Video size problem

Just started using Premiere pro cs4 and when ever I import a video it is very small (http://tinypic.com/r/2s6q88o/4). I've been using a older version for a while. If it matters I am filming with a Canon Gl1.
Thanks

I was able to see the screendump.
And indeed not the correct sequence setting:
You either choose Standard or Widescreen.

Similar Messages

IPod Touch/iPhone 4s in a BMW - Screen size problems while playing videos since iOS5

Hi,
I have an iPod Touch 4th generation 64GB that i use connected to my 2011 BMW M5 purchased with all multimedia and iPod/iPhone options available from factory.
The car lets me play music and video playlists from the iPod and the videos can be seen on the BMW iDrive screen, when i was in iOS4 everything worked perfectly, but then i updated to iOS5 and one problem arised and then updated to iOS6 and now to iOS6.1 but the problem still persists, basically the problem consists that sometimes video size and aspect ratio of videos displayed in the car display are wrong, and some times the same videos are displayed correctly. It is just random, sometimes is OK and sometimes it is wrong, but when it starts to display wrongly, all videos following are displayed wrongly.
After trying everything i discovered that while a video is playing with wrong size and aspect ratio, i can correct this behavior, sometimes manually unlocking the iPod and entering the "Music" app and exiting, and sometimes entering the iPod configuration and exiting, just entering and exiting, and sometimes doing both of them one after another. This is a temporary sollution because it is really disturbing to do this process while driving with the iPod inside the cradle in the armrest. I wish i could downgrade to iOS4.1 where i was before and everything worked perfectly, as there are no new features i care in iOS5 or 6.
I tried restoring the device in iTunes... 5-6 times in total since iOS5 release, tried using an iPhone 4s with iOS6 and the same problem happens, so obviously it is a bug present in latter iOS that it is not initializing correctly the screen when requested by external accessories.
you can see in this BMW forum other people with the same isue: http://www.bimmerfest.com/forums/showthread.php?t=602131
I can provide photos or testing if needed
Thanks and excuse my english.

You say your turning it off does that mean you are holding in the sleep button and sliding the unit off or does it mean you are just locking the unit with the screen off?
If you have the Wifi enabled and only have the IPT in standby mode then this is why it's depleting the battery so quickly. Charge the unit till it's full with the little plug showing and then eject it and turn off wifi and leave the unit in standby overnight and see if the battery depletes at all.
I've noticed that Wifi really ***** the life out of the battery very quickly so give it a try and report back to us.

Problems whit video size

Hello again!
Ok am not going to drift in lines this time so am just going to the point right away..... I was able to construct a video player subvi in such a way that I don't really need flags and stuff (you know as simple as possible).... I want to use it to play videos in a single size and my problem is that am not able to keep the video player in a fix size the player insist in changing size to accommodate the video is playing ... ok to be more clear about it lets say I want to keep the size of the video player in 888 for the width and 540 for the height ... I wasn't able to attach one of the videos am using is says is to big for it sorry
Really appreciate assistance here !!!
W@R
Attachments:
video con size acomodado.vi ‏27 KB

Ok maybe am phrasing the question in a wrong way.... what I want to say is:
I know who to set a size to the ActiveX control of the WMP by using the "bounds" property node I set the size at let's say 604 for height and 750 for width now if you run the vi that I have attach you only need to add the "bounds" property node in the event case or the block diagram, either way works, for it to set the size of the WMP...... then when you load a video the WMP take the size of the video that is playing at the time.... Ex, video size 430 height and 550 width... that would be the viewing size... I don't want that I want to force the WMP activeX control to maintain a specific size and not change regardless of the video's original size ...... please please help me if you can

Using a function to change Netstream video size.

Hi folks,
forgive me I am new to script in Flex. I got an Application that has two scripted functions. The first is called at creationComplete and sets up a netconnect/netstream video playback. And a second that is fired when a button is clicked, which sets the application to Full Screen. What I want to do is resize the video at the same time. For testing purpose I am using hard coded values that match my monitor size.
The problem I am having is that the code I wrote to change the video size spits out an error "1120: Access of undefined property vid." - Is it possible to have one function access the vairibles of another function?
My code:
<mx:Script>
        <![CDATA[
            private function initApp():void
                var nc:NetConnection = new NetConnection();
                nc.connect(null);
                var ns:NetStream = new NetStream(nc);
                ns.addEventListener(AsyncErrorEvent.ASYNC_ERROR, asyncErrorHandler);
                ns.addEventListener(DRMAuthenticateEvent.DRM_AUTHENTICATE, DRMAuthHandler);
                ns.play("gm.f4v");
                function asyncErrorHandler(event:AsyncErrorEvent):void
                    // ignore error
                var vid:Video = new Video();
                vid.attachNetStream(ns);
                vidUI.addChild(vid);
                vid.width=851;
                vid.height=480;
                function DRMAuthHandler(event:DRMAuthenticateEvent):void
                    ns.setDRMAuthenticationCredentials("test","test","drm");
            public function goFull():void
                stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
                vid.width=1920;
                vid.height=1080;
        ]]>
    </mx:Script>
I want the function goFull to change the video size that is loaded from the initApp function.... possible?
Cheers!
Chris

altering size of text already in a textfield:
var fmt:TextFormat = new TextFormat();
fmt.size = newvalue;
textfield.setTextFormat(fmt)
textfield.defaultTextFormat = fmt; // ensure that text typed after the change is same size

Final Cut Pro X Exported Video Size

I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube. I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube. There doesn't seem to be this option in Final Cut, so I've taken to using the YouTube share feature but it never uploads so I just manually upload the .mov file that it saves somewhere in the Final Cut shared files folder.
The problem I have is that I export a 720P file so assumed that the video size would be 1280 x 720, it always was with iMove. I've found that Final Cut spits out the video at 1248 x 702 and this is quite annoying as it sometimes cuts off the top and bottom of a video. Is there any reason why it does this or any way to get it to export at the correct display size?

How can I change the size? Normally I export at 720P in iMovie and the video and format are both 1280 x 720. I did a screencast using Quicktime and due to the change in display size it's chopped off the toolbar at the top and a small portion of the dock. I've had to resize the clip in Final Cut to 95% of the original size to get it to fit in the 1248 x 702 size that it chooses to put it in.
As this was only a screencast the file size tends to be this small, but normally I shoot at full HD on my camcorder and the video can be about 10 mins in length. I used the export media function and the resulting file was about 8GB in size! iMovie would typically give me a .mov file anywhere between 700MB - 1.5GB depedning on the length of the video and that suited me fine, but there doesn't seem to be any way to get it that small using the Export Media. Not much of a problem really coz I'm fine using the YouTube share option to get what I want.

Maximum Video Size in Flash??

Hello,
I'm currently working on a website design. The idea is a big chromakeyed interactive video in Flash. The size of the video is 1080 (width) x 1500 (height) pixels.
I've exported the video in After Effects with the standard settings for flash (File>Export>Adobe Flash Player(SWF)). Now when I import the video in Flash and preview the file, the video plays in a slower speed and it's not playing smooth at all...
Is the video too big? Is there a maximum video-size to keep the video running correct in Flash? Is it something else that causes this problem..???
I hope one of you guys can help me with this, hope to hear from you soon!

Could be a mismatch of frame rates. For example, if you are using 30 fps in AE and 24 in Flash, and then you embed the video into the time line, it will play at 24 fps, slow and jerky.
However if the video file was a .flv and you played the video by NetStream or FLVPlayback, it would playback at 30 fps, even if the Flash doc had a fps of 24.
If that doesn't fix it, try exporting the file from AE as an flv.
Best wishes,
Adninjastrator

Video playing problem

I m experiencing serious video playing problem unable to play avi files of size 150mb above as i have downloaded titanic n was unable to play it!!!!! Pls look in the matter

hi mate, what device are you using, and what have you encoded the bitrate and audio codec of the video?

End video size

hi,
i want to use imovie for some basic editting and rendering.
i have a load of mov's, captured using snapz pro x at 720x480 that i simply want to import, cut bits out, and export as one file for use in idvd.
i have 2 questions...
1. is there a way, in imovie, to change the end video size? im using 720x480 source files, and when i export as a movie it either crams it into a 640x480, or letterboxes it. i just want the output size to stay the same as the input size (720x480). if not, whats the optimum size people use for tv viewing?
2. the content of my video is pretty intricate. its got a feint grey box in the middle of the screen, which the video plays in (screen in screen basically).
assuming that imovie will only give me 640x480 output, i cropped the clips to 640x480, inputted them, pieced them together, and outputed them. imovie gives me the right size, but really messes up the video. the grey line is blurred and not visible at the bottom, and the moving images themselves look awful.
all i want is to export a video that has the same properties (size, resolution etc) as the input files!
if screen grabs would help, i can put some up.
thanks in advance

yes, i've had varied success with transferring screen grabs to tv. problem is, its the only option - im using a moving image enivronment (pure data) and the only way to save the video you create is through snapz (well, theres no way of saving it within the software).
one way i will try is to video out from the laptop into a tv and record with a dvd recorder, see if that helps.
i think its trial and error with the captures. the 720x480 looked pretty good, but the refresh rate was out and it flickered a fair bit. the refresh rate was better on 640x480, but it didnt look as good.
thanks for the advice

Join video with diferent video size

Hi, I have this problem, I use QuickTime Pro to join clips in one large/single Mp4 file, some clips have diferent video size and when you join them a white space appears in the video, this example is from ''Peter Ganriel - Play The Videos: http://www.vendocasalasaguilas.com/QuickTime.JPG
What I need is how to center the video and dissapear or convert the white space in black space
Anothe question: when I play a Mp4 in QuickTime in MAC and then the same Mp4 in PC I see a lot of diferent in video quality, in MAC is much better the video quality, my question is there something to do to improve the video quality in PC or not.
Thanks in advance

Open the Movie Properties window and single click on a video track to highlight.
In the lower half of the window click the "Visual Settings" tab.
This is where you adjust dimensions, offset and track layers. Make either one track smaller or the other larger to help "align" them.
Default add uses an offset of 0,0 (upper left).

ITunes 'Video Size' option not available.

My earlier version of iTunes was getting cranky and stopped working earlier today. I took it off the box and reloaded the new version. It works fine except for this one thing noted above. My videos always fill the window now, no matter their original size was. With some older vids, this can be quite annoying as they get too blurred. When I check the the 'Video Size' option, it's greyed out and unavailable. I can't get the option when I'm watching the video either.
BTW, I'm not having this problem in QuickTime.

This is an old thread, but in the latest iTunes, edition 10.4, I found myself unable to use the keyboard shortcuts to change the size of the video from iTunes.
I dug around and found no way to get that feature to work.
What does work, though not as easily (I do prefer shortcut keys), is to right click in the video window to show the options (you do have to do it several times should the first request not change the size as much as you like). Otherwise, you can just click and stretch or shrink using the bottom right corner tool in Snow Leopard or any corner in Lion.

Video sizes provided by the device not supported.

Hey guys,
I am trying to use FME to run a live broadcast of my desktop
PC on www.justin.tv. I have an 8800GT with forced s-video out on my
desktop, running to an HP ExpressCard TV Tuner on my HP Laptop. The
TV tuner lights up when it is plugged in, and I can receive video
via Windows Media Center (while browsing for TV signals, satellite
then svideo input) so I know that part is working. I'm trying to
use FME to pick up this input (like a capture card) from my desktop
and broadcast it on justin.tv. However, it seems like no matter
what I do, it always reports "unexpected problem encountered" and
says "video sizes provided by the device not supported."
Do I just have to bite the bullet and get a real capture
card, since this TV tuner is probably incompatible? I heard
something about FME needing raw video for input, rather than
something encoded, and I think this tuner encodes into MPEG
something or other automatically. Could someone suggest an
affordable and easy to use capture card for someone with limited
technical knowledge that will work flawlessly with FME?
Thanks for your time!
-Cameron

Then your Canon video camera is not really HD to the core
definition. It seems Canon (and everyone else for that matter),
tweak their statistics in order to say something to help boost
sales-and it works for them.
Use the DV option and you can stream live to the best of
your little canon's ability. The only sizes that pop up on your
select a size list, are the sizes that that camera can handle.
3.0-don't hold your breath thinking that 3.0 is going to
solve too many problems. Remember, it's still a free platform, and
Adobe or anyone else-will only give so much away for free. The
trick is to buy the $4,500 version and the World is yours.
Anyway, good luck Monty!
Happy Holidays,
Dirty South TV

T60p XP video driver problems

Hi,
Just had to reformat and reinstall my T60p, and have put XP SP3 and the lenovo ATI video driver v8.533 on. Since then, I've had intermittent video redraw problems - parts of windows not being redrawn when minimising / maximising. Seems to affect all applications, and there's very little else installed other than a couple of portable apps.
It seems that sometimes the video performance is really really bad - windows leaving trails behind them when being dragged across the screen, just like an unaccelerated video driver would. And various rectangles of windows failing to be redrawn completely.
But sometimes, its working fine - I can't see a pattern to it (yet). I've tried reinstalling the driver from a fresh download, and I've tried disabling acceleration in the troubleshooting section of display properties, with no effect. And there doesn't seem to be anything in CCC which helps, but for info, here's what it says:
[Software]
Driver Packaging Version   8.533.3.1-081110a-075168C-Lenovo
Provider   ATI Technologies Inc.
2D Driver Version   6.14.10.6860
2D Driver File Path   System/CurrentControlSet/Control/Video/{C962D8EE-828D-4B2B-8AC5-A2254A69BD2C}/0000
Direct3D Version   6.14.10.0612
OpenGL Version   6.14.10.7980
Catalyst® Control Center Version   2008.1110.2145.39024
[Hardware]
Primary Adapter
Graphics Card Manufacturer    Powered by ATI
Graphics Chipset    ATI MOBILITY FireGL V5200
Device ID    71C4
Vendor    1002
Subsystem ID    2007
Subsystem Vendor ID    17AA
Graphics Bus Capability    PCI Express
Maximum Bus Setting    PCI Express x16
BIOS Version    009.012.001.021
BIOS Part Number    BK-ATI VER009.012.001.021.025044
BIOS Date    2007/05/02
Memory Size    512 MB
Memory Type    HyperMemory
Core Clock in MHz    398 MHz
Memory Clock in MHz    324 MHz
Anybody got any ideas? Are there any later drivers available? I wonder if its related to the screen rotation fix for SP3?
Thanks,
Dave.

Yes, that's the link I got the video driver from.
I tried downloading the bios flash utility from your link anyway, but it said I already had the latest version (which is what I thought), and didn't need to update. I confirmed this by booting into the bios config screen, and it definitely displays ...3WW there. I must admit I had assumed the bios details from CCC were for the GPU bios, not the machine's bios. But I couldn't find any references to updating the GPU bios.
To confirm, here's the full output from the System Info button within CCC, which displays the machine's bios details:
OS Name    Microsoft Windows XP Professional
Version    5.1.2600 Service Pack 3 Build 2600
OS Manufacturer    Microsoft Corporation
System Name    LAPTOP
System Manufacturer    LENOVO
System Model    2007FBG
System Type    X86-based PC
Processor    x86 Family 6 Model 14 Stepping 8 GenuineIntel ~1995 Mhz
BIOS Version/Date    LENOVO 79ETE3WW (2.23 ), 12/09/2008
SMBIOS Version    2.4
Windows Directory    C:\WINDOWS
System Directory    C:\WINDOWS\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name    LAPTOP\xxxxxxxx
Time Zone    Romance Daylight Time
Total Physical Memory    1,024.00 MB
Available Physical Memory    398.70 MB
Total Virtual Memory    2.00 GB
Available Virtual Memory    1.96 GB
Page File Space    2.40 GB
Page File    C:\pagefile.sys
Thanks,
David.

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Video size problem

Similar Messages

Maybe you are looking for