Vim refuses to start in urxvt+screen if 'mouse' is set

I recently went back to using screen, so I noticed I have an issue with vim, which just sits there doing nothing, but only in screen inside urxvt. in a VT it starts just fine.
this issue is exactly the one described here.
as a workaround, I added to my .vimrc
set mouse=
not that I use the mouse for something else than copy-pasting (which any decent terminal does fine anyway)... but this is annoying.
anyone encountering this too?

I just searched for a solution and found this thread.
I can confirm the problem. Additional info:
Vim works if I set "term $TERM" in .screenrc (atm that's "rxvt-unicode"), but when I change it to the default value of "screen", then Vim doesn't start anymore until I do a "set mouse=" in .vimrc

Similar Messages

  • My computer suddenly refuse to start. When I turn it on it gives the startup sound but the screen is grey and after a while a little folder icon with a question mark inside turns up. It doesn't blink. What to do? Nothing happens if I try to start up from

    As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
    I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
    I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
    Anybody have any good advice?
    I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • My laptop have refused to start it will just show windows boot manager on the screen,

    My laptop have refused to start up, it will just show windows boot manager on the screen,and me to choose an operating system to start or press tab to select a tool but when I tryed all those things none of it will respond

    Thanks also Star 1. I have gone the route you suggest also but with the same results as I explained to the hatter. I have about a dozen die-hard Windows friends and they have been trying to help me also. We have tried everything and I have read a several pages on how to do it but nothing looks like what they are saying it does. When in Vista, Vista says it is the default SU OS. When in XP, XP says it is the default SU OS. So there is nothing to change. Only the Windows Boot Manager (which is really not a manager but a boot selector) shows Vista as default and XP next. I've learned again what I already knew. Windows is a conglomerated piece of crap that is hard as heck to use.

  • [SOLVED] GNOME starts into black screen, crashing after a minute.

    This is happening after recently upgrading GNOME to 3.8 from 3.6. I attempted to downgrade, but it still refuses to start.
    Here's the Xorg log.
    [ 3050.246]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 3050.246] X Protocol Version 11, Revision 0
    [ 3050.246] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 3050.246] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
    [ 3050.246] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
    [ 3050.246] Build Date: 01 July 2013 10:48:42AM
    [ 3050.246]
    [ 3050.246] Current version of pixman: 0.30.0
    [ 3050.247] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 3050.247] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3050.247] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 28 14:09:23 2013
    [ 3050.247] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3050.247] (==) No Layout section. Using the first Screen section.
    [ 3050.247] (==) No screen section available. Using defaults.
    [ 3050.247] (**) |-->Screen "Default Screen Section" (0)
    [ 3050.247] (**) | |-->Monitor "<default monitor>"
    [ 3050.247] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 3050.247] (==) Automatically adding devices
    [ 3050.247] (==) Automatically enabling devices
    [ 3050.247] (==) Automatically adding GPU devices
    [ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 3050.247] Entry deleted from font path.
    [ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 3050.247] Entry deleted from font path.
    [ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 3050.247] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 3050.247] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3050.247] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3050.247] (II) Loader magic: 0x7fdc20
    [ 3050.247] (II) Module ABI versions:
    [ 3050.247] X.Org ANSI C Emulation: 0.4
    [ 3050.247] X.Org Video Driver: 14.1
    [ 3050.247] X.Org XInput driver : 19.1
    [ 3050.247] X.Org Server Extension : 7.0
    [ 3050.248] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 3050.250] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
    [ 3050.250] Initializing built-in extension Generic Event Extension
    [ 3050.250] Initializing built-in extension SHAPE
    [ 3050.250] Initializing built-in extension MIT-SHM
    [ 3050.250] Initializing built-in extension XInputExtension
    [ 3050.250] Initializing built-in extension XTEST
    [ 3050.250] Initializing built-in extension BIG-REQUESTS
    [ 3050.250] Initializing built-in extension SYNC
    [ 3050.250] Initializing built-in extension XKEYBOARD
    [ 3050.250] Initializing built-in extension XC-MISC
    [ 3050.250] Initializing built-in extension SECURITY
    [ 3050.250] Initializing built-in extension XINERAMA
    [ 3050.250] Initializing built-in extension XFIXES
    [ 3050.250] Initializing built-in extension RENDER
    [ 3050.250] Initializing built-in extension RANDR
    [ 3050.250] Initializing built-in extension COMPOSITE
    [ 3050.250] Initializing built-in extension DAMAGE
    [ 3050.250] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3050.250] Initializing built-in extension DOUBLE-BUFFER
    [ 3050.250] Initializing built-in extension RECORD
    [ 3050.250] Initializing built-in extension DPMS
    [ 3050.250] Initializing built-in extension X-Resource
    [ 3050.250] Initializing built-in extension XVideo
    [ 3050.251] Initializing built-in extension XVideo-MotionCompensation
    [ 3050.252] Initializing built-in extension XFree86-VidModeExtension
    [ 3050.253] Initializing built-in extension XFree86-DGA
    [ 3050.253] Initializing built-in extension XFree86-DRI
    [ 3050.254] Initializing built-in extension DRI2
    [ 3050.254] (II) LoadModule: "glx"
    [ 3050.254] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 3050.254] (II) Module glx: vendor="X.Org Foundation"
    [ 3050.254] compiled for 1.14.2, module version = 1.0.0
    [ 3050.254] ABI class: X.Org Server Extension, version 7.0
    [ 3050.254] (==) AIGLX enabled
    [ 3050.255] Loading extension GLX
    [ 3050.255] (==) Matched intel as autoconfigured driver 0
    [ 3050.255] (==) Matched intel as autoconfigured driver 1
    [ 3050.255] (==) Matched vesa as autoconfigured driver 2
    [ 3050.255] (==) Matched modesetting as autoconfigured driver 3
    [ 3050.255] (==) Matched fbdev as autoconfigured driver 4
    [ 3050.255] (==) Assigned the driver to the xf86ConfigLayout
    [ 3050.255] (II) LoadModule: "intel"
    [ 3050.255] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 3050.255] (II) Module intel: vendor="X.Org Foundation"
    [ 3050.255] compiled for 1.14.2, module version = 2.21.12
    [ 3050.255] Module class: X.Org Video Driver
    [ 3050.255] ABI class: X.Org Video Driver, version 14.1
    [ 3050.255] (II) LoadModule: "vesa"
    [ 3050.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 3050.256] (II) Module vesa: vendor="X.Org Foundation"
    [ 3050.256] compiled for 1.14.0, module version = 2.3.2
    [ 3050.256] Module class: X.Org Video Driver
    [ 3050.256] ABI class: X.Org Video Driver, version 14.1
    [ 3050.256] (II) LoadModule: "modesetting"
    [ 3050.256] (WW) Warning, couldn't open module modesetting
    [ 3050.256] (II) UnloadModule: "modesetting"
    [ 3050.256] (II) Unloading modesetting
    [ 3050.256] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 3050.256] (II) LoadModule: "fbdev"
    [ 3050.256] (WW) Warning, couldn't open module fbdev
    [ 3050.256] (II) UnloadModule: "fbdev"
    [ 3050.256] (II) Unloading fbdev
    [ 3050.256] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 3050.256] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 3050.257] (II) VESA: driver for VESA chipsets: vesa
    [ 3050.257] (++) using VT number 3
    [ 3050.257] (WW) Falling back to old probe method for vesa
    [ 3050.257] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 3050.257] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 3050.257] (==) intel(0): RGB weight 888
    [ 3050.257] (==) intel(0): Default visual is TrueColor
    [ 3050.257] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 3050.257] (**) intel(0): Relaxed fencing enabled
    [ 3050.257] (**) intel(0): Wait on SwapBuffers? enabled
    [ 3050.257] (**) intel(0): Triple buffering? enabled
    [ 3050.257] (**) intel(0): Framebuffer tiled
    [ 3050.257] (**) intel(0): Pixmaps tiled
    [ 3050.257] (**) intel(0): 3D buffers tiled
    [ 3050.257] (**) intel(0): SwapBuffers wait enabled
    [ 3050.257] (==) intel(0): video overlay key set to 0x101fe
    [ 3050.257] (II) intel(0): Output LVDS1 has no monitor section
    [ 3050.257] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 3050.259] (II) intel(0): Output VGA1 has no monitor section
    [ 3050.283] (II) intel(0): Output HDMI1 has no monitor section
    [ 3050.283] (II) intel(0): Output DP1 has no monitor section
    [ 3050.283] (II) intel(0): Output HDMI2 has no monitor section
    [ 3050.283] (II) intel(0): Output HDMI3 has no monitor section
    [ 3050.284] (II) intel(0): Output DP2 has no monitor section
    [ 3050.284] (II) intel(0): Output DP3 has no monitor section
    [ 3050.284] (II) intel(0): EDID for output LVDS1
    [ 3050.284] (II) intel(0): Manufacturer: LGD Model: 2d8 Serial#: 0
    [ 3050.284] (II) intel(0): Year: 2012 Week: 0
    [ 3050.284] (II) intel(0): EDID Version: 1.3
    [ 3050.284] (II) intel(0): Digital Display Input
    [ 3050.284] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
    [ 3050.284] (II) intel(0): Gamma: 2.20
    [ 3050.284] (II) intel(0): DPMS capabilities: StandBy Suspend Off
    [ 3050.284] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 3050.284] (II) intel(0): First detailed timing is preferred mode
    [ 3050.284] (II) intel(0): redX: 0.600 redY: 0.355 greenX: 0.334 greenY: 0.559
    [ 3050.284] (II) intel(0): blueX: 0.149 blueY: 0.114 whiteX: 0.313 whiteY: 0.329
    [ 3050.284] (II) intel(0): Manufacturer's mask: 0
    [ 3050.284] (II) intel(0): Supported detailed timing:
    [ 3050.284] (II) intel(0): clock: 75.2 MHz Image Size: 277 x 156 mm
    [ 3050.284] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1478 h_blank_end 1582 h_border: 0
    [ 3050.284] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 792 v_border: 0
    [ 3050.284] (II) intel(0): LG Display
    [ 3050.284] (II) intel(0): LP125WH2-SLB3
    [ 3050.284] (II) intel(0): EDID (in hex):
    [ 3050.284] (II) intel(0): 00ffffffffffff0030e4d80200000000
    [ 3050.284] (II) intel(0): 00160103801c1078ea8855995b558f26
    [ 3050.284] (II) intel(0): 1d505400000001010101010101010101
    [ 3050.284] (II) intel(0): 010101010101601d56d8500018303040
    [ 3050.284] (II) intel(0): 4700159c1000001b0000000000000000
    [ 3050.284] (II) intel(0): 00000000000000000000000000fe004c
    [ 3050.284] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 3050.284] (II) intel(0): 004c503132355748322d534c42330059
    [ 3050.284] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 3050.284] (II) intel(0): Printing probed modes for output LVDS1
    [ 3050.284] (II) intel(0): Modeline "1366x768"x60.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
    [ 3050.284] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 3050.284] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 3050.284] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 3050.284] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 3050.285] (II) intel(0): EDID for output VGA1
    [ 3050.309] (II) intel(0): EDID for output HDMI1
    [ 3050.309] (II) intel(0): EDID for output DP1
    [ 3050.310] (II) intel(0): EDID for output HDMI2
    [ 3050.310] (II) intel(0): EDID for output HDMI3
    [ 3050.310] (II) intel(0): EDID for output DP2
    [ 3050.310] (II) intel(0): EDID for output DP3
    [ 3050.310] (II) intel(0): Output LVDS1 connected
    [ 3050.310] (II) intel(0): Output VGA1 disconnected
    [ 3050.310] (II) intel(0): Output HDMI1 disconnected
    [ 3050.310] (II) intel(0): Output DP1 disconnected
    [ 3050.310] (II) intel(0): Output HDMI2 disconnected
    [ 3050.310] (II) intel(0): Output HDMI3 disconnected
    [ 3050.310] (II) intel(0): Output DP2 disconnected
    [ 3050.310] (II) intel(0): Output DP3 disconnected
    [ 3050.310] (II) intel(0): Using exact sizes for initial modes
    [ 3050.310] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 3050.310] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 3050.310] (II) intel(0): Kernel page flipping support detected, enabling
    [ 3050.310] (==) intel(0): DPI set to (96, 96)
    [ 3050.310] (II) Loading sub module "fb"
    [ 3050.310] (II) LoadModule: "fb"
    [ 3050.310] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 3050.310] (II) Module fb: vendor="X.Org Foundation"
    [ 3050.310] compiled for 1.14.2, module version = 1.0.0
    [ 3050.310] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 3050.310] (II) Loading sub module "dri2"
    [ 3050.310] (II) LoadModule: "dri2"
    [ 3050.310] (II) Module "dri2" already built-in
    [ 3050.310] (II) UnloadModule: "vesa"
    [ 3050.310] (II) Unloading vesa
    [ 3050.310] (==) Depth 24 pixmap format is 32 bpp
    [ 3050.310] (II) intel(0): [DRI2] Setup complete
    [ 3050.310] (II) intel(0): [DRI2] DRI driver: i965
    [ 3050.310] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 3050.311] (II) UXA(0): Driver registered support for the following operations:
    [ 3050.311] (II) solid
    [ 3050.311] (II) copy
    [ 3050.311] (II) composite (RENDER acceleration)
    [ 3050.311] (II) put_image
    [ 3050.311] (II) get_image
    [ 3050.311] (==) intel(0): Backing store disabled
    [ 3050.311] (==) intel(0): Silken mouse enabled
    [ 3050.311] (II) intel(0): Initializing HW Cursor
    [ 3050.311] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 3050.312] (==) intel(0): DPMS enabled
    [ 3050.312] (==) intel(0): Intel XvMC decoder enabled
    [ 3050.312] (II) intel(0): Set up textured video
    [ 3050.312] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 3050.312] (II) intel(0): direct rendering: DRI2 Enabled
    [ 3050.312] (==) intel(0): hotplug detection: "enabled"
    [ 3050.336] (--) RandR disabled
    [ 3050.346] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 3050.346] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context
    [ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 3050.346] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 3050.346] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 3050.346] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 3050.346] (II) AIGLX: Loaded and initialized i965
    [ 3050.346] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 3050.346] (II) intel(0): Setting screen physical size to 361 x 203
    [ 3050.373] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 3050.373] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3050.373] (II) LoadModule: "evdev"
    [ 3050.373] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 3050.373] (II) Module evdev: vendor="X.Org Foundation"
    [ 3050.373] compiled for 1.14.2, module version = 2.8.1
    [ 3050.373] Module class: X.Org XInput Driver
    [ 3050.373] ABI class: X.Org XInput driver, version 19.1
    [ 3050.373] (II) Using input driver 'evdev' for 'Power Button'
    [ 3050.373] (**) Power Button: always reports core events
    [ 3050.373] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 3050.373] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3050.373] (--) evdev: Power Button: Found keys
    [ 3050.373] (II) evdev: Power Button: Configuring as keyboard
    [ 3050.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 3050.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 3050.373] (**) Option "xkb_rules" "evdev"
    [ 3050.373] (**) Option "xkb_model" "pc104"
    [ 3050.373] (**) Option "xkb_layout" "us"
    [ 3050.389] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 3050.389] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3050.389] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3050.389] (**) Video Bus: always reports core events
    [ 3050.389] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 3050.389] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3050.389] (--) evdev: Video Bus: Found keys
    [ 3050.389] (II) evdev: Video Bus: Configuring as keyboard
    [ 3050.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
    [ 3050.389] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 3050.389] (**) Option "xkb_rules" "evdev"
    [ 3050.389] (**) Option "xkb_model" "pc104"
    [ 3050.389] (**) Option "xkb_layout" "us"
    [ 3050.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 3050.390] (II) No input driver specified, ignoring this device.
    [ 3050.390] (II) This device may have been added with another device file.
    [ 3050.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 3050.390] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 3050.390] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 3050.390] (**) Sleep Button: always reports core events
    [ 3050.390] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 3050.390] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 3050.390] (--) evdev: Sleep Button: Found keys
    [ 3050.390] (II) evdev: Sleep Button: Configuring as keyboard
    [ 3050.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 3050.390] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 3050.390] (**) Option "xkb_rules" "evdev"
    [ 3050.390] (**) Option "xkb_model" "pc104"
    [ 3050.390] (**) Option "xkb_layout" "us"
    [ 3050.390] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 3050.390] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 3050.390] (II) No input driver specified, ignoring this device.
    [ 3050.390] (II) This device may have been added with another device file.
    [ 3050.390] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 3050.390] (II) No input driver specified, ignoring this device.
    [ 3050.390] (II) This device may have been added with another device file.
    [ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
    [ 3050.391] (II) No input driver specified, ignoring this device.
    [ 3050.391] (II) This device may have been added with another device file.
    [ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
    [ 3050.391] (II) No input driver specified, ignoring this device.
    [ 3050.391] (II) This device may have been added with another device file.
    [ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
    [ 3050.391] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
    [ 3050.391] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
    [ 3050.391] (**) Wacom ISDv4 E6 Pen: always reports core events
    [ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
    [ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
    [ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
    [ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
    [ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
    [ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
    [ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
    [ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3050.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
    [ 3050.391] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
    [ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
    [ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
    [ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
    [ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
    [ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
    [ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
    [ 3050.391] (II) No input driver specified, ignoring this device.
    [ 3050.391] (II) This device may have been added with another device file.
    [ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
    [ 3050.392] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
    [ 3050.392] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
    [ 3050.392] (**) Wacom ISDv4 E6 Finger: always reports core events
    [ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
    [ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
    [ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
    [ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
    [ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
    [ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
    [ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
    [ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
    [ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
    [ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
    [ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3050.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
    [ 3050.392] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
    [ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
    [ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
    [ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
    [ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
    [ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
    [ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
    [ 3050.392] (II) No input driver specified, ignoring this device.
    [ 3050.392] (II) This device may have been added with another device file.
    [ 3050.392] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 3050.392] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3050.392] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 3050.392] (**) AT Translated Set 2 keyboard: always reports core events
    [ 3050.392] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 3050.392] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 3050.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 3050.392] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 3050.392] (**) Option "xkb_rules" "evdev"
    [ 3050.392] (**) Option "xkb_model" "pc104"
    [ 3050.392] (**) Option "xkb_layout" "us"
    [ 3050.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
    [ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 3050.393] (II) LoadModule: "synaptics"
    [ 3050.393] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 3050.393] (II) Module synaptics: vendor="X.Org Foundation"
    [ 3050.393] compiled for 1.14.1, module version = 1.7.1
    [ 3050.393] Module class: X.Org XInput Driver
    [ 3050.393] ABI class: X.Org XInput driver, version 19.1
    [ 3050.393] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 3050.393] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3050.393] (**) Option "Device" "/dev/input/event11"
    [ 3050.483] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 3050.483] (**) Option "TapButton1" "1"
    [ 3050.483] (**) Option "TapButton2" "2"
    [ 3050.483] (**) Option "TapButton3" "3"
    [ 3050.483] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3050.483] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3050.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 3050.523] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 3050.523] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3050.523] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 3050.523] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 3050.523] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
    [ 3050.524] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 3050.524] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 3050.524] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
    [ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
    [ 3050.524] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
    [ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 3050.524] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
    [ 3050.524] (II) No input driver specified, ignoring this device.
    [ 3050.524] (II) This device may have been added with another device file.
    [ 3050.524] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 3050.524] (II) No input driver specified, ignoring this device.
    [ 3050.524] (II) This device may have been added with another device file.
    [ 3050.524] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
    [ 3050.524] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 3050.524] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 3050.524] (**) ThinkPad Extra Buttons: always reports core events
    [ 3050.524] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
    [ 3050.524] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 3050.524] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 3050.524] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
    [ 3050.524] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
    [ 3050.524] (**) Option "xkb_rules" "evdev"
    [ 3050.524] (**) Option "xkb_model" "pc104"
    [ 3050.524] (**) Option "xkb_layout" "us"
    [ 3050.673] (II) intel(0): EDID vendor "LGD", prod id 728
    [ 3050.673] (II) intel(0): Printing DDC gathered Modelines:
    [ 3050.673] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
    [ 3053.746] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 3057.566] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 3057.576] (II) intel(0): EDID vendor "LGD", prod id 728
    [ 3057.576] (II) intel(0): Printing DDC gathered Modelines:
    [ 3057.576] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
    [ 3057.604] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
    [ 3057.604] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3057.604] setversion 1.4 failed
    [ 3059.233] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 3145.715] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 3145.719] (II) intel(0): EDID vendor "LGD", prod id 728
    [ 3145.719] (II) intel(0): Printing DDC gathered Modelines:
    [ 3145.719] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
    [ 3145.747] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
    [ 3145.747] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3148.360] (II) evdev: ThinkPad Extra Buttons: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) evdev: TPPS/2 IBM TrackPoint: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) UnloadModule: "synaptics"
    [ 3148.360] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) evdev: Wacom ISDv4 E6 Finger: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) evdev: Wacom ISDv4 E6 Pen: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) evdev: Sleep Button: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) evdev: Video Bus: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3148.360] (II) evdev: Power Button: Close
    [ 3148.360] (II) UnloadModule: "evdev"
    [ 3149.198] (EE) Server terminated successfully (0). Closing log file.
    I'd appreciate any help I could get.
    Last edited by erdi13 (2013-07-30 03:49:12)

    I tried entering GNOME with gdm.
    Before gdm runs, it freezes at a black screen for about a minute, then flashes the "Oh No" screen.  Afterward, it allows me to login. After logging in, it freezes on the grey background of gdm for another minute. Once it displays the "Oh No" screen, it takes me back to a black screen, repeating the cycle.
    Also, I upgraded X11 at the same time as GNOME.
    Edit: Here's a recent Xorg log, if it helps.
    [ 23.867]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 23.868] X Protocol Version 11, Revision 0
    [ 23.868] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 23.869] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
    [ 23.869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
    [ 23.870] Build Date: 01 July 2013 10:48:42AM
    [ 23.870]
    [ 23.871] Current version of pixman: 0.30.0
    [ 23.872] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.872] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.874] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 16:06:24 2013
    [ 23.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.878] (==) No Layout section. Using the first Screen section.
    [ 23.878] (==) No screen section available. Using defaults.
    [ 23.878] (**) |-->Screen "Default Screen Section" (0)
    [ 23.878] (**) | |-->Monitor "<default monitor>"
    [ 23.878] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 23.878] (**) | |-->Device "Intel Graphics"
    [ 23.878] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.878] (==) Automatically adding devices
    [ 23.878] (==) Automatically enabling devices
    [ 23.878] (==) Automatically adding GPU devices
    [ 23.885] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 23.886] Entry deleted from font path.
    [ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 23.886] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 23.886] Entry deleted from font path.
    [ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 23.886] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 23.886] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.886] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.886] (II) Loader magic: 0x7fdc20
    [ 23.886] (II) Module ABI versions:
    [ 23.886] X.Org ANSI C Emulation: 0.4
    [ 23.886] X.Org Video Driver: 14.1
    [ 23.886] X.Org XInput driver : 19.1
    [ 23.886] X.Org Server Extension : 7.0
    [ 23.886] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 23.888] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
    [ 23.889] Initializing built-in extension Generic Event Extension
    [ 23.890] Initializing built-in extension SHAPE
    [ 23.890] Initializing built-in extension MIT-SHM
    [ 23.891] Initializing built-in extension XInputExtension
    [ 23.891] Initializing built-in extension XTEST
    [ 23.892] Initializing built-in extension BIG-REQUESTS
    [ 23.893] Initializing built-in extension SYNC
    [ 23.893] Initializing built-in extension XKEYBOARD
    [ 23.894] Initializing built-in extension XC-MISC
    [ 23.895] Initializing built-in extension SECURITY
    [ 23.895] Initializing built-in extension XINERAMA
    [ 23.896] Initializing built-in extension XFIXES
    [ 23.896] Initializing built-in extension RENDER
    [ 23.897] Initializing built-in extension RANDR
    [ 23.897] Initializing built-in extension COMPOSITE
    [ 23.898] Initializing built-in extension DAMAGE
    [ 23.899] Initializing built-in extension MIT-SCREEN-SAVER
    [ 23.899] Initializing built-in extension DOUBLE-BUFFER
    [ 23.900] Initializing built-in extension RECORD
    [ 23.900] Initializing built-in extension DPMS
    [ 23.901] Initializing built-in extension X-Resource
    [ 23.901] Initializing built-in extension XVideo
    [ 23.902] Initializing built-in extension XVideo-MotionCompensation
    [ 23.903] Initializing built-in extension XFree86-VidModeExtension
    [ 23.903] Initializing built-in extension XFree86-DGA
    [ 23.904] Initializing built-in extension XFree86-DRI
    [ 23.904] Initializing built-in extension DRI2
    [ 23.904] (II) LoadModule: "glx"
    [ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.909] (II) Module glx: vendor="X.Org Foundation"
    [ 23.909] compiled for 1.14.2, module version = 1.0.0
    [ 23.909] ABI class: X.Org Server Extension, version 7.0
    [ 23.909] (==) AIGLX enabled
    [ 23.910] Loading extension GLX
    [ 23.910] (II) LoadModule: "intel"
    [ 23.910] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.916] (II) Module intel: vendor="X.Org Foundation"
    [ 23.916] compiled for 1.14.2, module version = 2.21.12
    [ 23.916] Module class: X.Org Video Driver
    [ 23.916] ABI class: X.Org Video Driver, version 14.1
    [ 23.916] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 23.917] (++) using VT number 1
    [ 23.920] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.920] (==) intel(0): RGB weight 888
    [ 23.920] (==) intel(0): Default visual is TrueColor
    [ 23.920] (**) intel(0): Option "AccelMethod" "sna"
    [ 23.920] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 23.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 23.920] (**) intel(0): Framebuffer tiled
    [ 23.920] (**) intel(0): Pixmaps tiled
    [ 23.920] (**) intel(0): "Tear free" disabled
    [ 23.920] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 23.920] (II) intel(0): Output LVDS1 has no monitor section
    [ 23.920] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 23.920] (II) intel(0): Output VGA1 has no monitor section
    [ 23.920] (II) intel(0): Output HDMI1 has no monitor section
    [ 23.920] (II) intel(0): Output DP1 has no monitor section
    [ 23.920] (II) intel(0): Output HDMI2 has no monitor section
    [ 23.920] (II) intel(0): Output HDMI3 has no monitor section
    [ 23.920] (II) intel(0): Output DP2 has no monitor section
    [ 23.920] (II) intel(0): Output DP3 has no monitor section
    [ 23.920] (II) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
    [ 23.920] (==) intel(0): DPI set to (96, 96)
    [ 23.920] (II) Loading sub module "dri2"
    [ 23.920] (II) LoadModule: "dri2"
    [ 23.920] (II) Module "dri2" already built-in
    [ 23.920] (==) Depth 24 pixmap format is 32 bpp
    [ 23.926] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
    [ 23.926] (==) intel(0): Backing store disabled
    [ 23.926] (==) intel(0): Silken mouse enabled
    [ 23.926] (II) intel(0): HW Cursor enabled
    [ 23.926] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.928] (==) intel(0): DPMS enabled
    [ 23.928] (II) intel(0): [DRI2] Setup complete
    [ 23.928] (II) intel(0): [DRI2] DRI driver: i965
    [ 23.928] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.928] (==) intel(0): hotplug detection: "enabled"
    [ 23.929] (--) RandR disabled
    [ 23.956] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.956] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.956] (II) AIGLX: enabled GLX_ARB_create_context
    [ 23.956] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 23.956] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 23.956] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.956] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.956] (II) AIGLX: Loaded and initialized i965
    [ 23.956] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.958] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
    [ 23.980] (II) intel(0): Setting screen physical size to 361 x 203
    [ 24.028] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 24.028] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.028] (II) LoadModule: "evdev"
    [ 24.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.031] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.031] compiled for 1.14.2, module version = 2.8.1
    [ 24.031] Module class: X.Org XInput Driver
    [ 24.031] ABI class: X.Org XInput driver, version 19.1
    [ 24.031] (II) Using input driver 'evdev' for 'Power Button'
    [ 24.031] (**) Power Button: always reports core events
    [ 24.031] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 24.031] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 24.031] (--) evdev: Power Button: Found keys
    [ 24.031] (II) evdev: Power Button: Configuring as keyboard
    [ 24.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 24.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 24.031] (**) Option "xkb_rules" "evdev"
    [ 24.031] (**) Option "xkb_model" "pc104"
    [ 24.031] (**) Option "xkb_layout" "us"
    [ 24.045] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 24.045] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 24.045] (II) Using input driver 'evdev' for 'Video Bus'
    [ 24.045] (**) Video Bus: always reports core events
    [ 24.045] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 24.045] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 24.045] (--) evdev: Video Bus: Found keys
    [ 24.045] (II) evdev: Video Bus: Configuring as keyboard
    [ 24.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
    [ 24.045] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 24.045] (**) Option "xkb_rules" "evdev"
    [ 24.045] (**) Option "xkb_model" "pc104"
    [ 24.045] (**) Option "xkb_layout" "us"
    [ 24.046] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 24.046] (II) No input driver specified, ignoring this device.
    [ 24.046] (II) This device may have been added with another device file.
    [ 24.046] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 24.046] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 24.046] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 24.046] (**) Sleep Button: always reports core events
    [ 24.046] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 24.046] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 24.046] (--) evdev: Sleep Button: Found keys
    [ 24.046] (II) evdev: Sleep Button: Configuring as keyboard
    [ 24.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 24.046] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 24.046] (**) Option "xkb_rules" "evdev"
    [ 24.046] (**) Option "xkb_model" "pc104"
    [ 24.046] (**) Option "xkb_layout" "us"
    [ 24.046] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 24.046] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 24.046] (II) No input driver specified, ignoring this device.
    [ 24.046] (II) This device may have been added with another device file.
    [ 24.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 24.046] (II) No input driver specified, ignoring this device.
    [ 24.046] (II) This device may have been added with another device file.
    [ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
    [ 24.047] (II) No input driver specified, ignoring this device.
    [ 24.047] (II) This device may have been added with another device file.
    [ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
    [ 24.047] (II) No input driver specified, ignoring this device.
    [ 24.047] (II) This device may have been added with another device file.
    [ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
    [ 24.047] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
    [ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
    [ 24.047] (**) Wacom ISDv4 E6 Pen: always reports core events
    [ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
    [ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
    [ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
    [ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 24.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
    [ 24.047] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
    [ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
    [ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
    [ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
    [ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
    [ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
    [ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
    [ 24.047] (II) No input driver specified, ignoring this device.
    [ 24.047] (II) This device may have been added with another device file.
    [ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
    [ 24.047] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
    [ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
    [ 24.047] (**) Wacom ISDv4 E6 Finger: always reports core events
    [ 24.047] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
    [ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
    [ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
    [ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
    [ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
    [ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
    [ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 24.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
    [ 24.048] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
    [ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
    [ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
    [ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
    [ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
    [ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
    [ 24.048] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
    [ 24.048] (II) No input driver specified, ignoring this device.
    [ 24.048] (II) This device may have been added with another device file.
    [ 24.048] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 24.048] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.048] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 24.048] (**) AT Translated Set 2 keyboard: always reports core events
    [ 24.048] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 24.048] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 24.048] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 24.048] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 24.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 24.048] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 24.048] (**) Option "xkb_rules" "evdev"
    [ 24.048] (**) Option "xkb_model" "pc104"
    [ 24.048] (**) Option "xkb_layout" "us"
    [ 24.048] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
    [ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 24.048] (II) LoadModule: "synaptics"
    [ 24.048] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 24.050] (II) Module synaptics: vendor="X.Org Foundation"
    [ 24.050] compiled for 1.14.1, module version = 1.7.1
    [ 24.050] Module class: X.Org XInput Driver
    [ 24.050] ABI class: X.Org XInput driver, version 19.1
    [ 24.050] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 24.050] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 24.050] (**) Option "Device" "/dev/input/event11"
    [ 24.148] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 24.148] (**) Option "TapButton1" "1"
    [ 24.148] (**) Option "TapButton2" "2"
    [ 24.148] (**) Option "TapButton3" "3"
    [ 24.148] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 24.148] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 24.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 24.188] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 24.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 24.189] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 24.189] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 24.189] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
    [ 24.189] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 24.189] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 24.189] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
    [ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 24.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
    [ 24.189] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
    [ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 24.190] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
    [ 24.190] (II) No input driver specified, ignoring this device.
    [ 24.190] (II) This device may have been added with another device file.
    [ 24.190] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 24.191] (II) No input driver specified, ignoring this device.
    [ 24.191] (II) This device may have been added with another device file.
    [ 24.191] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
    [ 24.191] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 24.191] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 24.191] (**) ThinkPad Extra Buttons: always reports core events
    [ 24.191] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
    [ 24.191] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 24.191] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 24.191] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 24.191] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
    [ 24.191] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
    [ 24.191] (**) Option "xkb_rules" "evdev"
    [ 24.191] (**) Option "xkb_model" "pc104"
    [ 24.191] (**) Option "xkb_layout" "us"
    [ 24.612] (II) intel(0): EDID vendor "LGD", prod id 728
    [ 24.612] (II) intel(0): Printing DDC gathered Modelines:
    [ 24.612] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
    [ 178.286] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 289.940] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 289.940] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
    [ 289.974] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
    [ 289.974] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 289.974] setversion 1.4 failed
    [ 291.433] (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by erdi13 (2013-07-29 20:19:11)

  • [SOLVED] urxvt + screen + zsh, title is not displayed correctly

    I use urxvt and screen inside it. The screen's  title is set up to display the current program and the window number. However after changing from bash to zsh, it always display "zsh" instead of "vim" or "top" which is currently running.
    my screenrc:
    # This is an example for the global screenrc file.
    # You may want to install this file as /usr/local/etc/screenrc.
    # Check config.h for the exact location.
    # Flaws of termcap and standard settings are done here.
    startup_message off
    #defflow on # will force screen to process ^S/^Q
    deflogin on
    #autodetach off
    vbell on
    vbell_msg " Wuff ---- Wuff!! "
    # all termcap entries are now duplicated as terminfo entries.
    # only difference should be the slightly modified syntax, and check for
    # terminfo entries, that are already corected in the database.
    # G0 we have a SEMI-GRAPHICS-CHARACTER-MODE
    # WS this sequence resizes our window.
    # cs this sequence changes the scrollregion
    # hs@ we have no hardware statusline. screen will only believe that
    # there is a hardware status line if hs,ts,fs,ds are all set.
    # ts to statusline
    # fs from statusline
    # ds delete statusline
    # al add one line
    # AL add multiple lines
    # dl delete one line
    # DL delete multiple lines
    # ic insert one char (space)
    # IC insert multiple chars
    # nx terminal uses xon/xoff
    termcap facit|vt100|xterm LP:G0
    terminfo facit|vt100|xterm LP:G0
    #the vt100 description does not mention "dl". *sigh*
    termcap vt100 dl=5\E[M
    terminfo vt100 dl=5\E[M
    #facit's "al" / "dl" are buggy if the current / last line
    #contain attributes...
    termcap facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%d;%dr:ic@
    terminfo facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%p1%d;%p2%dr:ic@
    #make sun termcap/info better
    termcap sun 'up=^K:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:IC=\E[%d@:WS=1000\E[8;%d;%dt'
    terminfo sun 'up=^K:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC:IC=\E[%p1%d@:WS=\E[8;%p1%d;%p2%dt$<1000>'
    #xterm understands both im/ic and doesn't have a status line.
    #Note: Do not specify im and ic in the real termcap/info file as
    #some programs (e.g. vi) will (no,no, may (jw)) not work anymore.
    termcap xterm|fptwist hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
    terminfo xterm|fptwist hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
    # Long time I had this in my private screenrc file. But many people
    # seem to want it (jw):
    # we do not want the width to change to 80 characters on startup:
    # on suns, /etc/termcap has :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l:
    termcap xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
    terminfo xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
    # Do not use xterms alternate window buffer.
    # This one would not add lines to the scrollback buffer.
    #termcap xterm|xterms|xs ti=\E7\E[?47l
    #terminfo xterm|xterms|xs ti=\E7\E[?47l
    #make hp700 termcap/info better
    termcap hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
    terminfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
    #wyse-75-42 must have defflow control (xo = "terminal uses xon/xoff")
    #(nowadays: nx = padding doesn't work, have to use xon/off)
    #essential to have it here, as this is a slow terminal.
    termcap wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
    terminfo wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
    #remove some stupid / dangerous key bindings
    bind ^k
    #bind L
    bind ^\
    #make them better
    bind \\ quit
    bind K kill
    bind I login on
    bind O login off
    bind } history
    # Modified Liberty, Display the status on the gnome terminal title
    #hardstatus string "[screen %n%?: %t%?] %h"
    termcapinfo xterm*|rxvt*|urxvt* 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
    hardstatus string "[screen: %w] %h"
    # scrollback buffer size
    defscrollback 5000
    Solved by adding this to .zshrc
    case $TERM in
    xterm*|rxvt*|screen*)
    precmd() { print -Pn "\e]0;%m:%~\a" }
    preexec () { print -Pn "\e]0;$1\a" }
    esac
    Last edited by helloworld1 (2011-04-12 16:25:53)

    I have
    defhstatus "^Et"
    in my .screenrc. Maybe there's something you like even better, e.g. there's also "^EH" which I used to use. Just checkout what can be done with defhstatus, you'll find what you want.

  • Installed the latest update and now Finder refuses to start/crashes

    Hey guys,
    I just installed the latest 10.4.11 update or whatever, along with Quicktime, iTunes, etc., and now when I log in to any account, Finder refuses to start. If it does start, it crashes.
    I've googled around and all I could find was that I should switch from one Admin account to another to stop it, but that looked outdated and didn't work anyway.
    I'm on a PowerBook G4, 10.4.11. Hopefully someone can tell me how to fix this soon.

    Hi, and a warm welcome to the forums!
    Actually, I take double posting to mean you started the same Topic in two different placesat once!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
    http://docs.info.apple.com/article.html?artnum=107120

  • TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
    Have you tried quitting Pages completely and the restart the iPad?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • N96 freezes/stuck when starting up and screen prob...

    Hi, I am new and i would like to know why my N96 stucks at a blank white screen when starting up, is this what they call the "White screen of death"? I currently uses firmware version 12.043.  Sometimes when I remove my microSD card and then turn on my cellphone, it starts up normally, is there something wrong with my microSD card? or is it my N96? If so, is there a way to fix this problem? Also, sometimes when I leave my phone on standby mode and it's backlight turns off, i can't turn the backlight back on or even turn off my cellphone, I tried turning off the lockguard, but it gets stucks with backlight off and only showing the battery status, and the time, is there something wrong with my cellphone? Any solution? Thank you in advance!
    Message Edited by reventon on 11-Apr-2009 01:18 AM

    If the phone refuses to start correctly when the microSD card is inserted but starts up normally when you remove the microSD card, then it certainly looks like the microSD card has a problem.
    It could simply be data corruption, in which case reformatting the memory card (in the phone!) should put things right. This might also have something to do with the other freeze-ups you mention.
    If formatting the card doesn't solve the problem then leave it out of the phone for a while and see if the phone carries on misbehaving. If there are no further problems with the memory card removed altogether then it's a fairly safe bet that the card is faulty.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have tak

    Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have taken with my nikon D500 and transferred to WINDOWS 8.1.  i have tried to re-install lightroom : the procedure asks for the serieal number , but refuses to accept the number that always worked. PLEASE help!!  jan

    If you are certain you have the right serial number, there really isn't much we can help you with here. You might try downloading and installing the last version of Lightroom 2. It will be the trial version, but when the trial screen appears there is an option to indicate that you have a serial number. Incidentally, Lightroom serial numbers start with the first four digits being 1160.
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 2.7 - English, French, German

  • Powerbook refusing to start up.

    Hi,
    My powerbook is refusing to start up, it gets to a white screen with the grey apple logo, and then stops, It just stays on that screen.
    i've used the install disc to use disk utility it verifies and repairs my permissions fine.
    But after trying to repair my disc has the disc contained an error, it couldn't complete it's task, the message i was given was:
    Keys out of order (this was in red)
    rebuilding catalog B-tree
    The volume Mackintosh HD not repaired
    Error: The underlying task reported failure on exit (-9972)
    and that was that.
    i've also tried doing a firmware boot. Now I'm really not sure what's going on? or what to do, I've got files on there which I havent had a chance to back up do to working on them at the time. And so I need them, any advice? is my hard drive failing? because this problem has cropped up a number of times but I've usually managed to get it back up and running after a few attempts.

    I had exactly the same problem!! but after i tried to repair the disk, fortunatly it managed to work. but then then as soon as i got the machine re-started i backed up the disk, did a 7 pass erase and then started from scratch.. it was a painful exercise but taught me the importance of an external back-up. What i would suggest is that you find another mac, and see if you can access your HDD via the other mac in firewire diskmode. This should enable you to get the data you need of your HDD and then do what i did... i.e. erase and re-install.. Hope that help.. and good luck.

  • Safari refuse to start up - Yosemite

    Safari refuse to start up in my iMac after installing Yosemite with updates ,,,
    It even don't want to be replaced with a new copy of Safari app in the Application folder.
    Any help in this please !!!
    Thanks,,,,

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • IMac starts with fan, screen stays black

    When attempting to start my iMac G5 (Ambient Light Sensor), fans come on but screen stays black. A couple minutes later, the fans rev up and run very quickly and loudly. This started happening when:
    1. One day the screen showed a green question mark with a message indicating that the computer needed to be restarted in a box
    2. Green lines were all across the screen
    3. I forced it to shut down by holding down the power button
    4. When I attempted to start it back up the fans started but the screen stayed black
    5. After a couple of minutes, the fans revved up
    This has been happening ever since. One time the computer started to the desktop but everything was frozen. I have reset the PMU, checked the diagnostic LEDs, reset the PRAM-basically everything suggested. Can anyone help? Thanks!

    Try the suggestions mentioned in the following Articles:
    http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display
    http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
    Strongly recommend that you update to OS 10.4.11. Your system info confirms you are still using the basic Tiger OS.

  • Firefox refuses to start up after I asked a question about aboutbrowser switch from "Google" to "Bing" I get error message "1712" and can't find a way to uninstall.

    Firefox refuses to start up at all

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    AIR give you classes to detect an on-line or off-line status, it's in 
    this way for the sake of flexibility for instance what happens if you 
    only what to sync  data only on Saturdays at 2 am? If it were done 
    automatically that'll be a problem. And it isn't so complicated.
    You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
      it's an application that does everything you have in mind.
    I don't understand your question abou file types.
    An AIR app can communicate with almost every backend served tech 
    CF, .Net, PHP, RoR.
    Sincerely,
    Michael
    El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
    >
    I have to say that I'm loving the picture! well cool!
    >
    Sorry but I don't quiet understand. I thought AIR did the updating 
    automatically? I didn't realise the developer had to program the 
    logic of how the updates take place?  Is it a case in most AIR apps 
    that when online the app updates the server and once every intervel 
    (of however long) the local SQLite DB is synced to the more updated 
    server DB. Then when offline the developer has to sense that the app 
    is offline and store a log manually of the updates without any help 
    from AIR itself, and then update once it comes online again?
    >
    Can AIR link to anything more than a database on the server side 
    apart from webservices, for example .as files or any other file types?
    >
    What type of server is a Flex app stored on, is it a specific Adobe 
    server rather than a Java or .NET server?
    >
    Thank you so much for your last comment!
    IrishAIRMax
    >

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

    This is the code which we have used.
    //////////Return if it is first time for the day or not//////////////
    + (BOOL)isFirstTimeToday {
    BOOL result = YES;
    NSDate *now = [[NSDate alloc] init];     /// represents the current time
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
    NSDate *today = [gregorian dateFromComponents:components];
    [now release];
    [gregorian release];
    NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
    if (savedDate) {
    if ([today earlierDate:savedDate] == today) {
    result = NO;
    return result;
    ////////Stores the date/////////////
    + (void)userDidVisitReenforceScreenToday {
    [[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
    ////////////What [NSDate todayAtMidnight] stores/////////////////////
    + (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
    NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
    NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
    [gregorian release];
    NSLog(@"dateAtMidnight : %@",dateAtMidnight);
    return dateAtMidnight;
    + (NSDate *)todayAtMidnight {
    return [self daysFromNowAtMidnight:0];
    Please Suggest..

Maybe you are looking for