Video show disaapears when connecting to pc...

Everytime I connect my Ipod to my pc one of my video shows disappears from my Ipod, not from my Itunes.
Waht is going on? How do I get them back on, I have a 30 gb.

Ooo please, someone must know

Similar Messages

  • Video capture stops when connected to FCP using fire wire

    Captured video using Sony VX2000 using 48 khz and 16 bit audio stereo mode. Using Sony Premium miniDV tapes.
    Video plays back fine when not connected via firewire to G4 dual 867 with 2 GB Ram.
    Using default capture preset of 48 khz 16 bit, connect fire wire and video capture randomly stops stating it has lost connection or is missing capture data. If I switch to just plain capture using non controllable device, I have the same issue except the tape keeps playing but FCP stops capturing.
    Tried other tapes and no problem.
    Tried other fire wire cable and no problem.
    I am having problems only on this tape and when connected.
    When not connected it plays back on the camera with no stopping.
    Steve Bowers

    To answer your questions--
    Dumping preferences usually does not cause problems. More likely you updated some part of your system or are having other hardware issues.
    No updates or hardware issues. The original problem (discussed in another thread) was one where the video is skewed inward on the lower right corner. Apple instructed me to dump the preferences and start from scratch. That I did and now I am experiencing problems I did not have before. If it is hardware problems, then I guess it is just coincidental that FCP is just now presenting problems. However, the other problems I am having are software related and does not involve the camera.
    What software versions of FCP, OSX and QT are you running and have you updated any of them recently?
    FCP version-5.1.2
    OSX-10.4.8
    QT-7.1.3
    Is there anything special about the 'difficult' tape?
    No.
    Did you record it?
    Yes
    Was it the last of a bunch?
    Not sure. I buy bulk so this was one in a box of 5 that is was in a case of 50 boxes.
    Are you using the same camera as the playback device?
    Yes
    Does it work if you use another computer?
    Not sure what you mean. I have only one MAC G4.
    Was it recorded using another camera in a non-DV format?
    No. Playback is through same camera is was recorded on.

  • Cannot play the video in powerpoint when connected to projector

    i have linked a video into a powerpoint slide... it played perfectly on the screen. but when connected to projector it cannot be played.
    i am using a macbook pro with Lion OS.
    Thanks!

    I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
    Here what I figured out so far:
    1. It happens when you have PPT open and connect to beamer afterwards
    2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
    3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
    4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
    So in short: Connect to beamer first, then launch PPT
    I know it is only a symptom fix but it worked for me

  • Show error when connect Company Database by DI API in 2004B

    Hi
    I use the DI API to connect company database in 2004B.  I can get the company lists by SAPbobsCOM.CompanyClass.GetCompanyList().
    I write a program to testing the connection that show two different result in client and server side.
    - It show the error -2147221164 (Class not registered), when connect company database in client PC. 
    - The same program run in server, it connected.
    I already checked my config as below
    - SAP 2004B is installed 7.20.145 SP:00 PL:25
    - SAPbobsCOM67.dll is 6.70.188.0 version, and "Special Build Description" is 21.
    The client and server side are same config.
    Any ideas how I should handle this?
    Thanks
      Winson

    sorry! it is wrong posted in here!!

  • TS1363 My iPod Classic is frozen. it does not show up when connected to iTunes

    My iPod Classic is frozen. It will not open iTunes or show up when I open iTunes manually. How do I fix this?

    thanks. I followed all the steps but it said that itouch was unable to connect to itunes because a passcode needs to be entered first, but I'm unable to enter the passcode because the itouch is disabled and all I see is the red message Ipod is disabled. How do I get pass this message to where I can access a keypad to enter code? thanks!

  • Can't get artist to show up when connecting to shared itunes library

    I have been having a problem seeing all of my artists when connecting to itunes on my iphone. I can connect to this shared Itunes library, but when I do I can only see about 12-15 artists not the 1,000's I have. When I go to the songs tab I can see all the songs. How can I see all of my artists again?
    I am using itunes 10.0.1 (on my iMac) and Iphone 5 version 6.0.2.

    In your itunes on the PC, Apple TV 3rd gen does not show up ever this is normal as Apple TV3 does not store any content you can access from the PC
    On your Apple TV to see your PC library, Select Computers from the front screen and it should show your pc library.
    Setting up Apple TV for HomeSharing

  • IPod classic only shows music when connected to computer

    I'm having a problem with my 160 GB iPod classic.  Last week, I had it connected to my car stereo (as I always do), and when I unplugged it to plug in headphones while I was shopping, it said "no songs," apparently everything had been erased.  When I plugged it back in to my macbook, it had in fact lost all my music, and before I could put anything back on, I had to reformat it in disk utility.  Then, I restored and started putting music back on, which took several hours (actually a couple days), because on my computer my music is 320kbps and I have it set to convert to 128 to go on ipod.  When it was finished, I ejected it, and it again said "no songs."  I plugged it back into the computer, and it shows all the songs, and allows me to play from the iPod in iTunes.  Has anyone else had this problem?  It seems to be working fine when connected, but on its own, nothing.  I use a macbook, and this is the only computer I connect it to (and it is not set to sync automatically).  Battery is fully charged.

    Looks like your car stereo, may have damage the hardisk, due to unreliable power supply or hard bump.
    Do a disk diagnostic, here is the old post by regular contributor -tt2.
    https://discussions.apple.com/thread/2362776?start=0&tstart=0
    Good luck!

  • Listing of apps not showing up when connecting iPhone

    When iPhone is connected to Macbook Pro, app listing doesn't show up to edit etc, screen shots show up on the right side, but no list on the left of apps .. please advise .. Thanks
    PS .. when connected to PC laptop, list of apps shows up on left side ..

    Are all apps on your iPhone available in your iTunes library on your MBP?

  • Camera does not show up when connected to Macbook Air

    I'm connecting my Sony NEX-F3 to my new Macbook Air for the first time.
    When connected via USB the screen on the camera says to 'Check the connected device'. On my old Macbook the camera would autmotically appear on my desktop however this one is not responding at all. I have checked Disk Utility & Finder to see if it has appeared there instead but no luck, any advice?

    This is a new computer? Why not take it to an Apple store and have the techs there work on it. I would take the camera and hard drive along so they see exactly what you see.
    The service is free. But make an appointment:
    http://www.apple.com/retail/geniusbar/

  • Crystal Report not showing fields when connected to a stored procedure

    I have a Stored Procedure that returns results when run in SQL Server, but when I add this to a Crystal Report it doesn't show any fields in the Field Explorer. But if I try any other SP, it works fine and I can see its fields.
    As you can see in the picture below, I am unable to expand the fields in the report while creating the report using standard report procedure too.
    I tried different ways, but nothing worked for me here. Please help me here.
    (FYI, I am using Crystal Reports 2008, SQL Server 2008R2)

    Hi Jamie,
    I just found out the reason for this issue.
    I wrote the stored procedure using the fields in the Datamart but the fields in the datamart in backend are connected to a different database which doesn't have SQL Server Authentication (for the Credentials) and that's the reason I was getting this issue.
    Once my BI team granted the permission, for that fields connecting to the backend database, I was able to see all fields in the Crystal Report.

  • Ipod 160g music library shows up when connected to itunes, but empty when disconntected from computer

    At some point last night the mac i had connected to my ipod 160gb went to sleep and when it awakened, I ejected and disconnected ipod, instead of going right to the music menus, the ipod restarted, and opens up the language selection screen, as if it is empty.  There are 0 music files, 0 videos, playlists etc., actually it even says 0 KB available.
    When i reconnect to my computer i have access to my ipod library on my ipod like normal.
    I have tried doing the hold switch toggle and then holding menu/select until the apple icon appears, at which point it restarts, but the ipod still appears without any access to the music.
    My ipod is set to sync manually, i.e. i dont have it backed up on itunes.

    It is a big risk to keep your only copy of song files on an iPod.  It can become lost, broken, or in need of a Restore.  That's what your iPod probably needs now, a Restore.  There is probably data corruption on the iPod's storage.
    Your computer seems to still see the song files on the iPod, so you may be able to off-load them to your computer's drive.  You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store.  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like "ipod transfer," you should get some links.  (The CNET article seems to be popular.)
    Once the song files are on your computer's drive, add them to your current iTunes library.  Then (after confirming all of your songs are there), do a Restore on your iPod.  The Restore button is on the iPod's Summary screen in iTunes.  This will erase the iPod, reinstall its software, and set it to default settings.  You can then sync your songs back to the iPod.
    Going forward, you should keep all of your songs in your iTunes library (not just on the iPod).  And then back up your iTunes data on the computer, along with your other valuable personal data, to protect against your computer failing.

  • Focusrite Saffire does not show up when connected to Imac by Firewire 800

    When I connect my focusrite saffire to my i7 imac 27" via the firewire 800 port, the device does not show up on the computer, however it does light up indicating it is being powered off the firewire. When I click on "about this mac<more info<firewire", all I see is this " Maximum Speed: Up to 800 Mb/sec", I have checked and my "AppleFWAudio" file is up to date. The Focusrite uses Firewire 400 but I use an adaptor which converts it to 800, I have tried different adapters and cables from a number of companies which were suggested by Focusrite themselves and none of them worked.
    Any ideas on what the problem could be?

    I too was having problems connecting my Focusrite Saffire to my new iMac 27" i7.  It would light up and click several times, but it would never be in a ready state w/ both LINE indicators being green.  The Saffire Control software would say the the Saffire DSP didn't load and to unplug it and re-plug and wait for the lights to turn green, but that never happened.  I called Sweetwater (where I bought the unit) and they didn't seem to know of any prevailing issues, BUT the tech did suggest to reboot the iMac in 32 bit mode (hold down the '3' and '2' keys during startup).  I did that and replugged the Saffire but it exhibited the same problem.  I unplugged it and left it for like 3 minutes then reattached the firewire cable and it mounted.  I opened up the Sound preferences and was able to select it and get sound out of it.  I then opened DP and ran a quick test and it worked as well.  The next test was to reboot into 64 bit mode.  I did that while the Saffire was still connected and it actually stayed mounted and connected upon reboot.  I have my System Sound output running through it right now and its still working.  I haven't tried DP yet, but will do that later.  I'm not going to reboot again until I hear back from Focusrite.  I sent in a help request last night. 
    Hope this helps someone.

  • Automaticlly "Show Details" when connecting to Remote Dekstop Machine

    here has been several occasions when I have waited for a remote window to connect to a machine until the MSTSC window disappears with no message.  Each time, I find that it is due to a message that would have been easily rectified if I had noticed
    that I could press the "Show Details" button (sometimes, it is greyed out at the beginning of the connection).
    Is it possible to have this expand automatically when available, and how would this be accomplished?
    Thanks

    Hello Keith.E.Kelly,
    What do you mean about ‘show detail’? Show Options?
    Please share us a screenshot about grey out ‘show detail’ button.
    If you mean the Options in the screenshot mentioned above, I go through
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services
    in local group policy editor, but can’t find any project to enable it.
    About the group policy issue, it is recommended to ask in the TechNet Group Policy forum.
    https://social.technet.microsoft.com/Forums/Lync/en-US/home?forum=winserverGP
    As you have the problem about “MSTSC window disappears with no message”, the computer has this issue when it tries to connect to any remote computers?
    Please open the Local group policy editor and go to Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits\End session when the time limits are reached,
    disable it and check if the MSTSC windows disappear again.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Belkin UPS does not show up when connected to MacPro via USB

    I have just replaced my aging DP G4 machine with a MacPro. I added a UPS with a USB connection. It was advertised as being Mac compatible.
    After many tries to get the horrible Belkin software to work, I gave up. The worst part is that The UPS will not show up even in the Energy Saver preference pane.
    I checked if the USB connection is working OK on the UPS and it seems to work, although it reports itself as "Cypress Semiconductor Serial to USB" in the System profiler.
    Any ideas of what I could try to get this to work? As of now, it I am not around to shut down the machine, the battery backup is useless...

    I can't offer any real help here other than to say that the Belkin UPS does work with a Mac Pro. I was running one on my G5 and when I replaced that last week with a Mac Pro I simply plugged it in and it worked.
    I have never tried to use the Belkin software; I read somewhere on these forums I think that it's rubbish and because OS X supports UPS out of the box I have always relied on that.
    I am connected via USB. The Energy Saver UPS panel simply shows the UPS name as "UPS", and in System Profiler itsimply says "Belkin".
    BTW, I also have a Belkin UPS on my wife's iMac and it does exactly the same.
    I know they work because we have had power outs here and the UPS devices have kicked in just fine.
    I am guessing—but this is only a guess—that you may have some remnants of the Belkin software still on your system and that this may be interfering with Energy Saver. I would maybe try to do a finder search (apple+F from the desktop) for "Belkin" and see if that shows anything. Maybe ask Belkin what gets installed so you could check it's all gone?
    David

  • HT204406 iTunes Match not showing up when connect to my vehicle.

    I have iTunes match turned on on my iPhone 4S, and the songs show up on my device for the most part, but when I connect my phone to my vehicle via USB, it says there are no songs to display. Is this an iTunes issue that they will address, or is a permanent problem that I will not be allowed to listen to my music via USB connection to my vehicle?

    I have the same issue. My home shared library can all be seen on my iPhone or my Apple TV 3rd Gen but not on my ipad. Only some movies and tv shows show up. Also. Many of the TV shows are all mixed up. Episodes shows up in different series and all mix up. All those issues only on the iPad, on other devices, all seems fine.

Maybe you are looking for