Viewing Discussion Forum in public group space

Hi all,
I have the following requirement:
a) let anonymous users visit a group space and
b) let them view discussion forum content inside that space.
I can enter the group space as anonymous user, but the Discussions Forum portlet tells me I'm not authoritzed to view this portlet.
How can I make this work?
Thanks in advance

Hi,
Write a dummy custom Identity Asserter/Authentication Provider and create a Weblogic subject for anonymous users so that weblogic knows that it is a authorized user and then it will let it do what a logged in user can do.
Thanks
Vishnu

Similar Messages

Welcome to the NI VeriStand Discussion Forum

Welcome to the National Instruments NI VeriStand discussion forum. This group is intended to provide a discussion forum for developers and engineers
using National Instruments NI VeriStand. Through the ni.com support site, this forum and other online tools, you have the opportunity to obtain
information and examples about NI VeriStand and to ask question to help you in creating Real-Time test applications using NI VeriStand.
In addition to answering current questions it provides a mechanism for recording this information and allowing new developers to browse the history
of the group for information that has already been discussed.
While this is not a direct support channel administrated by the NI Applications Engineering group, it gives you the tools to help and support each other (with some assistance from NI Applications Engineers if needed). You may also use this forum to provide feedback and information to NI about the needs for support and for new features.
Regards,
Angela M
Product Support Engineer

Hello Ravens Fan,
I would definitely encourage you and others interested to check out ni.com/veristand which has some more detailed explanation, as this software does many things that are difficult to cover in a short post.
NI VeriStand is a software which helps users to configure and run a Real-Time test application. This includes Hardware-in-the-Loop testing and model based control in a more configuration based environment than if you were to program this directly, in LabVIEW for instance. It has many built in features to control timing, data communication, setup your Real-Time target configuration and more. It is a standalone application, but has many ways to be customized to extend the software capabilities.
The Getting Started with NI VeriStand page has some demonstration videos which are a great way to get some more insight into this product.
I hope this helps, feel free to try it out as that really is the best way to better understand the software.
Regards,
Angela M

Discussion Forum Portlet - Different Page Groups

I want to deploy the Discussion Forum Portlet on two different page groups which contain their own products and threads. Is this possible?

The DBA upgraded the portlet and now it looks like we have a db connection problem. Getting error
Unable to perform the operation: JBO-30003: The application pool (config.AppModuleLocal) failed to checkout an application module due to the following exception:
The DBA is now working on this.

"Printer view" in discussion forums

It would be very convenient to have a "Printer view" in the discussion forums, like in the Articles. That way you would be able to actually see the text on the paper.
mvh Christian

When using Safari 2.0.3 on many discussion forums,
"High ASCII" characters such as greek letters and
mathematical symbols will not display in my posts. I
wonder what could be the problem, because if I type
the same characters in Camino, they display properly
in my posts.
Many discussion forums use a Latin-1 encoding. This means the browser must convert anything above ascii into numerical references like & #12345;. Mozilla-type browsers do this, but Safari does not. Forums intended to accomodate Greek or Math should use UTF-8, like this one does.

Discussion forums in 2013(management view)

I have created a discussion forum and taken the management view as default view.(Iam able to see all the items that are available in the management view of that particular discussion forum/list).
When I have added this particular discussion board as a web part in a page. I have taken the management view. Iam not able to view the items. It is showing blank. I have tried in different sites.

Have to tried any other view and apply. Hope it works.
Regards Roy Joyson
Please remember to mark your question as "answered"/"Vote helpful" if this solves/helps your problem.
Roy Joyson

Off topic - set "Discussions" as default view in forum?

Since the forum update the default view is "Trending discussions". I prefer to see the full list of discussions, but don't see an option for that. I get there by clicking on a "trending discussion" and then on the "Discussions" bread crumb menu. How do I go directly to "Discussions"?

r, Larry, S, Scott,
To set discussions as default is a thing of the past.
The only way to have it is to Bookmark (or whatever it is called in your preferred browser) it.
You still have the even more outdated option of 100 threads per page if you use this full URL (for your Bookmark):
http://forums.adobe.com/community/illustrator/illustrator_general?view=discussions#/?per_p age=100
The crucial part,
?view=discussions#/?per_page=100
can be added to the Discussion page of any forum, so you can (use the Bookmark and) have it all back.

Discussion Forum does not display the items in Answered question ,Unanswered question views.

Hi All,
Discussion Forum does not display the items in Answered question ,Unanswered question views. Please find the below screen
what is the difference between Answered and unanswered view?
I have marked the discussion as question .
have replied for the question those discussion are visible in Unanswered view and the answered view is showings as no item to show.
Below screenshot is answered questions view.
Can you please help on this .
Thanks in advance ,
Sunitha

The discussion in which at least one of the replies is marked as "Best Reply" will show in the "Answered Questions" section.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Is there any way to programmatically get the discussion forum Id using API

Hi,
Can any one let me know how to get and set the Discussion service forum Id / category Id to the discussion task flow programmatically using services API's. Here I am using Web center groupspace API's to create and add members to group space from my fusion app. Added the discussion task flow to my fusion app and need to set the category Id / forum Id assigned to that groupspace and display the corresponding discussions. The test connections to discussion forum is success. I am getting all the forums corresponding to that user in my ui. But I want to get the forum that is associated with my groupspace.
thanks.

Never mind. Got the solution, can get this through servicesMetaData api.

Replacing Home Space with a specific Group Space.

Hi,
We have a Webcenter Spaces 11.8 environment.
We are trying to completely bypass the home space and take the user to a specific space.
While this is possible to do it through the initial redirection based on application/enterprise role, some re-directions are causing the user to land in the home space.
Also, the user can get to the home space pages by typing in the url. We want to restrict the user from viewing the home space altogether and replace it completely with our group space.
Approach1 : Page Links -
We tried to bring in pages from the group space into the home space navigation model as page links. Even if the group space is public, we cannot link to its pages as we cannot see the pages in the page link popup. Only home space pages are shown. Is this expected? How do we bring in pages from a specific group space into the home page navigation?
Approach 2: Group Space Pages Query -
We can bring all the pages from the "Default Navigation Model" of the group space into the home space navigation model. However, the landing page upon login needs to be a visible page in the home space. How do we get the user redirected to a specific page in a group space and make that node as selected once the user logs in.
Thanks in advance.

Hi,
Check this code.
data : role(10) type c value 'crick ter',
role1(10) type c,
role2(10) type c.
write: / role.
SPLIT role AT space INTO role1 role2.
concatenate role1 role2 into role separated by '_'.
write: / role.
<REMOVED BY MODERATOR>
Regards.
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 7:25 PM

Discussion forum layout could be improved

In each discussion forum, topics are listed a fixed box nested inside several frames surrounded by white space.
For example, although Numbers forum has 1,911 topics, with default settings only 15 topics are listed in a 9.2" diagonal box, in the center of my 24" screen. Below the list, I am invited to click through 128 screens to see all 1,911 topics, one screen at a time. (The list length can grow to 50 by editing settings while logged on; I did not see how to do this when viewing the list.)
Suggestions:
1. allow scrolling through topics within the list view
2. allow topic list frame width to scale with the window
Can a discussion thread view be expanded?
I hope this is an appropriate comment for this area. Thank you for listening.
L Jones

The width of the frame containing a topic's text (incl. scroll bar) is approx. 800 px. This is pretty standard practice on pages with one column of content.
Even a site like the New York Times', which is five columns wide, has a max width of approx 975 px, with the main body of content and links contained within 625 px.
A 24" screen is great for many things, but it brings no particular benefit when it comes to viewing web pages at standard resolutions, because most pages are designed with smaller displays and handheld devices (e.g. the iPhone) in mind.

Webcenter group space access denied for newly added user in oid group .

Hi All,
We have upgraded our webcenter with latest version 11.1.1.4.
We have created a groupspace where we set the acceess for group space usiing add groups .
Suppose i have added userRoles1 to get access of this groupspace.
Now i am adding another user part of this usergroup from some oid console .
I am able to see this user in the member of this userRoles but whenever this user
is trying to access this gs getting unauthorized access message .
Any pointer please .
Regards ,
Arun

Hi,
User Account Control treats members of the Administrators group as standard users.
With UAC enabled, members of the local Administrators group run with the same access token as standard users. Only when a member of the local Administrators group gives approval can a process use the administrator’s full access token. This process is the
basis of the principle of Admin Approval Mode.
When an administrator logs on to Windows Vista or newer, the Local Security Authority (LSA) creates two access tokens. If LSA is notified that the user is a member of the Administrators group, LSA creates the second logon that has the administrator rights
removed (filtered).
To work around this issue, use the net use command together with a UNC name to access the network location.
Programs may be unable to access some network locations after you turn on User Account Control in Windows Vista or newer operating systems
http://support.microsoft.com/kb/937624
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Integrated Solutions Java Discussion Forum

Hi
Here's some feedback on the above portlet. We have installed the forum in a separate OC4J container on 10g. It installed without any problems and is working correctly through Portal apart from the following.
We are experiencing problems wth refreshing.
a. If you reply to a thread the reply is placed second last on the page. You have to exit and re-enter the portlet before the lastest thread is displayed at the bottom of the page.
b. Similar problem. Two users are accessing the forum. First user creates a new reply to a thread. The second user accesses the forum/topic and can see that the number of replies are correct but on accessing the thread cannot see the latest thread. They have to exit and re-enter the portlet before the new thread is viewable.
In general users of the discussion forum may find it useful if security on the Portlet was enhanced to allow security to be attached to Products to allow Products to be public to all users or private to a group of users. The search would also required to be amended to only bring back forum information that the user has access to.
Belinda Chisholm

Hi Belinda!
Thankx a lot for the comments, I appreciate.
I've filed enhancements request for all the suggestion you provided. The development team should consider them in future enhancements.

Where do I view discussions which I have participated in?

Where do I view discussions which I have participated in? They aren't listed with the ones that I started myself.

Hi, Timothy -
You can also set up your own personalized homepage which will show that information.
To do that, click the large-face "Apple Support Communities" legend at the top of this page. You'll be taken to the site's generic homepage.
Then click the tab Your View. You'll be shown a different array of things. On that tab is a small "personalize" link - click it, and you'll be taken to the setup area for Your View.
Ignore the Layout choices for right now.
The basic means of adding a widget (a section on the page) is to use the hierarchical menus in the blue area near the top to get the one you want displayed in the right-hand space of that area. Once it is displaying there, grab the green box and drag it down into the lower area - the background will highlight a pale green indicating where you can drop/place that item.
To get rid of a widget already placed - click the small reveal triangle in the widget's header, and choose 'Remove this widget'.
I would suggest getting rid of the section Recent Content and replacing it with Your Content or with Watch A User - both of those are accessed via the Content item in the menus. Both of those show pretty much the same thing provided you set Watch A User to watch you. Both will display all discussions (threads) you've posted in, whether it is a discussion you started or one you added a reply to. They are shown in chronological order based on recent activity in that discussion by anyone, most recent on top. How many are displayed depends on how you set the pref for that widget.
You can use the Edit This Widget choice in a widget's reveal triangle menu to set things like number of items to be shown, etc.
Once you've got things set up the way you want them for the moment, click the Publish button.
You can fiddle with how things look to your heart's content. Even after you've got Your View set up the way you like it, you can try out different things. If you don't like the way they look, just click the Discard Changes button and you'll be returned to the last arrangement you published.
If you want that personalized page to appear anytime you go to the forum homepage link, after publishing your personalized page and with the Your View tab active, click the 'set as default tab' link just to the right of that tab.

Welcome to the NI Discussion Forums

Welcome to the NI Discussion Forums! The NI Discussion Forums are a peer-to-peer support and collaboration community made up of volunteers. These boards serve as a meeting point where you can post any questions, thoughts, or suggestions you may have regarding NI products. Thousands of people worldwide – including NI engineers – can read your post and reply with their input.
Before you jump into the forums, we recommend you first read our User Guidelines to ensure the best experience for yourself and others.
If you are new here, here are a few quick tips to help you get started:
1. Have a question? Start with a search.
It's possible there is already an answer to your question within one of the forum boards.
2. Ready to make a post? Take a look at our board listings to find the most appropriate place to start your topic.
We have categories for our most active software and hardware boards, as well as additional product boards.
3. When writing your post, be sure to provide as many relevant details as possible.
Information such as product versions, operating systems, hardware used, applicable screenshots, and code files will help your fellow forum users better answer your question. You will also want to provide information on any troubleshooting you have already attempted.
While you're here, you may want to check out these special areas of our forums:
Get a VI converted by posting to the Version Conversion board.
Have an off-topic discussion in the BreakPoint board.
Have a great idea or feedback for an NI product? Visit the Idea Exchange.
Ask a forum related question in the Feedback on Discussion Forums board.
You can find even more user generated content in the following areas off of the NI Discussion Forums:
Example Code
Tutorials
Technical Blogs
Online User Groups
Want more information to help you get started?
View the rest of our new user content here or visit the Help section.
Thank you for being a part of our community! We look forward to seeing your contributions!

Welcome to the NI Discussion Forums! The NI Discussion Forums are a peer-to-peer support and collaboration community made up of volunteers. These boards serve as a meeting point where you can post any questions, thoughts, or suggestions you may have regarding NI products. Thousands of people worldwide – including NI engineers – can read your post and reply with their input.
Before you jump into the forums, we recommend you first read our User Guidelines to ensure the best experience for yourself and others.
If you are new here, here are a few quick tips to help you get started:
1. Have a question? Start with a search.
It's possible there is already an answer to your question within one of the forum boards.
2. Ready to make a post? Take a look at our board listings to find the most appropriate place to start your topic.
We have categories for our most active software and hardware boards, as well as additional product boards.
3. When writing your post, be sure to provide as many relevant details as possible.
Information such as product versions, operating systems, hardware used, applicable screenshots, and code files will help your fellow forum users better answer your question. You will also want to provide information on any troubleshooting you have already attempted.
While you're here, you may want to check out these special areas of our forums:
Get a VI converted by posting to the Version Conversion board.
Have an off-topic discussion in the BreakPoint board.
Have a great idea or feedback for an NI product? Visit the Idea Exchange.
Ask a forum related question in the Feedback on Discussion Forums board.
You can find even more user generated content in the following areas off of the NI Discussion Forums:
Example Code
Tutorials
Technical Blogs
Online User Groups
Want more information to help you get started?
View the rest of our new user content here or visit the Help section.
Thank you for being a part of our community! We look forward to seeing your contributions!

Special Character in Subject Field of Discussion Forum

I am creating a new discussion, in the subject when i enter "Portal Discussion?" then it gives error that special character is not allowed. But i want to use the "?" in the subject at the time of creation.
After creating the discussion i can edit the same thing with special characters, then why SharePoint is not allowing to enter special character at the time of creation.

Hi
Refer this link
http://social.technet.microsoft.com/Forums/office/en-US/6e7a7eae-26fc-467f-bfdc-7c5d5ff49a95/discussion-forum-storing-special-character-in-title-differently?forum=sharepointdevelopmentlegacy
It seems that SharePoint will allow the Title of the discussion board to remain with the special characters, but the actual URL will not be allowed and will strip them from the final URL. SharePoint Manager easily shows this, btw.
So, there are probably many different ways to get what you are looking for, but one way could be to have a Linq query look for all Discussion Boards on a given site and then return the Title and the DefaultViewUrl, which the latter could then be prefixed by
the SPWeb.Url to give you something like "Testing? , /" for the title and http://mysite/Lists/Testing/AllItems.aspx (assuming
that is the actual default view) which you could then use as the final URL for your hyperlink in your web part.
In the code snippet below you can see the Linq query (which I assumed from your post that you need to query to find the Discussion Boards) and a simple DataTable that you could then use to populate a repeater or you just omit the DataTable and
enumerate the results from the query yourself:
var linqResults
= from list in oSPWeb.Lists.Cast<SPList>() where list.BaseTemplate
== SPListTemplateType.DiscussionBoardselect list;
DataTable oDataTable
= new DataTable();
DataColumn oDataColumn_Title
= new DataColumn("Title", typeof(string));
oDataTable.Columns.Add(oDataColumn_Title);
DataColumn oDataColumn_URL
= new DataColumn("URL", typeof(string));
oDataTable.Columns.Add(oDataColumn_URL);
foreach (SPList oSPList in linqResults)
DataRow oDataRow
= oDataTable.NewRow();
oDataRow[
"Title"]
= oSPList.Title.ToString();
oDataRow[
"URL"]
= oSPWeb.Url + oSPList.DefaultViewUrl.ToString();
oDataTable.Rows.Add(oDataRow);
oDataTable.AcceptChanges();
Please remember to click 'Mark as Answer' on the answer if it helps you

Viewing Discussion Forum in public group space

Similar Messages

Maybe you are looking for