Version upgrade error JOB_RSVBCHCK_R

Dear experts,
As part of our test upgrade from SAP 46C to ECC 6.0 we faced an error in
phase JOB_RSVBCHCK2, where upgrade phase list ToC suggests to check
t-codes SMQ1,SM13 and we couldt find any outstanding update tasks, so we
continued by ignoring the phase. Now one more error occured in
JOB_RSVBCHCK_R phase,again we check the SMQ1,SM13 T-codes,didt find any
outstanding update tasks. so when we try to ignore the task it is
asking for password provided by SAP to ignore the phase.
is it recommended to skip this phase?if yes does anyone have password to skip the phase?
regards
raghu

I know this was answered, but just wanted to post this for the greater good, in case someone else gets stuck as we did...
During Prepare, we got this error
CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.EQ0
A2EEMCEX 151 Entries for application "11" still exist in the extraction queue 
Long text:
    Cause
      Changing extraction structure &V#& for application &V#& is forbidden,
      because there are entries that have not yet been processed into an
      extraction queue for application &V#& for at least one client.
      If an extraction structure is changed to the entries that are still
      open in an extraction queue, then these are no longer able to be read
      and can cause terminations with the collective update.
    What to do
      Start the collective update using the function "Job Control" in the
      <DS:TRAN.LBWE>Logistics Extraction Structures Customizing Cockpit</>.
      To get an overview of the logistics extraction queues, see the
      <DS:TRAN.LBWQ>Logistics Queue Overview</>.
During Prepare we clicked Ignore because we checked all the active clients on this QA box and nothing for those existing clients was in SMQ1 (or SM13 for that matter).  And in LBWE we had turned all the extractors to Inactive (because our BW system has been not operational for years, and we did not really need extractors RFCs running).
Prepare ended with this error in the checks.log but we thought we could proceed with the SAPUp. 
Then during the actual upgrade, we get the same error, only it won't let you past it without fixing it or getting a password from SAP.  One problem is - you can only login to client 000 at this point.  The other problem was that the Upgrade was checking these RFCs in a non-existent client!
As prerequisite, we know that we have to go to SMQ1 (same as LBWQ) and delete any outbound RFC queues.  The problem in our QA box was that there were some from an old client 444 which did not exist.  So we can see these old RFCs pending from SMQ1 because it shows the client.  But SMQ1 doesn't let you delete entries from other clients.
SAP has a ABAP RSTRFCQD which (per note 763255) deletes queue easily in background.  But this ABAP can't delete in other clients other than the client in which its executed.
We tried recreating the client just so we could login and run this ABAP, but we did not have the SAP* password for that old client.
We felt it was easier to just manually delete the entries rather than deleting SAP* and restarting the system. 
So we just used SQL and deleted the entries from client 444 in the same table SAP's job RSVBCHCK was checking:
delete from TRFCQOUT where QNAME = 'MCEX11' and MANDT = '444'
delete from TRFCQOUT where QNAME = 'MCEX12' and MANDT = '444'
Restarting the upgrade gets back the check in the phase of RSVBCHCK.
In Production, we don't have extraneous clients, so this should not be a problem.

Similar Messages

  • ASA code version upgrade error

    I just recently tried to upgrade the code version of a 5510 from 8.3(2) to 9.1 and got this error:
    This is an ASA image and cannot be loaded on a PIX platform.
    I was consoled into the firewall and watching it boot up, after that error it just said "rebooting..." and nothing ever happened. Can someone please shed some light on this as I have no idea why that error popped up and can't find any documentation about it. I tested the upgrade on a seperate 5510 to make sure it would work beforehand and didn't have any issues. Thanks in advance!

    The problem is that the flash storage is corrupt. I have also received this error in the past. Power cycling did absolutely nothing to help, and I was not able to get far enough to boot from ROMMON to boot to another image. It was resolved simply by processing an RMA with Cisco Systems. Out of many hundreds of Cisco devices that I have installed, I have only experienced this happening one time. It seems (based on research) more common with the ASA for some reason. I have absolutely never had this happen with an ISR, or Catalyst switch. Of course, these are all rather different devices. This problem could just be specific to the ASA itself. I had it happen with a 5505. OP had this occur on a 5510. Perhaps this should be looked in to by the ASA dev. team if it has not already been addressed.

  • Oracle Report Failing After Database Version Upgrade

    Hi,
    I have function code created in RDF file of oracle reports 10g as below-
    create or replace function clobblobtest (TMP_MID varchar2) return varchar is
    missed_text varchar2(1000) := '';
    v_time_stamp date;
    v_end_time date;
    cursor c1(c_time_stamp in date,
              c_mid in varchar2) is
           select mn.TEXT from msgnotes mn
      where mn.mid=c_mid
          and mn.create_date >= c_time_stamp;
    cursor c2(c_time_stamp in date,
              c_mid in varchar2,
              c_end_time in date) is
           select mn.TEXT from msgnotes mn
      where mn.mid=c_mid
          and mn.create_date >= c_time_stamp
          and mn.create_date <= c_end_time;
    begin
      IF ('1' = 'INWARD RETURN') then
        select bbi into missed_text from mtf1000 where mid=TMP_mid;
        ELSIF '1'='QPH Missed' then
      Select max(nj.update_date) into v_time_stamp
      from newjournal nj
      where nj.mid=TMP_mid and nj.status = 'CTOVRQ';
      for i in c1(v_time_stamp,TMP_mid) loop
      missed_text:=missed_text||' '||i.text;
      END Loop;
      ELSIF ('Rejected'='Rejected' OR 'REJECTED'='REJECTED') then
      IF ('TERMINATED' in ('TERMINATED')) THEN
      Select min(nj.update_date),max(nj.ENDDATE) into v_time_stamp,v_end_time
      from newjournal nj
      where nj.mid=TMP_mid and nj.actionid2='16' and nj.actionid1 is null;
      for i in c2(v_time_stamp,TMP_mid,v_end_time) loop
      missed_text:=missed_text||' '||i.text;
      END Loop;
      ELSE
      Select max(nj.update_date) into v_time_stamp
      from newjournal nj
      where nj.mid=TMP_mid and nj.status = 'UNSETLED';
      for i in c1(v_time_stamp,TMP_mid) loop
      missed_text:=missed_text||' '||i.text;
      END Loop;
      END IF;
      ELSE missed_text := null;
      END IF;
    return(missed_text);
    End;
    Note:- Text column from table msgnotes is of datatype CLOB.
    I have executed report having this function before oracle upgrade and it works fine.
    But when i am trying to execute report after oracle version upgrade from 11.2.0.3.0 to 11.2.0.4.0 with same data report fails with runtime error Rep-1401: '' Fatal PL/SQL Error.
    With New version we tried to typecast Text column from clob to varchar and executed report then it works... but report runs on old version without any explicit typecasting.
    Please note when i run and call this funtion from sql developer with upgraded database version it works fine.
    Please advise.

    This error can possibly depend on the fact that the PL/SQL engines are in different versions. When using SQL Developer you use the PL/SQL engine in the database. When using Oracle Reports you use the PL/SQL engine in the Oracle Reports Server (Web Logic Server even maybe). These versions - in the Forms and Reports realm - are different (read: a lower version) than the PL/SQL engine in the database.
    If I check what version I have in Oracle Forms, as an example, I get 11.1.0.7.0 (Help in the Oracle Forms Builder menu) but in the database I have (select * from product_component_version;) 11.2.0.3.0.
    That COULD be your issue...how to fix it I am not sure...

  • HT4972 When I try to update my Ipod 4 touch software from 4.3.5 to the latest version, an error message comes in..."The ipod software update server cannot be contacted"

    When I try to update my Ipod 4 touch software from 4.3.5 to the latest version, an error message comes in..."The ipod software update server cannot be contacted"
    I have also tried downloading a separate 840MB file and manually update, but that doesnt work either

    See the chart below to determine whether you can upgrade your device and what you can upgrade to.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                       iOS 3.1.3
    iPhone 3G                                    iOS 4.2.1
    iPhone 3GS                                 iOS 6.1
    iPhone 4                                       iOS 6.1
    iPhone 4S                                    iOS 6.1
    iPhone 5                                       iOS 6.1
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1
    iPod Touch 5                               iOS 6.1
    iPad 1                                           iOS 5.1.1
    iPad 2                                           iOS 6.1
    iPad 3                                           iOS 6.1
    iPad 4                                           iOS 6.1
    iPad Mini                                      iOS 6.1
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Is Intraoperative patch need for DB version Upgrade in 11i ?

    Dear All,
    I need to apply ATG RUP7 in 11i instance, but the database should be greater than 9.2.0.8 version otherwise it is not possible,, Am i correct .
    Ok now am Upgrading the DB version to 9.2.0.8 then planning to apply ATG RUP7 , then how the Application will work because the application was running in ebiz release version now upgraded 9.2.0.8. Is there any Intero Patch for application.
    Regards
    HAMEED

    Dear hussien,
    Thank u very much,, i have restarted the installation but again failed with some other reason,, now i am not in hurry,, i restored the old backup and released the instance.
    Can u explain me,, i failed in the last part of this version upgrade. that is while running "catpatch.sql", yes its known issue but still i failed several times to run successfully.
    i am getting error like this below:
    The following statement may cause an
    ORA - 29554: unhanded Java out of memory condition error
    If so, this is because there is insufficient system tablespace,
    shared or java pool size, or some other resource value is too small.
    An additional message describing the problem will be output of the statement.
    PL /SQL procedure successfully completed.first of all i have resized the system tablespace, then i changed the shared_pool_size 150m, previously it was 260M by default, and changed java_pool_size 150M previously it was 64M. then started the database with migrate option and i ran the catpatch.sql.
    Obviously it must complete successfully,, but it failed,
    note: its EBS database
    Regards
    HAMEED

  • Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Unistall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Uninstall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

  • I have an ipod nano 4GB and use pc windows xp . since last year my ipod didnt sync any new songs saying "the ipod cannot be synced the required folder couldnt be found" and when i try to update the itunes version another error occured. plz HELP!!!!!!!!!

    I have an ipod nano 4gb and use pc with windows XP. since last year my ipod suddenly didnt want to sync any new songs saying " the ipod "MOAMEN" cannot be synced. the required folder couldnt be found" and when i try to update the itunes version another error occurs and i dont know when i tryed to format ipod i didnt find "format" button. so plz give me suggestions instructions i extremely bored !!!!!!!!!!!!!1

    Uninstall/Reinstall iTunes then try to rebuild the library.
    http://support.apple.com/kb/HT1925  (uninstall/reninstall)
    http://support.apple.com/kb/HT1451 (recreate library)

  • TS1496 when updating iTunes to latest version windows error message appears

    when updating iTunes to latest version windows error message appears

    Okay.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Incompatible class versions :linkage error- JAVADOM

    HI,
       We have done Mapping using java DOm,created ZIp file & successfully imported in IR.  
    My NWDS is using java 1.4.2_15
    we are using PI70/Sp09/Java Version 1.5.0_14
    During Execution in IE we  are getting this error.
    error -
    <SAP:Code area="MAPPING">LINKAGE_ERROR</SAP:Code>
    <SAP:Stack>Incompatible class versions (linkage error)</SAP:Stack>
    <Trace level="1" type="T">Interface Mapping http://XI/Mapping/JavaDom/DOMMapping4 IM_ORDER1_ORDER</Trace>
      <Trace level="1" type="T">LinkageError at JavaMapping.load(): Could not load class: CSJAVA/com/yash/xi/DOMMapping4</Trace>
      <Trace level="1" type="T">java.lang.NoClassDefFoundError: JAVA/com/xi/DOMMapping4 (wrong name: com//xi/DOMMapping4) at java.lang.ClassLoader.defineClass0
    Regards
    shekar chandra

    Hi,
    Check the links they may help u out.
    Event or DOM parsing?
    http://discuss.joelonsoftware.com/default.asp?design.4.156750.12
    XML Parsers: DOM and SAX Put to the Test
    http://www.devx.com/xml/Article/16922/1954?pf=true
    Regards,
    Phani

  • 2007 Upgrade Error Company DB not consistent

    Hi there,
    I am currently using SAP b1 2005 server and client
    im using Sql server 2005 for for database
    while upgrading the system from 2005 to 2007
    every thing(b1 server, client,company database) upgraded succesfully
    but while loging into company it is showing error
    "The company DB is not consistent, Check the SAP Business One log file for more information [Message 131-219]"
    Thank you for your intrest in reading,
    if you encountered similar problem or you know the solution please tell the solution
    also plz tel where can i find solution for this kind of technical issues...
    Thanks & Regards
    Radhakrishnan
    in the log file the error is like the following
    Failed to read threshold from file - ReadThresholdFromFile     C:\Program Files\SAP\SAP Business One\SAP Business One.exe     PID=2828     TID=2180
    30/04/2008  20:27:25:452211        Upgrade            Note           Threashold for IRU is 0.050000     C:\Program Files\SAP\SAP Business One\SAP Business One.exe     PID=2828     TID=2180
    30/04/2008  20:28:16:635453        Upgrade            Error          FromVersion=680318     ToVersion=860029     UPG_DoObjectUpgradeInt 2, error in object index=276, object name=Japanese Local Era, object ID=275
    STACK:
    Frame id=00: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02DF9710
    Frame id=01: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BCC676
    Frame id=02: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BCB392
    Frame id=03: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BCB30D
    Frame id=04: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BC9344
    Frame id=05: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x0257D254
    Frame id=06: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02C3EEB1
    Frame id=07: "C:\WINDOWS\system32\kernel32.dll"; base=0x7C800000, offset=0x7C80B50B
         C:\Program Files\SAP\SAP Business One\SAP Business One.exe     PID=2828     TID=2180
    30/04/2008  20:25:09:463527        Upgrade            NoteLogAlways     FromVersion=680318     ToVersion=860029     Ending the company upgrade     C:\Program Files\SAP\SAP Business One\SAP Business One.exe     PID=2828     TID=2904

    Radhakrishnan,
    I ran into a similar problem recently while attempting an upgrade.  I didn't find a solution to my specific problem but, I was wondering if you had run the pre-upgrade query.  There is a SAP note
    1000846 that refers to upgrade issues and the pre-upgrade query I would run this if you haven't already and see if it returns any results.
    Also: here is a link to the query directly
    [http://service.sap.com/~sapidb/012006153200000918392007E/UpgradeCheckScript_25_2004A_V.txt]
    hope this helps,
    Lucas

  • SP 2013 upgrade error on all discussion lists

    Has anyone had any issue with discussion lists in the upgrade process? Our client based all sites off the team site template and so most all have a discussion list.
    All sites are failing to upgrade on this feature and not sure why. Doesn't seem to be very common problem. Ignore the TimeMaskedControl feature errors, we have resolved those already.
    Any thoughts/suggestions are appreciated!

    did you run the test spcontent database and what about the output?
    Test-SPContentDatabase -Name <DatabaseName> -WebApplication <URL>
     do you have data in the discussion list? also if you can share the upgrade error log only, it will be great help.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Mainframe problem - java -version output : Error: unable to allocate

    Hi,
    I am calling "java -version" command from my java program. my program is executing well but when it comes to execute this command using Java Runtime it giving following error.
    java -version output : Error: unable to allocate 67108864 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 53686784 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 42949120 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 34359296 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 27487232 bytes for GC in j9vmem_reserve_memory.
    JVMJ9VM015W Initialization error for library j9jit23(11): cannot initialize JIT
    Could not create the Java virtual machine.
    and pogram continue executing.
    is any body have idea why it is behaving like this and wht needs to be done.
    this program i am writing for IBM mainframe machine.

    java -version output : Error: unable to allocate 67108864 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 53686784 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 42949120 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 34359296 bytes for GC in j9vmem_reserve_memory.
    Error: unable to allocate 27487232 bytes for GC in j9vmem_reserve_memory.
    JVMJ9VM015W Initialization error for library j9jit23(11): cannot initialize JIT
    Could not create the Java virtual machine.As a guess
    1. Environment is messed up
    2. Install of java is messed up.
    You might look for command line options that allow you to change the heap size. Try making it smaller.
    You might also want to verify that the 'java' you are running is actually the binary that you think it is, versus a script/link to someplace weird.

  • Indesign standard version installation error for Mac OS: "installer failed to initialize.

    Indesign standard version installation error for Mac OS: "installer failed to initialize. Please download Adobe Support Advisor to detect problem". Transferred by application over to new laptop, application considered damaged, with instructions to reinstall. Attempting from downloaded file.

    go to HD>library>application support>adobe>caps and rename the caps folder.
    go to USER library>application support>adobe>OOBE and rename OOBE folder
    install Adobe application manager from below link.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

  • DMM Version Mismatch Error

    I am running a TestStand sequence which makes a call to niDMM_init. Most times this works correctly, but intermittently I get error -1074117853 (every week or so, the function is may be called 50 times between failures)
    "Error, Version mismatch error! Please verify the installation of all NI-DMM components. You may need a newer version of NI-DMM"
    There are a large number of developers here who *may* be using different versions of NI-DMM on theor development machines to what is installed on the Test Rigs. This was my first thought - that perhaps there were some incompatibilities in DLL Ordinals between the various versions of NI-DMM. However, rebooting the rig and running the same sequence again allows it to work. Surely if this was the case - the problem would exist every time?
    Sadly I cant attach the sequence here (since the niDMM_init function is buried inside a code module and a sub dll inside that - but I have traced it through and it is the niDMM_init function returing the error).
    What I need to know is:
    Is there a problem with developing on one driver version and then running with another?
    If all the developers use the same versions of the drivers or at least compile the software with the same version - will this go away?
    Why is the problem intermittent?

    My mistake - posted to the wrong board. Have reposted in DMMs

  • My First Major Version Upgrade on Mac

    Hello, this is going to be my first experience with a major version upgrade on a Mac. My question is simple, will Software Update see it (it doesn't show version 8 yet) or am I to download it manually seeing as it's already available for manual install.
    Thanks.

    Thank you for your quick reply. I will sit here and wait then.

Maybe you are looking for

  • IP Phone Over SSL VPN Registering Issue

    I have a Cisco 7945G phone that I have setup with a VPN profile so it can be used remotely.  This device was configured properly, tested at multiple locations and implemented.  This device worked fine for several months but recently the end user has

  • PO report with cost center, order and delivery date

    Hi, pls. I just need a report to display the next fields Account Assigment and Delivery Date. I attempted with standard reports like ME2N, ME2K but it is impossible to display all the information in the same screen. Thanks a lot for cooperation. Rega

  • Could not resolve mx:horizontalAxisRenderers to a component implementation

    Hi,     When I  running the following code mx:horizontalAxisRenderers>             <comp:ScrollableAxisRenderer id="scrollAxisRenderer" axis="{t_value}" tickPlacement="none"   placement="bottom"                     labelGap="3"  maxVisibleColumns="8"

  • Customizing the Wiki sidebar step by step

    I'm having severe problems with my Wiki-setup. Frankly the worst Apple-experience in my entire life. When I'm done with this thread, I'm certain that a lot of other people will have an easier time configuring a custom sidebar in their own Wiki. At th

  • Changes in Sales district

    Dear All, i am creating sales district in customization,after some time i want to see the changes of customization means person name,time of change,what date was. regards Ajit