VM inventory with PowerCLI - number of virtual sockets
Hi to everyone. I am relatively new to PowerCLI although I have experience in working with PowerShell so logic behind PowerCLI is familiar to me. Today I was given a task to create a report for all virtualized SQL servers containing info about number of virtual sockets and number of cores per socket. What is the property for number of virtual sockets and where it can be found? Number of cores per socket is located in extensiondata.config.hardware.numcorespersocket in vm object, there is also numcpu property but this is "total" number of CPU (virtual socket number x number of cores per socket). I can create property numcpu/numcorespersocket and get what I need but sure there must be some property for this since it is very important one.
Hi,
Does anyone has an answer to this? I am trying to pull up the No. of virtual sockets for each VM. Help please.
Similar Messages
-
Inventory with Serial Number Material
Hi Experts,
I´ve been trying to create a recount (MI04) for a material with Serial Number.
Currently I have in one Storage Location more than 100,000 pieces of this material.
So when I try to do the counting, all SAP functions get blocked and it doesn´t end the process.
I have a limit of numbers to count?
It seems that the lock table overflows.
Any suggestions how can i manage this counting?MI04 is enter count, MI11 is create recount.
A physical inventory document can maximum have 333 items.
100,000 pieces of this material can be just one record or 100000 different inventory records. this number does not tell much.
do you want to say that you have 100000 serial numbers for one material to be counted? -
Inventory Audit Report with Batch Number
Hi all.
I am trying to build a query that similar to the inventory audit report but with batch number. I want to know which batch number of each item is being charged out in deliveries or goods issue and which batch of item is being received. I am using SAP B1 2007A. Following is the query that I used to generate the inventory report (warehouse, itemcode, description, price, opening balance, receipt, issue, closing) but I don't know where to get the batch number information for it.
Declare @StrtDate Datetime
Declare @EDate Datetime
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Group nvarchar(10)
Declare @Whse nvarchar(10)
Set @FromDate = (Select min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >= @StrtDate)
Set @ToDate = (Select max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <= @EDate)
Set @Whse = (Select Max(s3.Warehouse) from dbo.OINM S3 Where S3.Warehouse = 'QA01')
Select
@Whse as 'Warehouse',
a.Itemcode,
max(a.Dscription) as 'Description',MAX(a.Price) as 'Price',
sum(a.OpeningBalance) as 'OpeningBalance',
sum(a.[IN]) as Receipt,
sum(a.OUT) as Issue,
(sum(a.OpeningBalance) + sum(a.[IN]) - Sum(a.OUT)) as Closing,
MAX(a.Price) * (sum(a.OpeningBalance) + sum(a.[IN]) - Sum(a.OUT)) as ClosingValue
from(
Select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,N1.Price,
(sum(N1.inqty)-sum(n1.outqty)) as 'OpeningBalance',
0 as [IN],
0 as OUT
From dbo.OINM N1
Where
N1.DocDate < @FromDate and N1.Warehouse = @Whse and N1.ItemCode Between '1C2K50NBAC' AND '7S2N40ADAM'
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription,N1.Price
Union All
select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,N1.price,
0 as 'OpeningBalance',
sum(N1.inqty) as [IN],
0 as OUT
From dbo.OINM N1
Where
N1.DocDate >= @FromDate and N1.DocDate <= @ToDate and
N1.Inqty >0
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription,N1.price
Union All
select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,N1.price,
0 as 'OpeningBalance',
0 as [IN],
sum(N1.outqty) as OUT
From dbo.OINM N1
Where
N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and
N1.OutQty > 0
and N1.Warehouse = @Whse
Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.price) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode
Order By a.Itemcode
I wish to create the report like Inventory audit report merge with the batch number transactions report.
Thanks.Dear Shobah, it can be possible by some custom report. Try some complementary bi solution for better analysis with SAPB1.
-
Problem with an enter inventory count for a material with serial number
Hi all,
I must post an Enter inventory count with the transaction MI04 for a material with serial number that it has more 250,000 of serial number, but the system give an error message of dump.
Are there any alternatives to post the inventory document?
Thanks.
Best regards,
Gaetanoyou can't but uplaod using LSMW rather entering manually otherwise you need coremod
-
Customized physical inventory upload with serial number
Hello SAP gurus,
My client have a requirement for physical inventory upload in bulk.
Their requirement is - they will create physical inventory document using MI31 and MIE1.
Then they will take printout of these documents- will add physical count into it.
Then they want upload this file to post difference.
They don't want to do it manually as they have large amount of data.
They also want to incorporate serial number in it.
My query is as we are posting difference using z-program with serial number-
1.if one material with serial number have stock 10 in unrestricated and 5 in quality.
different serial numbers are assigned to unrestricted an quality stock. At the time of entering count e.g.for Unrestricted if physical stock is 11 .
then system will ask for 11 serial numbers. they will provide 1 serial number for extra material which we can fetch from file.
But as we are doning in background , we want pick 10 serial numbers for existing material and again assign them. Same scenario may be for quality.
From where (table) I can find these serial numbers assigned to unrestricted and quality stock to pick and again assign to them?
2. I have query regarding physical inventory count for special stock e.g. sales order specific stock.
In which case special stock in SAP may differ from physical stock?
If in any sales order have 5 qty of material and in storage location have stock 4 or 6 for that sales order.
Correct me if I am wrong, because I am not able to understand physical inventory for special stock?
3. I got error for a special stock material i.e. sales order specific material under quality and with serial number- When I am trying to post
physical inventory differnce , then system gives me error - You can't post differences as serial requirement is set.
Post it by 711,712,713,714.
Why this error popup?Issue resolved. We have developed custom program for it.
-
How much Number of virtual processors for VMs
Hi,
there is lots more information about logical processors, cores and CPU and their definitions, on the internet. also here in this forum.
In order to make sure i am not lost on internet, it is better to take experts advice like you.
I have simple question read on:
I have a Hyper-v cluster host with 4 sockets (4 CPU's) with 6 cores each. so total are 24 cores.
I can see in hyper-v host Logical processors are 48. (which may be 1 proc = 12 logical processors, so 4 proc x 12 = 48 logical processors)
now how much virtual processors I can assign to each VM. I know I can assign more logical processor depending on application requirement. and it affects application performance. For each VM, it is showing maximum i can select 48 virtual
processors.
is it true I can select any number of virtual processors in each VM? is there any limitation?
is it that if i have 8 VMs if i set virtual processors to 6 then it will occupy all logical processors (48 in my case) and i will not be able to allocate logical processor to new VMs?
is it that if i have 10 VMs and all set to 10 virtual processors?
thank youQuite honestly - this math really does not matter that much with modern processors. (a combination of speed and core count, and advances in CPU scheduling in the hypervisor)
You have to have a VM with many vCPU to get into any point of contention.
In practice, It is very difficult to over-subscribe your CPU resources without hitting some other bottleneck first.
Set the vCPU count where it is appropriate for your workload. That means testing your workload to see where adding additional vCPU to a VM provides no benefit in throughput or speed or capacity for your application.
A select few applications are written in a way that there is a linear correlation between CPU count and throughput.
There is an old point about not assigning so many vCPU to a VM that the VM could end up with more than one execution thread on the same processor (core).
You have 24 cores. and each has 12 logical processors (execution threads). So, with zero CPU over-subscription you could have 288 vCPU assigned to any number of VMs. To expand my point in the previous paragraph - you can easily / safely go
over this count of 288 - what I am referring to above is an old guideline that would guide you to not assigning more than 288 vCPU to a single VM - ensuring that no single execution thread is trying to service more than one vCPU of the same VM.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Maximum number of processor sockets in Windows Server 2012 Datacenter and Standard
I have found no documentation on the technical number of supported processor sockets supported by Windows Server 2012 for the Standard and Datacenter editions.
Some donation websites like Techsoup claim that Datacenter supports 64 physical processors and Standard 8, but I can find no authoritative confirmation of this and those look like extrapolation from Windows Server 2008 R2.
So what are the maximum supported # of processor sockets, assuming you have licenses for all of them, for Datacenter and Standard? Do they differ by edition?
In addition, is it true that the total # of supported logical processors in a single system is 640 w/o Hyper-V? It was originally reported to be that, but since Hyper-V's number doubled from 160 in the Beta to 320 in the RC and RTM, did this double too?You might find some of the information you are looking for here -
http://download.microsoft.com/download/2/C/A/2CA38362-37ED-4112-86A8-FDF14D5D4C9B/WS%202012%20Feature%20Comparison_Hyper-V.pdf. I know there is one change that is not reflected there. Recently the maximum number of virtual machines supported
in a cluster was raised to 8,000 instead of the 4,000 reflected in this document.
The maximum number of sockets for Standard would be two because that is the maximum number that the license supports. Standard has never supported 8. Prior to 2012, it supported 4, and then the licensing changed with 2012 so that Standard would
be sold per processor (socket) with a maximum of two. Technically, the binaries are the same for Standard and Datacenter, so you can most likely get it to run with more somehow, but it is not a supported configuration.
The maximum number of sockets for Datacenter would be 64 - that has not changed from 2008. I make this statement based on the fact that Datacenter supports a maximum of 64 virtual CPUs when run as a virtual machine. Virtual machines don't have
the distinction of socket versus hyper-thread versus core. They see what is presented to them as a processor. But, I doubt very much that you will find any off-the-shelf 64 socket systems; most vendors are relying on the core densities instead
of socket density in order to deliver the horsepower. The above referenced document still shows 320 as the maximum number of logical processors, with or without Hyper-V.
tim -
SIP Trunk - No voice with Single Number Reach
Hi Community.
I setup SIP Trunk with the CCA. Everything is working Call In and Call Out. Call Forward and so on.
But with Single Number reach is something wrong. The mobile phone is ringing and I can get the call, but I hear not any voice.
Can someone please help me out? Below the config.
version 15.1
parser config cache interface
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
service compress-config
service sequence-numbers
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip domain name site1.365873.trk.ipvoip.ch
ip name-server 8.8.8.8
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
isdn switch-type basic-net3
voice call send-alert
voice rtp send-recv
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
sip
registrar server expires max 3600 min 3600
localhost dns:site1.365873.trk.ipvoip.ch
no update-callerid
voice class codec 1
codec preference 1 g711alaw
voice register global
mode cme
source-address 10.1.1.1 port 5060
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 23
voice source-group CCA_SIP_SOURCE_GROUP_CUE_CME
access-list 2
translation-profile incoming SIP_Incoming
voice source-group CCA_SIP_SOURCE_GROUP_EXTERNAL
access-list 3
voice translation-rule 9
rule 1 /0041449475090/ /90/
rule 2 /0041449475091/ /91/
rule 3 /0041449475092/ /92/
rule 4 /0041449475093/ /93/
rule 5 /0041449475094/ /94/
rule 6 /0041449475095/ /95/
rule 7 /0041449475096/ /96/
rule 8 /0041449475097/ /97/
rule 9 /0041449475098/ /98/
rule 10 /0041449475099/ /99/
voice translation-rule 410
rule 1 /^0\(.*\)/ /\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 411
rule 1 /^0\(.*\)/ /ABCD0\1/
voice translation-rule 412
rule 1 /^ABCD\(.*\)/ /\1/
voice translation-rule 422
rule 15 /^ABCD\(.*\)/ /\1/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
rule 1 /^9\([1-9]\)$/ /004144947509\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0041449475098/ /98/
voice translation-rule 2001
rule 1 /0041449475097/ /97/
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
voice translation-profile AA_Profile
translate called 2001
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PSTN_CallForwarding
translate redirect-target 410
translate redirect-called 410
voice translation-profile PSTN_Outgoing
translate calling 1111
translate called 1112
translate redirect-target 410
translate redirect-called 410
voice translation-profile SIP_Called_9
translate calling 3265
translate called 9
voice translation-profile SIP_Incoming
translate called 411
voice translation-profile SIP_Passthrough
translate called 412
voice translation-profile SIP_Passthrough_CallBlocking
translate called 422
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
fax interface-type fax-mail
license udi pid UC540W-BRI-K9 sn FGL163220SL
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret xxx
username xxx password 0 ""
username xxx password 0 ""
ip tftp source-interface Loopback0
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
no ip address
ip inspect SDM_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
load-interval 30
shutdown
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
no ip address
macro description cisco-desktop
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
no ip address
macro description cisco-desktop
spanning-tree portfast
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface BRI0/1/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.2 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 2 remark CCA_SIP_SOURCE_GROUP_ACL_INTERNAL
access-list 2 remark SDM_ACL Category=1
access-list 2 permit 192.168.10.2
access-list 2 permit 10.1.10.0 0.0.0.3
access-list 2 permit 192.168.10.0 0.0.0.255
access-list 2 permit 10.1.1.0 0.0.0.255
access-list 3 remark CCA_SIP_SOURCE_GROUP_ACL_EXTERNAL
access-list 3 remark SDM_ACL Category=1
access-list 3 permit 212.147.47.216
access-list 3 deny any
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip 192.168.10.0 0.0.0.255 any
access-list 101 deny ip 192.168.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 deny ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip 10.1.1.0 0.0.0.255 any
access-list 102 deny ip 192.168.1.0 0.0.0.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 103 remark SDM_ACL Category=1
access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 deny ip 10.1.10.0 0.0.0.3 any
access-list 103 deny ip 192.168.10.0 0.0.0.255 any
access-list 103 deny ip 192.168.1.0 0.0.0.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 104 remark SDM_ACL Category=1
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit ip any any
access-list 104 permit udp host 8.8.8.8 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone CH
station-id name FAX
station-id number 99
caller-id enable
voice-port 0/0/1
cptone CH
shutdown
caller-id enable
voice-port 0/0/2
cptone CH
shutdown
caller-id enable
voice-port 0/0/3
cptone CH
shutdown
caller-id enable
voice-port 0/1/0
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/1/1
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register mtpa4934c6ee4e0
dspfarm profile 2 transcode
description CCA transcoding for SIP Trunk VTX
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 10
associate application SCCP
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
destination-pattern 99
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description tcatch all dial peer for BRI/PRIv
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/1
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 98
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 97
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 96
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1000 voip
permission term
description ** Incoming call from SIP trunk (VTX) **
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1001 voip
corlist outgoing call-local
description ** star code to SIP trunk (VTX) **
destination-pattern *..
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1003 voip
description ** Passthrough Inbound Calls for PSTN from CUE **
translation-profile incoming SIP_Passthrough
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ABCDT
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1005 voip
description ** Passthrough Inbound Calls for MWI from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number A80T
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1009 voip
description ** Passthrough Inbound Calls for Internal Extensions from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ^..$
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1033 voip
corlist outgoing call-local
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0187
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1042 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1041 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1025 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[789]1.......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1020 voip
corlist outgoing call-national
description **CCA*Switzerland*Regional Announcement VM**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01600
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1040 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 000333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1043 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1035 voip
corlist outgoing call-national
description **CCA*Switzerland*Mobile Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 007[46789].......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1024 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Personal Numbering**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00878......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1029 voip
corlist outgoing call-national
description **CCA*Switzerland*Voicemail Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00860.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1036 voip
corlist outgoing call-national
description **CCA*Switzerland*VPN Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00869.............
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1027 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Premium Rate (Business)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00900......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1026 voip
corlist outgoing call-national
description **CCA*Switzerland*Test Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00868T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1034 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Shared Cost numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0084[0248]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1038 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1037 voip
corlist outgoing call-toll-free
description **CCA*Switzerland*Toll Free Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00800......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1039 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1032 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[23456]........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1023 voip
corlist outgoing call-international
description **CCA*Switzerland*International Calls**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 000T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1031 voip
description **CCA*Switzerland*Premium Rate (Social)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0090[16]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1030 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 014[0357]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1045 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1028 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Directory Enquiries**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 018[15].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1021 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 011[45].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1022 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01[67].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1044 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2003 voip
description ** cue auto attendant PSTN number **
translation-profile outgoing AA_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1110 pots
preference 9
destination-pattern xxx
port 0/0/0
no sip-register
dial-peer voice 3006 voip
description SIP
translation-profile incoming SIP_Called_9
session protocol sipv2
session target sip-server
incoming called-number xxx.
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
no dial-peer outbound status-check pots
sip-ua
keepalive target dns:site1.365873.trk.ipvoip.ch
authentication username xxx password 7 xxx
no remote-party-id
retry invite 2
retry register 10
timers connect 100
timers keepalive active 100
registrar dns:site1.365873.trk.ipvoip.ch expires 3600
sip-server dns:site1.365873.trk.ipvoip.ch
host-registrar
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 10
sdspfarm tag 2 mtpa4934c6ee4e0
video
fxo hook-flash
max-ephones 40
max-dn 300
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone ehookEnable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message SwissT.Net
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 521G-524G cp524g-8-1-17
load 525G spa525g-7-5-4
load 501G spa50x-30x-7-5-2b
load 502G spa50x-30x-7-5-2b
load 504G spa50x-30x-7-5-2b
load 508G spa50x-30x-7-5-2b
load 509G spa50x-30x-7-5-2b
load 525G2 spa525g-7-5-4
load 301 spa50x-30x-7-5-2b
load 303 spa50x-30x-7-5-2b
time-zone 23
time-format 24
date-format dd-mm-yy
keepalive 30 auxiliary 4
voicemail 98
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 xxx
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
service phone webAccess 0
softkeys remote-in-use Newcall
softkeys idle Redial Pickup Mobility Newcall Cfwdall Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer Mobility TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 292
number xxx
description SIP Main Number registration
preference 10
ephone-dn 293 dual-line
number 90 secondary xxx no-reg both
label Zentrale
description 90
name Zentrale
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 294 dual-line
number 94 secondary xxx no-reg both
label LL
description Lehrling Lehrnende
name Lehrling Lehrnende
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 295 dual-line
number 93 secondary xxx no-reg both
label CM
description
name
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 296 dual-line
number 92 secondary xxx no-reg both
label EE
description
name
mobility
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 297 dual-line
number 91 secondary xxx no-reg both
label RS
description
name
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 298
number 6.. no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 98
ephone-dn 299
number A801.. no-reg primary
mwi off
ephone-dn 300
number A800.. no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address A44C.11A0.B648
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:296 2:293 3m297 4m295
button 5m294
ephone 2
device-security-mode none
mac-address A44C.11A0.B566
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:297 2:293 3m296 4m295
button 5m294
ephone 3
device-security-mode none
mac-address A44C.11A0.B5C4
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:295 2:293 3m297 4m296
button 5m294
ephone 4
device-security-mode none
mac-address A44C.11A0.B67A
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:294 2:293 3m297 4m296
button 5m295
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
alias exec clid-ALL_BRI ;1:0-4;1:0-9;1:0-9;1:1-9
alias exec clid-SIP ;1:1-9;1:1-9;1:1-9
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Jul 04 13:18:33 CEST 2014^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
ntp server 91.240.0.5 prefer
enHi Patrick
I am working on this one as well. I have a UC560 with SIP Trunk provider Les.NET.
It was working fine until a few weeks ago when something changed on the provider end and broke it. My hunch it is something to do with the SIP REFER.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html
Here is an excerpt from the above page:
Call Transfer
When a call comes in on an SIP trunk to an SCCP Phone or CUE AutoAttendant (AA) and is transferred, the CME by default will send a SIP REFER message to the SP proxy. Most SP Proxy Servers do not support the REFER method. This needs to be configured in order to force the CME to hairpin the call:
Router(config)#voice service voip
Router(conf-voi-serv)#no supplementary-service sip refer
Figure 3 shows the behavior of the CME system with the REFER method disabled. -
How to change Number of test socket in Model option during run-time
I wanna be able to change the the number of test sockets(in the Model Options menu) during runtime. I have overriden the Prebatch callback and used my own instead. I have a LabView program in my Prebatch where I would select the test script each time before running the batch. I wann be able to also modify the number of test sockets each time before I run the batch again. I tried setting the "Parameters.ModelData.ModelOptions.NumTestSockets" from the Labview program which is in my Prebatch before running each batch, but get into errors. Please help?
Hello Kumar,
The Batch process model shipped with TestStand does not handle this scenario, but you can still do this. Attached is a sequence file that utilizes the Batch Model's ProcessCleanup callback to reset the next execution point. It still uses the method of setting the Parameters.ModelOptions.NumTestSockets variable in the PreBatch callback. The change I added was three steps to a different callback (the ProcessCleanup callback):
Message Popup - prompts Yes or No to continue testing with a new batch size.
Statement 1 - based on the response to the message popup (via precondition), resets the Batch Model's next step to be executed and the ContinueTesting flag:
RunState.Root.RunState.StepGroup = "Setup"
RunState.Root.RunState.NextStepIndex = 0
RunState.Root.Locals.ModelData.ContinueTesting = True
Statement 2 - based on the response to the message popup (via precondition), loops to reset each TestSocket's ContinueTesting flag:
RunState.Root.Locals.ModelData.TestSockets[RunState.LoopIndex].ContinueTesting = True
These two statement steps force the next step to be executed in the Batch Process Model to be the first step in the "Setup" step group, and reset all necessary flags for the batch itself and the individual TestSockets. I discovered the flags that had to be reset by trial-and-error (that was the time-consuming part).
You can run continuous batches of the same size you first chose (for as long as you like), but when stop the batch execution this new message popup will prompt (yes/no) whether you want to continue testing with a new batch size. If no, then processing terminates. If yes, then the next two statement steps are run and execution resumes back at the beginning of the Batch Process Model's Setup step group. This forces the ModelOptions callback to be executed again, so your VI (in my example here it's just a Message Popop) can then set NumTestSockets appropriately.
Thanks for contacting National Instruments!
David Mc.
NI Applications Engineering
Attachments:
kumar.seq 27 KB -
Update book inventory with NEW company code assignment for the same site
Hi gurus ,
Our company have this business scenario:
the site has run in Company Code A for several month with business of Material Management function, then the site have to be changed to Company Code B for financial requirement .
What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or sales document clearance , is there any way we can update the book inventory with new profit center corresponding to the CC B ?
Thanks in advance ,
RyanActually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18 for new CC assignment .
All other questions are under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this? -
Physical Inventory with serial numbers
Hi friends,
we are trying to post physical inventory with materials having serial numbers.
However during post the system gives 2 errors.
1)
Stock data of serial number 2 not suitable for movement
Message no. IO231
"The current stock information for the serial number 2 contradicts the stock information of the movement to be posted... "
2)
Serial number 2 cannot be used here
Message no. IO201
"You have entered a serial number already present in the system..."
Let me try to explain the situation.
For example we have two storage locations.
A material, say SERIAL, have some stocks in one storage location, say 0001, with serial numbers.
Assume that in the system serial number 2 of the material SERIAL is in the storage location 0001.
However, when physically counted, this serial number 2 shows up in the storage location 0002.
Therefore we would like to enter count for the storage location 0002 to post the serial number 2.
Doing so, we get the errors above.
Is there any solution to that problem? Thanks in advance.
Best regards,
YusufThank you Lakshman,
yes the stock transfer between storage locations or removal first from storage location 0001 with pyhsical inverntory can be done in the system. However I wonder is there any better way to do this, without making any abap development.
I would like to make a count for the storage location 0002 as in our case (or this can be a customer consigment either in another case). Here I expect the serial number 2 will be removed from storage location 0001 and will be placed in sorage location 0002 at the same time. Do you know any way of doing this?
Best regards,
Yusuf -
Jon,
I believe that this error is similar to a "connection reset by peer". It is
a Window specific error. I believe it indicates that something has happened
on the other end of the socket such that the socket has gone bad.
I think that this should only occur when people reset their connection
before the reply is sent. I don't believe that it is indicative of any
serious problem other than this communication failure caused by the client.
I've opened an issue to catch and squelch these spurious exceptions rather
than logging them. For now I think it is safe to ignore them.
Regards,
Adam
"Jon Mountjoy" <[email protected]> wrote in message
news:[email protected]...
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does aselect,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser,say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stoppedIO
exceptions that were being raised by the servlet when it tried to outputto
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhzusing
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socketinput
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, CompiledCode)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, CompiledCode)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java,Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)We are seeing the same error since switching to sp11 (we had been using
sp10). Haven't seen it in Solaris though. What is causing it?
Wed May 08 12:01:48 EDT 2002:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=3640 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java:259)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java:178)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:280)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
"John Slaman" <[email protected]> wrote in message
news:[email protected]..
>
I'm getting a error as follows:
Mon Apr 22 19:04:10 EDT 2002:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=2368 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
I have no idea as to the cause. It's been posted in the archives before -but with
no particular solution.
I'm using WLS 5.1 SP11, JDK 1.2.2_007. Win2000.
Does anybody know the cause/solution?
Thanks.
"Jon Mountjoy" <[email protected]> wrote:
Hi,
I have noticed that applying the service pack helps things quite a bit.
I no longer get NT muxer errors etc etc. just the "connection reset by
peer"
every now and again.
As I am repeatedly hitting the server from one browser, your 'connection
going bad' scenario probably
applies quite well.
(btw. before the SP, the errors seemed to crop up more just before/during
a
GC.)
Jon -
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does a select,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser, say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stopped IO
exceptions that were being raised by the servlet when it tried to output to
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhz using
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socket input
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java, Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)I have exactly the same problem running on Windows NT 4.0 (SP4) Weblogic 5.1 and
JDK1.2.2-001.
java.net.SocketException: ReadFile on fd=1048 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java, Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java, Compiled
Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Jon Mountjoy wrote:
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does a select,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser, say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stopped IO
exceptions that were being raised by the servlet when it tried to output to
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhz using
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socket input
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, Compiled Code)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java, Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code) -
REM Backflush Materials With Serial Number
Hi all,
We decideed to trace some materials with serial number. I have created serial number profile and assigned to the materials. But in REM confirmation SAP does not support backflushing materials with serial numbers. Cause of product cost collector i can not consume the material manually within inventory management.
How can i consume the materials with serial number in repetative manufacturing ?
Regards,
techmaster,Hello
Please check note SAP note 100621.
This note states that repetitive manufacturing does not allow to use serial numbers on the components.
BR
Caetano -
CO27, MF60 with serial number
Hi Everyone,
Does anybody know whether we can post goods issue for component with serial number using t-code CO27 and MF60... if can, how?
I know MB1A and MB1B works with serial number.
Best Regards,
BinHi Bin,
We can not post goods issue for component with serial number using t-code CO27 and MF60.
In case of Serial number, auto GI (using backflush) / auto GR (indicator in PSP or routing key) does not work.
Automatic goods movements are not permitted for materials that require serial numbers. However, if an automatic goods movement is specified for a material that requires a serial number then an error record is written. This error record can be displayed using the reprocessing function but it cannot be posted. Error records for materials that require serial numbers must be deleted manually. The goods movement must then be executed manually in inventory management.
Regards,
Sandeep
Maybe you are looking for
-
I am having trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.
-
How do i get a placed image to appear as image inside a layer?
There is a long winded reason why I want this, but in essence I am trying to replicate another artwork that has been supplied to me. When I place a Photoshop image (TIFF / PSD etc) how can I get it so that it simply appears as <image> inside the rele
-
Unable to communicate from adapter engine to Integration engine
Hi, I have a scenario as shown below. Target PI->File sender CC->Soap Receiver CC->SOAP Sender CC->Source PI The file is getting picked up using file sender CC but probably due to communication failure between file adapter and IE, the message is not
-
Queue monitoring, best practice
Hi, I have had a go at reading the Programming guides supplied on the website, however I still am unsure as to the best approach... Situation: Server1, Weblogic Server 8.1 with a JMS Queue. Server2, Tomcat 6.0.
-
Question about mouse track speed and interpolation.
To give context it's a regular practise for windows gamers to set their mouse/pointer speed to 6/11 (middle notch, 6th out of the 11) in your system settings. The reason being that setting provides a 1:1 ratio, signal from your mouse translating into