View this link and solve my issue PLS!

Since no one has answered my question, I am providing a link
that may shed some light on my issue. When the link opens the four
panels will animate. What I don't want is for them to animate at
the same time. What I do want is to animate in a sequence, 1, 2 , 3
, 4. I've tried using the timeline to solve this issue but the
animation goes haywire. PLS, oh PLS can someone help me?
http://img135.imageshack.us/my.php?image=ccbackupsite8ma.swf

Wynterian,
Without seeing the actual file, and taking a guess here, I
would take each link and turn them into seperate movie clips or
place them all in one movie clip and then place them into the main
movie. But, I would offset in the timeline each movie clip by
however many FPS you have your movie. For example, if your movie
FPS is 25, link one would start on frame 1, link 2 would start on
frame 25, link 3 on 50, and link 4 on frame 75. This would make for
a one second interval between each link opening on your main movie.
Hope this helps!
Tegan

Similar Messages

How to update this query and avoid performance issue?

Hi, guys:
I wonder how to update the following query to make it weekend day aware. My boss want the query to consider business days only. Below is just a portion of the query:
select count(distinct cmv.invoicekey ) total ,'3' as type, 'VALID CALL DATE' as Category
FROM cbwp_mv2 cmv
where cmv.colresponse=1
And Trunc(cmv.Invdate) Between (Trunc(Sysdate)-1)-39 And (Trunc(Sysdate)-1)-37
And Trunc(cmv.Whendate) Between cmv.Invdate+37 And cmv.Invdate+39the CBWP_MV2 is a materialized view to tune query. This query is written for a data warehouse application, the CBWP_MV2 will be updated every day evening. My boss wants the condition in the query to consider only business days, for example, if (Trunc(Sysdate)-1)-39 falls in weekend, I need to move the range begins from next coming business day, if (Trunc(Sysdate)-1)-37 falls in weekend, I need to move the range ends from next coming business day. but I should always keep the range within 3 business days. If there is overlap on weekend, always push to later business days.
Question: how to implement it and avoid performance issue? I am afraid that if I use a function, it greatly reduce the performance. This view already contains more than 100K rows.
thank you in advance!
Sam
Edited by: lxiscas on Dec 18, 2012 7:55 AM
Edited by: lxiscas on Dec 18, 2012 7:56 AM

You are already using a function, since you're using TRUNC on invdate and whendate.
If you have indexes on those columns, then they will not be used because of the TRUNC.
Consider omitting the TRUNC or testing with Function Based Indexes.
Regarding business days:
If you search this forum, you'll find lots of examples.
Here's another 'golden oldie': http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:185012348071
Regarding performance:
Steps to take are explained from the links you find here: {message:id=9360003}
Read them, they are more than worth it for now and future questions.

Cannot view attachments and other noob issues

Hello,
I'm completely new to blackberry, and am quite confused. Let me apologize in advance, as this is long and this device is much more involved than any I've had before.
When I receive an email with an attachment(in this case, I sent myself a .doc file to test it out from a yahoo account) I get the "Attachment type cannot be viewed on your device".
I just recieved my BB Tour today, and was able to set up the email rather easily as it is on a POP3.
I have activated the Documents to Go service, it appears that I have the viewer(I followed instructions to check it from another thread for the Curve I believe, and it appeared under Core Applications, so I'm not sure if that actually applies to the Tour, but I found what I think I'm supposed to have under setup/advanced options/applications and then viewed under 4.7 Core Applications under modules net_rim_bb_docview).
I have tried the restarting the device, but no luck. I installed the desktop manager, and followed the instructions to install/update everything.
So far, I've got about 4 hours into this by trying to read through previous posts and the support site, which is wearing on me.
Since I just got it today, is it possible there is some type of lag? I did get an activation message that had instructed me to Leave Messages on the Server, which I did, so I think I'm activated as I'm getting email and can send. But, again, being new to this, it's all a bit overwhelming and has me thinking I should have just activated the data package with my Motorola Q. I'll keep toying with it, to see if something clicks.
Could someone also direct me to a Blackberry 101 type guide? I haven't found the user manual very helpful as I can't even find in it if I can set how often it checks for messages, or if there is a way I can set it to check every 5 minutes or only on demand. So, if anyone can point me in the right direction, I would be grateful! Also, need to update my contact list from Microsoft Outlook, but no luck in finding out how to do that successfully either.
I know that this is a whole lot in one message, but thank you for indulging a newbie.
Message Edited by bbtournoob on 08-27-2009 10:24 PM
Solved!
Go to Solution.

Hi and welcome to the forums!
Sorry there really isn't a 101 for the attachment service.
http://na.blackberry.com/eng/support/blackberry101/
This will help with the basics!
Don't think of one whole email and attachment being sent and received on the Blackberry as one item.
You are drawing in the document and attachments in "segments", if you think of that, it will make the articles
a little easier to read.
Two things first.
On the BB go to options, advanced options, applications. Scroll down to Blackberry Attachment service.
Highlight, don't click, menu key, edit default permissions, set all to allow. Save and go to the main message queue.
Menu key, options, general options, scroll to auto more set to yes.
Now the application is there, the defaults are set, the email address is set to automatically request the whole document.
Lets check the email setup.
Go to options advanced options, Host Routing Tables, click to enter. DO NOT click on any listing.
Press menu key, and select register now. You will get a registration verification message.
Then go to email settings and send service books. I recommend logging in via PC into the carriers BIS site.
(If you need the link to the correct site, send me the carrier name)
You will get an activation email per account. See if the problem is fixed.
If not, then we go into the Yahoo settings. In the mean time, here is some light reading material on the subject!
Just go over it and see how much applies to you and we can discuss it, OK?
Let us know how it goes!
Thanks,
Bifocals
KB13278 How to save attachments from the BlackBerry Internet Service to the BlackBerry smartphone
KB10613 Unable to open an attachment using a BlackBerry Internet Service account
KB15503 Attachments larger than 3.1 MB sent to integrated Yahoo! Mail accounts are not viewable on the BlackBerry smartphone
KB03265 Supported attachment formats for the BlackBerry Internet Service
KB16362 Supported versions of Documents To Go
KB16408 How to edit a document using Documents To Go on a BlackBerry smartphone
KB10473 Unable to open attachments on the BlackBerry smartphone
Message Edited by Bifocals on 08-27-2009 10:30 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Database link and remote connection issues..

We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
Here are some of the errror message we get in our script...
ORA-03114: not connected to ORACLE
ERROR at line 1:
ORA-02068: following severe error from DMVAIS
ORA-03135: connection lost contact
Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

What version of Oracle?
What are the values of the following database parameters?
open_links max # open links per session
open_links_per_instance # open links per instanceAny chance you are exhausting one or both these parameter values?
Have you ran a check on the network connection between the two machines?
HTH -- Mark D Powell --

HT204291 The audio comes through my speakers fine but there is no image of the film or TV Show on my flatscreen . Has anyone had this problem and solved it?

The audio is coming through my speakers fine, but there is no image of the TV Show or Film. Has anyone else had this issue and solved it?

I had the same thing recently when trying to play a video held in my itunes movies folder on my Macbook pro, through the Apple tv airlink to watch on my TV. I could hear the sound play back fine, but there was no picture/video.
It then dawned on me that the 'Apple tv' box can only show 720p resolution, and I was trying to play back a full hd (1080) video. I converted my footage to 720 (or apple tv version), and it now streams and plays perfectly from macbook to AppleTV.

CCP services ( Service Link and Request Center ) Issue

Hello Friends,
Recently i was install CCP on server and i successfully installed it w/o any error.
But when i trying to run those two sevices ServiceLink and RequestCenter from bin folder , i could not see those services in my service folder.
Does anybody know what's the reason for this issue...??
Please share yr information....i appreciate you...
Regards,
Krupesh

Dear ,
Account assignment in service lines are stored in table ESKL
Table ESKL has no accounting fields (Cost center, order, etc.)
The accounting objects (cost center, order, etc.) are stored in table EBKN
The link between EBKN and ESKL is established via the pointer stored in field EBKN-ZEBKN and ESKL-ZEKKN
The limit assignment can also be found in table ESKL with EBAN-PACKNO. ESKL-INTROW = 0 for limit item.
Where as you will find the link between PR no. and HPACKNO in table ESLH
For more chek this link
http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-SRV-ACCAccountAssignment
Edited by: redriver on Feb 17, 2012 2:02 PM

VB Script to connect to Windows Servers (2000/nt/2003/2007) machine and Solve Performance Issues

Hi,
I am looking to develop a vbscript to connect to Remote Windows Server and solve the problems related to
CPU Utilization being high and Disk is running out of space.
I am planning to call that vbscript from a c# application.
Please help me with your expert inputs.
Thanks and Regards
Subhash

Could you please let me know the things to consider while solving the Disk is running out of space and cpu utlization problem.
There are way too many possibilities to list, especially without knowing the specifics of your systems.
Here's a link to the Scripting Guy's forum, but I highly suggest thinking through your question more thoroughly before posting there. As well, you'll need to post your current script.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc&brandIgnore=true&page=1
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Error: Couldn't unmount disk -- when trying to verify/repair external hard drives. Has anyone had this problem and solved it?

I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long. When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly. I haven't unplugged it any of them. When I try to run very/repair disk before they disappear I get the error in the subject line above. Has anyone had this problem and if so how did you rectify it?

The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

HT6001 "BtITunes PlugIn Dll has stopped working" How to solve that issue Pls?

BtITunes PlugIn Dll has stopped working
how to solve that issue pls

The following document might be worth a try:
iTunes: Troubleshooting issues with third-party iTunes plug-ins

How to install this update and solve USB and touchpad issues?

I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Questions on ADF View Objects, Links and Iterators

I have a number of questions regarding using ViewObjects in applications where there are alot of relationships between tables.
First, lets say that I have ViewObject SomeView that was added to the App Module (AM) as VO1. And because it has a number of "detail" records that have to be iterated through in a "report like" view it has those other VO's added under it as "children" in the AM.
So I have
VO1 (an instance of SomeView)
--> VO2 (an instance of some other view)
--> VO3 (an instance of some other view)
that is used on pages where only a single VO1 is shown at a time.
Now because I had another page I wanted to make that had a listing of all SomeView objects. Some of the fields in SomeView are foreign keys to records in VO2 and VO3 and while I don't want to show all the fields from VO2 and VO3, I do want to show a name field from each rather than just the foreign key.
My experience (though I've never read this anywhere) tells me that when doing a "table" that is a list of rows from a VO, you can't display info from the child VO's because the child VO's are on whatever record corresponds to the "currentRow" in the parent VO and just displaying the rows in a rangeSet doesn't make each the "currentRow" so even we display 10 records in a for loop, the "currentRow" is just one, and the child VO's iterators aren't moved as we go through the for loop. (Can someone confirm if I am correct on this conclusion????)
So the only way I know of to show some field from a related table in each row is to make the VO have the entity objects from the related tables be part of the view as references. Is this the only way?
If I do that on a view that didn't have other views as children defined in the AM I don't have any problem and it works like I want.
But if I do it on a view that did have other views as children defined in the AM it makes the page(s) using that view with the children iterators behave badly. Half the information quits showing up, etc.
For example, ... if I go to the "SomeView" which was defined with only one entity object association, and I add the entity objects (that are the basis of instances of VO2 and VO3 ) as referenceable only, it totally breaks the page where I display a single VO1 and use it's VO2 and VO3 children. IS THIS NORMAL OR AM I MISSING SOMETHING?
So, is the solution that I have to have more view objects defined for different purposes ?
Can anyone give any general guidelines for when/where to use different view objects vs. when to use different iterators. I'm not having much luck with using secondary RSI's and haven't found much info on them.
Also, how about issues of naming iterators that are in various binding containers (ie. UI Model for a page). If I do and LOV it creates an iterator and gives it a default name like ViewNameIterator1. If I already have a different page that uses a regular (non LOV) iterator with that name, and the user goes back and forth between those pages, is that a clash?
Finally, I've read a couple of Steve Muench's blogs on View Link consistency but I'm not sure what the rules are on when it applies and doesn't. How you turn it on or off, etc. One of his examples in http://radio.weblogs.com/0118231/2004/02/27.html talks about it in the context of two view objects that are NOT typically "linked" in a master/detail kind of way. Like an AllDepartments and a DepartmentsLessThan view. Do you have to create a View Link between them to have results of one be reflected in the other if they aren't used in the same page in a web app? Or does it happen automatically (with the caveat that you have to do the rowQualifies method). Just feels like I'm missing some pieces.
Thanks in advance,
Lynn

Hi,
I am also interested in a best-practice note from oracle.
Currently we store history in seperate history tables for columns that changed. All this implemented in our BaseEoImpl overriding the EntityImpl.prepareForDML().
Thanks

HT5704 i tried to download iOS 6.1.5 on my iPod (4th generation) but it shows me a grey screen with this link, i opened this link and nothing happened... please help me

please help me, i am an iPod touch (4th gen) user i tried to install the iOS 6.1.5 software but it didn't work, it showed me a grey screen it didn't let me to install so it showed me the apple support link, i clicked it and nothing happened. please let me install the iOS 6.1.5.
thanks.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Improving timing and solving tempo issues in Logic

Hello, I was reading something about the beat mapping in user manual and also I was trying to improve timing of my drums recording but with no result. Is beat mapping the right tool for doing this and if so, what are the right steps to do it? Please, help.

Beatmapping will enable Logic to adapt to subtle or radical tempo changes like they happen in non quantized music or material which wasn't recorded to a click. I think what you are looking for is a way to improve the timing of your recorded drums. Check out the Strip silence function which will slice up your Audio into smaller regions detecting transients and silence. These newly created regions can then be quantized in various ways in the Region event editor.
Also in the sample editor->Factory->quantize engine you'll find some tools which claim to improve timing of Audio files but I wouldn't really advise you to use them.

HT201359 I have not been able to view this purchase and Dirt Rag has information that I even have subscription. I was to cancel the dirt

I would like to cancel the Dirt Rag subscription

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

Y I can't purchase anything in a game when I tried too it will show the message try to contact here for solving the issue pls giv me a reply

PLs giv me a reply or help me fix this cuz I can't buy anything from game but I can only buy apps

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

View this link and solve my issue PLS!

Similar Messages

Maybe you are looking for