Visual report issue with PP 2010 - Displaying too many years

Hi,
I am using project pro 2010. When I display a report (e.g. Resource Cost Summary), and if I add the Monthly Calendar field in the report, it displays 7 columns from 2010 to 2016 even though there is data only for 2014 and 2015. I need to manually
filter out all years with no data.
Is there a setup that would display only the years and months with data?
It was working fine before I update MS Proj.
Thanks!

Benoit1 --
First of all, do you have your copy of Microsoft Project 2010 patched with the most recent Service Packs and Cumulative Updates? If not, I would strongly recommend you do that.
I am not able to duplicate your problem, but there is a way to work around it. In the Excel PivotTable, click the Year pick list, deselect the years you do not want to see in your Visual Report, and then click the OK button.
Hope this helps.
Dale A. Howard [MVP]

Similar Messages

Issue with Word 2010

Hi Team,
We are facing issue with Word 2010.
User has created a document in Word 2007 and they inserted a symbol °C in Times New Roman and Areal.
Please find below the text which has issue.
干燥温度：60℃
温度：95℃，
In the document, instead of ℃ it is showing blocks, when we open it in MS Word 2010. (Eg: 60℃, 95℃).
We have tried the following.
1.       If we select the square and click on any other font, it will change to °C with formatted font Cambria Math. We can have it by selecting any font.
2.       I have tried to copy the line and paste it to excel/WordPad/notepad
• Excel(2010) : It is displayed properly(°C) but the font was Times New Roman and Arial as the word document has Times New Roman and Arial respectively.
• Notepad: It is displayed properly(°C) but the font was Lucida Console
• WordPad: The symbol is not displayed correctly (Squares and vertical lines). It is having the same issue as we have with word document.
3.       I just selected the whole text and had Ctrl+space , then all the corrupted characters turned to original one (°C with formatted font Cambria Math) : we can use this as a work around.
4.       I have created a word document and I typed °C in that document with fonts Times New Roman ,Arial, SimSun and STKaiti and saved the document. When I opened the document I was able to see °C properly.
Kindly help.
Regards,
Sooraj

Hi Sooraj:
For checking the encoding of your documents, please follow below steps:
Rename your documents from xxxx.docx to xxxx.zip
The zip folder will contains basically folders: rels, docProps, word and one [Content_Types].xml
Browse to word, open document.xml file,
<?xml version="1.0" encoding="UTF-8" standalone="true"?>,
the first line will suggest the encoding type of the document.
Except checking the encoding difference, could you please do one more thing that is copying the font like
“Times New Roman” from a computer which display the symbol correctly to the computer which has issue, and please let me know the results, thank you.

Sudden Issue with 23-inch displays?!

My 23-inch display went kaputz yesterday. It's interesting that today for the first time ever, I've come to these forums, hoping for an answer. How in the world can it be that suddenly this August, all of these 23-inchers are on the fritz?
What's up, Apple?!
(thank God for my old 22-inch display. I replugged it in and it's running like a charm.)

Several of us have expressed frustration with Apple's lack of response to this problem (which they obviously know about by now, and if they don't, there is no excuse), and the lack of a way to register any complaint beyond the level of your individual AppleCare person. Not knowing where else to turn, I sent an e-mail to the director of Mac PR, and the PR manager for Mac hardware, whose addresses are among the few on the Apple site (see site map).
As evidence that this is not just one person complaining but a true potential PR problem, I asked them to read this discussion and three others on the same issue: "Display not always turning on", "23" display not turning on problem", "Sudden issue with 23-inch displays", "23" cinema display -- bad adapter".
I summarized the complaints as:
1. Power adapters seem to be o failing in large numbers at the same time.
2. Many people are waiting for replacement power adapters through Apple Care, and they are not being shipped as promised.
3. Frustration with Apple's failure to step up to the plate and address this problem.
I asked for a response. So far, two days later, not even an acknowledgement from either one that they received my e-mail.
Maybe if they hear from more of us, they will see that, yes, this is a PR issue!

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

Digital Editions: The account you tried to log in with is activated on too many devices.

Digital Editions: The account you tried to log in with is activated on too many devices.
How do i reset it???
Chat does not run, my english is not got enough to call the hotline.
I didn*t find out how to contact adobe support by email :-(((
So, what can i do? Please help.
Otherwise, i can not read my ebooks any longer :-(((

The only people that I'm aware of who can reset your activation count is
the Adobe Help line that you call. And many of those people have to be
told that it is their job. This forum does not have the ability to forward
posts to Adobe technical support to get these kinds of problems resolved.
Trust in your English - or perhaps have a friend that speaks English better
do the talking.
I have to ask what you have been doing that used up all of the
activations. We need to fix the root of the problem.
=================

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Visual Report Issue

Hi,
I have an issue creating reports in Project 2010 using visual Report dialog box . in exporting it to report most of the fields comes more than 2 times when ever i am rendering it..Any resolution???
Sidra

Sidra,
Try to use the Field picker option in Visual Reports..Field Picker is to modify the fields included in the list of data to export. As
far as doubling is concern update your software if you are not using a file or document link with other versions.if yes try to save in which you are using. Secondly Rendering Report some times creates issues due to hardwares.
Regards,
Muhammad Enam UR Rehman

Is anyone having flickering or visual noise issues with the latest 27" iMac (2012-13)?

Hi everyone,
I received my 27" iMac a couple days ago via the online store. I've been so busy that I've hardly been on it, but I noticed last night that the entire screen was flickering to black. I looked closely and also noticed that there was very faint visual noise (or "snow") when the display would flicker on. In a panic, I shut down my computer and plugged it into another outlet to see if that could be the problem. I haven't noticed any problems since then, but I am skeptical as the initial incident was so random.
I have called Apple Care twice and they have been very helpful, but I also heard different versions of what to do: 1) Get an official diagnosis that it is in fact the hardware, and do a straight-up exchange, and 2) take it to an official Apple repair shop.
Either way, want to know if anyone else has had a similar problem; and if so, is it worth trying to get repaired? The repair shop was suggested because I'm about an hour drive from the nearest Apple retail store (which is frustrating in itself), but I would much rather get it exchanged than go back and forth with diagnostics and repairs.
Thanks for the help!
*Disclaimer: I am very satisfied with the Apple Care service I have been given thus far, just frustrated and disappointed that my brand new expensive computer is giving me problems out of the box, and that I'll have to travel to get it replaced. Not to mention I've already installed a bunch of fonts and software! Ugh.

I'm using a Spyder3Pro with the new iMac and haven't run into problems. I did bring down the brightness three notches before calibrating - that LED is very bright.
I know there were problems with the previous generation's glossy screens (too bright) but I've gone from the old matte version to this one and I'm loving it.

Issues with Macbook Pro display.

Hi. Recently, I haven't been having too much luck with Apple products. It started with my Macbook pro Core 2 duo 2.16. It had screen issues, leading to the screen being replaced (replacement screen contained several dead pixels), alongside a logic board, video card, and sound board replacement over the short life of the computer. Apple recently replaced it with a new 2.4 GHz Macbook Pro.
When I first turned it on, only 3 bottom pads made contact with my desk at all, causing the computer to become lob-sided. I brought it to the Apple store and they brought it to their back room to fix it (I am not sure about what they did to it though). The fix was mostly successful and brought the computer "within spec"... Shortly after the fix, I got home and my monitor started acting up by displaying black vertical bars along my screen. The left side of my screen was also disconnected from the aluminum frame; both issues can be seen at http://gallery.mac.com/eliete#100037 . The odd thing is that the issue only comes up every other time I use the computer, and closing-opening the clamshell usually cures the problem temporarily. I discovered that whenever I take a picture in Photo-booth, the screen flash aggravates the problem, making the issue very obvious, and obtrusive.
I do a lot of photography work with Aperture 2 and Photoshop Elements 6, and performance wise, the computer is fantastic, but what good is a fast computer with an awful screen? I do not want to switch back to the PC platform because the Mac OS is just that much better, and I rely on this computer for many everyday tasks. What do you think I should do? - I would rather not have the screen replaced due to the possibility of dead pixels (VERY irritating when editing photos), but it looks like that may be the only option. Do you think that I should wait until the WWDC to see what update the MBP will see, incase they replace my computer a second time? Thank You in advance.

First thing I'd to is take it to the Apple Store, you can talk with them about this. I'm sorry you have been having so much trouble, while Macs are good in general there are some lemons. I bought my current MacBook Pro in August. Within a few weeks of buying it, there were a handful of dead pixels on the display as well as a couple of pale spots (bruises that the Apple store said was my fault). I got the display (the entire top 1/2...display, iSight, etc.) replaced over Labor Day weekend and haven't had a dead pixel or blemish since then. If you wait until WWDC, there are two things to consider: 1) you will have the problem for a few more weeks, and 2) replacements may be refurbished laptops and not necessarily a new laptop. Why bother? If I were you, I'd take it in ASAP and see what options I'm given. If the screen is repaired and dead pixels arise, the screen can be replaced again. What's worse, the possibility of dead pixels, or putting up with the bad display for another month (or two...Apple has a history of introducing things at MacWorld and WWDC that aren't available until the following month)? Hope I helped.
-AHeneen

HT4623 iOS 8 version 8.1.2 issues with the calendar displaying wrong TIME ZONE!

I just updated to iOS 8 using version 8.1.2 and am having issues with the calendar. I use my GMAIL calendar and sync to my iPhone and now any calendar entries that I add from my phone display the current time zone AND GMT time. Entries that were already there display correctly. New entries entered from the GMAIL calendar also display correctly. The issue is with NEW entries entered on my PHONE into the calendar. This is very annoying and causes problems for new entries that need EDITED. Once opened to edit it defaults to GMT time! WRONG!! I have turned off the automatic time zone feature and Time Zone Override in Settings but it's still WRONG! There are multiple reports of this online so I would like to know when/if it will be corrected or if there is a fix! Please help!!

Quite the same problem here, GMT, UTC.......
Why when they do an update they don't check it completely???

Drill Down Report issues in VS 2010, CR viewer 12

We are using VS 2010, Crystal Reports 12 with Crystal Viewer 12 control called from a C# programmed page frame. Several Drill Down reports are developed with CR 12 service pack 1 and then deployed onto the server.
These Drill Down reports work great within the viewer. But Two critical issues have been discovered,
1.     With the drop down report, the next /last page buttons work on the main page, but it doesnu2019t work on any of the drill drop sections.
2.     The print / export functions work on the main page. Using the print / export functions from the Drilled down pages reverts back to the main page, not the drill down page that is being viewed.
Has anyone else seen these issues and know of a fix. Wondering if it might be something in the viewer settings within the .net or the version of viewer ?
I have viewed the CR .Net API Reference but probably due to lack of .net knowledge, seems overwhelming to me.
Thanks

Hello,
Hope you can use this code to export report in pdf with the drill down options/nodes.
CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
   /// Calling a sample report named Employee Sales.rpt with parameter
   rd.Load(Application.StartupPath + \\..\\..\\Employee Sales.rpt);
   rd.SetParameterValue("Login Name","Robert King");
   ISCDReportClientDocument rcd = rd.ReportClientDocument;
   ISCRPDFExportFormatOptions exportFormat = new PDFExportFormatOptionsClass();
   exportFormat.CreateBookmarksFromGroupTree = true;
   //Create an array of bytes of the report.
   PrintOutputController rasPrintOutputController;
   rasPrintOutputController = rcd.PrintOutputController;
   // Define the export format as PDF, and apply the PDF export options
   CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptions expOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptionsClass();
   expOpts.ExportFormatType = CrReportExportFormatEnum.crReportExportFormatPDF;
   expOpts.FormatOptions = exportFormat;
   // Use the PrintOutputController class to export the report based on the defined export options.
   ByteArray tempByteArray = rcd.PrintOutputController.ExportEx(expOpts);
   Byte[] byteStreamOutput = tempByteArray.ByteArray;
   // Create a new file(MyExportedReport) with the specified path, name, and file extension.
   FileStream fs = new FileStream("C:\\Windows\\Temp\\MyExportedReport.pdf", FileMode.Create, FileAccess.ReadWrite);
   // Stream the bytes from the exported report to the newly created file and close the file stream.
   int maxSize = byteStreamOutput.Length;
   fs.Write(byteStreamOutput, 0, maxSize);
   fs.Close();
   MessageBox.Show("Export is done in C:\\Windows\\Temp location");
Thanks.

RadAjaxManager issues with sharepoint 2010

I have two asp panels with ID's Panelcombo and PanelGrid .Panelcombo contains 6 comboxes and Panel Grid contains 1 radgrid. After filling all comboboxes I am showing Radgrid.I have RadAjaxManger with the following setting
<telerik:RadAjaxManager
ID="ajman"
runat="server">
    <AjaxSettings>
        <telerik:AjaxSetting
AjaxControlID="Panelcombo">
            <UpdatedControls>
                <telerik:AjaxUpdatedControl
ControlID="Panelcombo"/>
                  <telerik:AjaxUpdatedControl
ControlID="PanelGrid"/>
            </UpdatedControls>
        </telerik:AjaxSetting>
</AjaxSettings>
</telerik:RadAjaxManager>
                   Radgrid contains RadNumerictextbox which has Client event as follows
<ClientEvents
OnValueChanged="ValueChanged"
/>
                 which is not firing.
When I remove the RadAjaxManager event fires perfectly.After debugging using firebug it gives error on console
"Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace
is enabled"
I have tested my code(with RadAjaxManager) in visual studio it works perfectly.But it gives error in sharepoint 2010 environment .
For your reference http://www.telerik.com/forums/radajaxmanager-issues-with-client-side-event-of-radgrid

Hi,
I would suggest you do as follows:
1. Test your code in a ASP.NET Web Application project to see if the same error still exists;
2. Please apply other OOTB master pages to your site for a test;
3. As the limited resource we may have, it would be better to get a sample solution which can work in SharePoint 2010 environment from its official website, then deploy it to
your environment to see if it is an issue of your master page.
Feel free to reply with the test result or if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Visual report issue with PP 2010 - Displaying too many years

Similar Messages

Maybe you are looking for