Video tag controls not working.

Hi,
I have a HTML 5 video tag in a page,
Play/ Pause for the video is working in Chrome/Firefox, But in case of I.E. it does not work.
The code is:
<video style="width:100%; height:100%" class="videoPlayer" controls="controls" runat="server" id="video1" onclick="this.play();">
</video>
Do I need to add extra code for Play/Pause for I.E.?
Thanks,
Vinay

Hi Vinay,
I think this is what you need.
Using JavaScript to control the HTML5 video player
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Video tag is not working in firefox how can we remove this error

Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?

Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
Do they work here?
*Firefox Videos: http://www.mozilla.com/firefox/video/
See also:
* https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements

Captivate 7 event video playback controls not working

Hi,
I'm using Captivate 7 and published an mp4 event video with limited playback controls (only play, pause, back, and close) on the slide, since the event video controls won't show up once published. When I publish the HTML5 video (with or without seamless tabbing) the controls are not working. When I click play the video plays and I can pause it, but when I want to continue play, the controls are not working.
I tried only to use the skins (clear, corona, and halo) given with the event video, but then I can't pause the video at all, since the controls are not showing.
We need the video to play in HTML5 mode for iPads and computers, but we're at a loss with the controls. The video has got to be limited to only play, pause, back, and close - no scrubbing or forwarding. Any ideas?
Thanks,
Nat

I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth

HTML5 video tag is not working in IE9

Hi
the bellow is the code
<video width="320" height="240" controls>
<source src="NewFolder/Wildlife.mp4.mp4" type="video/mp4">
<source src="NewFolder/movie.ogg" type="video/ogg">
Your browser does not support the video tag.
</video>

This is the TechNet Forum for questions regarding Internet Explorer 8, 9, 10 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions.
For better assistance please ask for help in the MSDN IE Development Forums.
Thanks & Regards,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile

Video playback controls not working properly

video
I put a video into edge and it works but the player controls don't show up when you roll over any part of the movie they only show up if you roll over a specific area at the bottom of the video, A very small area. I want them to be there either always or when the user rolls over any part of the video. I attached a link of the video.

I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth

DVI video out suddenly not working.

That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.

there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari

JDBC control not work after upgrade application from workshop 8.1 to 9.2.3

Hi,
We upgraded application from workshop 8.1 to 9.2.3. After that, the JDBC control not work any more. We got the following exception:
java.sql.SQLException: The transaction is no longer active - status: 'Committed'. No further JDBC access is allowed within this transaction.
at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:192)
at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:202)
at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:87)
at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:435)
at org.apache.beehive.controls.system.jdbc.parser.SqlStatement.createPreparedStatement(SqlStatement.java:128)
at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:272)
at com.bea.wlw.runtime.core.control.internal.JdbcControlImpl.invoke(JdbcControlImpl.java:136)
at controls.SecurityBean.getUpdateDocPermission(SecurityBean.java:598)
at security.SecurityManagerImpl.getUpdateDocPermission(SecurityManagerImpl.java:110)
at security.SecurityManagerBean.getUpdateDocPermission(SecurityManagerBean.java:509)
The control that throw the exception has "transactionattribute" annotation added automatically by upgrade wizard during upgrading. Related classed are as follows:
@ControlInterface()
public interface SecurityManager
@TransactionAttribute(TransactionAttributeType.REQUIRED)
boolean getUpdateDocPermission(java.lang.String userId);
@ControlImplementation()
public class SecurityManagerImpl implements SecurityManager, Serializable
* @common:control
@org.apache.beehive.controls.api.bean.Control()
private controls.Security security;
static final long serialVersionUID = 1L;
* @common:operation
public boolean getUpdateDocPermission(String userId)
if ( security.getUpdateDocPermission(userId) > 0) {
return true;
else
return false;
@ControlExtension()
@JdbcControl.ConnectionDataSource(jndiName = "EventDesk")
public interface Security extends JdbcControl
static final long serialVersionUID = 1L;
* @jc:sql statement="select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;"
@JdbcControl.SQL(statement = "select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;")
int getUpdateDocPermission(String userId);
Thanks for your help

Hi. The issue is a level or two above JDBC. I suggest
opening an official support case. It's probably a
WLW issue.
Joe

Stereo video recording is not working after updating to ICS

hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.

As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

Sound control not working on my blue tooth keyboard

sound control not working with my bluetooth keyboard

UAVPilot,
Thank you for the information. I do show that the device and car are capable of this function. I do not show any reason you should not be hearing the notifications. One thing you will want to check is that the sound for both your notifications and media are turned up. Also you can look into going into Settings>Apps>S voice Drive Mode> Clear Cache. This should clear any possible bugs in the application. Please keep us updated on this and we can check on other options.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

Video tag controls not working.

Similar Messages

Maybe you are looking for