Veeam new user setup, many questions

Vintas33 wrote:Should I setup one backup job for each VM or one backup job for all of the VMs?As many VMs per job as possible. This maximizes the benefits you get from dedupe and compression.
Vintas33 wrote:
How many retention points do you guys keep? Default is 14.As many as the customer's RPO requires.
Vintas33 wrote:If I schedule a backup job to run daily and I have 14 restore points then does that mean I only have 14 days of backups because Veeam will remove the 15th backup?Yes
Vintas33 wrote:Would you suggest a different job for weekly or monthly backups? Or just extend the retention policy to 30+ days?Depends on your RPO. If you're not doing reverse incrementals, you may want to do periodic fulls on a weekly or monthly basis (depending on your retained recovery points).
Vintas33 wrote:When setting up a new backup job, under...

New Veeam server/user here. I just built a new server with local storage. My Hyper-v cluster is a 2 node setup via Starwinds VSAN using all SSD for storage and mutliple 10GB fiber connections. My Veeam server is 12+ 7k SAS drives. I am also planning on using a new QNAP NAS to move some backups offsite/another part of campus. I have huge backup windows basically from 8pm until 6am.Should I setup one backup job for each VM or one backup job for all of the VMs?How many retention points do you guys keep? Default is 14.If I schedule a backup job to run daily and I have 14 restore points then does that mean I only have 14 days of backups because Veeam will remove the 15th backup?Would you suggest a different job for weekly or monthly backups? Or just extend the retention policy to 30+ days?When setting up a new backup job, under...
This topic first appeared in the Spiceworks Community

Similar Messages

  • New User Setups - My Face...

    Oh yeah!  Plus New User setup forms from HR with wrong spelling as well, and you get ahead of the game and go and setup every account they need, login as them to their new machine, an email goes out to all users asking them to welcome the new start, the GAL goes out to all remote Outlook users and everything - then they turn up for work on their first day and call you to say their name is spelt wrong.  Oh the pain, the anger, the postal feeling, then...   ah, the coffee - that's better.....
    And it all begins again.

    when I have to work on a new user setup for a unique snow flake...
    Instead of a common/sane/literate spelled name such as Matthew, I have to create Matthieui
    Or the latest one... Synthia instead of Cynthia.
    Nychole and Ashyliey and Jaemms
    http://www.stupidkidnames.com/all-the-stupid-names/
    ^-- Just ran across this. Ahahahahaha.
    Do parents not understand the psychological ramifications that comes with this???
    This topic first appeared in the Spiceworks Community

  • Customisation of New User setup pages.

    Is it possible to customise the New User setup screens/forms? If not, is it possible to add few more screens to capture more details?
    null

    It believe it is not possible to adjust these screens in the current version of Portal. The database packages that build these screens are wrapped.
    But we managed to create our own screens using the Portal API package (see PDK) that edits the user (wwsec_api.modify_portal_user). You can create an application component (form ) that is based on a procedure. It seems to work.
    I don't know if this also works for the creation of users (wwsec_api.add_portal_user).
    null

  • New User, Setup Problem

    Hello , i am a new user in J2ME (Mobile/Wireless). I was download the studio5me-win-en.exe file. I tried to setup but i take this message < A suitable JVM couldnot be found. Please run the program again using the option -is:javahome <JAVA HOME DIR> >. what can i do?
    Sorry for my English.
    John.

    To XxPeterPxX
    I have the same problem that you answered firstly, it's a nightmare! I did what you said and I ran: studio5me-win-en.exe -is:javahome c:\j2sdk1.4.2_01. A file download appears with only the 'open' (not 'save') option availabe. When I press open, the old message appears (i.e. -is:javahome <JAVA HOME DIR> ). Please can somebody help me I desperately want to get this program running. I would appreciate it if you would reply to my email address ( [email protected] ). However, if that is not possible, I will still be grateful for your reply to this message.
    Regards,
    Alex Kottke

  • New user setup question

    I just purchased a used iphone, I know that I need a new sim card to activate, my question is how do I know if the previous owner has left any of her info on it, what is the best way to set it up starting out with new sim card? Any help is greatly appreciated, thanks.

    I would also do a restore on it before you activate it.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • New user with several questions on forms and useage.

    Once a user fills out a form, is there a way to make the data in the text fields un-editable?
    While I'm here, on the same form there are several fields that are required to be filled out. Is it possible to prevent the user from being able to save the form before they fill out the required fields?
    I have an Excel file that when opened asks the user for certain data and automatically puts the entered data into the required cells using VB. Is it possible to do the same in Adobe?
    Been using Acrobat for years, but my company only uses it for simple pdf creation and maybe putting stamps on customer supplied files, so these probably seem like simple questions.
    By the way this is on Acrobat 8 Pro.
    Thanks for any help!

    Once a user fills out a form, is there a way to make the data in the text fields un-editable?
    Yes. The best is by using a digital signature. Second best is by using a script to set the fields as read-only at some point.
    Is it possible to prevent the user from being able to save the form before they fill out the required fields?
    No. You can set fields as required but that only applies when the file is submitted. You can display an error message when the file is being saved if some of the required scripts are not filled-in (using a script), but you can't prevent someone from saving the file.
    I have an Excel file that when opened asks the user for certain data and automatically puts the entered data into the required cells using VB. Is it possible to do the same in Adobe?
    Yes, that's possible. Again, using a script.
    By the way this is on Acrobat 8 Pro.
    This is quite an old version, not compatible with any current operating system. You should consider upgrading...

  • New user sample files question

    hello,
    i just installed the personal edition of lumira and want to know if there are any tutorials that use the data that is behind the "try with samples" button in lumira?
    i have watched several tutorials prior to installing the software and i didn't see any that use the sample files.
    i also browsed through some of the user guide for version 1.22 and it didn't use the sample files either, so i figure that i must be missing something.
    any help on how to get started learning lumira would be greatly appreciated.
    thank you

    hi henry,
    i watched several videos prior to installing the software to try and get a feel for what the software has to offer. i "hear" what you are saying about viewing tutorials, but many people don't learn that way. when you are trying to replicate something you see, using different data then the data shown in the video, it is very easy to forget something, then one would have to go back to the video, try and find the spot in the video that covers what you need. all of that back and forth is way too time consuming.
    no, i have no plans on creating training exercises or teaching lumira. my goal is to compare and contrast it with other bi tools.
    i have tons of spreadsheets of data. i imported some and realized that there is no way to change the formatting that i could find. for example, i wanted to add dollar signs to the data. the "display formatting" option doesn't have this feature.
    on the prepare tab, i didn't see any way to do that. perhaps this can be done when you actually create a chart, but i haven't gotten that far. i'm still trying to figure out how to manipulate the data once it's brought into lumira, so to speak.
    it could be me, but i get the feeling that it is best to have the data in the exact format that you need it in prior to importing it.
    hope this better explains why videos aren't working for me.
    thank you
    tracy

  • New XSan setup requirements questions

    Hello All,
    We're in the process of installing XSan in our facility, swapping out our current SanMP configuration. I had three questions about metadata controllers.
    1) How CPU intensive is the XSan MDC function? I wanted to repurpose one of our MacPro 1,1 as an XSan metadata backup controller, but I'm a bit worried that the cpu won't be Zippy enough, it's a 2.8ghz dual-core x2 xeon. This would be the back up controller and exclusively dedicated to the task.
    2) I understand that running XSan requires an OS X Server to manage permissions etc. But if I recall from our experience with XSan 1, the MDC could run on OS X client version just fine. The current Apple lit says otherwise. Would I be able to run our backup MDC on OS X client? We already have another xserve functioning as our OD master/file serve. So the Primary MDC running on OS X Server would already be the redundant OD.
    3) How fast does the MDC FC connection need to be? If my clients are all on 4/8gb x2 connections, can I run my MDCs on 2gb? or single 4gb? My understanding is they are generally just accessing the metadata LUN, in which case, that LUN itself is the bottle neck to performance.
    Thanks in advanced for all your help.

    Speaking metadata, I suggest you look into this: http://www.getactivestorage.com/pr041210-1.php
    Active is onto something here and this answers a huge problem when scaling a SAN. Now your storage arrays can all use the max number of drives per box.
    As for your other questions:
    1: CPU is not a huge deal but do things right. Get an MDC and an MDB and let them do just SAN control. Scale your RAM needs to allow for 4 GB of RAM per SAN volume if you are doing AD permissions and (gasp) Spotlight. Thus, if you have one ingest volume and one work volume, have 8 GB of RAM + another 4 for the OS. More is better. Don't expect to use the devices as cluster nodes either. Leave the processing elsewhere.
    2: Using server is recommended and the official way to do it. If you already have an OD Master, then just connect the MDC and MDB to the domain. They do not need to be replicas.
    Just my two cents. Enjoy Xsan.

  • New User Guide (common questions)

    Common Ipod Info
    For those who just go an ipod here is some basic info on the ipod and how to do a few things.
    Basic Info
    Disconnecting/Connecting
    Just plug in via USB and wait (can take a few minutes). Ipod will load up and the screen will show DO NOT DISCONNECT go to itunes and update it or add file do whatever to it.
    TO DISCCONECT do not unplug if the screen says do not disconnect. Instead you have two options.
    1.) In itunes right next to where it says NAME’s IPOD (in the source window) there is a small eject button. Or you can highlight you ipod and in the bottom right there is a bigger eject ipod button.
    2.) Open my computer and you should see your ipod as a removable drive. Right click it and click eject.
    Ipod’s do not actually hold 30gigs or 60gigs. In stead the 30gig holds ~28gigs. This is the same as hard drives something about 1024 bytes. Look it up via google if you really care. This is normal.
    Multiple IPod
    If you are sharing one computer with 2 or more iPod but do not want all the music and want only yours here is what you should do.
    1.) Open I tunes
    2.) Create a new play list (file->new play list) and name it something like Moo’s play list (so you know it is yours)
    3.) Add the music you want to it (go to library and drag it to you play list.)
    4.) Now plug in the ipod and go to edit>preferences>ipod
    5.) Select update only selected play lists and check your play list.
    6.) Wait for it to update and unplug and redo with second ipod
    Getting Video’s to Ipod
    WINDOWS ONLY
    Two options that I use. For both the first step if getting form DVD is to save the DVD to your computer (caution DVD’s are huge! Have 10gigs for one movie to be safe.) You must have a DVD drive to do DVD’s. CD-ROMs will not work. If you don’t have a DVD drive you can get one for like 20 bucks.
    First off the Videora method. Read this guide.
    http://www.videora.com/en-us/Converter/guides.html
    macleankara’s guide (a little bit more info and pretty simple too) http://discussions.apple.com/thread.jspa?threadID=282835&tstart=15
    Second is the Nero Recode method and you should read this guide
    http://arstechnica.com/guides/tweaks/ipod-video.ars/5
    I prefer Nero why because I paid for it and it’s a bonus feature I’m using by golly!
    It won’t show up on my ipod! (Music and video)
    Make sure it is in the correct format.
    Video’s h.264 and mpeg-4 at 320x240 Also make sure the bit rate is at the appropriate level (another reason for videora its simple and auto in right bit rate) Make sure the screen is set to 320x240 or it wont play. Mpeg-4 can show up to 480x480 but the ipod’s screen is maxed at 320x240 so it will be shrunk down with black border on all sides.
    Music just makes them into mp3’s
    As for the battery read this from apple
    http://docs.info.apple.com/article.html?artnum=61434
    hope this helps some people. and hopefully will reduce redundant questions

    willertel wrote:
    I would like to set up a speed dial number that dials my office and enters the mailbox/password after the voicemail kicks in.  The speed dial I am trying to set up is for my office - not the Blackberry.... I only see ways to add existing contacts (with no appendages) to a speed dial button.....
    I don't know what you mean by "appendages".
    You can create a contact which phone number will contain a pause, then continues other numbers, and then wait for a click from you, and then continue again.
    from the home screen :
    phone application >> menu >> help >> Phone basics >> Make a call >> Related tasks >> Add a pause or a wait to a phone number
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • New user w/dashboard question

    Hi, I'm brand new to Apple computers so I apologize if I'm a little slow with some of the stuff. I just purchased a G4 with the Tiger X v10.4 and can't locate the dashboard. Am I missing something or does it not come with the computer?

    To access the Dashboard, click the icon which is
    second from the left in the Dock or press the F12
    key.
    (16109)
    I don't even have the dashboard icon...can I download dashboard?

  • New user Union efficiency question.

    I have feeling I read this some where but can no longer seem to find any information on the following:
    Which is more efficent to the following with Physical tables A and B
    SELECT * FROM (A union B) WHERE ID < 97 AND ID > 103
    or
    SELECT * FROM A WHERE ID < 97 AND ID > 103 UNION SELECT * FROM B WHERE ID < 97 AND ID > 103.
    And more to the point how would I test / profile this ?
    Thanks
    Mark

    Silly me it was a threoretical question in as much as the code I'm trying to maintain is a little more complex and the records in both tables whilst being the same do not have contiguous ID values.
    I found an article on materialized views at http://www.akadia.com/services/ora_materialized_views.html and used set autotrace on and timing on and found that after creating two copies of the same table both gave the same performance. ( with corrected Id values of course ;-))
    Thanks ever so much and Regards
    Mark.

  • New user - perhaps silly question

    Hi there,
    We just bought our first Ipod Classic 80 GB and we want to put all our old CD´s approx: 300 on it. Now my question is: Is it neccesary to store them all in the Itunes library. I cant seem to delete them as have stored them on the Ipod. We have a rather old PC - And I think that I will kill it with all those GB stored.
    Can anyone pls help ?
    Thanks in advance.

    If you want to delete songs from iTunes and keep them on the iPod you need to change the update option of your iPod to "manually manage music and videos". Your iPod will not sync with iTunes in this mode so it can have different content, you can get details here:
    Managing content manually on iPod
    iPod 101: Fill 'er Up
    One major word of caution. If you delete songs or videos from your computer and have no back up other than the iPod you will risk losing them permanently if your iPod fails or you find you have to restore it to solve a problem. You should consider investing in an additional internal or external hard drive to store/back up your music. Alternatively at the very least back up anything you can't replace such as iTunes downloads to CD or DVD: How to back up your media in iTunes
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

  • New user with elementary question

    Im just beginning to use dreamweaver. I began using a page
    design (css) sheet, and there is a blue-grayish color gradient on
    the page. I think its an image being used as my background color
    (bg.grad) . Ive been trying to change that color with no success. I
    like the design and the gradient, but cant change the color. I
    triend beginning over with a new desing, and using the color i
    want, but now i cant get the gradient.
    HELP

    Show us the page, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Chicagochillin" <[email protected]> wrote
    in message
    news:eqar2v$q8p$[email protected]..
    > Im just beginning to use dreamweaver. I began using a
    page design (css)
    > sheet,
    > and there is a blue-grayish color gradient on the page.
    I think its an
    > image
    > being used as my background color (bg.grad) . Ive been
    trying to change
    > that
    > color with no success. I like the design and the
    gradient, but cant change
    > the
    > color. I triend beginning over with a new desing, and
    using the color i
    > want,
    > but now i cant get the gradient.
    >
    > HELP
    >

  • New user - setup help!!

    Hi,
    Just put together the system below, didn't yet plug in any of the back panel extras.  Memory in 1st purple slot (of purple, purple, green), CD on Primary master - top yellow IDE controller (IDE2?)
    Evertyhing seems fine on swithch-on, leave the BIOS alone (except boot from CD), then config the SATA BIOS.
    CD boots (Win XP Pro - no SPs). And the problems start - I get no response from pressing the f6 key (changed keyboads - no luck), then it freezes a bit later in, before it gets to the setup.
    Anyone have any ideas, it's driving me mad!!
    Thanks,
    Andy

    thats no problem
    had a great few days up there a few years back after we nicked a draw of ya at the valley with my eldest two boys
    great fun in the corner singing we made kegan quit at ya
    untill that xxxxer  shearer took a late free kick as i recall
    it was also the night they introduced kenny to ya
    every one was great to us
    i like jimmy nail as well

  • New user with a question..plz help

    I have a MSI ms-6390 and i can not figure out on how to use my Vipper V770 agp card to work..i am curertly using the on board video..i went to bios and disabled the vga share memory size and when i restart it..both my onboard and my agp video card do not work..please help

    I'd look further into your BIOS settings.
    I am not familiar with that BIOs so I'm speculating. There is no need to disable the Memory share for starters.
    It sould disable it automatically..I could be wrong here.
    There should be a setting that will allow you to choose initialization settings. Something like "Integrated Peripherals" Under that setting there should be a setting "Init Display First"
    AGP should be selected. You may have to play with these settings...That is if you can see your BIOS sisnce you claim that now both don't work.
    Also try reseating Your Memory, you may have jostled it loose while you were in the case.

Maybe you are looking for