Version of SAP 4.7 Enterprise extension set

Dear all,
How can I get the version of my SAP 4.7 enterprise extension set?
Best regards.
Nozome.

Hi Nozome,
Goto System - > Status
On block "SAP System DATA" click on components .
Here you will see software components SAP_BASIS SAP_ABA.
Just see the release of EA-APPL. The release will be your extension set. It will be either 110(1.1) or 200(2) . I guess this is what you are looking for.
Cheers

Similar Messages

What's the difference between R/3 Enterprise extension set 1.10 and 2.00 ?

Hi there,
Anyone know how to find the difference between 47x110 and 47x200. I want to install the new IDES R3 which is 47x200 (I found some program/source that I need in this version). But our PRD system is 47x110.
thanks in advance,
Doris

Hi Doris
SAP R/3 Enterprise Core has been assigned the release number
4.70. This signifies its similarity to SAP R/3 4.6C and indicates
that the core can be independently upgraded and maintained.
SAP R/3 Enterprise Extensions are selectively deployable and
have their own release cycles. The name of each SAP R/3 Enterprise Extension reflects its relevant application area.
e.g.
SAP R/3 Enterprise Extension Set 1.10 includes HR,SCM and Fin modules
SAP R/3 Enterprise Extension Set 2.00 includes all above and additionaly PLM module.
Award points if Helpful
Regards
Umesh

Enterprise Extension Set 110 to 200

What is involved in implementing Enterprise Extension Set 2.00 on a 110? Is this an upgrade? Is it supported?

Hi all,
but 4.7 Ext Set 2.00 is to my knowledge supported to the SAME day only (march 31st , 2009)
=> I don't see any sense in the upgrade of this way - even when supported.
You should buy the new license and go to ECC 6.0 or wait until this has happened.
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarket

DIFFERENCE BETWEEN SAP ERP 47 EXTENSION SET 110 AND 200.

HELOO TO ALL SAP MASTERS
IS THERE ANY SIGNIFICANCE DIFFERENCE BETWEEN SAP ERP 47 EXTENSION SET 110 AND 200.
IF YES WHAT ARE THE DIFFERENCES.
THANKS IN ADVACE
RAFIQ

Hi
Basic difference between the two:
47x110 first enterprise release.
From a technical point of view, the first SAP R/3 Enterprise release 47x110,
consists of following parts, each containing different software components:
    o The SAP R/3 Enterprise Extension Set 1.10 consists of the
       following software components: EA-HR 110, EA-APPL 110, EA-IPPE
       110, EA-RETAIL 110, EA-GLTRADE 110, EA-PS 110 und EA-FINSERV 110.
From a technical point of view, SAP R/3 Enterprise 47x200 consists of
following sections, which in turn contain various software components:
    o SAP R/3 Enterprise Extension Set 2.00 consists of the following
       software components EA-HR 200, EA-APPL 200, EA-IPPE 200,
       EA-RETAIL 200, EA-GLTRADE 200, EA-PS 200, EA-FINSERV 200, EA-DFPS
       200 and ABA_PLUS 100.
Hope this helps.

Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00

Hello,
We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
As we checked we have activate the extension set:
EA-FIN: Financials Extension
EA-FS: Financial Services
According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
In the other OSS note 858966 mentions the following conditions to start points migration:
1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 1.10 or earlier.
2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 2.00 or higher.
Do you know a transaction o report Sap which provides this information?
Thank in advance.
Sergio

Within SAP, select System -> Status... In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information. It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN. The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
Regards,
Shannon

SAP 3D Visual Enterprise Side Panel not displaying JT file

We are trying to use the SAP 3D Visual Enterprise Side Panel from transaction CV03N. The Side Panel display. However, all of the various sections of the Side Panel are empty. Any suggestions of how to resolve this problem would be appreciated.
We traced the interaction between the browser and the server using Fiddler. We can see a web service call going out to sap/bc/nwbc/nwbc_ext2int. When we look at the calling parameters (see below), only the Document Number (DOKNR) field is being passed. Shouldn't the Document Type, Document Part, and Document Version be part of the call?

Hi Steven,
I don't know what version of SAP 3D Visual Enterprise Viewer being used, however please can you make sure you are using the most up to date version and patch level available via the SAP Service Marketplace and reassess the issue above again thanks. If this does not resolve I would advise you to create an Incident in the SAP Support Portal under component CA-VE-VWR (Embedded Viewer)
Kind regards,
VE Support Team

How to find out the extension set version in R/3 Enteprise.

Hi all
I have an SAP system with kernel 640 and Basis and abap and other SPs at version 620.
I am trying to install Auto id infrastructure. I have the following questions.
1. With kernel level 640 should i take my system as R/3 4.7 or ECC5.0?
2. How do i find the extension set version (2.00 or 1.10) of my R/3 4.7 system?
Thanks in advance:)
Regards,
Hari

Hi hari,
Ofcourse your system is a R/3 4.7 System and as it is running on 620 stack hence the extension set is 1.10.
for extension set 2.00 the stack level will be 630.
The same can be confirmed at
http://help.sap.com/content/documentation/r3/docu_sbs_r3_470.htm
Please note the following:-
a) SAP R/3 Enterprise Release 4.70 SR1
SAP Technology Components Release 6.20
Extension Set 1.10
b) SAP R/3 and R/3 Enterprise 4.70 SR1
SAP Web Application Server 6.30
Extension Set 2.0
Please update the thread status and reward the useful posts!
Regards,
Prem

SAP R/3 ENTERPRISE 47X200 IDES Version - Download Titles

Hi
Could any one please list out all required Download Titles for SAP R/3 ENTERPRISE 47X200 IDES Version.
Operating System : Microsoft Windows Server 2003 Enterprise Edition with SP1
RDBMS : Oracle 9.0
Will appreciate install instructions as well . (e-mail : [email protected])
Thanks in Advance
Veeresh Babu

cds you'll need...
- Oracle 9.2 NT 1/3 - Oracle 9.2 NT 3/3 (or appropriate DVDs)
- Oracle 9.2 Patch Set 7 WIN I386 32Bit/64bit
- DVD IDES SAP R3E 4.7x2.00 SR1 Export (4) 1 of 16 - 16 of 16
- Installation Master 6.20/6.40 Windows Server on IA32 32bit/64bit
- CD 6.40 Kernel ORACLE A,L,NT,NT/IA64
- SAP NW04 SR1 IGS
use the master cd/dvd to invoke sapinst and follow the instructions (plz check on any new cds as 47x200SR1 runs on kernel 6.40 there might be newer instructions found in sapnet!); oracle must be installed before starting sapinst...after that install the central instance followed by the database instance installation. the ides installation differs only slightly from a "normal" installation...just use the appropriate ides export cd/dvd...
plz read the installation guide and the relevant sapnotes carefully!!!
GreetZ, AH

License Key For SAP R/3 Enterprise Demo Version

Hello Basis Gurus,
I have installed SAP R/3 Enterprise Demo Version in my Notebook.
When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
SAP R/3 Details:
Component Version: SAP R/3 Enterprise
Installation Number: INITIAL
License expiration: ..----
Active Hardware Key: C1129820057
System Number: System No. Empty
When i am trying to install the License Key at Command Prompt getting the error message that
Specify your license key:
LICENSE_KEY   1...5....0....5....0...4
LICENSE_KEY =
Wrong license data specified
>        Check the specified license data for:
>        - typing errors
>        - upper / lower characters
>        - same values as noted on license fax
How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
Please advice urgently..

to get hardware key:
saplicense -get
to get license key:
https://websmp106.sap-ag.de/licensekeys

SMSY: Product version SAP R/3 ENTERPRISE 47X200 keeps returning

Hi,
Last year we have upgraded our SAP R/3 ENTERPRISE 47X200 system to SAP ERP 6.0.
For downloading enhancement packages we need the product version to be SAP ERP 6.0. In SMSY however, SAP R/3 ENTERPRISE 47X200 is still mentioned in the product versions list. We can delete it manually (not used in any logical component anymore) and are able to download enhancement packages fine at that moment. However, when we refresh SMSY by reading data from the SLD the SAP R/3 ENTERPRISE 47X200 product version returns in the list of product versions and we have to delete it manually again.
Any ideas?
Thanks,
Regards,
Bart Groot.

check the Note and one of the same threads
Note 1296512 - SMSY: Product version transferred from deleted system
Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

SAP Enterprise Extension HR Patches

HI Folks,
We are planning to upgrade Patches for SAP_HR, while upgrading, we found patches called as
SAP Enterprise Extension HR, is it Related to CORE Hr, do we need to apply these patches.
Experts Plz advice.
Regards,
Sekar.

Hi Guys
Where or not you require EA_HR depends on what HR products you plan to use, you need to check the release notes and pre-reqs of the HR functionality you plan to use
The following link gives you an overview of the core EA_HR functions
- there maybe however be re-use of EA_HR functions by other HR products
http://help.sap.com/saphelp_erp60/helpdata/EN/44/4541e0bc511193e10000000a155369/frameset.htm
EA_HR may also be a pre-req to activate other business functions in SFW5 - eg HCM Process and Forms
Best regards
Stuart

SAP Extension Sets

Hi,
I am trying to use BAPI_MATVAL_PRICE_CHANGE. However, this BAPI nees some configuration to be done before it can be used. This additional configuration is only available once EA-FIN Extension Set (Financials Extension) is activated.
I am aware that there is an alternative where you can update a separate config table to bypass activating the Extension Set, but I also need to implement OSS Note 0000605588 to fix a bug in the BAPI. Because the BAPI is associated with the Extension Set I cannot change the code unless it is activated - a bit of a Catch 22.
I know that Extension Sets contain extra functionality but does anyone know if this will affect the way existing functionality works?
Can you turn off Extension Sets once they have been activated (through SPRO)?
I have also heard that SAP will release Extension Set specific Support Packs. Is this correct?
Thanks,
Pat.

Hello Patrick.
Not sure about all your questions, but the performance assistant does not recommend de-activation:
Do not deactivate a part of the SAP ECC Extension Set that has already been activated, since this can cause inconsistencies in your data. The enhancements made to the structure types mentioned above are also retained.

Activated SAP ECC Enterprise Extension PLM.

Dear Expert,
From where i can activate SAP ECC Enterprise Extension PLM. my problem is i am unable to see document browser tab while editing documet. i have already activated document browser flag (Tcode DCSWITCH).
Bhuwan
Edited by: tbhuwan.kaar on May 9, 2009 3:15 PM

Done by Basis People.

What are SAp Extension sets??

Hi all,
I'm doing a research about customizing in SAP and I've learnt about BC sets and their limitations. But...what are the Extension sets?? Are only predefined sets or can be created as the BC sets?? Are they similar to the BC sets??
Could anyone please give me some clue about them or provide me a link to this information??
Thanx all i advance.

Hi,
BC sets and Extension sets have nothing in common.
A BC set is a set of technical customisings as you said.
An extension set is a set of functional activities that you can activate with SPRO.
For exemple SAP R/3 4.70 has 2 releases of extension sets : 4.70 ext 1.10 and 4.70 ext 2.00.
Best Regards,
Olivier

Ora11 Support for SAP R/3 Enterprise 4.7 x110

Dear Oracle People,
in the "Development Update December 2009" there is a u201CBig picture of supported Oracle releases" on p24.
In this picture it is described that SAP R/3 Enterprise 4.7 x110 will not be supported under Oracle 11.
But SAP R/3 Enterprise 4.7 x200 will be supported.
I do not see a substantial technical difference between these two releases. And i do net see why Extension Set 1.10 does not fulfil the requirements for Oracle 11 as described in upper paper on p12 which seem to be: having a 6.40 kernel and extended maintenance at least until 2010
Can you please explain me why 4.7x110 will not be supported under Oracle 11.
Sincerely
Stefan Dietz

Hello Stefan,
You can crosscheck this with sapnote #1398634
Oracle 11.2 release for older SAP releases
A general release is not provided for earlier SAP releases (SAP R/3 3.1I up to and including SAP R/3 4.6C). Similar to Oracle Version 10.2, there will only be a temporary 11.2 release in direct connection with an SAP upgrade project for these older SAP versions.
Oracle 11.2 for SAP Kernel 6.40, 7.x and higher
Oracle Version 11.2 will be released for these SAP kernel versions. In these kernel versions, basically only those SAP product versions that will still be at least part of SAP Extended Maintenance in 2010 will be released for Oracle 11.2.
[UPDATE]
I have also checked the PAM for SAP R/3 ENTERPRISE 47X110 and the kernel 6.40 is also supported .. really strange
Regards
Stefan

Version of SAP 4.7 Enterprise extension set

Similar Messages

Maybe you are looking for