VL10C _ order types and incoterms to create delivery _ but there is no selc

Hi Friends
Currently we are using VL10C  to create delivery through batch job , please refer our job job  u201Cdddu201D in SM37 .We will use variant u201C WWWu201D , which can be seen in the below screen attachments . Main selection criteria is  u201Cshipping point u201C500u201D and u201Cdelivery creation dateu201D . This job runs at 10 AM  regularly
Now current requirement is we have to add shipping points 600 and 800 for same batch job, for new shipping points (600 and 800)  , we have to add only selective  order types ( ZRRR and ZAAA)  and only below  selective incoterms 
VI.     BL - UPS 2 Day
VII.     UD - UPS 3 Day
VIII.     UO - UPS Next Day AM
IX.     UA - UPS Next Day PM
X.     US - UPS Next Day Sat
I am checking VL10C screen , there is no option to mention u201Cincotermsu201D in selection criteria . I donu2019t know whether itu2019s defect in standard SAP system .But system is not capable of meeting client business requirement .
I am researching but I could not come to conclusion on how to go about this requirement. I appreciate your ideas if you share with me on this .
Thanks in advance
Rusheek

Rusheek wrote:
Hi Friends
>
> Currently we are using VL10C  to create delivery through batch job , please refer our job job  u201Cdddu201D in SM37 .We will use variant u201C WWWu201D , which can be seen in the below screen attachments . Main selection criteria is  u201Cshipping point u201C500u201D and u201Cdelivery creation dateu201D . This job runs at 10 AM  regularly
>
> Now current requirement is we have to add shipping points 600 and 800 for same batch job, for new shipping points (600 and 800)  , we have to add only selective  order types ( ZRRR and ZAAA)  and only below  selective incoterms 
>
> VI.     BL - UPS 2 Day
> VII.     UD - UPS 3 Day
> VIII.     UO - UPS Next Day AM
> IX.     UA - UPS Next Day PM
> X.     US - UPS Next Day Sat
>
>
> I am checking VL10C screen , there is no option to mention u201Cincotermsu201D in selection criteria . I donu2019t know whether itu2019s defect in standard SAP system .But system is not capable of meeting client business requirement .
>
> I am researching but I could not come to conclusion on how to go about this requirement. I appreciate your ideas if you share with me on this .
>
> Thanks in advance
>
> Rusheek
First you must create separate batch job for the new shipping points unless you want to limit the selections for the first shipping point. Meaning if you filter on ZRRR and ZAAA order types only there is no option to limit that selection to the new shipping points (the filter will work for all shipping points entered). Each u201Cincotermsu201D should have it's own route so filtering on route would be best but also no option to use one batch job for three shipping points and use deferent selections for route and order type from one job.
Unless of course you create new variant and add to the job so the same job triggers VL10C two times, one with first variant and one w/new variant

Similar Messages

  • Order types, why do we need to create our order types and not use the stand

    HI
    Order types, why do we need to create our order types and not use the standard ones during implementation.

    Hi Raj,
    Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
    And by this way we keep unchanged the standard order type for further use.
    If you are sure that the standard order type satisfies your need you can directly use that only.
    I hope this clarifies the issue.
    Do reward if find useful
    Regards,
    Abhi

  • Order type and Item category group

    Can anyone tell me which is the relation between order type and Item category group from material master ??
    In fact the problem is that I have created a material and when I want to create new sales order it gives me this errror:
    "No item category available (Table T184 ZORDER ZITGR)"
    Is there a tranzaction where I can assign Item category group ZITGR to sale order type ZORDER or something like that??
    What should i do?

    Hi Dan,
    Goto T-Code VOV4 and maintain the table
    Sales Doc type + Item Category Group + Usage + Higher level Item Category = Item Category
    TA + NORM + Nil + Nil = TAN
    If you have Customized your own Document Type and Item Category Group and Item Category then give your
    Sales Doc type (ZORDER)+ Item Category Group (ZITGR)+ Usage + Higher level Item Category = Item Category (ZTAN)
    Reward if helpful
    Regards PAVAN

  • Planned order to prod order----order type and prod version/ routing

    Hi,
    My client produces a material in three different locations. The process at all the locations is same. Each location has the set of same work centers. We have differentiated the workcenters at the three different locations by naming conventions. I am mainting three counters in the routing with different set of work centers.
    We want different order types for the production orders processed at these three locations. Also I should be in a position to select the routing/ production version manually for the production orders processed at the three different locations. When I am creating a production order manually, I can select the order type and even the routing or production version.
    But here I am converting the planned order to production order. The system is picking the order type as maintained in OPPE. In OPL8 I maintained manual  selection of prod version. But version 1 is selected default by the system. Can I have any control over the selection of order type and prod version/ routing?
    Thanks and Regards,
    Raghu

    Dear,
    Selection of production version is only possible at manual creation of production order, but not when converting planned order to production order. you can manually change the production version if u want to in the planned order.When you have a planned order it would default contain a valid production version. So system would just take the Production version in the planned order to use the same in Production order. If you want to change the production version in production order then go to CO02-FunctionRead PP Master data and change it.
    (Goto OPL8 and select Manual Selection of Production Order in Production Version field
    And in MRP4 view of material master select - Selection only by production version as the option for the Selection method field )
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Authorization for order type and activity

    Dear all,
    is it possible to set the authorization in PS, that allow changes only for specific order types?
    Scenario:
    A user is allowed to display order type PS01.
    But he is also allowed to create/change/display the order type PS02.
    In transaction CN22 there is only the authorization object C_AFKO_AWK, which has the values for plant and order type, but the activity is missing. So if the user gets both order types and also transactions CN22 and CN23, he can change both order types.
    Is there a solution for this problem?
    Thank you!
    Regards,
    Stefan

    I tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
    - Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
    - One role should be
    M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
    - Second role should be
    M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
    Regards,
    Subbu

  • There is a mismatch between order type and GL accountu201D.

    Hello
    Can any one help me to know why I am getting this error message.
    Here  I am giving the steps carried out.
    Step1. Using transaction code: FB60 I have posted a vendor invoice to a Machinery account GL account against a internal order.
    Step2. A down payment using transaction code FBA7. using a special indicator M to a bank account.
    Step3. When I am trying to clear the open item  (by selecting above both documents) for the vendor using transaction F-44 system is giving an error message u201CThere is a mismatch between order type and GL accountu201D. System is prompting to correct the down payment entry, where I dint use any Cost centre, internal order.
    Checked the Internal order profile, AUC settlement profile etc and no able to find an error message.
    Can any one explain me why this error is coming and what need to be check in order to rectify it.
    Regards
    RS.

    Hi It looks that the field status of the Order Type and GL Account field status is being mistmatching with each other. You can check the field status group given on GL Account and the fields status in Order Type.

  • Assign ext material proc profile to order type and plant

    Hi friends ,
    I want to make purchasing group and purch organisation fields non editable for external material procurement.how can i do it.
    REgards
    AM
    Edited by: Amehra on Jul 4, 2011 8:26 AM

    Hi Mahesh ,
    I am not able to use it properly.
    I entered the tcode selected the field Purch Org
    clicked on button influencing
    Two fields are displayed :  item category and order type
    Selected Order type and then clicked influencing .
    Entered order type in Contents field and pressed enter
    But all the fields are in input form only.
    But when i go to order type there the Purchasing org field for material proc. is non editable
    but for the service proc its editable.
    I want to make it editable for material proc also.
    Regards
    Achal

  • Process Orders Types and Costing effect.

    Dear All,
    I have a query regarding the order type in process orders.
    There is an order type "Rework",. It can be used by the production people for some material(s) that may need only minute/little rework.
    Can anyone please help me to understand that if production guys instead of using order type as "rework" again assign the main work order type for the process orders that were basically meant for rework then what will be its cost implications.?
    Is this type is required to differentiate b/w the originally processed and reworked orders only and there is no other implications / consequences ?
    Hope, I am able to put my confusion here clearly.
    Thanking all you guys in advance.
    Regards,
    Yasir Shaikh.

    Wsalam Ajay.
    Thank you, I have been learning a lot from this forum and specially from you.
    Being new to CO, I believe it will take me some time to get used to the technical terms. please tell me that how to check the cost of rework specific to a CC, I am also unable to understand the 2nd part related to settlement object.
    PS, I was of the view that because if we use the default order type for a rework order, then keeping in mind our policy to valuate material at standard cost, we are overcasting / overvaluing our inventory.
    Please correct me as even I am confused on this.
    For example. For material AAA, and for Output of 1 Unit of AAA, we need 2 units of input material X, 2 units of input material Y, and 2 Units of input material Z. And now we have received material AAA for rework which only needs 1 units of material A .
    Now, if we will use default order type and not rework order type then by showing output of 1 unit of material AAA, it will be costed on a standard cost of material X, Y and Z for each 2 units.
    After this point , I am getting confused that if it is only a small consumption of new material then how can we assign the AAA with full cost of one unit of AAA.
    Thanking you.
    Yasir Shaikh.

  • Internal order types and number ranges

    We have two SAP instances and want to load Internal order types and number ranges and Internal orders from 4.6 to 4.5 version.
    I need to determine if there is an overlap of number ranges for the internal order types used in 4.6 and 4.5
    Could you please help me how to approach? Manually verifying each range in both system is a tedious job and very confusing as the numbers are too big.

    Hi,
    I can suggest one thing which seems to be worth trying. Involve one technical guy in downloading the number ranges as well the orders of the numbers used from both the system and compare it. Then compile them and upload it again.
    Trust this helps much!
    Cheers!

  • Disable the Item Availability Button based on Order type and Item category

    Hi ,
    My requirement is to disable the Item availability check button in VA01 based on the Order Type & Item category. Is there any user Exits/ Badi / FM available for this.
    Thanks in advance.
    Srinivas.

    Hi,
    Although it is an old post I need to answer for people who search an answer to the same type of question. To hide a field
    you can use transaction variant 'tcode:SHD0'. But it is not based on Order type and Item category. May be you can use
    USEREXIT_FIELD_MODIFICATION form in user-exit MV45AFZZ. You can loop at screen and set screen-active = 0 in fields
    where you want them to be inactive.

  • Link Between Sales Order Type and Customer/Material Exclusion

    Hi,
    Any one know the  Link Between Sales Order Type  and Customer/Material exclusion tables (Transaction: VB03 ) ?

    Hello,
    For Tcode VB03 you can check KOTG001 for Customer/Material.
    Thanks &Regards,
    Abhijit

  • I'm in India and use Indian iTune store. But there are certain books which are not avaiable in Indian store but are there in US store. How can i get those books?

    I'm in India and use Indian iTune store. But there are certain books which are not avaiable in Indian store but are there in US store. How can i get those books?

    Hi Jai Shree Hari,
    Yeah, I don't see why you shouldn't be able to sign your friend's iTunes sign-on into iTunes, and then use that to download the books. You may need to also authorize your computer in iTunes with that ID in order to be able to re-download them to your device if you ever need to (not sure if this is absolutely required since most things live in the cloud now, but better to be safe than sorry.... ).
    Best of luck!
    Cheers,
    GB

  • I want to create ipple id but there is no option in my phone of none in pay

    i want to create ipple id but there is no option in my phone of none in pay

    Hi,
    Recently I purchased iPhone 4 and also faced the same problem. Then I found the solution on net, which is:
    Creating an account on iPhone, iPad, and iPod touch
    Open the App Store on your device.
    Find a free application on the App Store.
    Important: Before proceeding to the next step, you must purchase the free application by tapping Free. 
    Tap Create New Account.
    You'll need to read and agree to the iTunes Store Terms & Conditions. Tap Agree located at the bottom of the page to continue.
    Choose your country, then tap Done.
    Enter your email address, security question, birthday, and create your password. Tap Next.
    Select None as your payment option.
    Continue to fill out the required email, address, and phone number fields. Tap Next.
    You'll then see a screen that says "Verify your Account." Tap Done and check your email for a verification email from iTunes Store.
    Open the email and click the link enclosed in the email to activate your account.
    Once you tap the link, the App Store should automatically open and then prompt you to sign in with your account name and password.
    Tap Sign In then when prompted and then tap Use Existing Account.
    You'll then see a Congratulations screen. Tap Done to be taken to the App Store home page.
    try this one.

  • I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    Load the drivers and you should then be able to add it in Print Center.

  • Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Do as Mylenium told you. If you don't know where it is. Go to www.adobe.com, sign in, search for the cc cleaner tool downloader and it should fix the issues. Have you went into your control panel, under programs and features and removed it from there?

Maybe you are looking for