Verizon email; Thunderbird client; Not working since 3/25/2013;server name change

Yesterday, 3/25/2013, I noticed that email wasn't working from my thunderbird client. After a day of assuming that the problem existed elsewhere, I found on this site where it says to use POP.VERIZON.NET, port 995, and SMTP.VERIZON.NET, port 465.  After grumbling why didn't I hear about this name change?, I changed them. At that time I noticed that the PORTS were wrong, too.  They'd been right, and now, not.  Most confusing.  I changed them.  Each account has CONNECTION SECURITY SSL/TLS and NORMAL PASSWORD.
But: when I try to connect, I get:  An error occurred during a connection to pop.verizon.net:995.  You have received an invalid certificate.....Your certificate contains the same serial number as another certificate issued by the certificate authority.  Please get a new certificate...."
I am at a loss.  What's wrong, other than that email seems to be choking on security?
Solved!
Go to Solution.

Found in another post where a person said the INCOMING.VERIZON.NET and OUTGOING.VERIZON.NET did still work, so I tried it, but still got that Certificate error.  Found someone else who said they had to say 'no connection security' before it would work, and so I tried that -- and it did.
Not thrilled about this, but the client is working again.  

Similar Messages

  • TS3899 Push email from AOL not working since IOS7.1 update?

    As usual updated all idevices once notification received, only problem is my AOL email no longer pushes the data and I no longer receive notifications of new mail until it is "fetched" either by a timed fetch or by opening the mail app.
    This applies to all my devices iPad Air, iPhone 5s and iPad mini.
    Annoying!
    Tried resetting the account and playing with the push and fetch settings, currently set to push with fetch set to 15 minutes.

    AOL still not working, but reading the comments looks like the finger of blame is pointing towards AOL and probably just a coincedence it happened around the same time as the IOS7.1.1 update.
    So far I have had to put up with cancelling the push option and relying upon a fetch scheduled for every 15mins. will have to see how that goes.
    Anyone contacted AOL?

  • Do not disturb feature does not work since 1st JAN 2013

    Following settings are done
    1. Do Not Disturb is Enabled (ON) and hence a moon icon is visible in Status Bar.
    2. In Notification, Sort App: By Time is selected.
    3. Scheduled is Enabled and time range is set between 10pm to 7am.
    4. Allow Calls from: Favorites is selected.
    5. Repeated calls is turned ON.
    With the above settings, the features was working fine till 31 DEC 2012. 1st Jan 2013, morning 11am I saw, the moon icon was displayed in the status bar. I checked the settings of Do not disturb, there was no change in settings.
    Please suggest what's gone wrong. Why this is not working.
    Thanks.

    Check this out
    http://support.apple.com/kb/TS4510

  • I recently moved to new location and Thunderbird has not worked since although Verizon Email is working. How do I fix this.

    How do I troubleshoot this?

    It wasn't the capital 'S' I was concerned with, it was the transposition: you had 'smpt' and it should be 'smtp' (stands for Simple Mail Transport Protocol). For sending you could also try port 587 instead of 465.
    "pop.verizon.net' is probably correct.
    Have you called Verizon? Their tech support has always been very helpful to me. Ask them about all of your settings.

  • Aperture email sharing (Outlook) not working since upgrade to mountain lion

    Just upgraded to Mountain Lion and sharing of photos via email no longer works.  I've seen posts of problems with Apple mail; but not sure if others are having this issue with outlook.  When I choose 1 or multtiple photos to share vioa email; it goes through an export process, Outlook dialogue email opens, but NO attachements or files embedded. 
    This worked fine before upgrade; others experienced or have solution?  I can certainly send photos the "old fashioned" way; but at 10mb a photo, not practical.  Very frustrating.

    I have found it. It seems that in Lion we had to convert the filename from Mac native to Posix format, in mountain lion this is no longer necessary. If you want to modify the script here are the instructions:
    Finder->Applications. Right click on Aperture and choose "Open package contents"
    Contents->Plugins. Open "Microsoft Outlook.applescript" (with the applescript editor)
    You should see the following 3 lines:
    -- convert the image path from UNIX to Mac
    set this_imagefile_path to (POSIX file this_imagefile) as string
    make new attachment at new_message with properties {file:(this_imagefile_path)}
    these should be replaced with this line:
    make new attachment at new_message with properties {file:(this_imagefile)}
    You are not allow to directly edit this file so save a duplicate somewhere.
    Rename the original script file.
    Copy the modified file to the Contents->Plugins folder of the package. It has to be called "Microsoft Outlook.applescript"
    You will probably be asked for your password a number of times.

  • 'Fetch' email slow or not working since os4 upgraded

    Having upgraded to the new iphone os4, I have had issues regarding 'fetch' email messages. Simply, I have "fetch' enabled for three email accounts set to 'every 15 mins' but I only get new emails when I go into email and iphone checks for new mail. Eg. I had a colleague send me a message at 14.54 but I manually checked my email at 17.05 and the message only then came through.
    It should have 'fetched' that mail very soon after it was sent and left a red number 1 showing on the mail icon. Did it again later the same day..
    Btw my phone also decided to shut down twice during a phone call at the weekend.
    I use my phone for getting important client mail when I'm out and about so could miss important/urgent info or job requests..
    Anyone had same?
    Is there a fix?
    cheers

    I had a similar problem, as I wasn't receiving any new emails on my IP4. I would receive new emails at home on my MBP, but not on the iPhone.
    My fix was on the MBP.
    Go to Mail/Preferences/Accounts/Advanced and uncheck the box that states "Remove copy from server after retrieving a message".
    This now allows new emails to be seen at home on my MBP, on my iPhone and on my IPS's email server.
    Hope this helps with your problem.

  • Resolution in Live Meeting with Global Client not working since new laptop purchased- SONY VAIO

    Live Meeting

    To be honest, you should have received it upon purchase. You should have no issues returning to get it added on.
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • My morphie pack does not work since upgrading

    My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
    I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
    This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
    Someone come back to us and give us a solution please.
    Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

    3l3na t wrote:
    Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
    I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
    Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
    Full phone restore was done too.
    Still not HAPPY
    Sorry, as already stated your using a 3rd party accessory take it up with mophie.
    I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
    My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • Where can i exchange my not working iphone bought in Switzerland (on july 12, 2012.) that just turned off and not working since. In croatian store they don't want to give me replacement phone!!!!

    I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support

    “the EU is considered one country for warranty purposes“
    Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
    Some how you need to get your phone back to Switzerland.

  • HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    You just need to update it to the latest version.  See:
    http://kb.parallels.com/114449

  • Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb.  Any suggestions?  Thanks. LL

    My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB.  Have had no previous issues with printing, scanning or faxing.  When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the  on my MAC which shows the same problem.  All of the color and black cartridges are new.
    The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
    Any suggestions?  Could this simply be a compatibility problem?  I'd sure like to keep my Canon printer.
    Thanks,  LL

    Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
    Also an FYI - this is the Mavericks forum. The Yosemite forum is here

  • IChat Video Not Working since PSP3 bought!!

    Hi guys,
    ichat video not working since I bought and installed a new Playstation 3. I have a BT HUB that connects wirelessly with the imac. I have BT Vision running from the HUB too via ethernet wall boost adapters. I had this problem with video when i installed the BT Vision. And turned out to be something to do with Application Sharing settings on the HUB. I resolved it by correctly sharing AIM TALK with my wireless imac. Now the same problem has arisen since the psp3 was put on. But even with all the things I've tried I am stuck as how to get the video up and running as before. The devices running off the hub include:
    1. imac (wireless via Airport Extreme)
    2. BT Vision via ethernet and wall adaptors
    3. iPod touch via wireless
    4. PSP3 via wireless plug and play
    I have checked all the ip address for these devices and have enabled app sharing for the imac wireless to AIM TALK in BT HUB manager. I have also opened my firewalls; changed the port setting to 443 in ichat preferences; re-set the HUB/Router;
    Is there anything else I can do or check? As I said it worked perfectly before the psp3 went onto the
    network. Should i assign AIM TALK to the imac wireless or to some of the other devices? (though I think I've tried that too!!)
    Help would be much appreciated as this is driving me to insanity, if I wasn't there already!!!!
    Take care, and thanks in advance for your help.
    Baz, Belfast, Northern Ireland, Europe!!

    "speedtouch modem!"
    Yes you do.
    Thomson-Alcetel who make the Speedtouch range make this device for BT.
    The Firmware is Thomson-Alcatels with BT Logo-ing.
    This Ethernet 3 connection is probably internal.
    Have you got System Preferences > Quicktime > Streaming set to 1.5Mbps ?
    If not then do and restart iChat to see the new speed.
    In Leopard the Automatic setting is read by iChat as 384K.
    This may be allowing the PS3 to have too much of the bandwidth.
    I or rather my son has a X-Box 360 which can be on-line when I video chat and it works for me, as it does when he uses his PlayStation 3
    If the AIM talk setting uses the same port here as it is listed elsewhere then it has only opened/allowed port 5190.
    This would have appeared to have been coincidental to any iChat use when you changed it.
    Are you not using UPnP in this device ?
    Which firmware is it up to ?
    Anything above 6.2.2.6 should work.
    Anything starting with 6 and containing letters is later.
    In the .telephony section does it mention which port are open ?
    9:00 PM Sunday; May 11, 2008

  • I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    Here's basic troubleshooting for iOS:
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
    (Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

  • Home sharing on apple tv not working since upgrade to yosimite

    home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
    everything worked fine before this!

    Hey stephenfromdominion,
    Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks,
    Matt M.

Maybe you are looking for

  • Query Error - Schema Does Not Exist

    I get the following error when creating stored procedure: Msg 2797, Level 16, State 1, Procedure SearchAllTables, Line 90 The default schema does not exist. CREATE PROC SearchAllTables @SearchStr nvarchar(100) AS BEGIN CREATE TABLE #Results(TableName

  • How can i get on my iMAC read access to BPF devices in /dev/bpf*

    Ls. How can i get/change on my iMAC read access to BPF devices in /dev/bpf* I want to use Wireshark. Thanks in advance. Loekie.

  • Queries from TADIR

    Hi, It might be a very simple thing. In the table TADIR, how do I differentiate which are queries only. Kindly help. Warm Regards Navnita

  • MacBook Pro and Aperture

    I Installed Aperture on my new MacBook Pro, I'm new to Apple the MacBook Pro being my first Apple computer, after installing I upgraded the software. I tried to run the application and received an error saying something to the effect of, "This applic

  • Adobe Desktop Application no longer loads after failing to install After Effects CC

    Hi, I just tried to install After Effects from the Desktop Application and it failed. Not only that, the application crashed and won't load anymore. I tried a reboot and it didn't do anything. I can see the process "Creative Cloud" in Activity Monito