Very Strange Internet Problems
I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.
I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.
Similar Messages
-
Very strange internet problem...
So, I just did the update last night, and I think after that my internet stopped working...It was late, so I just went to sleep.
This morning, I wake up and open Firefox...Internet not working...Even though I know it won't work, I open my remote desktop connection and try to log on to my work computer using the wi-fi in my apartment...Well, for some reason that worked.
I am typing this message right now through a remote connection, but using the same wi-fi that firefox and safari tell me that is no internet connections when I try to open it up from my computer.
To make it even weirder, I opened quicken on my computer here and tried to download transactions, and not only did it download them, but it took me to the actual bank site and I could navigate all over it...But when i tried to go to a different website, it did the exact same thing and stalled out again.
How can I use this internet connection to log on remotely and use the internet remotely, but on local programs, it tells me I have no internet connection?
My modem and router are clearly fine since I can access the internet under certain circumstances. Any thoughts?Your problem sounds similar to one that I am having as well, after downloading the update for Mac OS X 10.5.8. After I downloaded the update and restarted, my MacBook Pro could not find an internet connection. I was sitting in my living room and even trying to find my network again, my computer failed to connect. I went into the dining room where my Airport station is, unplugged the Airport and restarted the MacBook. I was able to get back on the internet and everything worked fine. However, once I went back in the living room (which is only another 20 feet or so) I no longer had internet connection. This continues to happen today. I am fine if I work in the dining room, about 5 feet from the Airport station, but as soon as I go in the living room, I lose connection. I checked my iPod touch and was able to connect to the network even farther, which leads me to believe it isn't my cable modem connection.
All of this happened after downloading OS X 10.5.8. I even tried going to the Apple site and redownloading and installing 10.5.8, but that didn't solve it. Anyone have any solutions, or know anything else regarding this problem? -
Very strange power problem...
Hey guys (and girls ofcourse),
I'm having a very strange power problem with my late 2007 2.2Ghz santa rosa macbook.
Can you guys help me determine what the problem could be?
Here's what happened prior, when the macbook was still working. I got home from work, plugged my adapter into the wall, and it started charging. I left it on the table, and when I came back from the diner table I continued working, but suddenly noticed my macbook wasn't charging anymore. (the orange/green led wasn't lighting up but i was able to work on battery power)
I thought it was the poweradapter, so I went to the apple store the next day to lend one to test it. That didn't work, so it's not the adapter.
So then I started thinking it must be the magnetic DC connector. So I ordered that from the guys at ifixit, (since it's out of warranty) but I replaced it and it's not working.
I don't think it's the logic board, because I was able to continue working until I ran out of battery power. And I also don't think it's the battery connector, because if i'm not mistaking, the macbook can run without battery as well, but mine can't anymore.
Now I can't get any life out of my mac anymore...
Might there be something I overlooked?
Any suggestions are definately welcome!
Thanks a lot.
Timo from Belgium.Hi Timo,
I think i have the same problem, my mac is not working without battery in it. and it wont charge it.
i wrote a post here http://discussions.apple.com/thread.jspa?threadID=2105648&tstart=0
let me know if you have fixed the problem
thanks -
I've encountered a very strange focus problem that I hope someone can help me
with. In my frame, I have a toolbar and some JTextFields. When I press one of
the toolbar buttons, I do whatever and at the very end I use requestFocusInWindow()
to set the focus to one of the JTextFields. Now here's the strange part. If I don't
touch the keyboard or the mouse, I can see the caret in the JTextField as expected.
As soon as I move the mouse or touch any key, the focus changes to the next
toolbar button. Makes no sense to me. By the way, I'm running 1.4 on Windows NT.Create a new class ToolbarButton extends JButton where you have the following method:
* Identifies whether or not this component can receive the focus.
* A disabled button, for example, would return false.
* @return true if this component can receive the focus
public boolean isFocusTraversable() {
return false;
}This prevents the buttons from getting keyboard focus, this makes only sense for toolbar buttons.
Cheers,
Taoufik -
HI ALL
I am having a very strange mrp problem and that is
I created a material with all mrp1and mrp2 requirement,created the info record and source list for that material.I created a reservation for that material which in turn created the deficiency when I did the MD04.I run the MD03,as per re-order point and fix lot size two Preqs created( vendor was not shown in the Preqs even though I established the source list for the material?).I change these Preqs into PurOrds and did the Gr.Every thing fine till here all changes happened in material requirement list(MD04).Now I did one more reservation and created the deficiency again and run MD03 again with a message that mrp done but this time when I went back and checked MD04, there is no Preqs shown and deficiency remained same as was before. I did the same exercise on several material and every time I am having the same problem as the 2nd time the Preqs don't show in MD04. Please help me as I check upto my knowledge but unable to resolve this one.what is the control parameter of the MRP run that you select.
-
Very Strange Bluetooth Problem
Hi There
My mac seems to have developed a very strange bluetooth problem. When i try to connect my mighty mouse, it 'connects' then a couple seconds later disconnects, then connects and disconnects etc. during the time that it is apparently connected, the LED on the bottom of the mouse keeps flashing in the way it does when it's searching for a connection, which tells me it ain't connected at all.
Thinking this was just a mighty mouse problem i try connect my iPhone, same problem. This time I do it with the bluetooth preferences open i notice that the status of the iPhone connection has gone funny (like it has not connected on top of the word connected in the status, one atop the other) this weirdness happens irrespective of what you connect, and only to the iPhone status, even if it's bluetooth is off.
This weird status thing has happened before, when i was messing about with bluetooth tethering on my iPhone. So, naturally, i assume the iPhone's buggered up the system somehow. I remove it from the list of paired things and try the mouse again, no luck. I try to re add the mouse, but the pairing process doesn't complete itself before the mouse drops signal again. I can't re-pair my iPhone either for the same reason.
how can i fix this?
Cheers, JoeHey there,
Navigate to HD > Users > Your Account > Library > Preferences.
Locate, and move to the Trash, this file com.apple.Bluetooth.plist.
If still no luck, try zapping the PRAM to see if that helps. Instructions on how to do that can be found [HERE|http://support.apple.com/kb/HT1379].
B-rock -
Need your help with very strange Oracle problem..
hello,
At our office we have an oracle 10g database (don't have exact version on hand) installation that stores data for many of our applications. We are having a very strange, intermittent issue that is causing us lots of headaches lately.
The problem is, the database will be running fine, humming along, with clients connected to it, from different hosts, different networks, and using different technologies (PERL DBI::DBD, OJDBC, etc). Every so often (at intermittent intervals, no real patterns we can discern), it seems as though the database will just hang and not respond to requests for a few seconds. Outages have ranged from 1,2,3 seconds to sometimes 20,30,40 seconds (very rarely longer than 5-10 seconds though).
Over the last few weeks, we've done lots of work to try and rule the network out of the equation. Today, a java client i wrote that was running locally on the database host, connected via OJDBC timed out (my timeout was set to 5 seconds) running a simple query ("select sysdate from dual") at the same time as all our other remote clients.
I'm really not sure where else to look at this point. Our DBA department says they see no errors in the database, no indication of problems anywhere. We've ruled out our backend applications and the network at this point. The java test client i wrote was running from about 5 different clients, dispersed through many different networks. They all timed out at the same time as other network clients that run via perl's dbi/dbd framework.
Can anyone suggest what would be a possible cause for this? How could it be possible that network clients issuing "select sysdate from dual" would hang for over 5 seconds?
Thanks in advance for any suggestions you can offer.I am hoping you are not in a situation where your DBA said there's nothing wrong with database, your network admin said networking issue ruled out, your system admin said OS is normal. Yet, you as end user suffer and end up trying to figure out the issue by yourself while you didn't have expertise in any of these fields.That's basically the situation we were in for a few months here. It was, to say the least, extremely frustrating. Since we wrote the applications that were suffering the most due to this db/hardware issue, naturally, we felt "responsible" for taking the ownership to track down and fix the issue (after some perseverance ,we were finally able to narrow this problem down to a database storage issue).
After exhausting every other dba theory about DBI/JDBC/Firewalls/Networks/etc, we simply just failed over our database to some standby hardware that had some directly attached storage (as opposed to a SAN configuration like our primary db instance runs off of), and the problem has basically disappeared at this point. It's been about two weeks now. Whereas we normally see a handful of episodes a day, now we see none.
Our system administrators are looking into our SAN now and working to optimize its performance.
Hopefully this will put this mystery to bed. It's been a long year+ chasing this problem down and I'm glad to see it licked finally. Thank you all for your input. I've learned quite a bit about Oracle in the process and I sincerely hope our DBA team here has learned something valuable from this exercise too. -
Very Strange Internet Access Behavior After upgrade to systemd
Currently I'm having very strange issues with my wireless connection. Currently, if I connect using netcfg to a wireless access point, I have the following behavior:
1. chromium can connect to any website
2. thunderbird can send/receive emails
3. curl, firefox and opera can connect to some https sites but not http (yes: https://www.facebook.com, https://bbs.archlinux.org, no: https://archlinux.org, https://github.com)
4. wget does not connect, neither does pacman -Syu
after I upgraded to systemd, I was getting errors because of groups, so I removed extra groups. Here's what I have now:
There is currently no rc.conf in /etc
$ id ambantis
uid=1000(ambantis) gid=100(users) groups=100(users)
$ id root
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),19(log),1000(wheel)
If I try to remove the wheel group, then netcfg does not allow me to connect, neither can I connect manually with wpa_supplicant and dhcpcd
Here's the output of $ systemctrl
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 5 Series/3400 Series Chipset KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-eth0.device loaded active plugged 82577LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb1-1\x2d1-1\x2d1.4-1\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlan0.device loaded active plugged RTL8191SEvB Wireless LAN Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda7.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged HL-DT-ST_DVDRAM_GU40N
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-eth0.device loaded active plugged 82577LM Gigabit Network Connection
sys-subsystem-net-devices-wlan0.device loaded active plugged RTL8191SEvB Wireless LAN Controller
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
cups.path loaded active running CUPS Printer Service Spool
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
colord.service loaded active running Manage, Install and Generate Color Profiles
console-kit-log-system-start.service loaded active exited Console System Startup Logging
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
healthd.service loaded active running A daemon which can be used to alert you in the event of a hardware health monitoring alarm
netcfg.service loaded active exited Netcfg multi-profile daemon
ntpd.service loaded active running Network Time Service
polkit.service loaded active running Authorization Manager
slim.service loaded active running SLiM Simple Login Manager
sshd.service loaded active running OpenSSH Daemon
syslog-ng.service loaded active running System Logger Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
cups.socket loaded active listening CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
syslog.socket loaded active running Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded active active Syslog
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
85 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.UPDATE:
I've managed to make changes to the passwd file so that uuidd is in fact uuidd (instead of uuid). I've also gone through and restored the groups of postgres and tomcat. I'm still having the same behavior. After booting up, here are the new entries from /var/log/errors.log:
Nov 21 13:09:55 localhost /usr/sbin/crond[339]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Nov 21 13:16:17 localhost dhcpcd[803]: wlan0: sendmsg: Cannot assign requested address
Nov 21 13:30:27 localhost dhcpcd[814]: wlan0: sendmsg: Cannot assign requested address
Nov 21 13:34:28 localhost dhcpcd[1285]: wlan0: sendmsg: Cannot assign requested address
Also, here's debug info from netcfg:
[root@okosmos 1000]# NETCFG_DEBUG="yes" netcfg GroundWork
DEBUG: Loading profile GroundWork
DEBUG: Configuring interface wlan0
:: GroundWork up [ BUSY ] DEBUG: status reported to profile_up as:
DEBUG: Loading profile GroundWork
DEBUG: Configuring interface wlan0
DEBUG: wireless_up start_wpa wlan0 /run/network/wpa.wlan0/wpa.conf nl80211,wext
DEBUG: wireless_up scanning
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant scan
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant scan_results
DEBUG: wpa_find_essid "GroundWork"
DEBUG: wireless_up Configuration generated at /run/network/wpa.wlan0/wpa.conf
DEBUG: wireless_up wpa_reconfigure wlan0
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant reconfigure
DEBUG: wireless_up ifup
DEBUG: wireless_up wpa_check
DEBUG: Loading profile GroundWork
DEBUG: Configuring interface wlan0
DEBUG: ethernet_up bring_interface up wlan0
DEBUG: ethernet_up dhcpcd -qL -t 10 wlan0
DEBUG:
DEBUG: ethernet_up hostname okosmos
Finally, here is current output from id and systemctl
[root@okosmos ~]# id
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel),19(log)
[root@okosmos ~]# id root
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel),19(log)
[root@okosmos ~]# id ambantis
uid=1000(ambantis) gid=100(users) groups=100(users)
and $ systemctl
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 5 Series/3400 Series Chipset KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-eth0.device loaded active plugged 82577LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb1-1\x2d1-1\x2d1.4-1\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlan0.device loaded active plugged RTL8191SEvB Wireless LAN Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda7.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged HL-DT-ST_DVDRAM_GU40N
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-eth0.device loaded active plugged 82577LM Gigabit Network Connection
sys-subsystem-net-devices-wlan0.device loaded active plugged RTL8191SEvB Wireless LAN Controller
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
cups.path loaded active running CUPS Printer Service Spool
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
colord.service loaded active running Manage, Install and Generate Color Profiles
console-kit-log-system-start.service loaded active exited Console System Startup Logging
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
healthd.service loaded active running A daemon which can be used to alert you in the event of a hardware health monitoring alarm
netcfg.service loaded active exited Netcfg multi-profile daemon
ntpd.service loaded failed failed Network Time Service
polkit.service loaded active running Authorization Manager
slim.service loaded active running SLiM Simple Login Manager
sshd.service loaded active running OpenSSH Daemon
syslog-ng.service loaded active running System Logger Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
cups.socket loaded active listening CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
syslog.socket loaded active running Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded active active Syslog
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
85 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
The only error I see is with ntpd, and I believe it is because it can't access the internet connection. -
Hellou everybody,
I have very strange problem and I don't understand WHY.
when i run this query:
SELECT regexp_instr(nvl(trim('LDAPexport_20150429'), '^.*$'),'^\^[0-9]{2,2}_[A-9]{1,1}[A-9]{1,4}/') FROM dual; --ERROR
I always getting this error: ORA-12728 - invalid range in regular expression
but when I run this:
SELECT regexp_instr(nvl(TRIM('LDAPexport_20150429'), '^.*$'), '^\^[0-9]{2,2}_[A-Z0-9]{1,1}[A-Z0-9]{1,4}/') FROM dual -IT WORKS
My client version is: 11.2.0.1.0
DB version:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
"CORE 11.2.0.3.0 Production"
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Please can somebody tell me what is the problem? Because I found this issue in production code and my collegues can run it.
Thank YOUand i have created one transient field Static_cr_limit where i set default value using SQL option- which comes from another table. Can you tell us the expression you used to default this field. Also a little more details or a similified use case as ADF7 mentioned would help.
-
Help! Strange Internet problems!?
We just got weird internet problems! Very annoying! I'm writing from iPhone now!
Facts:
-Starting today, both our Macs started having problems accessing only SOME parts of Internet ?! E.g: Can access google, but NOT gmail.com from Safari. Can access both from Firefox. Can't access this forum from any browser?!
-Mail downloads/sends some accounts but not others
-Tried restarting Macs & modem & router
- called Time Warner
- no recent changes to macs
Any ideas!?More weird results.
It turns out CAN access this forum from Safari browser, but it takes a VERY long time to load.
I tried our iPad. I can access this forum fine and it loads right away using same WiFi as laptops?!
I still can't access gmail.com from Macs or iPad, but can access it just fine from iPhone (via AT&T, not home network.) Errors: Opera says "Session closed by remote server". Safari on iPad says " server stopped responding". Safari on Macs says "can't open ... because server isn't responding"
MOST urls load fine and super fast. Only a few don't load at all (e.g: gmail.com) via home network. Others load fine on iPad on home network but VERY slow on Macs (e.g. this forum)?! Everything seems to work fine from iPhone using AT&T network.
I'm really confused?! -
Strange internet problem on Imac 24" 10.6.3
Right so I've tried to search this and found nothing so sorry if this has been answered but I seem to be having an insane problem.
Basically almost any web page won't load at all, every so often one will work after about 5mins of loading. Ones that do work are facebook and google....
I typically use firefox (3.5.11) but have tried using various other browsers (tried chrome & safari) with no luck.
I don't know why, but they are still very slow. What is also very strange is that sometimes upon loading a page i'll get the typical message "problem loading page - server cannot be found" then if i hit refresh, it will just quickly show the exact same page again, with no actual attempt to reload it. I am not using any P2P software or anything else to hog bandwidth, i simply only have the browser open it does not seem to work.
Normally I'd would put this down to a network problem but I am using the same network with my macbook, and dozens have friends have tested it with their laptops with no problems.
Thanks for any replies in advanceHey, I took my took my Imac into the apple shop and got it all sorted,
Basically i had manually entered some DNS servers that were basically obstructing me from accessing any webpages.
To fix it they basicaly clicked the wifi symbol in the top right of the screen,
clicked open network preferences,
clicked the DNS tab, in there left pane there were 2 D.N.S servers (just 2 rows of numbers and points basically) both in BLACK,
then click the - button while they were highlighted to delete them, and the default came up in GREY.
Since then everythings worked perfectly, I hope this helps you sylvia -
A very strange synchronization problem
Hi Everybody,
I would like to get some help regarding a strange synchronization problem that I have found. I have created a java server application and after a lot of testing I have found the following problem:
A certain thread (Thread-A) is stuck forever on a synchornized (objX) line, whereas another thread (Thread-B) every 30 seconds performs a section which is protected by the same synchornized (objX) line.
It seems that the objX is not held by any thread, but Thread-A is stuck forever.
The BUG is reproducible after the server runs about 1 day.
The server is running on Linux machine (Red Hat 7.3) with JVM 1.4 (Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01)).
I would appreciate any help.
Thanks In Advance,
Idan ZachThis is not a starvation problem since Thread-B performs its job every 30 seconds. The job is very short (I have added log messages before Thread-B starts its job and after it completes the job).
However, the priority of both threads are the same.
Thanks In Advance,
Idan Zach -
I have a very strange problem with Arch. I know the title isn't very descriptive, but i don't have a quick, short way to say this:
I love Arch. I use it as a "secondary OS" and other than the times when i'm playing with other distros to see how they've changed, i'm in Arch on my devel system and a few others....However, i still use Debian (Testing) as my desktop/laptop/primary PC OS. For the longest time (probably well over a year), i could not figure out why i could not bring myself to use Arch as my primary OS.
About 2 days ago, i finally had a epiphany (Well...someone smacked me with a CD-R containing the source for the Epiphany Browser, but that's besides the point). The reason i can't use Arch as a primary desktop is because in Arch, i'm too tempted to play with stuff, play with new apps, break stuff, etc and like most people (probably), on my main Desktop, i want stuff to work...I don't want to be breaking things on a weekly basis.
I was wondering if anyone else has this problem or if people could give me some advice as to how to get over it or something.string wrote:
Maybe someone somewhere should create some sort of "Arch Linux updaters anonymous". "Hi, my name is jdhore and I update my system daily" (others reply:) "Hi jdhore..".
All joking aside, come on, admit it, you don't actually have a problem, you just wanted some Arch Linux community love -- nothing wrong with that, mind you -- it's why I'm here too. "I'm afraid to buy a car because I might be tempted to drive it off a cliff." .. you'd have to have some *serious* problems in order for stuff like that to be credible.
Don't want to break stuff: then don't. Just keep telling yourself that the cake is a lie.
dude...That's exactly why i don't have a car... -
Very strange screen problem (previous app leaves mark)
I'm Danielle, i'm from the Netherlands and i'm having a very strange problem with my iPad mini (bought It August 2013).
never had problems with my iPad, but since a few weeks i have à strange problem with my screen.
when i open an app, for example messages, and i use it for a while, and then return to the home screen or go to another app,the messages app leaves a mark o'n the screen at the left side of my screen (an area of 2 cm from the Side). my english is not very good but im trying to describe it.
I cant make a print screen of iT because its a problem with the screen So you dont see iT on a print screen.
so:
- i see a mark of THE previous screen(app) on my screen
- first i throught iT was: in dutch we call it doorgebrand, translated in english: burn through (dont know if i translated it right). Like a old computer when you are working at a screen for to long so letters and text are printed, permanently, on the Screen (Thats why you have screen savers).
- but: it disapears in a few minutes or if i open a black screen.
- It's not very clear to see (The longer i used the app, The clearer the Mark) and iT has horizontal stripes
i hope someone has experience with this problem or knows what i have to do.
i never heard of this problem before and i cant Find iT on Google.
kind regards,
danielle from the netherlandsA workaround is to turn the brightness down, it may reduce the 'burn in' less & makes it less noticeable.
You should get in contact with Apple ASAP if you consider it bad enough to need repair, it should have a 1 year warranty. I suspect it is considered just to be how it behaves. -
./imsimta version
Sun Java(tm) System Messaging Server 6.1 (built Apr 28 2004)
libimta.so 6.1 (built 12:38:06, Apr 28 2004)
SunOS mail.abc.com 5.9 Generic_112234-03 i86pc i386 i86pc
I faced very strange problem last week regarding the mailbox. I have doubt that must be bug in that release. Previously we were using a single box for multiple domain hosted on it so mailboxes were created like user/[email protected]/INBOX expect the mail boxes for user domain matched with hostname domain. Then we separated one of our domain and mail server was created with hostname like mail.abc.com. All application and services was installed successfully and schema 2 was created at LDAP, as I was migration the users so user�s mail boxes must be migrated as well. Default user mailboxes was created on new box as user/uid/INBOX as domain part was missing so I put all the old mailboxes on the same partition where the default one was created and I manually copy over the contents from old one to new one and run ./reconstruct -m command so users wre eable to see all of their pervious mail and folders. Every thing went fine and well later I issue the ./mboxutil �o to get the orphan mailboxes; output gave me all mail boxes which have @domain part. So I create the file from that list and issue the command ./mboxutil �d �f filename. Oh no! Then seriuos problem occurs as the default mailboxes /usr/uid/INBOX deleted as well and technically they should not be because they were not present in the list. Then I create the mailboxes manually or some was created on reception of mail and I notice the user/[email protected]/INBOX is created as well associated to each user.
So real question is if user/[email protected]/INBOX is linked with default usr/uid/INBOX then why ./mboxutil �o is giving these mailboxes as orphan in the list, if they are not link or associated then why they are created automatically while the new mail boxes created manually or reception of mail.
I will appreciate if any body can help me with these question based on scenario presented above.Youve found a bug with mboxutil -o
I would have suggested following a different path to achieve your goal.
I would have suggested using imsbackup to capture the existing mailboxes you wanted to move, and imsrestore to populate the new server.
the two mailboxes are NOT linked, other than mboxutil is confused.
by running reconstruct -m, you entered them both into the database. I think this was a bad idea.
If you were going to manually manipulate mailbox files, I would have removed the old uid@domain mailboxes before running the reconstruct -m
I would have also run reconstruct -r afterwards. If you had done these, you would not have seen the problem at all.
Maybe you are looking for
-
InfoView Errror - Please wait while the document...
Hello, I am looking for some assistance as I am stumped on this. Very recently we have had an issue come up on our InfoView site when people attempt to run a report a progress windows comes up saying "Please wait while the document is being processed
-
CRM IMG nodes are missing in SOLAR01 - configuration Tab
hi Experts i am facing very strange issue. I am trying to link IMG nodes from the backend system in configuration tab. the IMG nodes are available in backend system from SPRO , whereas when i try to add the IMG object from the configuration Tab in
-
Hi again. Loving this forum. What would take forever to figure out you guys already know! I made a disjointed rollever effect on this page. http://isuckatgolf.net . You'll see in the middle of the page, the white arrows. Right now the arrows swap as
-
Home screen bookmark icons different on IPad 2
I have a question that I hope someone can answer, I've been trying to add bookmarks to my home screen, but their icons are just a snap shot of the web page. I have the same icon on my iPhone home screen, and the icon automatically change to an actual
-
I have four iTunes libraries on my Mac, my main iTunes library, one for Christmas, one for Christian, and one for CDs. Additionally, my husband and daughter each have their own computers with a single library on each. Since we are only allowed 10 de