far.
A large number of login attempts are seen in the Oracle login monitoring table, around 50,000 but we dont think that should be an issue. At the time, when this problem occurs, there are other processes making connection to the DB without any issues. Also, after sometime, the connection is restored and no exceptions are thrown.
Any insight into how we could simulate,resolve or monitor this issue would be greatly appreciated.
Thanks,
Zuber

Hi. This a long-known issue, and is caused by the DBMS listener's incoming
request buffer becoming overloaded by many simultaneous connection
requests. It will fail some of them. I have seen this with a simple java
program that calls Driver.connect() identically 20 times in a tight loop.
Some of the calls will fail in this way, while others will succeed. The
solution BEA's pool has, is to have a delay option to have the thread
sleep a bit (half-second to a secod or so) between successive connection
requests. After that, don't close connections until they're broken. Keep
them and re-use them.
HTH,
Joe Weinstein at BEA Systems

Network Store Interface Service - Memory Leak on Boot

I wanted to compile and explain my solution to an issue in Windows 8.1 where NSI causes major RAM/Disk utilization in creating four files in C:\Windows\System32\networklist\icons
Related Threads
http://social.technet.microsoft.com/Forums/en-US/bebbd935-f6f8-47fb-b756-714c27f0da7d/win-81-rtm-slow-startup-thanks-to-network-list-service?forum=w81previtpro
http://social.technet.microsoft.com/Forums/windows/en-US/35aa5d51-89d4-4dfa-a4fa-1138ff8b43c8/system-slowfreezes-on-startup-svchostexe-uses-8gb-ram

Prior to noticing sluggish behavior during startup, I decided I wanted to give my Network a personalized name "Grimm Network." I achieved that by following this process: http://www.eightforums.com/tutorials/19670-network-name-change-windows-8-a.html
The error of my ways started when I poked around further...I changed Network Icon -> Icon to "Icon" from "Not Configured"
That is what trigger this startup behavior.
I went back and changed the setting to "Not Configured"
The registry entries referenced in the related posts I shared above were removed. Sure enough the files were no longer being deleted/created at boot.
This explanation is much more palatable than deleted registry entries with no further explanation was is advised in the other threads.
Prior to finding the other two threads, I did have to do some trial and error with root causing the services. With Task manager, I narrowed it down to 7 services. Then with Safe Mode w/ Networking, I narrowed it now to NSI and NETPROFM. After disabling NSI
during a normal boot, I noticed the issue was not happening. I then realized that there was a large amount of disk utilization, that allowed me to use Resource Monitor to see what files were being affected. Then searching for NSI related issue with Windows
8.1 led me to the above When reading through the related posts, it finally hit me when I saw that the registry entries were related to my custom named network...I remembered that I had changed some settings, specifically with the icon in SECPOL.MSC, and that
it must be related. This is how I deduced a non-registry entry changing solution to this problem.
In summary, go to SECPOL.MSC -> Network List Manager Policies ...
Look for your networks, open them up, and ensure that Network Icon -> Icon has "Not Configured" selected.
I hope this helps other people.
-Gary

Multiple network card interface question

ok so i work for my college as a student worker in network operations. today they did a makeover on the dorm network and added in some traffic shaping. Instead of getting 8mb down im getting 1mb down. Well one of the admins went to lunch and had the new config still open on his computer so i shifted over and decided to take a look at this new ruleset. Im not sure why he did it like this but the traffic shaping is not done by a per port basis but by a per ip basis. Well i started thinking at this point and pulled out my old computer and installed arch on it to use as a download box for all my bittorrent needs, i have this box loaded up with 6 nics (5 pci and 1 onboard) each pulling their own ip, how can i get arch to bridge all 6 nics (or multiplex) so i can get atleast most of my bandwidth back.
Yes i asked them to exclude me from the trafficshaping but was told it wouldnt be fair to the other students
Last edited by crashbox (2008-10-02 06:02:56)

Don't worry, I've re-posted this in the business forum, as I think that#s where it should be.

Network ce0 interface goes down when reboots or does not come up

Hi,
Have a V440 and on reboot the main ip ce0 is not up. I have to manually go in and ifconfig 192.168.1.3 up
My hostname.ce0
192.168.1.3
# wc /etc/hostname.ce0
2 1 13 /etc/hostname.ce0
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255
ether 0:3:ba:d5:ba:2b
ce0:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.76 netmask ffffff00 broadcast 192.168.1.255
ce0:4: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.72 netmask ffffff00 broadcast 192.168.1.255
ce0:5: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.66 netmask ffffff00 broadcast 192.168.1.255
ce0:6: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.47 netmask ffffff00 broadcast 192.168.1.255
ce0:7: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.42 netmask ffffff00 broadcast 192.168.1.255
ce0:8: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.69 netmask ffffff00 broadcast 192.168.1.255
ce0:9: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.88 netmask ffffff00 broadcast 192.168.1.255
ce0:10: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.45 netmask ffffff00 broadcast 192.168.1.255
ce0:11: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.90 netmask ffffff00 broadcast 192.168.1.255
ce0:12: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.98 netmask ffffff00 broadcast 192.168.1.255
ce0:13: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.73 netmask ffffff00 broadcast 192.168.1.255
ce0:14: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.87 netmask ffffff00 broadcast 192.168.1.255
ce0:15: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.48 netmask ffffff00 broadcast 192.168.1.255
ce0:16: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.103 netmask ffffff00 broadcast 192.168.1.255
ce0:17: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.44 netmask ffffff00 broadcast 192.168.1.255
ce0:18: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.78 netmask ffffff00 broadcast 192.168.1.255
ce0:19: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.46 netmask ffffff00 broadcast 192.168.1.255
ce0:21: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.56 netmask ffffff00 broadcast 192.168.1.255
ce0:22: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.77 netmask ffffff00 broadcast 192.168.1.255
ce0:23: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.80 netmask ffffff00 broadcast 192.168.1.255
ce0:24: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.83 netmask ffffff00 broadcast 192.168.1.255
ce0:25: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.84 netmask ffffff00 broadcast 192.168.1.255
ce0:26: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.67 netmask ffffff00 broadcast 192.168.1.255
ce0:28: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.41 netmask ffffff00 broadcast 192.168.1.255
ce0:29: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.64 netmask ffffff00 broadcast 192.168.1.255
ce0:30: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.57 netmask ffffff00 broadcast 192.168.1.255
ce0:31: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.71 netmask ffffff00 broadcast 192.168.1.255
ce0:32: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.86 netmask ffffff00 broadcast 192.168.1.255
ce0:33: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.59 netmask ffffff00 broadcast 192.168.1.255
ce0:34: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.65 netmask ffffff00 broadcast 192.168.1.255
ce0:35: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.104 netmask ffffff00 broadcast 192.168.1.255
ce0:36: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.97 netmask ffffff00 broadcast 192.168.1.255
ce0:37: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.70 netmask ffffff00 broadcast 192.168.1.255
ce0:38: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.74 netmask ffffff00 broadcast 192.168.1.255
ce0:39: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.79 netmask ffffff00 broadcast 192.168.1.255
ce0:41: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.68 netmask ffffff00 broadcast 192.168.1.255
ce0:42: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.43 netmask ffffff00 broadcast 192.168.1.255
ce0:43: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.85 netmask ffffff00 broadcast 192.168.1.255
ce0:44: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.105 netmask ffffff00 broadcast 192.168.1.255
ce0:45: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.60 netmask ffffff00 broadcast 192.168.1.255
ce0:46: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.82 netmask ffffff00 broadcast 192.168.1.255
ce0:47: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.96 netmask ffffff00 broadcast 192.168.1.255
ce0:48: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.94 netmask ffffff00 broadcast 192.168.1.255
ce0:49: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.81 netmask ffffff00 broadcast 192.168.1.255
ce0:50: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.106 netmask ffffff00 broadcast 192.168.1.255
ce0:51: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.53 netmask ffffff00 broadcast 192.168.1.255
ce0:52: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.91 netmask ffffff00 broadcast 192.168.1.255
ce0:53: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.49 netmask ffffff00 broadcast 192.168.1.255
ce0:54: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.63 netmask ffffff00 broadcast 192.168.1.255
ce0:55: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.102 netmask ffffff00 broadcast 192.168.1.255
ce0:56: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.62 netmask ffffff00 broadcast 192.168.1.255
ce0:57: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.107 netmask ffffff00 broadcast 192.168.1.255
ce0:58: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.130 netmask ffffff00 broadcast 192.168.1.255
ce0:59: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.131 netmask ffffff00 broadcast 192.168.1.255
ce0:60: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.132 netmask ffffff00 broadcast 192.168.1.255
ce0:61: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.134 netmask ffffff00 broadcast 192.168.1.255
ce0:62: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.135 netmask ffffff00 broadcast 192.168.1.255
ce0:63: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.136 netmask ffffff00 broadcast 192.168.1.255
ce0:64: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.138 netmask ffffff00 broadcast 192.168.1.255
ce0:65: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.139 netmask ffffff00 broadcast 192.168.1.255
ce0:66: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.140 netmask ffffff00 broadcast 192.168.1.255
ce0:67: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.141 netmask ffffff00 broadcast 192.168.1.255
ce0:68: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.142 netmask ffffff00 broadcast 192.168.1.255
ce0:69: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.143 netmask ffffff00 broadcast 192.168.1.255
ce0:70: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.145 netmask ffffff00 broadcast 192.168.1.255
ce0:71: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.146 netmask ffffff00 broadcast 192.168.1.255
ce0:72: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.147 netmask ffffff00 broadcast 192.168.1.255
ce0:73: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.151 netmask ffffff00 broadcast 192.168.1.255
ce0:74: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.152 netmask ffffff00 broadcast 192.168.1.255
ce0:75: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.153 netmask ffffff00 broadcast 192.168.1.255
ce0:76: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.154 netmask ffffff00 broadcast 192.168.1.255
ce0:77: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.155 netmask ffffff00 broadcast 192.168.1.255
ce0:78: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.156 netmask ffffff00 broadcast 192.168.1.255
ce0:79: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.157 netmask ffffff00 broadcast 192.168.1.255
ce0:80: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.158 netmask ffffff00 broadcast 192.168.1.255
ce0:81: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.189 netmask ffffff00 broadcast 192.168.1.255
ce0:82: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.211 netmask ffffff00 broadcast 192.168.1.255
ce0:83: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.212 netmask ffffff00 broadcast 192.168.1.255
ce0:84: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.213 netmask ffffff00 broadcast 192.168.1.255
ce0:85: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.214 netmask ffffff00 broadcast 192.168.1.255
ce0:86: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.215 netmask ffffff00 broadcast 192.168.1.255
ce0:87: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.216 netmask ffffff00 broadcast 192.168.1.255
ce0:88: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.217 netmask ffffff00 broadcast 192.168.1.255
ce0:89: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.218 netmask ffffff00 broadcast 192.168.1.255
ce0:90: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.219 netmask ffffff00 broadcast 192.168.1.255
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
Any help would be great!
Thanks
Marc

msglobal3 wrote:
Hi,
Have a V440 and on reboot the main ip ce0 is not up. I have to manually go in and ifconfig 192.168.1.3 up
My hostname.ce0
192.168.1.3
# wc /etc/hostname.ce0
2 1 13 /etc/hostname.ce0The 'wc' output shows that you have a blank line in the file.
Remove that line (so that 'wc' reports only 1 line present) and the interface will be brought up at boot time.
Darren

No network connection / interfaces in LiveCD

Hello world! For the first time I can't get a network connection while installing, did everything as usual until giving the pacstrap command it couldn't connect to the servers. The very same livecd worked fine installing on a laptop.
Here's some basic outputs:
ifconfig -a # shows "lo" only
ip link # same here too
lspci # 00:19.0 Intel 82579V
lsmod # e1000e 0
Does that last one mean the driver is lacking and I have bad luck with this specific controller not working on the go? If so, what can I do?
Last edited by lio94 (2015-02-08 21:14:02)

alphaniner wrote:If it's not working now with the same Evo livecd it used to work under, then it's a hardware problem. If it's a different Evo, then it could be a regression in the module.
Not sure if the same physical copy, so it might boot a newer release than then. I'll try with an older release tomorrow. What does this regression mean by the way?
edit: It is indeed a newer release I tried the past weeks. I'll try with this older Evo-CD I just found!
Last edited by lio94 (2015-02-14 18:39:10)

Netcfg not enabling interface (sets an IP address) if no link [Solved]

Hi;
When my computer boots, and the network cable is not connected (or the router is off), then the netcfg profile is not brought up.. like in "the old init scripts days".
So after there is a link I have to bring it up manually... is there a flag to bring it up even if there is no link? basically the old "ifconfig eth0 5.5.5.5" would do..
Thanks.
Last edited by daf666 (2012-12-08 21:46:57)

daf666 wrote:
Hi;
When my computer boots, and the network cable is not connected (or the router is off), then the netcfg profile is not brought up.. like in "the old init scripts days".
So after there is a link I have to bring it up manually... is there a flag to bring it up even if there is no link? basically the old "ifconfig eth0 5.5.5.5" would do..
Thanks.
man netcfg-profiles
SKIPNOCARRIER
‘yes’/‘no’. Don’t abort interface setup if no carrier is found.
Regards,
Tarqi

Vbox Pool Networks on Interfaces w/o IP Address

Similar Messages

Maybe you are looking for