Virual Key figure exit does not work

Hi,
Detail - We are trying to build a logic for a virtual key figure.
We have created a VKF (Virtual key figure) and added that in cube and respective multi-provider.
We also added that VKF into the query .
Now we are using following approach and it doesnot work -
Approach 1 -
We created BADi called ZBIVAR_IMP based on RSR_OLAP_BADI using SE19 transaction. In this definition , we included our class - ZCL_IM_BIVAR_IMP
We activated this BADi definition and then in our Z Class - we have 3 methods, define, initialize and compute. We activated break-point .
We wrote a code there and followed sample code of CL_EXM_IM_RSR_OLAP_BADI class.
Now when we try to excute our query from RSRT, system doesnot stop at our break-point. In another words, this BADi is not getting called.
We also observed following settings if that matters --
1) When we go to RSRT for the query name and click on option, "No paraller processing" is on.
2) When we go to RSRT and click on technical info, we see "Virtual key Figure" property is set to NO. If this needs to be changed then how do we do that?
3) We activated BADi definition but not sure if we need to activate BADi implementation , if yes then how?
Approach 2 -
We develop code in one of the BEx user exit called EXIT_SAPMRSRU_001
In this exit , we have include called INCLUDE ZXRSRU02 .
We donot have any other includes such as ZXRSRZZZ or ZXRSRTOP. To be frank , we donot know how to use these includes and where are those available to be used?
Problem of this approach is we cannot use C_S_DATA that gets final logic of key figure to be used in BEx report.
Both of these approaches doesnot work..
Your help in this regard will be highly appreciated.
Thanks,
Raj.

Hi BI technical folks..
I also have simillar issue at my place. Can someone help?
Thanks
A

Similar Messages

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

Key figure description for key figure YKFRFCFGD does not exist in liveCache

Dear SAP Gurus,
We have upgraded our APO 3.10 to SCM 5.1,
Sopport Pack details:
SAP_BASIS 700 16
SAP_ABA 700 16
ST-PI 2005_1_700 6
PI_BASIS2006_1_700 6
SAP_BW 700 18
SAP_AP 700 13
LCAPPS 2006_700 4
EA-IPPE 400 13
SCEMSRV 510 7
SCM 510 6
SCMBPLUS 510 6
SCMEWM 510 6
SCMSNC 510 6
SCM_BASIS 510 9
BI_CONT 703 10
QIE 200 5
ST-A/PI 01K_SCM500 0
and Live cache 7.4.02.29 from to 7.7.03.23
We facing following issue during APO operation in live cache.
Error details:
"Characteristic combinations with liveCache anchor but without time series"
"Key figure description for key figure YKFRFCFGD does not exist in liveCache"
"There is an inconsisteny between the key figure descriptions in liveCache and in the database. The key figure description of key figure YKFRFCFGD exists in the database but not in liveCache."
Kindly help me out on this.

Please execute Live cache consistecny check:
for Planning area , check all the option.
/SAPAPO/TS_LCM_CONS_CHECK
MPOS:
/SAPAPO/TS_PSTRU_CONS_CHECK
Manish

Key fn + Backspace does not work with apple wireless keyboard

Hello,
I want to user the WIndows Key DEL. However, the apple wireless keyboard dosn't have such a key. I read, that FN + Backspace will solve this. It does not work on my apple wireless keyboard. I'm using BootCamp 3.2 and WIndows XP, running on a Mac Mini 2010.
In addition, I also read, that FN + Cursor Left sould work like POS1. But this doesn't work, too.
Windows shows for the keyboard: Deutsch (Apple)
Regards Dirk

Hi mate,
This worked for me:
http://code.google.com/p/uawks/
Cheers,
Anthony

Shortcut key Ctrl+L does not work. How to fix it?

In my Photoshop Elements 9 and Photoshop Elements 11, The shortcut key Ctrl+L for Level does not work. I press it, the Level does not show up. How may I fix it?

1. Make sure that your image is in RGB mode. Go to Image Menu>Mode>RGB.
2. Check that no two layers are selected in the layers panel.
Even then the shortcut does not work , then it that case you can always use the workaround "Enhance Menu>Adjust Lightening>Levels.

Wep key and wpa does not work.

I'm trying to set up security for my router using wep or wpa but everytime I set it up, my key does not work. The router is suddenly disabled. I did exactly as the how to setup wireless security said. do u have to hard reset to get it to work. I've been trying to set security for three days. Your help is appreciated.

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
For WEP, you must enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.
Note that for WPA or WPA2, use "personal", not "enterprise".
Also, nomenclature sometimes causes problems. Note the following:
WPA = WPA with TKIP = PSK
WPA2 = WPA with AES = PSK2
Also note that Windows XP requires SP3 to run WPA2 ( = WPA with AES).
Also, each time you try a new encryption method, you must remove old settings from your computer. To do this, do the following:
In the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. You should connect automatically (it can take up to two minutes). If you still have trouble, in the computer, temporarily turn off your computer software firewall, and see if that helps.
If the above does not fix your problem, download and install the latest driver for your wireless card.

App Store "Option key for purchase" does not work to reinsatll Lion

Hello,
I was able to re-install Lion from the App Store
by holding the "option key" while clicking on "Prchased" in the App store
Since I upgraded to 10.7.1 this does not work anymore !
Is it the upgrade to 10.7.1 that"s preventing a new download ?
or
Is it Apple that cancelled that access ?
One way or the other how do I reinsatll Lion ?
Note: I have too many partition on my drive, so it did not create a "restore HD" for LIon
Thanks

My problem was resolved the following day, today. I went to the App Store then to Purchased. The associated button said Resume. Yesterday that had been totally unresponsive but today when I clicked it the download resumed for another minute or two and then Lion just installed. I presume that the system was just being pushed to the limit and beyond yeasterday.
I hope that you have solved your difficulty - good luck!

Virtual key figure BADI - does not change value

I wrote a badi for virtual key figure according to guidelines from an SDN doc on how to create virtual chars and kf's.
However, the value of the key figure is not changed at all. Below is my code. Please see what I'm doing wrong
method IF_EX_RSR_OLAP_BADI~DEFINE.
   APPEND 'ZRANKS' TO c_t_kyfnm.
endmethod.
method IF_EX_RSR_OLAP_BADI~COMPUTE.
if P_KYF_ZRANKS > 0.
    assign component p_kyf_zranks of structure c_s_data
    to <fs_ranks>.
    <fs_ranks> = '1.0'.
endif.
endmethod.

There is something you need to do which I have not seen described in any of the documention here.
You need to copy the source code for the INITIALIZE method directly from the code given in the example class CL_EXM_IM_RSR_OLAP_BAPI. That is where the P_KYF<object> and P_CHA<object> attributes are assigned their values. If you do not copy this code into your own implementation, these attributes have no value in the COMPUTE method and your code will probably not work.
Bryan

Control key (^) combined shortcuts does not work on mac book pro

All shortcut combinations with the control key (^) do not work. I´m using Mac Book Pro 13 (late 2013) with Os X Mavericks 10.9.4

The Logic Board is the Main system board. In the Windows world better known as the Motherboard. Except with Apple Mac computers the CPU and the GPU are Soldered to the logic board and if it is a Retina screen model the RAM is also Soldered to it.
So replacing the Logic board is like replacing the compete system and costs accordingly.
But there isn't much else you can do if you can't get that switch unstuck. Or just go without sound from the built in speakers. They aren't that good anyway.

Premiere Elements 7: track matte key video effect does not work?

I want to use the track matte key video effect to fade out some cropped video clips. So I did a test:
first track: video clip
second track: PNG file, black with white circle
third track: video clip with FX with second track (here: Video 5) and luminance
As you can see in the picture the small preview pic above the effects shows the effect like I expected: a circle with the content of the third, lowest, clip. But the large video preview shows the first clip.
What did I do wrong?
I tested other settings and track orders. No efforts.

Bill, thanks again for your help! Good tutorial. That's what I need in principle! My try was a bit more complicated ...
But I can't help. The white area stays (see screenshot top left corner). Only some of the small blurred area around the shape shines through as I could see playing around without blurring the video clip.
I used:
title with white (it is 100% white) shape and blur effect above
video clip with track matte effect and matte alpha on the title track, reversed (blur effect on whole clip like in the tutorial)
Rendering and export does not change anything.
I'm feeling a bit stupid.

Currency translation for key figure in bex not working.

Hi friends,
i want to do currency translation for key figure(invoice value in local currency).
i have followed the steps as under:
1st Transferring Global Table Contents: Currencies from R/3 Systems
2nd than transfer exchange rate - from r/3 to bi
3 than In SPRO settings of BW there is option "consider translation ratios in translation"
4th than used transaction RSCUR for creating currency translation type: parameter(exchange rate:m, soure currency fom data records, target currency ISK, time ref: current date)
5th than in BEX query designer have sated this for key figure
but when i run query in RSRT, curreny amount not getting convert?
am i missing any step?
pl. guide.
thanks dushyant.

Hi Dushyant,
Are these steps followed in Query designer??
In the Query designer, for that particular key figure property, under Conversion tab >> Currency Translation >> Conversion Type, select the currency translation type you created in RSCUR.
And in the target currency, select accordingly.
If you are going to use a variable, use the following link..
http://help.sap.com/saphelp_nw04/helpdata/en/08/81b98b95e911d4b2ca0050da4c74dc/content.htm
See also..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
Hope this helps..!
-Pradnya
Edited by: Pradnya Rane on Apr 8, 2009 7:58 AM

I deleted my SYNC Key and now realilze I want it. How do I reinstall it. The Sync Key under options does not work

I deleted the Sync Key, I thought it was just a refresh button and was not working. I have now read more about it, and want ot reinstall it, but when I go from tools>options.Sync, I get:
Incorrect account name or password: Update, reset or unlink
I have tried all three.
I know I made the error, but I don't know how to retrieve it. I have not shut my computer down, but I can;t seem to find it in my history either.
HELP ME PLEASE

User account – restore missing admin

WIN10 TP Build 10041 ask P.Key, and it does not work

Insider program, downloaded, installing in a VM Box, it starts, ask for the product key...
I try this one: NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
and It says It's not able to verifiy, all is stopped... How can I go on?
Does it need a network connection ? (But I think it should be on, in the VM I've set it up)
Thank you
P.S It's in Italian, does it matter?
P.S. 2 No, English (USA) has the same issue

There are 2 keys, one each for the Pro and Enterprise versions. You could instead try:
PBHCJ-Q2NYD-2PX34-T2TD6-233PK
I've done, it didn't worked either

HT2375 key rig 49 does not work?

how to set up key rig 49 M audio keyboard with logic pro9?

Apple has probably changed something in terms of USB compatibility.
Nothing shows up in Logic's transport (note names...etc) when you press the keys?

Customer Exit variable and Filter routine in DTP does not works?

Hello Experts,
Does anyone know what might be the possible reason - A customer exit variable working fine on the OLAP side does not work in a DTP??
I have also tried to use the Filter routine, which does not give me the right results..I am trying to fetch a Fiscalyear period maintained in an infoObject as follows in my Filter routine..
ata: sel_period like /BIC/PZPARAM-/BIC/ZPARAMVAL.
DATA: zperiod type /BI0/OIFISCPER.
          SELECT SINGLE /BIC/ZPARAMVAL INTO sel_period
          FROM /BIC/PZPARAM
          WHERE /BIC/ZPARAM = 'ZPCA'
          AND objvers = 'A'.
          zperiod = sel_period.
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'FISCPER'.
          l_idx = sy-tabix.
          l_t_range-iobjnm = '0FISCPER'.
          l_t_range-fieldname = 'FISCPER'.
          l_t_range-sign = 'I'.
          l_t_range-option = 'EQ'.
          l_t_range-low = zperiod.
          if l_idx <> 0.
            modify l_t_range index l_idx.
          else.
            append l_t_range.
          endif.
          p_subrc = 0.
Please let me know if I am making any mistakes above..
Kind Regards,
Kadriks

Hi
1. CLEAR l_t_range-high. is missing in your code befor assigning values to l_t_range.
2. use simple append l_t_range after the l_t_range asisgnments. remove below code :
if l_idx 0.
modify l_t_range index l_idx.
else.
append l_t_range.
endif.
p_subrc = 0.
3. I dont think you need to assign infoobject.
4. Clear sel_period and zperiod is also missing
Hence your code should be :
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'FISCPER'.
CLEAR l_t_range-high.
l_idx = sy-tabix.
l_t_range-fieldname = 'FISCPER'.
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low = zperiod.
append l_t_range .

Virual Key figure exit does not work

Similar Messages

Maybe you are looking for