'Vertical zoom automatically adjusts track height" -- how?

Perhaps its somewhere out there (or here) right under my nose, but after much searching I have not been able to find anywhere how to take advantage of this new feature in the 10.0.3 Yosemite update for GB. Not in the manual or online where its mentioned with the other new features everywhere, but no one describes how.
And, am I reading this 'new' feature correctly -- that we can now vertically enlarge all tracks at once or, far better yet, be able to heighten each individually? Or is just the same old thing added to the prior update/version (i think) that added automatically enlarging/heightening the first 3 new tracks added to a song---which is helpful, but then squeezes 'em all back down smaller and smaller the more tracks one adds.
thanks!
Sander

Not in the manual or online where its mentioned with the other new features everywhere, but no one describes how.
There is nothing to describe. We do not have any control at all about the height of the racks. It is adjusted completely automatic.

Similar Messages

Problems with Automatic Adjust row height in FRs ver. 11.1.2.1.103

Hi
We have just upgraded to 11.1.2.1.103 from 9.3.3.
.103
We had a fairly complex report that worked in the previous environment, but not anymore.
We have a number of text lines with that pulls from other lines in the report that are hidden.
It is celltext that we are reporting on.
The lines are setup, so the row height should just adjust depending on the amount of text, but it does no longer work for consecutive lines with the adjust row hight atribute swithed on. I now have to insert blank text lines with a fixed height in between to get it to work.
It makes the report the report look messy, so has anyone had similar issues and know a work around or a possible patch.
KR
Per

Okay,
I tried that I when I tried to use: sqlplus -s I got the following results
SQL> sqlplus -s
SP2-0042: unknown command "sqlplus -s" - rest of line ignored.
I am also still getting the following in my output:
Any other suggestions?
SQL> Select
2 'Siebel CVP' as Source_Name,
3 'RCI' AS Brand,
4 'Phone' AS Channel,
5 'Inquiry' AS EBR_Type
6 FROM dual;
Siebel CVP RCI Phone Inquiry
SQL> set head on
SQL> Select
2 substr(con_home_ph_num,1,10) AS Chan_Addr,
3 'No EBR Date' As EBR_date,
4 substr(x_rccl_brand,1,3) AS Brand,
5 'Phone' AS Channel,
6 substr(con_person_uid,1,21) AS Src_Id,
7 substr(x_rccl_source,1,23) AS EBR_source,
8 'Inquiry' AS EBR_Type
9 FROM
10 siebel.eim_contact
11 WHERE
12 con_home_ph_num is not null and
13 con_home_ph_num > '201'
14 and length (con_home_ph_num) = '10'
15 and con_home_ph_num <> '0'
16 and con_home_ph_num <> '1111111111'
17 and con_home_ph_num <> '9999999999'
18 and con_home_ph_num <> '0000000000'
19 and con_home_ph_num NOT LIKE '+%'
20 and con_home_ph_num NOT LIKE '0%'
21 and con_home_ph_num NOT LIKE '123%'
22 and con_home_ph_num <> '2222222222'
23 and x_rccl_call_type is null
24 and x_rccl_brand = 'RCI'
25 and TO_DATE(TO_CHAR(x_rccl_entry_date, 'MM/DD/YYYY'), 'MM/DD/YYYY') >= TO_DATE(TO_CHAR(sysdate, 'MM/DD/YYYY'), 'MM/DD/YYYY')
26 and x_rccl_source IN ('CTI','CTI_GVS','CTI_HOTWEB','CTI_PRE_SHOPPING_CALL','DIR_PASTGUEST_RECONNECT')
27 ORDER BY
28 con_home_ph_num asc
29 /
CHAN_ADDR EBR_DATE BRA CHANN SRC_ID EBR_SOURCE
EBR_TYP
5167350937 No EBR Date RCI Phone Prospect - 1-3IIJ-218 CTI_PRE_SHOPPING_CALL
Inquiry
8054977010 No EBR Date RCI Phone Prospect - 4861358 CTI_PRE_SHOPPING_CALL
Inquiry
SQL> spool off

Make iframe automatically adjust height according to the contents without using scrollbar?

Hello,
I am developing the site (www.meninasreais.com.br) and have a doubt. I created the base html - menu, header - in Adobe Muse. I'm trying to insert an iframe that automatically adjust the height according to the content of the blog.
I tried with various codes, the frame is installed on the same domain as the site and none of them worked. What can I be doing wrong? Thank you.
The code that was inserted below:
<script language="JavaScript">

</script>
<IFRAME SRC="www.meninasreais.com.br" width="600px" height="200px" id="iframe1" marginheight="0" frameborder="0"onLoad="autoResize('iframe1');"></iframe>

Hi, i've successully done this for my blogging engine.
I've uses jquery.autoheight.js
In my page property :
<script type="text/javascript" src="http://www.solutionsip.ca/lib/js/jquery.js"></script>
<script type="text/javascript" src="http://www.solutionsip.ca/lib/js/jquery.autoheight.js"></script>
In my html box :
<iframe id="myframe" name="myframe" class="autoHeight" width="100%" scrolling="no" marginheight="0" frameborder="0" src="http://www.solutionsip.ca/blog"></iframe>
This work in Adobe muse. My iframe adjust it self with my blog content.
Exemple : http://www.solutionsip.ca/blog.html

Automatically adjust vertical of page to fit vertical of view port

Looking for a CSS rule (or xhtml code) to make the the content of my page automatically adjust vertcially to the viewport height on any monitor. Using standard box model floated layout. Everything looks as I want, but I noticed that on a larger monitor there's space below my page content. The space is the background color / image, which is OK, but I wanted to see if there's a way to stretch the vertical page automatically.
Help greatly appreciated.
Tom

True Vertical Centering is more a print concept than a web concept. I can show you how to force vertical centering in browsers but this technique isn't practical for use on full web sites.
http://alt-web.com/TEMPLATES/vertical-center.html
A safer approach is to simply add some margins and padding to the top of your #container.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Make iframe Webcenter 11.1.1.5 automatically adjust height according to the content

Hi All,
Anyone can help me how to make Iframe (application page template) webcenter portal automatically adjust height according to the content?
Thanks in advance..

Hi, i've successully done this for my blogging engine.
I've uses jquery.autoheight.js
In my page property :
<script type="text/javascript" src="http://www.solutionsip.ca/lib/js/jquery.js"></script>
<script type="text/javascript" src="http://www.solutionsip.ca/lib/js/jquery.autoheight.js"></script>
In my html box :
<iframe id="myframe" name="myframe" class="autoHeight" width="100%" scrolling="no" marginheight="0" frameborder="0" src="http://www.solutionsip.ca/blog"></iframe>
This work in Adobe muse. My iframe adjust it self with my blog content.
Exemple : http://www.solutionsip.ca/blog.html

Is there a way to manually adjust the vertical zoom in the keyframe editor?

I often want to zoom in on a particular set of keyframes so that I can adjust them, but there seems to only be options for horizontal zoom and autozoom. Is there a way to adjust the vertical zoom?

Backup to iCloud
http://i1224.photobucket.com/albums/ee374/Diavonex/126e3a863054886639722bd85739c f44_zps11ce91d1.jpg

When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

This is typical of the default NEF RAW conversion of Aperture and the best thing you can do is set up a few presets to apply to all of your RAW images to get a tone curve and colors that is pleasing to you as a default. The in camera JPEGs / embedded JPEGs (that you first see during import) are treated to the Nikon "Picture Control" settings that are set on the camera - the RAW's as interpreted by Aperture are not.
I have written extensively and even have a few downloadable presets on my site - look for NEF...
http://photo.rwboyer.com/
RB

How-to-tick-automatically-adjust-clock-for-daylight-saving-changes-for-domain-users

hi
please help me
I am using windows 2008 as a domain controller with windows XP & windows 7 as a client.
how-to-tick-automatically-adjust-clock-for-daylight-saving-changes-for-domain-users
Thanks in Advance
my mail: [email protected]

Some more information would be nice (how many computers are in the domain?), but I think I have what you're looking for.
What you need to do is change a registry key in the client computers. It's located in the registry at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
The string name is DynamicDaylightTimeDisabled and the value for this item is
0 (Kind of weird - by entering 0, you're saying "No, I DON'T want to DISable daylight savings time).
Of course, you'll need to deploy this registry information to the clients from the server. There are several ways to do it, but the first one I'd try is to create a registry preference item on the server and deploy it as a GPP.
This link explains how to do this:
http://technet.microsoft.com/en-us/library/cc753092.aspx

Embed wordpress with iframe that automatically adjusts height

I have been on the search for an iframe code like the one shown in the embedding tumblr jam session but I need one that will adjust the height of the iframe according to the content of the page! its for embedding a wordpress blog into my muse blog section!
anyone please!
I built this site with muse, and I'm currently working on the mobile and tablet versions!
http://rigandkeel.com

Try this: (Fluid iFrame)
http://www.dyn-web.com/tutorials/iframes/fluid/
From here:
http://www.dyn-web.com/tutorials/iframes/
Nick.

How do I turn off "Automatically adjust brightness" on Mountain Lion using AppleScript

I'm new to Mac, Applescript and Automator and I'm trying to make a automation for when I perform on stage and found a script to set the brightness all the way up but can't find a script to disable "Automatically adjust brightness". Any help would be appreicated.

You could even both “set the brightness all the way up” and “disable Automatically adjust brightness” with just one and the same script:
tell application "System Preferences"
    -- launch
    -- activate
    set current pane to pane id "com.apple.preference.displays"
    reveal anchor "displaysDisplayTab" of current pane
    tell application "System Events"
        tell process "System Preferences"
            tell group 1 of tab group 1 of window 1
                set value of slider 1 to 1.0 -- max
                tell checkbox 1
                    if value is 1 then click
                end tell
            end tell
        end tell
    end tell
    quit -- optional
end tell

Is there any function to automatically adjust the voice volume in the multitrack

I'm trying to mix voice sounds and music files into one track. Sounds easy! But almost every music has its loud parts(for example the climax) and quiet parts. Therefore when i listen to the voice and the music at the same time, the voice files are sometimes relatively too quiet and sometimes to loud. I don want to adjust the volume pan one part after another because I have a lot of files to mix. Could you tell me is there any function I can use to automatically adjust the voice volume to make it always 'just a bit higher than the music'? Or can I read some documents about this problem?
Thank you very much!

Sounds like you want to do what is called "ducking" & "side chaining".
First try using a compressor and or limiter on the voice tracks to get a more even volume.
Google: Audio Ducking tons of stuff on how to.
I myself have never tried this with Audition, or the compressors that come with it. I have done it in other multitrack software and older versions of Dave Browns Compressor.
Duff

Automatic adjusting of the volum level

Does anybody know in witch way/how the player does the automatic adjusting of the volum level? How does the automatic adjusting of the volum level work? Is it just the decibel that is "normalising"? How does the player measure it? Are the frequenses exactly the same in a song/tune after the automatic adjusting?
Is there anything else in the sound that is influenced in any way?
JN
Macbook Pro Mac OS X (10.4.8)

Again, camickr is great, and, clever.
Here's the working code basing on his suggestion.
It is my first time for calling prepareRenderer() from within application code.
I have had overridden it many times in the past, though.
    width = 0;
    cc = table.getColumnCount();
    rc = table.getRowCount();
    for (int c = 0; c < cc; ++c){
      maxcw = 0;
      for (int r = 0; r < rc; ++r){
        Component compo
         = table.prepareRenderer(table.getCellRenderer(r, c), r, c);
        int w = compo.getPreferredSize().width;
        if (w > maxcw){
          maxcw = w;
      maxcw += 7; // somehow, this handcraft is necessary
      table.getColumn(table.getColumnName(c)).setPreferredWidth(maxcw);
      width += maxcw;
    height = (table.getRowCount() + 1) * table.getRowHeight(); // +1 == header
    js.setPreferredSize(new Dimension(width, height));
    // js is a JScrollPane enclosing the table

F5061 Balance in local currency EUR is too large for automatic adjustment

My Company code currency is EUR. The customer has made a downpayment in USD (say 100) and i am now to clear the same against invoice of same amount in USD (100 $) but its is resulting into minor differences in Local currency. I am getting the following error
Balance in local currency EUR is too large for automatic adjustment
Message no. F5061
Diagnosis
For postings in foreign currency, it is possible that the balance in foreign currency is zero, but not in local currency. Providing the balance in local currency does not amount to more currency units than the document has line items, the system adjusts the amounts automatically. If an automatic adjustment is not possible, the amounts must be adjusted manually in local currency.
System Response
The document is not posted in local currency without adjusting the amounts.
Procedure
Adjust the amounts in local currency.
How can i have the system automatically fetch the Gl accounts to post the exchange rate differeces.
I have maintained the settings in FBKP- Exchange rate differenes
Thanks & Regards
Pooja

Hi,
I have the same problem; my company code is defined in HUF and I am trying to post a vendor invoice in Euros.
I have a 10% maintained there and still receiving the error, either for differences of just one HUF. The strangest thing is that differences are automatically adjusted (also for discrepancies over the 10%) when posting through FB60 but not when using FB01.
Any idea?
Thanks in advance for your input.
Best regards.

Can we adjust ROW height in ALV report as like of Excel ?

Dear all,
Can we adjust ROW height in ALV report as like of Excel sheet ?
Can we increase/decrease the row height in the output display ?
How ?

kps204020 wrote:
Thanks a lot for your response.
I've tried your proposal, but it has no affect. The report cells show all their content using as much lines as necessary for this.This is the default behaviour for HTML table data (tables and cells expand to fit their content).
So I still have rows with lots of lines and rows with only a few lines mixed in my IR dependant on the cell content. Because some rows filling nearly the whole screen, it is difficult to get an overview with regard to adjacent rows.
I'm using Application Express 4.1.1.00.23. with Theme 21. Scarlet and Firefox 17.0.1.Are all users using Firefox?
Actually I'm working on my first APEX Solution for usage in my company and the customers demanding a solution for this topic . So I'm very keen to find a solution.
I'm very much looking forward to your response.I've been involved with similar issues in the past. My first response is simple: Does this data have to be shown in the report? Can the offending column(s) be removed from the primary report? They will still be visible in the single row view, and the detail view if there is one.
The second option is to create a detail view for the report with a structure that is better suited to the data involved, and make this the default view. (For an example of this, see the treatment of the PRODUCT_DESCRIPTION column in the detail view of the Products report in the Sample Database Application: click on the View Detail button on the Products page.)
The third possibility is some kind of customization of the presentation of the data. This will involve using some combination of HTML/CSS/Dynamic Actions/Plug-ins/JavaScript that you may not be familiar with: do you have experience of these? To go down that route you need to describe in detail how you want to present the data, or what behaviour is required when the data is too long, and share an example of the report on apex.oracle.com that we can work with.

Financial Reporting 9.3.1 automatically change the height of the row

How can I make the reports generator automatically change the height of the row if the text does not fit into the cell? I tried different PDF generators (AFPL Ghostscript 8.51, Adobe Acrobat Distiller 6.0) but result was the same: http://sql.ru/forum/actualfile.aspx?id=6396177

Hi,
In HFR if you are not allowing expansion on the row or column, it wont expand itself according text length.
So you need to anticipate the row hight and width according to your need. You can define this in the property sheet.
Thanks,
aly

'Vertical zoom automatically adjusts track height" -- how?

Similar Messages

Maybe you are looking for