Viewing apps in Genius tab

One thing that really annoys me when I am using the 'Genius' tab in featured apps is that, when I scroll doen through 40 or 50 (or more) apps on the list and find one that I would like to buy / review, and then return to the apps list, it takes me me back to to the top of the list, not to where I was on the list. This means I have to scroll down again through 5 or more ''additional apps' sections. This is a pain in the ***.
I like to scroll through the Genius suggested apps and purchase new apps but, after having to scroll through a load of apps every time I return to the list, I get fed up and don't look any more. I am sure I am missing out on some goods apps. I would love to just be able to return to where I was at on the list.
My questions. Firstly, is there a way around this? Secondly, is there a channel for submitting this change request to Apple?
Hope someone can help cos I am going nuts!
Cheers....Scotty

You report it here:
http://www.apple.com/feedback/ipad.html

Similar Messages

Bug in app store, genius tab

Hello,
I've erased my iPad recently, a couple of times. I do initial configs, enable "genius" on the app store, and I can never scroll while on "genius". It works fine on featured, top chards, etc. Just on "genius" it gets locked and no scroll happens.
iPad 2, 16 wifi, iOS 6.1.3
Anyone get the same behaviour?
K

Find whatever apps your purchased under that Apple ID, and remove them from your system. Dragging to Trash is pretty much all you'll have to do.

"Genius" tab empty in the App Store

Hi,
The following problem is concerning the "Genius" tab in the App Store and absolutely not the "Genius" song mixes in iTunes.
Since two weeks, I do not have anymore proposals to applications through the tab "Genius" in the App Store.
The message "You do not currently Have Any recommendations for Apps Genius" is systematically displayed.
This problem is the same on my iPhone as well on my iPad and the same message appeared on both devices, the same day,
at the same time.
Unfortunatelly, I can't remember if this happened before or after the last IOS update.
Thank you for your help.
Philippe

Works fine for me, try:
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

App Store Crashes When You Click Genius Tab

After updating to iOS 6, when I click on the Genius tab in the App Store app, the app crashes. Is there a workaround for this issue?

In cleaning out some files on Google Reader, I just read an article in TUAW about Feedback. While they may not answer your question directly, you can be sure that they WILL read your feedback and will certainly look into it. Try going to this link: http://www.apple.com/feedback/
I just submitted this question, and pointed out to the powers-that-be there, that other people are also having this problem, as evidenced by the feedback here. So maybe - just maybe, we'll start to get some action on this topic. adgray
iPod Touch 4, IOS 6

App Store Genius in iOS 6 on iPad - does it still show iPad version of apps?

I've used the App Store Genius feature on an iPad that indicates when an iPad version of an installed app is available. The concept, in detail, is that if you have copied or downloaded an iPhone version of an app onto your iPad, this Genius feature lets you know if an iPad-specific version of the same app is available. This feature can obviously be quite handy for someone with both an iPhone and iPad who keeps largely the same apps on each.
I just updated to iOS 6, and I can no longer locate his feature within the App Store on an iPad. (I am using an iPad 2, specifically, though I don't see think should matter for this issue.) Any help would be greatly appreciated. Thanks!

Yeah. I think one thing I used to like about Apple's App store over android google play store is that browsing by release date, I can discover some surprises. Top Paid and Top Free are often the big names or the cookie-mold free-to-play timesinks and they often stay there for a very long time. Please bring back the release date tab!

Problems on viewing OEM with video on the Adobe viewer APP on ipad air 8.1 with EDGE ANIMATE CC 2014.1

hi everyone
i had this problems and i don't know if is for my fault or is something related to a bug
i made an animation with a video ( i try it before just with an mp4, but later i add also the OGV in the same Group ) and one object , if you click on the object you launch a website link on a different windows and the video and the stage are in PAUSE, if you click again the video the video START.
it's very simple and on the web preview ( and on the export for WEB package ) all works properly, but if i want to view by the Adobe content viewer APP on my connected ipad ( via indesign ) i'm not able to see the video i just see the poster image and the object ( with the working link, that launch a new tab in the APP), but NOT the video in background!
INDESIGN procedure
In indesign i add the OEM on my page and launch via the folio overlay the preview on my connected ipad
is not the first time i work with animation on DPS APP, and everytime all works good
after quite a whole day on try different solutions but with the same result i hope in this forum to find help on solve this problem, from more experienced people than i
thanks in advance
cristiano

UPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer.

What Help Viewer Component Enables Index tab?

A customer of ours has a problem with any .chm help file not displaying their index contents properly (showing up as blank). In our app, we have a Help | Help Index menu item that opens up our .chm's index tab. This ends up crashing the entire application.
Similarly, accessing the help file directly in Windows Explorer (outside of our application) works fine until he goes to the chm's Index tab in which case the HelpViewer crashes.
Another similar symptom: sometimes the Index tab's contents will be blank and then a crash occurs when he attempts to close the help viewer.
The index tab problems are not unique to our help files however. So I think there's likely some Windows component missing on his system that makes any .chm file with an index tab display a blank tab or causes crashes.
Error Messages consistently mention a problem with:
ModName: itircl.dll
(Sorry rest of the message is in Swedish)
Has anyone heard of this problem and know how to fix it? Should customer just re-register the .dll? Or is something else needed?

Hi there
There are several DLLs that sometimes become corrupt or get clobbered. I think you would be well advised to download MJs Diags from the link below:
http://helpware.net
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

The Categories tab on my iPad 2 will not pull up the categories and the Genius tabe does not pull up anything at all. Any thoughts on what to do?

on my iPad 2, when I go into the iTunes store to look at apps, the categories tab will not pull up the categories list and therefore stays on my previous choice everytime and the Genius tab does not pull up anything. Please advise on how to fix. Thanks.

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

BUG: Categories callout box in Genius tab stacks up multiple times

http://i1050.photobucket.com/albums/s411/jmp909/69dcc613.jpg
Go to the genius tab in the app store and click the category button at the top left multiple times
Where is the best replace to report this?
Thanks
J

You report it here:
http://www.apple.com/feedback/ipad.html

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Is there a way to view apps as a list instead of icons?

Is there a way to view apps as a list instead of icons?

Doesn't anyone else have this desire?
It seems most people are used to seeing lists on all desktop computers. I almost never see anyone viewing files as icons when doing serious work. I'm stumped as to why this would not be an option for the iphone.
Can anyone offer a reason why Apple would confine us to icon view for apps?
Imagine if you could only view your contacts as icons? Or your itunes tracks?
Come on, what gives?

HT4689 Is there a way to view and use two tabs at once?

Is there a way to view and use two tabs using mission control?

dandjr wrote:
i also can touch every email and hit delete, what i wanted to do is "select all" then delete, to cut out a step of touching each email...
I see now that you can do that. Too bad you can't do the same with messages...one at a time.
I'd rather have a "delete all" in messages and VVM if I had a choice. Those tend to pile up and before you know it, you have a hundred to delete!

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Hi all....new user here! I currently run (successfully) the ABC "i view" app on ipad

Hi all,
I'm a new user of Mac Pro, so hang with me...I run the ABC "i view" app on iphone and ipad..but cannot run it on my Mac via safari. It comes down to an acrobat/adobe issue...I''m probably missing something really obvious, can someone help me please?
Tnx

I was able to go to http://abcnews.go.com/ and watch video - do you have the latest version of Adobe Flash Player installed? http://get.adobe.com/flashplayer/
Good luck,
Clinton

Viewing apps in Genius tab

Similar Messages

Maybe you are looking for