VC reference char not auto-populating on Production Order

Experts,
I've created a reference char CAUFV_AUTYP & included it on my class 300. Intent is to influence certain behavior on the stand alone Production Order (CO01) configuration using VC (Header >> Configuration section).
Expectation is that when a Production Order is created, the CAUFV_AUTYP will get defaulted to a value "10" (for Production Orders) & when that happens, I want the VC to enable certain things for me on the configuration screen. I'm trying to write a selection condition & a pre-condition using the value of CAUFV_AUTYP = 10.
Problem - When I create a stand alone production order, I'm not seeing the CAUFV_AUTYP value auto populate to "10".
Any ideas on this? I was hoping that even before the Production Order commit to the CAUFV table happens, it shud have been able to read the AUTYP=10 & populate on the production order.
Thanks

I don't know whether you can do so. According to SAP help, you can only change BOM component (STPO table), task list operation (PLPOD), Sequence (PLFLD), and PRT value (PLFHD). You can put the object dependencies in BOM or routing.
You cannot just change any field in production orders (why would you want to change the field order category in the first place?).
You can also change the sales order via VCSD_UPDATE table. The object dependencies should reside in your configuration profile in this case.
Rgrds,
See the link for more detail.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm]
Edited by: ayethebing on Apr 17, 2011 3:37 PM

Similar Messages

Requirement plan number is to be populated in production order

Hi all,
Can anyone suggest how Requirement Plan Number given in MD61 can be populated in production order.
This is urgent.
Thanks
KumaraGuru

Hi Kumra,
When we create the Requirement Plan number in MD61 it is updated at PBIM table. And after running the MRP, Requirement plan number (PBDNR) is updated in the PLAF ( Planned Order Header ) Table.
I am not sure about, it can be populated in production order.
Le tus know your requirement so that we can help u further.
Regards,
R.Brahmankar

Activity price not getting updated at Production order

Hi All,
I have made activity dependent planning at cost centre and calculated the activity rate. The activity rate is showing correctly for the cost centre in KP26, but while confirming the production order (CO11N) the the activity price is not getting updated in production order. But material price is getting properly updated at production order.
Plz help me in identifying the possible areas of mistakes.
Regards,
BKD

Hi,
Please check the Period for which you have created the ht activity price is same as the period in the conformation. In the workcenter in which you are confirming please check whether the activities are assigned to the work center.
Bye,
Ramesh

Auto GR for PRODUCTION ORDER

Hi
I want to do auto GR fro production order ... which we have conformed qyt..
whether it is Partially CON or fully CNF...
IS IT possible?
regards
sesidhar

Hi,
Auto GR for Production Order is possible by following Customization Setting :
Go to -> OPKP--> Goods Receipt -
> Tick the check box of Automatic Goods Receipt.
Other way is You maintain Control Key with Automatic Goods Receipt ( i.e. PP03 / PI03) in Default Values Tab in Work center. Then also you will be able to do Auto GR after Confirmation.
Try above setting so you will be able to do Auto GR after Confirmation.
Hope it helps.
Reward if useful and revert if any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Jul 25, 2008 1:03 PM

Batch is not determined automatically in PRODUCTION order for components

Hi All,
Am working on the batch determination for the components by Goods receipt date(FIFO) during production order confirmation.
All the required settings are completed upto batch determination.But when click on the batch determination tab,batch is not picking in production order confirmation goods movement screen even though three batch stocks are available.
Kindly find the attachment for your reference.
Would grateful to your quick response.
Thanks!
Asirvad

Hi,
In general it should not be a problem. Request you to check below:
For the Batch Determination to work in production order for the components, you should have a value for the “batch entry” field. The values if set to “3” will carry out batch determination automatically and if set to “blank” will not carry out batch determination for the components in the production.
As well please refer the link for step by step checking.
SAP Batch Determination - SAPs'WORD - We SAP For Your Cause
Hope success :-)
Regards,
Krishnendu.

Revaluation of Activity type is not getting updated in Production Order

Hi,
I have run KSII , for actual activity price calculation. After this , the revalution of production orders was done.
But I am not finding any entry in Production order with a value of variance between Actual Price and Plan Price of the Activity type.
It sould come in the production order.
What can be the reason?
In OKEQ, for the Version '0' and the fiscal year, Revaluation has the entry ' 1.Own Business Transaction'. I hope this is correct.
But still the revalaution line item is not showing in Production Order.
Please help.
regards
Kamlesh

Hi Paolo,
Yes, MFN1 ran perfectly and I am also able to see the details in the screen.
My concern is, this revaluation should also have affect on Production order, thats what not happening.
Or let me know where can I see the affect of revaluation on Production orders.
regards
Kami

Cost analysis not showing up in production order

Hi All
Preliminary cost analysis is not showing up in the production order...can anyone suggest what could be the possible reason for this

Hi,
Once you issue goods(GI) to order then only you can see actaul cost in cost analysis in Production order.
if you are looking for target cost in cost analysis,you have to post goods receipt(GR) from order to inventory.
hope this helps you.
Thanks,
Rau

Need Authority Check so that Do not display Customer in Production Order

Hi,
I our business we use MTO in PP.Thats why Customer code with Customer Name is shown in Production Order General Tab.Now I want to restrict this view in production order so that no user can able to see the Customer Code and Name in production Order.
Please help me.
Regards
Kamal

HI,
Follow these steps:
1. Run T-Code SHD0
2. Enter "CO08" in the Transaction Code row.
3. Select the "Standard Variants" Tab
4. Enter ZCO08 as name. Click "create" button on the toolbar (top).
5. The CO08 screen will appear. Enter some data (test data) as sales order, line item no, material, plant and order type and press enter.
6. A pop up window will come, press enter.
7. The production order header screen will open.
8. Enter the required fields like quanityt, date and press enter. again a pop up will come, press enter.
9. Again a pop up screen will come, scroll down on this you will find sales order and other fields.
10. Now for Sales order, AFPOD-KDPOS, AFPOD-KDEIN, G.DelDate, 1.del.dat, Ordering prty, AFPOD-NAME1 and AFPOD-ORT01, tick the "Invisible" check box. And press enter.
11. Now cancel the production order by clicking cross from the top. This will exit the process without saving the production order. The change transaction variant screen will appear. Check for the check boxes, they will be ticked. Enter the short text for variant in the header data.
12. Click "Save". It will ask for package, Click on "local object", save with "&TMP". You will have to save for all the screen variants here. Just keep pressing save.
13. Now press back button. The SHD0 screen will come. In the Standard Variants tab, click on the activate button (beside the Name field).
14. Now run the T Code CO08, and make production order against sales order. In the production order header, the sales order related information will not be displayed.
Hope it is useful.
Try and revert.
Regards,
Rohit.

Settlement rule auto created in Production Order with Receiver Type as OIT

Hi,
I am creating a production order with material number in CO01. The system is automatically putting OIT in receiver category, in settlement rule.
And its populating the child materials there. I expect the parent material to be populated in the settlement receiver.
In the settlement profile maintained in order type, I have maitained MAT.
Please let me know, why system is autopopulating the role like above.
Regards
SR

Hi,
If you are going to settle the production order to Material, there is no need to enter Allocation structure in Settlement profile unless its used for variance settlement...
Allocation structure has an option to settle to OIT with a settlement cost element or primary cost element...which is why i wanted you to check for that.
Anyways, Follow the thread, this should help you
Change the Settlement Rule
Thx
PG

Vc - routing not being selected in production order

Hi PP Gurus,
We are working on variant.
Steps followed -
1. KAMAT material created.
2. Variant created for KMAT material.
3. Maintained configurable profile.
4. Super BOM made in CS01 for KMAT.
5. Dependency maninted in BOM.
6. Maintained relationship between Kmat and variant in CS40.
7. Super routing created for KMAT.
8. Dependency maninted in Routing.
9. sales order created for variant.
10. MRP run taken
11. Planned orders created during MRP run.
12 BOM exploed as per dependency defined in BOM.
Problem - When we are converting planned order into production order system is giving error message saying that rounting does not exists.
Please guide me if any thing is missing in above mentioned process.
Regards,
Abhay

Hi,
1. Routing is created in CA01
2. OPL8 parameters for routing is
      Applicaion = P , ALt task list Application = Blank
      Selection ID = 01 , Routing selection = 3
      Sequence exchange = 0 ,
      Task list type = N
3. Error Message during conversion is
   Popup opened saying No routing found mentioning material code, plant, qty and explosion date
   3 tabs are also there 1. ref operation selection 2. Change selection 3. exit.

Batch Number Not copied over from Production order to Confirmation

Dear Experts,
In the production order, I specify the batch # for the components. But when I do the confirmation, the batch number for the components is not getting copied over.
Can anyone suggest what has to be done.
Regards
Tom

Dario, I have not saved my confirmation. But when I execute CO11N and go to "Goods Movement" tab, I expect the Batch to be copied from the production order for the components. But the batch field is Blank.
How do we make the batch field to be copied over from the production order.
Thanks in advance.
Regards
Tom

Target Cost not captured in the production order.

Dear All,
I have created cost estimate for the FG material and moved the standard cost to FG material and created the production order.
In the production order ,I could see the Actaul cost & Plan cost,but the Target cost is ZERO.I have checked the entire and PP & CO settings ,it is OK.
Please let me know that what could be the reason for not capturing the Target Cost.
Regards
Subbu

Hi Subbu
1. Have you released the cost estimate from CK24 before GR from prod order? Check if field Current price in Costing 2 view is not Zero
2. If your contr area currency is different than comp code currency, then your costing variant should allow you to release the cost in contr area currency as well.. T code OKKN ("assignments" tab)
3. Check if target cost version 0 is defined properly and assigned to your contr area
4. check if variance key is there in your prod order.. you can assign default var key to plant in OKVW
5. Execute Variance calculation KKS1/2/6
Regards
Ajay M

Sales Order Not Getting Converted to Production order

Hi gurus,
I have a sales order and when on MTO process i try using CO08 to create a production order using with order type ZP02 , sales order no , item no , production plant the production order doesnt gets created . could anyone help me

Hi,
What is the error message you are getting?
Are you using strategy group 20 in material master?
Did you try using other order types?
Regards,
Senthilkumar

Sales deal not getting populated in Sales order.

Hi,
A new custom Agreement type is created for VISTEX agreement in our company. This has condition records table with primary keys as application, condition type, Sales orgs, materia, agreement and valididty date.
When I create a sales order for same Sales orgs, Sold to and material - it is not pulling sales deal in communication structure.What could be the reason for this. I debugged standard SAP and found that order is not finding access sequence. Access sequence does not get any data in agreement field which is VBAP-KNUMA_AG or KONP-KNUMA_AG. Fields is access sequence are VKORG MATNR and KNUMA_AG (table t682z).
Can anyone please help me to know if something missing in configuartion? Ot it is because order does not have enough data to find agreement or DO I need to manualy ipopulate value of agreement in field KONP-KNUMA_AG in any of sales order user exit.
Thanks
Swat
Edited by: Swati Swati on Mar 5, 2012 10:34 PM

Let me put more information on my question. We already have an agreement type ZBAB for which a sales order is populating sales deal. But that has condtion tables with fields VKORG KUNAG (sold to) and KONDM Material Pricing Gr). When I create an order , it finds condition record number (within standard SAP logic), using above three fields ( which is VKORG KUNAG and KONDM) from condition table A700. A700 is conditon table creted for ZBAB.
But for this new agreement type which has condition table A777 has fields as VKORG MATNR and KNUMA_AG, it is not working.
I suspect that it is because for the first one, we can get all field values like VKORG KUNAG and KONDM in sales order. But for 2nd one we have KNUMA_AG maintained in access sequence for which we dont have data in sales order.. so we dont have condition record number to get corresponditing agreement. But I dont know where to link this in sales order config or user exit.

Profit center to be populated in Production order without material.

Hi,
I am creating Process order without material for my requirement and the settlement receiver of these order will be a cost center. Now my requirement is the Profit center assigned to the cost center is to be populated in the Profit center field (CAUFVD-PRCTR) in Assignment tab of the Process order when saving the order. Kindly tell me how to achieve the same.
Thanks & Regards,
Ravi Kumar C.

Dear R.Brahmankar,
The exit referred in the note will trigger while opening CORO itself. But my requirement is to trigger after entering the cost center in the settlement rule (Settlement receiver is manually entered before saving the order). After entering the cost center in the settlement rule system should populate the profit center. Is there anyway to achive the requirement.
Regards,
Ravi Kumar C.

VC reference char not auto-populating on Production Order

Similar Messages

Maybe you are looking for