Venture details error

hi friends,
i get an error "Venture details cannot be derived from line 00001 i have recently changed the tranasction type and tested by uploading the bank statement and the posting were not done coz of this problem.
can any one suggest me the solution.
thanks
cheers
charlie

Hi Eli,
Thank you for the update!
Do you have any example for this, i mean how to define rules for Joint venture details under WBS Element.
Thanks and Regards,
Ashok.

Similar Messages

VENTURE DETAILS NOT DERIVED FROM 0001

while posting through F-43 a vendor getting credited and a bank commission a/c (balance sheet a/c) getting debited where after simulating and posting the document at the time of saving it is showing ' VENTURE DETAILS NOT DERIVED FROM 0001'. Is it due to that G/L is not defined in Balance sheet adjustment A/c group. there is no WBS only a cost object is entered in line item of Vendor. Pls reply

Is it error?
When you have error, always post the message number

SSIS - Getting the detailed error message from a FTP Task

Greetings all,
I'm working on a SSIS package that pulls a file down from an FTP server, then has its way with it.
Under expected conditions, everything is working perfectly. However, I never want to download the same file twice. In order to enforce this, I just set the OverWriteFileAtDest option to false. Obviously, if the file has already been brought over, the package
fails. This is the intended functionality.
However, in such a case I want to handle the error separately. Now, when I setup a EventHandler to deal with it, the error message that's passed over is:
"Error: An error occurred in the requested FTP operation"
Oh joy. Ambiguity at its finest. However, the detailed description is:
"Receiving file "/server/folder/file.XLS". File "\\server\folder\file.XLS" already exists.
Try as I might, I can't seem to capture the detailed error message so that I can act on it. I'm looking for a way to capture this info, pass it to an expression, and then handle it from there.
Thanks!

Did you try enabling logging for the package and capturing it in SQL table which case you should get error messages in sysssislog table
http://msdn.microsoft.com/en-IN/library/ms186984(v=sql.110).aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Failed to send invitation emails to recipients. detailed error: an error occurred while sending mail.

I tried to send a distributed form out to myself to check the system and received this error message: failed to send invitation emails to recipients. detailed error: an error occurred while sending mail. Any idea what I may have done wrong? I am using Microsoft Outlook 2010 with Windows 8.1 OS.

I think century link did change some settings though.
Help menu (Alt+H) > troubleshooting information. Copy to clipboard and paste into a reply here. Then I can see what setting your using with century link and compare them to what century link provide.

How to get more detailed error information when calling Java SP

Hi
Sorry for reposting this in here but I got no responses in the JVM forum...
I am calling a Java stored procedure from a PL/SQL stored procedure (Oracle DB 9.2.0.8.0) and I am getting the exception:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.NullPointerException
It does not help much though... Is it possible to get the full Java error stack from within PL/SQL so I can log a more informative message?
Thanks!
Luis

Thanks for the replies! However I am not sure if they help...
I will give some more info about my problem. I have an Oracle job that runs every morning and executes a PL/SQL procedure, which in turn calls that Java SP.
Sometimes the Java SP fails and the error is logged; however only the message "java.lang.NullPointerException" is reported by the SQLERRM function (apparently the last Java error message in the error stack). I am unable to reproduce the error when calling the Java SP manually as was suggested.
I need to log a more detailed error message from within PL/SQL to know exactly where the error occurred, when it occurs next time...
I will take a look to see if I can get some information in some trace file, though ideally I would like to do it programatically.
Thanks
Luis

How to deleted stalled operations with a detail error "Action Id: NNNN not found"?

I have stalled operations with a detail error "Action Id: 522248 not found." The id number is different for each process. Every attempt to terminate the operation ends with several errors at the log and the process continues in the stalled operation page. I cannot include all the errors, but here are some of the errors
2010-07-27 10:23:51,679 ERROR [org.jboss.ejb.plugins.LogInterceptor] TransactionRolledbackLocalException in method: public abstract void com.adobe.workflow.engine.ProcessEngineCMTLocal.terminateAction(com.adobe.workflow.boi.BO IActionInstance,com.adobe.workflow.engine.PEMsgContext,com.adobe.idp.Context) throws com.adobe.workflow.manager.ProcessManagerException, causedBy:
2010-07-27 10:23:51,679 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract void com.adobe.workflow.engine.ProcessEngineBMTLocal.asyncTerminateActionCommand(com.adobe.wor kflow.engine.PETerminateActionCommand,com.adobe.idp.Context):
2010-07-27 10:23:51,695 ERROR [org.jboss.ejb.plugins.LogInterceptor] TransactionRolledbackLocalException in method: public abstract void javax.jms.MessageListener.onMessage(javax.jms.Message), causedBy:
2010-07-27 10:23:51,804 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract void com.adobe.workflow.engine.ProcessEngineBMTLocal.asyncTerminateActionCommand(com.adobe.wor kflow.engine.PETerminateActionCommand,com.adobe.idp.Context):

I have stalled operations with a detail error "Action Id: 522248 not found." The id number is different for each process. Every attempt to terminate the operation ends with several errors at the log and the process continues in the stalled operation page. I cannot include all the errors, but here are some of the errors
2010-07-27 10:23:51,679 ERROR [org.jboss.ejb.plugins.LogInterceptor] TransactionRolledbackLocalException in method: public abstract void com.adobe.workflow.engine.ProcessEngineCMTLocal.terminateAction(com.adobe.workflow.boi.BO IActionInstance,com.adobe.workflow.engine.PEMsgContext,com.adobe.idp.Context) throws com.adobe.workflow.manager.ProcessManagerException, causedBy:
2010-07-27 10:23:51,679 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract void com.adobe.workflow.engine.ProcessEngineBMTLocal.asyncTerminateActionCommand(com.adobe.wor kflow.engine.PETerminateActionCommand,com.adobe.idp.Context):
2010-07-27 10:23:51,695 ERROR [org.jboss.ejb.plugins.LogInterceptor] TransactionRolledbackLocalException in method: public abstract void javax.jms.MessageListener.onMessage(javax.jms.Message), causedBy:
2010-07-27 10:23:51,804 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract void com.adobe.workflow.engine.ProcessEngineBMTLocal.asyncTerminateActionCommand(com.adobe.wor kflow.engine.PETerminateActionCommand,com.adobe.idp.Context):

SXMB_MONI detailed error message in XML how can be it retrive .

Hi Guys/SAP,
Iam creating a Zee report for my client to capture all my detail error message which is Display in SXMB_MONI
Error Tab in XML formt .How can i capture this and how it is stroed in SAP.Please kindly let me know.Iam also alalyais this issue for the past 4 days but iam not able to find out where it is stored.If any one come accross this issue or know kindly let me know .Iam expecting few tips from SAP also .Iam also exploring more on this .
The below detilas of error message in SXMB_MONI is required,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Test_SenderJDBC_ReceiverFILE_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Test_SenderJDBC_ReceiverFILE_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Sri

Hello Sri
See the link below:
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
You can use the container variables to output the error information from the message in sxmb_moni.
Regards
Mark

Detailed error message in sxmb_moni

Hi guys,
is it possible to get detailed error information in sxmb_moni like the error information in the integration repository when using the test tag
sample error message in test tab
+ns0:ZMOZPRUCK_envelope_update/ns0:ZMOZZFZT_update[4]/ns0:dbTableName/ns0:access/ns0:SPRAS.+
in sxmb_moni the error message is truncated
sample
+During mapping com/sap/xi/tf/_JDBC_ZPRUCK_2_ZMOZPRUCK_envelope_u~ a RuntimeException occurred. com.sap.aii.utilxi.misc.api.BaseRuntimeException:RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:ZMOZPRUCK_en~</+
This will save myself for copy/paste the payload in the test tab. In case of big message the Java GUI of the ESR lacks and it is impossible to test the mapping with such big messages.
any suggestions on that?
Thanks

Gugel,
Check this thread and the blog:
level of trace
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Usually 1 should be good in prod.
Regards,
---Satish

An error occurred in the requested FTP operation. Detailed error description: The password was not allowed

Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
   ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A     Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71     Code: 0xC002918F     Source: FTP Task FTP Task     Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoft

Hi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
ERROR
Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
STEPS
The issue can be reproduced at will with the following steps:
1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
2) Created dnd.param file in SIebel server SDQCOnnector folder.
3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
6) Configured the Siebel components for EDQ integration.
7) Realtime EDQ jobs are running.
8) Create a new Account
Env details are
On : 8.2.2.14 [IP2014] version, Client Functionality
EDQ 11.1.1.7.4
IBM JDK 1.7 32 bit
Using Open UI
Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
Regards
Monoj Dey
9007554589

Hi Monoj,
A few questions:
- What OS is Siebel running on?
- What version of the Siebel connector are you using?
- Which libdnd.so file are you using?
- What's the contents of your dnd.parms file?
thanks,
Nick

Validation on 7.31 AAE HTTP adapter does not deliver detailed error

Dear all,
I am working with a synchronous HTTP <-> PI <-> RFC on PI 7.31.
In the scenario I am using the validation by adapter option.
When I am using the HTTP adapter and classic configuration, in case of invalid payload being sent I am receiving back a clear error from the parser:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <Error>
- <Details>
- <![CDATA[
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>XML_VALIDATION_INB.CX_XMS_SYSERR_VALIDATION</SAP:Code><SAP:P1>com.sap.aii.utilxi.xmlvalidation.impl.XMLValidationException: XML Validation for payload with root element name message_root , target namespace http://www.root.net Failed!Errors Encountered During Parsing
1.cvc-enumeration-valid: Value 'fufu' is not facet-valid with respect to enumeration '[TECL, STRD]'. It must be a value from the enumeration.
2.cvc-type.3.1.3: The value 'fufu' of element 'RapidPriority' is not valid.
</SAP:P1><SAP:P2>XML Validation for payload with root element name message_root , target namespace http://www.root.net Failed!Errors Encountered During Parsing
1.cvc-enumeration-valid: Value 'fufu' is not facet-valid with respect to enumeration '[TECL, STRD]'. It must be a value from the enumeration.
2.cvc-type.3.1.3: The value 'fufu' of element 'RapidPriority' is not valid.
</SAP:P2><SAP:P3>Schema Not Available in Cache, try to validation with file system schemas. Validation With File System schemas also Failed. XML Validation for payload with root element name message_root , target namespace http://www.root.net Failed!Errors Encountered During Parsing
1.cvc-enumeration-valid: Value 'fufu' is not facet-valid with respect to enumeration '[TECL, STRD]'. It must be a value from the enumeration.
2.cvc-type.3.1.3: The value 'fufu' of element 'RapidPriority' is not valid.
</SAP:P3><SAP:AdditionalText>not used at the moment.</SAP:AdditionalText><SAP:Stack>System error occurred during XML validation</SAP:Stack></SAP:Error>
]]>
</Details>
</Error>
After changing the scenario to integrated configuration using the HTTP AAE adapter, I am receiving a response to the same error in such a way:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <Error>
- <Details>
- <![CDATA[
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
 td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
 A:link {color : #0059AA;}
 A:visited {color : #999999;}
 A:active {color : #999999;}
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
 <tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 500 Internal Server Error</td>
 </tr>
 <tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP NetWeaver Application Server </td>
 </tr>
 <tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
 </tr>
</table>
 
 Error: ERROR_IN_MODULECHAIN;ERROR_IN_MODULECHAIN, senderChannel '2da99c2347883de1901ec9bd42dbf208': Catching exception calling messaging system
 <a href="https://wiki.sdn.sap.com/wiki/x/wIN3Cw">SAP Technology Troubleshooting Guide</a>
<table>
 <tr>
 <td valign="top"> Details:</td>
 <td valign="top"><PRE>No details available.</PRE></td>
 </tr>
</table>
</body>
</html>
]]>
</Details>
</Error>
As you can see after changing to HTTP AAE I am not receiving a clear parser error back. Instead a generic internal server error is being thrown.
This is a disadvantage for the Sender who does not know which part of his message was in error.
Maybe somebody can give me a hint how to get back the parser message on the HTTP AAE adapter instead of the generic message.

Thank you for your responses!
Yes I am sure that the application is working in the same way on both configurations. Only the response message differs (detailed validation error message vs. generic HTTP 500 message).
In both cases I have activated the "Validation by Adapter" option in ICO and Sender agreement and the validation of the request message is failing (I am sending an invalid enum value). If I send a correct request message, it is being processed fine on both configurations.
In fact if we check the PI logs in NWA, we can also find the detailed validation error for the HTTP_AAE adapter, it is just not sent out with the response message.
It is contained in the following log location:
Category:
/Applications/ExchangeInfrastructure
Location:
com.sap.aii.utilxi.xmlvalidation.impl.XMLSyntaxValidatorImpl
Application:
sap.com/com.sap.aii.af.app

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

Getting detailed error

I have registered a schema in the XMLDB repository and now I'm loading in an INVALID xml file (in a date element I have entered a string).
I use the following code to check the xml file:
v_xml:= XMLTYPE.createXML(l_clob);
DBMS_LOB.freetemporary (l_clob);
v_xml.schemaValidate();
COMMIT;
EXCEPTION -- exception handlers begin
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(substr(SQLERRM, 1, 500));
END;
I expect the error would give me something like: "error on the birthdate element: is not date". So I expect that it gives a detailed error from which element is wrong in my xml file, but I only get the following error: "ORA-01858: a non-numeric character was found where a numeric was expected"
What do I have to do to get a more detailed error message?

Which release are you using...
We are trying to improve the error messages so that we will give you an XPath that points to the location of the offending item. This is on ongoing effort, that started in 10gr1 and was improved in 10gR2 but it is still a work in progress. Unfortuantely today, even in 10gR2 there are still some cases where we do not provide the infromation required to what in the document is causing the problem.

Hide details error

Hi,
I need hide the details error in the page error of Portal (500 - Internal Server Error) but for all applications of Portal (WD, BEx...)
Any one?
Thanks
Lucas

Hi,
check this note:
Note 795699 - Customizing default error messages for
It explains how to change differentes error pages in Portal.
regards,

Venture details error

Similar Messages

Maybe you are looking for