' + ' ve &  ' - ' ve quantity in copying control

I tried to copy a quote (12 qty) to order(11 qty), but when I went back to the quote again, it still had the open qty remaining as 12.
Steps done (All using standard):
QT= 10 qty doc complete
QT->OR 10 qty doc complete
Check QT- 10 qty
Which one is the open qty:
Line Item qty
Schedule line order qty
Schedule line confirmed qty
Can anyone tell me if I am checking at the wrong place or have missed out any step in between.
Discussion locked.
Reason: Duplicate post - Copy Control: Positive/Negative Qty, Open Qty is still Open in Quotation when an Order is created using quote as refernece
Message was edited by: Jyoti Prakash

Hi,
This controls how the quantity is to be dealt from the source document to the Target document. For example, your are creating a quotation QT; with reference to the quotation you are creating a sales order OR. If the quotation is for 1000 pieces. First you create a sales order for 750 pieces. So what should  happen to the quantity given in the source document. This is exactly controlled by this field. In this case it should be 1000- 750=250 is to be updated. So, at item category level (AGN) it is given positive sign.
Take a different example: You are creating a quantity contract CQ; then you are creating a return order with reference to this quantity contract. Let the quantity contract was created 1000 pieces; after so many sales order the remaining quantity is 870 pieces. Now you are creating a return order for 100 pieces with reference to Quantity. What should happen to the source document Quantity contract CQ? This is controlled by the /- field. By logic, in this case the quantity contract should increase to 870100=970. So the quantity contract is eligible for 970 pieces after this transaction. That is why the item category KMN while copying from CQ to RE is shown as negative.
For example, if you change the sign from positive to negative in item category AGN while copying from Quotation QT to Sales order OR, the eligible quantity to be copied to the sales order will increase every time you create a sales order.
Regards,
K Bharathi

Similar Messages

  • Pricing Copy control

    Hi can anyone explain me working of pricing copy control ?
    Especially significance of condition control H and F in pricing copy control
    Thank you

    Dear Nikhil
    While carry out billing, you can determine the basis for billing based on the data you maintain in "Billing Quantity" of Copy Control.
    A: Relevant for delivery-related billing documents
    Outbound delivery is the basis for billing. The billing document status is only updated in the outbound delivery.
    B: Relevant for order-related billing documents
    The sales document is the basis for billing. The billing status is defined by the required quantity.
    In the standard system the item categories REN (returns) and BVN (cash sales) are set up in this way.
    C: Relevant for order-related billing documents
    The sales document is the basis for billing. The billing status is defined by the target quantity.
    In the standard system the item categories G2N (credit memo) and L2N (debit memo) are set up in this way.
    D: Relevant for pro forma
    To create a pro forma invoice, the billing relevance indicator must be blank. In addition, indicator D for cross-company code business processing should be used as follows:
    In the case of free-of-charge outbound deliveries, an internal allocation should be made to the company code for the delivery.
    The indicator D allows you to make free-of-charge outbound deliveries.
    F: Relevant for order-related billing documents - Status according to the invoice receipt quantity
    Relevant for order-related billing on the basis of the invoice receipt quantity (third party business transaction). The system only puts the order into the billing due list, if in Purchasing the invoice has been received from the vendor and processed. After every invoice receipt, a customer invoice is created in addition to the quantity given in the incoming invoice. The order applies until the next invoice comes in from the vendor.
    In the standard system, the item category TAS (third party business transaction) is set up in this way.
    Alternatively this procedure can refer to the quantity of goods received.
    You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing by carrying out copying control for billing at item level in the billing quantity field.
    G: Relevant for order-related billing of the delivery quantity
    The order is relevant for billing, but the cumulated quantity already delivered. This means that you can bill a number of partial deliveries in one transaction.
    H: Relevant for delivery-related billing documents - no zero quantities
    You can use this to prevent items with zero amount being included in the billing document.
    I: Relevant for order-related billing documents - billing plan
    Billing is carried out using the billing plan and its status. The status of the order item is understood to be the total status of the billing plan billing statistics.
    In the standard system, the item categories WVN (Service), MVN (rent) and TAO (milestone billing) are set up in this way.
    J: Relevant for cross EC country deliveries.
    thanks
    G. Lakshmipathi

  • Copy control Settings from a Quotaion to Value contract/Quantity Contract

    Hello Friends,
    I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
    Thanks and Regards
    Mohammed Roshan

    if you run VTAA you would try to create a copy control as follows:
    source: QT (quotation)
    target: CQ (quantity contract)
    say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
    hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
    save it and test.
    good luck!

  • Copy Control - Address Details from Quantity Contract to Purchase Order

    Dear Experts,
    When I create a Purchase order w.r.t a Quantity Contract, in some cases the address details (such as street address, phone #, e-mail etc.) are copied from Quantity contract and in other cases they are copied from the vendor master. I compared the vendor masters and quantity contracts in both the scenarios and cannot figure why this is so.
    The way I create a PO is to use the selection variant option in ME21N to pull in the Quantity contract and then 'Adopt' the details.
    Is there a address copy control functionality somewhere at the vendor master level that governs this behavior?
    Examples:
    1) Vendor A has telephone 888-888-8888 on vendor master data and QC 5000001 has 999-999-9999 as telephone for the same vendor in the quantity contract. When I use this QC, 999-999-9999 copies over to PO and this is desired/correct
    2) Vendor B has telephone 888-888-8888 on vendor master data and QC 5000002 has 999-999-9999 as telephone for the same vendor in the quantity contract. When I use this QC, 888-888-8888 copies over to PO and this is not desired/incorrect
    Any insight would be helpful
    Thank You
    Siva
    Edited by: Sonshine on Feb 23, 2012 3:53 PM

    Hi Arminda,
    The note refers to the Plant/shipment Delivery address and I am having trouble with the communication address (supplier address, email, fax, telephone etc.) of the vendor.
    Any other inputs?
    Thanks
    Siva

  • Copy controls from quotation to contract

    Hi,
    My client want to create contract w.r.t quatation.
    I maintained the copy controls for the same but target quantity is not getting updated in contract w.r.t qutation
    2)while creating contract without reference order quntity is not getting updated.
    Pls suggest what i may missed
    Thanks in advance

    Hello Dear
    This is NOT standard SAP process flow.
    But make sure u have copy control at HEADER and ITEM CATEGORY level.
    And as your qty is not getting copied that means some thing is wrong with Routines( copy control and data transfer).
    Thanks,
    Dilip Sadh

  • COPY CONTROL: SALES ORDER WITH REFERENCE TO QUOTATION

    Hi.
    We are creating a sales orders with reference to a quotation. When copying, we'd like to be able to include another new position type in the sales orders.
    For example:
    QUOTATION:
    POSITION 10: TYPE ZTAB
    SALES ORDERS:
    POSITION 10: TYPE ZTAB
    POSITION 20: TYPE IRSS.
    Where could we place this change?. We suppose when saving the sales orders. Does anybody know how could we make this change?.
    Thank you very much!.
    Raú

    What do you mean by position type?
    Please use the language used by SAP so that it could be easily understood.
    What is ZTAB & IRSS. Are they materials?
    Regarding copying, this is a brief theory
    In copy control, you define control data for the document flow of sales documents.
    You can specify for a particular sales document type, which document type is to be assigned to copied reference documents, and which item categories or schedule line categories are to be copied.
    You must also make specifications for copying requirements and data transfer, as well as quantity and value updates in document flow.
    In precise, you are telling the system what data to copy from QT to sales order. It copies data from Quotation order type to Standard order type basing on settings you indicated in copying control.
    System won't do anything more than copying from preceding documents and it would transfer data based on copying rules in copy control.

  • Copy control in contracts

    Good afternoon!
    I´m having problems regarding copy control between contracts and release orders.
    Here´s an example:
    Contract 40000019 has an item for 100 pcs.
    I input a order which is referenced by this contract, and the system proposes a quantity of 100 pieces. The quantity is changed to 50 pcs manually and is delivered afterwards.
    When I input a second order, the system proposes again 100 pieces.
    First question: Is there anyway to make the system propose only the un-delivered quantity? i.e. the remaining 50 pieces?
    Second question: how do I make the system not to copy rejected items?
    Thanks in advance,
    Adriano Cardoso

    Hi ,
    In standard system settings once we take the reference it will copy either whole quantity or nil quantity.We can make the quantity field as empty by making changes in copy controls.If you want to make the balance quantity for delivery ,then need to adda  piece of code for your copying requirement for field VBAP.KWMENG and check the quantity already delivered by going in to VBFA table then pick all the subsequent documents for the contract.
    It is also important to check the field update document flow tab in copying controls to restrict the quantity.
    Hope it helps.
    Regards,
    Pasapula.

  • Issue in Pricing Type in copy control: sales document to sales document

    Hi,
    I am trying to create a sales order with reference to quotation.
    I have a pricing procedure assigned to both documents.
    Now the business scenario is -
    1. Create a quotation. for a material of x quantity
    2. create a sales order with reference to the quotation and even if though quantity is changed in the sales order for the same material but total price should not change.
    I am trying to do this through copy control.
    in copy control for item category AGN i have selected pricing type E.  but still when i change the quantity in sales order. the total price is changing.
    can anybody help me with pricing type.
    Edited by: ankit.k.agarwal on Jun 27, 2011 9:44 AM

    Hi,
    Your pricing is in relation to quantity so when you change it price automatically Calculated by system
    For your requirement go to V/06
    go to details of condition say std PR00 and change CALCULATION TYPE as amount
    Kapil

  • Issue with copy control of Delivery document to Billing document

    Hi All,
    I am having some issue with copy control of Delivery document to Billing document.
    I am having two line items in Delivery documetn, one is for item to be delivered to customer and other which is created due to batch determination.
    Now , when I create billing document (VF01) with reference to this delivery document , I want only one line item (for the one which needs to be delivered to customer).
    I have used following things in  copy contro from ZLF to ZF2:
    Copying requirements: 004 ( Deliv-related item)
    Data VBRK/VBRP: 007 "(Inv.Split (Rec/Div))
    Is it correct or shall I use something else, so I have only one line item in Billing document.
    Regards
    Nidhi

    Pls. search the forum.
    Pls. refer the below link -
    Line with 0 quantity for main item with batch split
    Thanks

  • Copy Control For Individual Purchase Order

    Hi, experts,
    can you explain to me concretly how to customize the copy control for individual purchase order? We have of course the item category TAB (billing relevance: delivery-related billing) and Sales Order (delivery related billing type: F2). How will the copy control customized with tranc.VTFL? Please give me hints at both header level and item level. I appreciate your help.
    Best regards,
    Fan.
    Edited by: Fan Mou on Jul 22, 2009 11:49 AM

    Hi Fan Hou,
    The individual Purchase order scenario is as:
    Sales order  >Purchase Requisition>Purchase order-->Good receipt --> Delivery and PGI --> Billing(wrt Delivery)
    The  creation of purchase requisition and thereby purchase order is controlled by the schedule line(in std CB). The goods are received with ref. to PO.
    As far as copy control is concern it will be as
    1)OR-->LF and item category will be TAB
    2)LF-->F2 at header level .( can refer the std, )
    at item level it will have item category TAB.and will be as
    Copying requirements  004
    Data BARK/BURP  001
    Billing quantity  B(Delivery quantity less invoiced quantity)
    Pos./meg. quantity +
    Pricing type G
    For further reading /reference you can go through the:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
    Hope this will help you.
    Revert us in case of any issue.
    Regards,
    Atul

  • Positive and negative qty in copy control

    Hi,
    In my copy controls i'm not able to make any change for the positive/negative qty field at the item caegory level as it is gradeout(display mode).
    my scenario is i'm trying to create a Intra company proforma invoice with item category as NLC and the quantity can either be picked or not..
    Thanks in advance.

    Hi
    Kindly check the below
    1.Delete the copy controls and recreate the  same for your settings
    2.Use the report RVDELSTA
    3.Check th eOSS notes 445763 it may help you
    Regards
    Damu

  • Copy controls & Pricing

    Right now, in the copy control of delivery to invoice, at item level pricing type is G.
    Now,
    During SO, at item level , I manually "update" with C. After this, the same price should reflect in the invoice.At invoice, there should be no manual 'update'.
    what is the pricing type to be set in SPRO ( so that, no manual update with C is needed at SO header) for this & at what level?
    Request an expert to guide me soon, on this, as the actual pricing issue is a  bit complicated to explain.
    Rgds
    Sumanth.G
    Edited by: SUMANTH GURURAJ on Nov 3, 2011 10:40 PM

    Dear Ram
    FOB Price = 'Base Price' - (sum of ' frieght' & 'insurance')
    The above logic is in Alt calc Type :12 & is assigned to 'FOB Price' in pric proc.
    'Frieght' & 'insurance' are MANUAL HEADER conditions.
    Now, with G,
    at header level in invoice, when we enter 'frieght' & 'insurance' manually, the 'FOB Price' is NOT getting calculated. ( in 'condition value' column).
    With B, the 'FOB Price' is getting calculated' ( as described above)
    The problem, is the client does NOT want to use B ( for below mentioned reasons)
    with B, only the current billing date is considered.**
    The client wants SO PRICING DATE ( which G is fulfiling) ( but G hs limitation, as explained above)
    Any other pricng types, which u suggest?
    or shall I try to insert a condition category to 'FOB Price' (which is blank now)
    The 2 c. types are :
    'FOB Price' -
    Cond. class B Prices
    Calculat.type C Quantity
    Cond.category (blank)
    Rounding rule Commercial
    StrucCond. (blank)
    'Frieght' & 'Insurance' (manual hearder conditions)  are then added together to  a subtotal,& inturn made  a single condition type as below.
    'Frieght & insurance'
    Cond. class A Discount or surcharge
    Calculat.type B Fixed amount
    Cond.category F Freight
    Rounding rule Commercial
    StrucCond. (Blank)
    Request an expert to kindly guide me on this.
    Immediate help would be appreciated.
    Rgds
    Edited by: SUMANTH GURURAJ on Nov 4, 2011 10:23 AM

  • Copy Control for splitting items

    Here is my situation...  a single delivery will contain multiple truckloads.  The business process cannot avoid that, and transaction VLSP (subsequent delivery split) is not an option to avoid that.  However, we must split the Pro Forma invoices out by truckload.  At first glance, this doesn't seem difficult.  Simply use a Data Transfer Copy Control routine to put the truck's trailer number into VBRK.  That way, each item will align to the right truck, and the Pro Forma creation process will automatically split into multiple resulting billing documents.
    But what about the scenario where a single item on the delivery is shipped on multiple trucks?  Item 000010 has 25 units of Material A.  19 go on Truck 1 and 6 go on Truck 2.  How do I get Item 000010 to go onto two different Pro Formas, with 19 units on one and 6 on the other?
    My best options so far are to process VF01 multiple times, once per truck, and reduce the quantity via the data transfer routine appropriately each time (with something included to figure out which truck is being processed each time), or to do a core code modification to split the delivery item into two items in the ALIPS structure before the data transfer routine is called.
    Am I missing a cleaner wat to solve this?
    Thanks,
    Chris

    hi,
    surely new coding is required for item level Billing plan copying from order to order,
    you can copy the 402 requirement do the changes according to your requirement by the help of ABAPERS.

  • Copy control settings for Multilevel variant configuration

    Dear All,
    I have  the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
    with reference to this quoatation a sales order is created.
    My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
    In copy control settings there is a field at item level called
    configuration :
    In this if I maintain value
    A: The variant is getting copied but  the values for subitems is not getting copied the values for main material is in changable mode.
    B: The variant is getting copied but  the values for subitems is not getting copied the values for main material are not in changable mode.
    C:The variant is getting copied   the values for subitems is  getting copied the values for main material are  in changable mode but the values for subitems are not in changable mode.
    My requiremnt  is that
    The variant must get copied
    the values for subitems must get copied
    the main material vlaues must be in changable mode
    the subitems vlaues must be in changable mode
    How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
    Informative answers will be provided maximum points.
    Deepak

    Hai Deepak Mehmi,
    please check in T CODE VTAA
    In the position check
    SalesDocType : Sales order type
    SalesDocType : Inquiry type
    Double clcik and check
    DataT 051 General header data       Copying requirements 002 Header-diff.customer
    DataT 101 Header business data
    DataT 001 Partner header
    And Tick mark for Copy Item Number
    For further check:
    In Item
                                      Copying requirements 301
    DataT 151 General item data                                          Pos./neg. quantity   +
                                                               Copy quantity
    DataT 102 Bus.data/item compl.                                     Pricing type         G
    DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                        Copy product select.
    FPLA  251 Conditions                Configuration
                                                               Campaign Deter.
    Regards,
    Mani

  • Copy control for Return Process

    HI every one,
    I am Doing the Return Cycle Process but i am not sure how to maintain the Copy Control because i am new to return process
    Billing Type : ZF2, Item category :ZTAN,Return Order : ZRE, Item category : ZREN, Billing Type  : ZG2 (Credit Note)
    give me how to maintain the Copy Control in VTFA,VTLA,VTFL
    Guideme
    Regards,
    Anu
    Edited by: Anuradha_SD on Sep 14, 2011 12:50 PM

    HI
    Let us talk about the Copy control VTAF
    I maintained the Copy Control Order Type ZRE,
    Target SalesDocTyp ZRE                    Source Bill. Type ZF2
                       Sales Return - JICPL                     Invoice - JICPL
    DataT 052 Billing doc.header        Copying requirements 021 Billing header
    DataT 103 Bill.bus.header data            Copy item number (TICK)
    DataT 003 Bill.header partner
    Target SalesDocTyp ZRE                    Source Bill. Type  ZF2
                       Sales Return - JICPL                      Invoice - JICPL
    ItemCat Proposal   G2N                    Item Category      ZREN
                       Request                                   Return Items -JICPL
                                        Copying requirements 303 Always an item
    DataT 153 Item from bill.doc.
                                                               Pos./neg. quantity
    DataT 104 Bill.bus.item data                               Pricing type         D
    DataT 004 Bill.item partner         X Update document flow
    bl.pl 0                                                    Campaign Deter.
    Target SalesDocTyp ZRE                   Source Bill. Type  ZF2
                       Sales Return - JICPL                     Invoice - JICPL
    SchdLneCatProposal DN                    Sched.Line Cat.    CP
                       Return - JICPL                           MRP -JICPL
                                        Copying requirements 303 Always an item
    DataT 002 Partner item
    Like that i maintained but at the time of Return order with reference to Billing Document its not working means
    if i take Second time Same billing Document Number system is showing same qty because i have already refered previously
    why system is showing same qty why it is not reduced
    guide me
    Regards
    Anu

Maybe you are looking for