Batch is not determined automatically in PRODUCTION order for components

Hi All,
Am working on the batch determination for the components by Goods receipt date(FIFO) during production order confirmation.
All the required settings are completed upto batch determination.But when click on the batch determination tab,batch is not picking in production order confirmation goods movement screen even though three batch stocks are available.
Kindly find the attachment for your reference.
Would grateful to your quick response.
Thanks!
Asirvad

Hi,
In general it should not be a problem. Request you to check below:
For the Batch Determination to work in production order for the components, you should have a value for the “batch entry” field. The values if set to “3” will carry out batch determination automatically and if set to “blank” will not carry out batch determination for the components in the production.
As well please refer the link for step by step checking.
SAP Batch Determination - SAPs'WORD - We SAP For Your Cause
Hope success :-)
Regards,
Krishnendu.

Similar Messages

Batch Number Not copied over from Production order to Confirmation

Dear Experts,
In the production order, I specify the batch # for the components. But when I do the confirmation, the batch number for the components is not getting copied over.
Can anyone suggest what has to be done.
Regards
Tom

Dario, I have not saved my confirmation. But when I execute CO11N and go to "Goods Movement" tab, I expect the Batch to be copied from the production order for the components. But the batch field is Blank.
How do we make the batch field to be copied over from the production order.
Thanks in advance.
Regards
Tom

Storage location not getting copied in process order for components

Dear PP Gurus,
While making a production /process order the storage location of component materials is not getting copied from material master into the process order, it is showing any default storage location.
What couls be the reason for it..
For all components it is defaulting the same storage location.
Please throw some light on the issue what could be the reasoon for it..

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

Single production order for many materials

Dear Experts,
We can create a single purchase order for many materials. Like wise can we create a single production order for many materials which is produced from single raw material in same operation?
Thnaks,
Chetan

Chetan,
You can not create a single production order for multiple materials.
However, the workaround would be create one material as BOM header and and assign the remaining materials (for which you want to have production order) as BOM components with by-product or co-product. With this you can receive all the materials against one single production order.
This will have implication in many areas like planning and costing.
Evaluate the option with your FICO consultant also, before going ahead.
Regards,
Himanshu

Route not determing automatically at sales order level for some sales order

Dear All ,
Route not determing automatically at sales order level for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
I have checked all the forums but didn't find any solution for the same.
Looking for your inputs .
Thanks inadvance
Regards
Venkat

Hi
1. Copare the Routes which are Automatically determined and which are not automatically determined
2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
Thanks
RB

Show batch clasification char val of the production order material in COOIS

I want to display a characteristic value entered in the material batch classification of the production order material in COOIS report.
Ex: I maintain material stock code in material batch classification. Within the same material there can be multiple stock codes which is similar to dye lot number. I created production order for that material. I want to display that batch classification characteristic of the material in a separate column when display production orders of that martial in COOIS.

Dear,
Have you use the process batch? The classification characteristics of each process batch created for a production order are compared with the actual configuration characteristics.
If different characteristics are used for the classification, that is, if characteristics do not exist in the configuration, these characteristics are flagged as green by default in the detailed display.
Call interface:
An interface (parameter of the function module) can be used to call function module MILL_PC1_COMP_LIST outside C003, C011N from COOIS.
Or Call Transaction SE38 report PPIOA000 execute it.
You can refer the OSS note 519649 for it.
Regards,
R.Brahmankar

Restrict stock in production order for a batch

Hi PP Gurus,
I Have created a production order with assigning one raw material from various available batches.
When i create another production order, it shows the whole quantity in a batch as available quantity while i need, it should not show the restricted quantity in first order as available for the other.
Please give the hints.
Thanks in advance
ANI

Hi,
You have to activate that check box in your Checking rule in OPJJ and then you have to assign that respective Checking rule in Checking Control (OPJK).Selct your order type and Plant assign that Checking rule over here.
Regards,
Dhaval

Ouput type with medium '9' not determined automatically

Hi,
I have the following problem.
At the site I'm currently working I have to trigger a workflow from the output fro sales orders.
So I have set up the output type with medium '9' ('Events- SAP Business Workflow').
In the condition maintenance ( VV12 ) I have added the object type as well as the event that is linked with the object type and triggers the workflow.
I have tested the workflow and it works fine. ( bpth trigger as well as the functionality ).
The problem however is that the output type is not determined automatically any longer in the transaction to create / change sales orders ( VA01/VA02 ). In the determination log I see the message that the object type send to output determination is empty ( while in VV12 I filled it in (=VBAP)! ) and therefor the system is not able to check that the event is correct ( he shows the correct event though ! ).
When I manually enter the output type, he accepts it but does not copy automatically the event ( he fills in the object type VBAP though ! ) in the communication window. When I enter the event manually, he accpets this again and everything works fine.
So the major question that I have is why doesn't he default this automatically ( object type and event ).
Can somebody help me out here ?
When I use medium '1' (print) in the condition record, the automatical determination works fine.
So it definatelly has something to do with the fact that I enter medium '9' in my condition record.
Thanks in advance.
Erwin

Hello Erwin,
I know this is an incredibly old post, but I am wondering if you found a resolution to this issue. I have the same issue and cannot determine why I can see the enter in NAST for an output resulting from a condition record set as medium 9 with timing of 3. If I am in display mode of the sales order I can see it and also see the record in NAST. Like you, if I change the medium to Print, it proposes as expected in VA01, VA02, VA03. If I have the medium of 9, and change the timing to 4, my workflow process executes as expected.
Please let me know if you have any thoughts on how to resolve.
Thanks!
Jan

While TO creation SU management no will not determined automatically

Hai SAP Gurus,
i defind Bulk storage type with SU management.
while creation of TO ,SU number will not determined automatically.We need to give manually for each SU number for each pallet.If delivery comes 20 pallets...we need to enter 20 SU nembers.Very difficult to find the SU numbers each time.Kindly give me solution if any body knows.
reward points...

Hi Kishore,
We have a similar situation, but with external SU numbers.
do the storage section serach config and maintain the storage section indicators in the material master .
Know during the TO creation if the batch is mentioned in the TO then it will automatically pick the batch ( corresponding SU) into the TO.
Make sure you picking startegy is also correct for storage type.
Hope this helps !!!

Activity price not getting updated at Production order

Hi All,
I have made activity dependent planning at cost centre and calculated the activity rate. The activity rate is showing correctly for the cost centre in KP26, but while confirming the production order (CO11N) the the activity price is not getting updated in production order. But material price is getting properly updated at production order.
Plz help me in identifying the possible areas of mistakes.
Regards,
BKD

Hi,
Please check the Period for which you have created the ht activity price is same as the period in the conformation. In the workcenter in which you are confirming please check whether the activities are assigned to the work center.
Bye,
Ramesh

CST or VAT determination automatically in sales order

Dear all,
I want to determine the CST or VAT both in a single sales order for different Items based on plant regions and customer region.
for more details let me give you an example.
I have,
           2 plants - A(Maharashtra), B(Delhi)
           Customer - X (Delhi), Y (UP)
           Material - M
now I create an order for customers X and Y with the same material M
Scenario 1
SP - X (Delhi)
             -Matl <-----> Plant <--
> Taxes
             -M    <-----> A (MH) <-----> CST
Scenario 2
SP - X (Delhi)
            -Matl <-----> Plant <--
> Taxes
             -M    <-----> B (DL) <-----> VAT
Scenario 3
SP - Y (UP)
            -Matl <-----> Plant <--
> Taxes
             -M    <-----> A (MH) <-----> CST
Scenario 4
SP - Y (UP)
             -Matl <-----> Plant <--
> Taxes
             -M    <-----> B (DL) <-----> CST
Are the above scenarios possible automatically?
what kind of settings required in the pricing procedure and how the Condition records should be maintained?
If I am giving any wrong example technically.
Just suggest me the settings in pricing procedure and condition record maintenance
to determine CST or VAT for the same material depending on the different combinations of Customer Region (State) and Plant Region(State)
Thanks alot in advance for the time spent and helping me out by solutions.
Best regards,
Vojas
Edited by: Vojas6 on Mar 25, 2009 12:19 PM
Edited by: Vojas6 on Mar 25, 2009 12:24 PM
Edited by: Vojas6 on Mar 25, 2009 12:35 PM

Hi
It can be determined automatically in sales order
but for this you have to maintain in Material master (CST & VAT maintain the Tax classification)
and also for the Customer master cst & vat tax classification
create condition table for both the condition types with fields
Country/PlntRegion/Region/TaxCl2Cust/TaxCl.2Mat
maintain the condition records as per the matrix combination
regards

Condition type not flown(not determined) into the sales order

Hello Experts,
There is one discount condition type which is having proper condition records, validity date.However, it is not getting determined properly and is not flown into the sales order. the user wants to know why this may happen.I tried to reason it may be the sales order date and the conditon record date may be different or the condition record is changed after the creation of the sales order.neither of the reasons seem to hold good. any ideas?
Regards,
Raj

Hello,
I have looked into the analysis and asked him to update the condition by clicking on that.also, I found that the condition record is having a proper valid date. now the user would update only after knowing the exact reason why it did not flow into the sales order,he knows he has to update the condition but would not do so till he knows the right reason why condition is not determined in the sales order. now this is the situation.
the probable reasons as per analysis of the conditon type are as follows(for your information). can it be one ofThere are different reasons for this:
1)The condition was deleted manually in the item condition screen.
2)The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again. them?
Regards,
Raj.

HECess on CVD amount not determined automatically in MIGO

Hi,
We are using ECC 6.0 and TAXINN.
Condition type for HECess on CVD is 'J1CV'.
CVD amount, ECess on CVD and Additional Custom Duty amount are determined automatically in MIGO.
But HECess on CVD amount not determined automatically in MIGO.
Regards,

Make sure you and configured all the Account determination settings in Logistics - General--Tax on Goods Movements-India-Account Determination. For GRPO ETT....
And also check you had maintained the default settings for import--Logistics - General-Tax on Goods Movements-India-Basic Settings-Determination of Excise Duty-Maintain Excise Defaults...
and check the sub transaction for import is maintained or not.....................

Is possible to create a TO automatically after production order confirmation?

Hi all
I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
is possible to create a TO automatically after production order confirmation in a standard enviroment?
Thanks in advance for all your comments

Hi Gurus,
Thank you for your help in this case.
Process:
The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created ( we can see this in LS24 ).
Requirement:
They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
Workaround:
They are creating the TO in background in LB10. ( negative is fixed )
Question:
Can we create the TO automatically after confirmation in standard configuration?
if no , how can we confirm this TO .using a JOB option?
TR created after confirmation
TR header
LS24 negative units.
Regards!!
Ronald

How do we do production orders for same item code in different sizes

Hi,
We have Items which we buy as a single sheet of material and our customers can ask for us to cut the complete sheet into different sizes before despatching it. i.e
Item Code Sheet1: Sheet size 100mm x 100mm
Customer asks for sheet to be cut into 10 off 10mm x 10mm sheets, which we presently put on the sales order as a line note
We then generate a production order for this item and indicate on the production order printout the line note
We've recently had a customer who has asked for Item 1 in two different sizes on the same sales order ie
Order Line 1 Sheet1 Qty:1 Line note: cut into 10mm x 10mm sheets
Order Line 2 Sheet1 Qty:1 Line note: cut into 50mm x 50mm sheets
When generating the Production order SAP combines the items into
Product No: Sheet1
Planned Qty: 2
Where as we want it to create 2 production orders 1 of each different sizes items.
I know I can create BOMs for those two sizes, but customers can ask for the sheets to be cut to whatever size they want. Is the best method to create BOMs on the fly for each different sizing option or are there alternative methods that are easier to manage ?
Thanks
Carl

Hi Carl Rutter,
You have to creat 2 special production order for this item. when issue the component make sure you issue the stock as per the cosumption becaue one have 10mmx10mm and the another item have 50x50 in this case you issue component by square inch wise. for example 10*10 = 100 squre inch.
50*50 = 2500 square inch so the cost will be approtionate. you can Use multiple uom method to obtain this, other wise you have covert into stock then you issue the component. If you want traxk size wise ,you can use batch option for Finishe goods.
Regards
Sridharan

Batch is not determined automatically in PRODUCTION order for components

Similar Messages

Maybe you are looking for