Virtual component problem in Multisim 11
Hello all,
I am a Multisim beginner. I have a 3PDT switch in my circuit and when I try to Transfer to Utilboard it gives me an error message that this component will not be transfer because it is a virtual component. What does this mean and how do I solve this problem?
Thanks,
Hi Eth,
It means that there is no footprint assigned to this component.You should either replace it with a component that already has a footprint or make a footprint for that according to the datasheet.
Here you can find a great tutorial that helps you assign a footprint to a virtual component.
Tell me if you still had any problems with that.
http://digital.ni.com/public.nsf/allkb/364FC33F1DB69255862571B800632DC4
Regards,
Leila F.
National Instruments
Similar Messages
-
Problem in Multisim with transient analysis and initial conditions
Hello everyone,
I have a problem in multisim with transient analysis and initial conditions.
If I do transient analysis with automatically determined initial conditions the circuits works.
If I do transient analysis with user-defined initial conditions the circuits works in cases.
--Working with user-defined---
*## Multisim Component V2 ##*
vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
*## Multisim Component R1 ##*
rR1 3 0 10000 vresR1
.model vresR1 r( )
--Working with user-defined----------
*## Multisim Component V2 ##*
vV2 1 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
*## Multisim Component U1 ##*
xU1 1 0 MEMRISTOR__MEMS__1__1
--Not Working with user-defined-------
*## Multisim Component V2 ##*
vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} -3)
*## Multisim Component R1 ##*
rR1 3 1 10000 vresR1
.model vresR1 r( )
*## Multisim Component U1 ##*
xU1 1 0 MEMRISTOR__MEMS__1__1
The costum component includes something like that:
.subckt MEMRISTOR__MEMS__1__1 plus minus PARAMS:
*Parameters values
+rmin=100 rmax=390 rinit=390 alpha=1E3 beta=0 gamma=0.1 VtR=1.5 VtL=-1.5 yo=0.0001
+m=82 fo=310 Lo=5
blah blah ...
.ends Memristor
Namely, if I combine the resistor and my custom component in one circuit, transient analysis with user defined initial conditions gives an error (timestep too small).Hi Nik,
If possible, please post the Multisim file. This way, I can get access to all your settings.
Tien P.
National Instruments -
Hello Friends,
I have OrCAD library package of a component which has few files with extention .lib, .obk, .olb, .opj, .ind, .err, .log..
So I just want to know that how can I import these files into NI Multisim (v 11.2) and create this component on NI Multisim..
If somebody has the idea about this or a similar kind of solution then pease help me with it..
Thanks in advance.
Have a good day.Hi ,
<b><i>
1) Why i have this error and how can i fix it? Is it a problem inside my code? Or is it somewhere else?</i></b>
No problem at ur side .
There is no Executable Java file in the EJB . It will show like this for EJB applications . Don't worry about this . Just deploy .
Assign Points if you found helpful!
Regards.,
V.Rangarajan -
Slow component problem (logon page, login - logout)
Hi All,
since some time i'm experiencing a "slow component" problem with EP.
As a sympthom portal is slow during first logon page and during login - logout.
Jarm trace report the situation below:
Component Name Avg Gross Time (ms) Total Gross Time (ms) Max Gross Time (ms)
UME:SAPJ2EEAuthenticator:getLoggedInUser 90,045 450,226 n/a
AppServer:Security:Authentication:LOGIN:com.sap.security.core.server.jaas.SPNegoLoginModule 90,023 450,116 n/a
AppServer:Security:Authentication:FastLoginContext:login 90,022 900,229 n/a
AppServer:Security:Authentication:LOGIN:com.sun.security.auth.module.Krb5LoginModule 90,006 450,031 n/a
(90 seconds to load login page!!)
Seems to be an UME problem, but logs are OK and the configuration is the same of other systems that work fine.
Anyone has any idea ?
Thanks guru !
LorenzoHi,
I am dealing with exactly the same problem. I hope you should have fixed this problem by now. Please help me fix mine.
Many thanks in advance.
Regards,
Pawan. -
Sun Team: Help who are suffering with component problem(It's your product)
Why dont you help people who are facing problems using your IDE.
People expect more from you and after all its your product. I do agree the pain you had in developing this IDE. But atleast take a look and try to rectify the problems facing in using IDE.We all have faith in you and leaving this message to take as a grant.Please do favour in calendar component problem. As i already posted a comment regarding this.
Thank You in Advance,Hi there,
Sorry about the inconvinience you are facing. We are trying our level best to answer all your issues as best as we can. But with the forum posts increasing exponentially, it very diffucult for us to catch up wih all.
Please repost your problem again so we can help you.
Also we do have inexpensive paid support options which will get you quicker responses.
Please see
http://developers.sun.com/prodtech/javatools/jscreator/support/index.jsp
for details
Thanks
K -
Rectifier simulation problem in multisim
Hi, i've got a problem with my simulation results in Multisim. Why does it cut the voltage to <100V after the rectifier (see attached image)? I think on this computer is an old version installed but thats should be no reason for such behaviour.
When i build the rectifier out of 4 discrete diodes, it works.
Best regards,
hase
Attachments:
multisim.PNG 39 KBHase,
I checked the spice model for the rectifier that you are using and got it to work. I attached the picture that shows which variable you have to modify, it was set to 100V... that is why you would get that fuzzy thing going on... according to the datasheet it should work up to 1000V right?...
How to fix it.... double-click on the component... then from the value tab, click on the Edit Model button, and then on the spice text scroll down until you see the variable that is shown on the attached picture, you should see that it shows 100, change it to 1000. And then click on Change Part Model to finish. Give that a try, it should work.
Nestor
National Instruments
Attachments:
rectifier.JPG 23 KB -
11.1.2: Declarative-component problem!
Hi!
We're just evaluating 11.1.2. I converted some declarative components to 11.1.2/Facelets style, but I am running into problems.
As a test, I created some new components from scratch, confirming the issue.
I create a declarative component and choose "Facelets" and choose "Use custom component class".
JDeveloper then creates an entry in the jsf:
<afc:component>
<afc:display-name>testComponent</afc:display-name>
<afc:component-class>component.TestComponent</afc:component-class>
<afc:facet>
....After deployment, I just get an error. Facelets is reporting that there is no tag for "component-class", and examining component.taglib.xml in adf-richclient-impl-11.jar shows: Facelets is right! There is none!
Now, I cannot just remove the component-class entry. If I do that, then deployment works, but then JDeveloper creates during compilation a wrong "TestComponentComponent" class (which should extend TestComponent but doesn't!).
It just extends RichDeclarativeComponent, just like my original TestComponent class. All code in TestComponent is not available at runtime.
RichDeclarativeComponent
|
|
TestComponent <---- This class is now for the birdsand
RichDeclarativeComponent
|
|
TestComponentComponent <----- That class is used by the handlerIf I leave the component-class entry in, then - as expected - I get the correct hierarchy:
RichDeclarativeComponent
|
|
TestComponent
|
|
TestComponentComponentbut the component doesn't run.
So, now what? This cannot be the way it's supposed to work, can it. Manually edit the "component-class" stuff out of the jsf in the jar after deployment!?
Edit: Created SR 3-3856944401: Facelets-based declarative component with custom component class not working
Sascha
Edited by: Sascha Herrmann on Jun 17, 2011 6:41 PMThis is bug 12717940.
Sascha -
Leopard - QMaster and Virtual Cluster problem
Hi guys,
Up until yesterday I had my MacPro Octo running under 10.4 where I did succesfully set up a Virtual Cluster using 4 instances for Compressor. It worked as a charm and my MacPro was doing it's job perfectly.
Today, I made a bootable backup of my 10.4 install and installed 10.5 using the erase and install options ( clean install ). I installed all my software again and tryed setting up my Virtual Cluster again, using the same settings I had under 10.4. Sadly I can't seem to get it working.
In the QMaster Preferences pane, I have the QuickCluster with Services option checked. For the compressor entry in the Services I have the Share Option checked and used 4 isntances for the selected service. The Quickcluster received a descent name and the option to include unmanaged services from other computers is checked.
I have the default options set in the Advanced tab, ( nothing checked except log service activity to log file and Show QMaster service status in the Menu Bar). I then started the Cluster using the Start Sharing button.
Now I open u Compressor and add a file to process ( QT encode to iPod ), but when I hit the Submit button, my Virtual Cluster doesn't show up in the Cluster Dropdown. If I now leave the Compressor GUI open for 5 minutes, it will eventually show up in the list, and I can pick it. Sadly, picking it from the list at this point and hitting the Submit button makes Compressor Hang.
I checked my logs, but the only thing concerning Compressor I could find is this :
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:41 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'], server [tcp://10.0.1.199:49167]
4/12/07 20:12:41 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'
4/12/07 20:17:55 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488705.075513 218488675.075652) 1'], server [tcp://10.0.1.199:49167]
I tried Stopping and then Restart Sharing and I noticed the follwoing entries in my log :
4/12/07 20:23:26 compressord[210] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[211] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[213] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterca[269] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterqd[199] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:27 QmasterStatusMenu[178] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489009.603992 218489007.604126) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'
Batch Monitor immediately detects the cluster being active again, but Compressor doesnt, leaving me only This Computer available in the Cluster drop down when submitting a batch.
In my Activity Monitor, I notice that CompressorTranscoder is not responing ( the 4 CompressorTranscoderX processes are fine ) and the ContentAgent proces isn't responding neither.
Does anyone have any clue on what I could check next or how I could fix my problems ?
Thanks a lot in advance,
StefaanBah, this is crazy, today it doesn't work anymore. Yesterday my cluster was showing up in the Dropdown window, and I could submit a batch to it, and it got processed over my virtual cluster.
Today, after finishing the second part of my movie, I tried it again. I didn't change anything to my settings, my machine hasn't even rebooted (just recovered from sleep mode) and my cluster isn't showing up at all anymore. Even the Qmaster menu doesn't show it
Guess, I'll have to wait out until it appears again, or try a few things out -
Virtual function problem with SC 4.2
Hi
I'm using SC CC 4.2
[CC -V
CC: WorkShop Compilers 4.2 18 Sep 1997 C++ 4.2 patch 104631-04]
not the latest patch, I realize.
The following bit of code:
ProcessParameters *ppp = &(_config.process_params_);
ppp->save_to_file(String("abc"));
config.processparams_.save_to_file(String("xyz"));
does not work as I'd expect it to!
config.processparams_ is of type ProcessParametersEnhanced,
and the definition of this, and its base class, looks like:
class ProcessParameters
public:
virtual int save_to_file(String filename);
and
class ProcessParametersEnhanced : public ProcessParameters
public:
virtual int save_to_file(String filename);
(I've cut everything else out of the class definitions for clarity, and I've changed the names a bit as well, hopefully without typos).
ppp->save_to_file(String("abc"));
calls ProcessParameters::save_to_file(String)
even though ppp points to an instance of ProcessParametersEnhanced, and the function is virtual.
I've tried building a small test application, using the minimum class interfaces, but this works as I'd expect (it also works fine with gcc).
I'm getting deseperate. Is there a bug in SC4.2 whereby it fails to resolve virtual functions correctly?
TIA
Paul FloydOh well, it was an SC4.2 bug
Patch-ID# 104631-07
Keywords: C++ 4.2 SC4.2
Synopsis: SPARCompiler C++ 4.2: C++ 4.2 patch for Solaris 2.x
Date: Jul/17/98
4066271 C++ has a problem with a copy constructor using virtual and multiple inheritance
It seems as though the copy ctor doesn't copy the vtbl.
Cheers
Paul -
hi,
When i use fileupload component in my page, Turkish characters is not renderind and i see them as question mark. Changing page encoding is not working and solving my problem, too.
any suggestion would be appreciated.
Regards...I got exact the same problem, but with Chinese characters display. Does that means we can only use upload with English characters? Any solutions in the future?
Thanks, -
Creating Declarative Component problem.
Dear all
I use Jdeveloper 11.1.1.4.0.
I am planing to create an ADF declarative Component.The component will be a panel collection layout which contains menu (Action>Export to excel) and command button (Add new record).
The scenario will be like this:
1- The developer will drag my new component (myCustomPanel) to his page and will drag the data control inside this comonent to create ADF Read only table.
2- at runtime the table should appear surrounded by (myCustomPanel) and the user can use the "Action" menu to export the content to Excel, and can click on "Add new Record"to navigate to another page to add record.
The solution I made is:
in my "myCustomPanel" I created two attributes , the first one is "tableID" and the second is "targetPage" represents the outcome of the navigation to the "Add new record" page.
The developer must provide these two attributes when using "myCustomPanel".
The problem is:
at runtime when the user click on "Add new record" button an error is raised .
The error in this line:
<af:commandToolbarButton text="Add" id="dc_ctb1" action="#{attr.targetPage}"/>
the action property of the command button expects a managed bean. But i proved it with page attribute.
I want to dynamicly provides the naviation outcome to the button using attribute name. Is this possible?
regardsThank you so much for you replying.
Your solution is helpful
I tried to do the following :
1- in my "customcomponent" project I removed the attribute "taregtPage"
2- I added a method attribute
name: targetPage
method-signature: java.lang.String method()
<af:componentDef var="attrs" componentVar="component">
<af:panelCollection id="collection">
<f:facet name="menus">
<af:menu text="Action" id="dc_m1">
<af:commandMenuItem text="Export To excel" id="dc_cmi1"/>
</af:menu>
</f:facet>
<f:facet name="toolbar">
<af:toolbar id="dc_t1">
<af:commandToolbarButton text="Add" id="dc_add"
action="#{attrs.targetPage}"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:facetRef facetName="tableContent"/>
</af:panelCollection>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>dhamanTable</display-name>
<facet>
<facet-name>tableContent</facet-name>
</facet>
<attribute>
<attribute-name>tableID</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<required>true</required>
</attribute>
<component-extension>
<component-tag-namespace>dhaman.custom</component-tag-namespace>
<component-taglib-uri>/componentLib</component-taglib-uri>
<method-attribute>
<attribute-name>targetPage</attribute-name>
<method-attribute>
<attribute-name>targetPage</attribute-name>
<method-signature>java.lang.String method()</method-signature>
</method-attribute>
<required>false</required>
</method-attribute>
</component-extension>
</component>now My question is how to use it?
I do not understand this
action="#{component.handleTargetPage}" Do you mean that i will create amanaged bean "component" and add a methos "handleTargetPage"??
Edited by: ta**** on Mar 9, 2011 1:58 PM
Edited by: ta**** on Mar 9, 2011 2:00 PM
Edited by: ta**** on Mar 9, 2011 2:01 PM -
Custom Tag -- Custom Component problems with iframes
I have a "project" component that originally iterated over a list of models and created/renderered the corresponding (and fairly complex) interactive UI components for those models. On the client-side, the output from these were then organized neatly into "tabs" via CSS ... all on one page. Since these UI Components are so hefty, when any iteraction was done on one of them, the whole page had to re-render and things got just plain slow. To get around this limitation, I decided to have my "project" component no longer create the UI components himself, but instead generate an IFRAME that points to a page that will generate a single component. This way, any iteraction will just cause that single IFRAME to refresh.
Due to the fact that an IFRAME can only be populated by using the src attribute, I have created a page that contains a JSF View (<faces:view>) and inside is a single custom tag of mine (<mine:displayView>). Let's call this page singleDisplayView.jsf. I create iframes that point to singleDisplayView.jsf with different request params for each (singleDisplayView.jsf?modelName=Foo, singleDisplayView.jsf?modelName=Bar, etc.)
The displayView tag has one attribute called requestQueryString and I use the tag like so:
<t:displayView requestQueryString="<%=request.getQueryString()%>" />The displayView tag's class is DisplayViewTag. In DisplayViewTag::setProperties(UIComponent uiComponent) method, I get the model name out of the request map and set this property on the UIComponent.
The problem is that I'm noticing that as the main page (that contains these frames) loads, setProperties() is only being called twice. After that, the components created by subsequent iframes just seem to be using the modelName from the second frame.
Is there a syncronization issue I don't understand?
Any ideas?
Any help would be much appreciated.
Thanks in advance,
MarkOn a possibly related note, I read this in an article of the JSF application lifecycle:
In the first phase of the JSF lifecycle -- restore view -- a request comes
through the FacesServlet controller. The controller examines the request and
extracts the view ID, which is determined by the name of the JSP page.Could it be that the lifecycle is trying to reuse components from a single view, since all these iframes are pointing to the same page? -
my flash movie contains FLVPlayback component to play videos.
In the begining of the movie( frame 1) I have a simple pre-loader.
When I test my swf on a browser the pre-loader appear only after
few second, not immediately. (my pre-loader start from 40%). I
think the reason is that flash load the FLVPlayback component on
the first frame although my component appears only on the second
frame . Is there any work around this issue?
ThanksI am having the exact same problem. Thanks for info that this
is caused by movie being the same size as the stage. I am also
working on a solution and will let you know if I find one. -
COM Component problem with BPC Excel
Hi!
We are using BPC MS 7.5 service pack 3 version. Microsoft Office 2007
On one of our client machines we got problem when trying to enter BPC for excel,nothing appears and something is downloading showing Installing COM Component from http://activex.microsoft.com/objects/ocget.dll site. And after a while Excel is shut down.
It´s the same errro entering from Launch Page or Log on from native Excel.
We have already tried uninstalling and installing BPC client and uninstalling and installing Microsoft Office on this specific client machine with the problem.
Regards
FredrikThis was solved by this Microsoft fix:
http://support.microsoft.com/kb/323207/en-us -
I’m creating the full screen project but facing problem with the video component. All other project scenes is working properly but when I come in my video scene my project is crashing. Giving error with black screen. Please give the solution.
I use in my first scene first keyframe
stage.displayState = StageDisplayState.FULL_SCREENi don't have any idea
after using the ( stage.displayState = StageDisplayState.FULL_SCREEN ) code my video component is not working and project is showing the black screen. i try to find but i didn't get any solution of this problem. can you please help me
Maybe you are looking for
-
From N97 to HTC hero - Move contacts
I'm returning my N97 today to get a HTC hero. My mails, calendar, pictures, is no problem. But how do I transfer ALL my contacts? I can not use phone to phone Bluetooth, as I won't have both phones and the same time. I need to move the contacts to my
-
HELP! my iphone is showing up as someone elses
hi, i just synced up my iphone 4 with my wife's imac , trying to put some of my photos into her iphot. something terribly went wrong. all i remember was a progress bar was doing something on my phone, i paniced and i pulled my phone out of the comput
-
HELP ME! BEFOR I HIT MY MAC AGAINST THE WALL
I am having a huge issue every time I go on the internet. Everytime I click on a new link, and new tab opens up with (dating, mac backup, mac repair, backupmypc, and video download sites) HOW DO I GET RID OF the or stop them from popping up. Is there
-
From time to time I get in Mail the message that " no incoming mail can be received". I then have to go to >Mail >Preferences > Account information >Password and re-type my password >Safe. This opens up the incoming mail again. The strange thing is t
-
First you de-value our "Prized" Apple iPhones by $200, then you delete our post. Wah!!!!!! I just want apple to make it right. I've been a faithful customer since 1985 and have no problem joining the WINDOW FOOLS. I have been made a fool of for the L