Vm Servers failing to start - Urgent HELP

Hi
I have suddenly found I cannot start any of my vm`s on our Oracle 3.0.3 vm server setup. If I stop any running vm`s I then get the following error on trying to start them.
Its the weekend and im trying to do some work while the office is emtpy and am now totally stuck and in trouble.
Also I do have a CSI (ordered 3 days ago) but aparently is not active (just called help line) and they cannot find any record of it. Something about takes 36 hours and I need to receive a welcome letter? As its the weekend (sun) I will have to wait until next week.
We currently have two vm hosts running for last few months without any problems. I did add on Friday a third host server but cannot really see how this could have affected it.
Error on starting vm`s follows
Any help/response would be nice
Nick Colyer
Job Construction Phase
begin()
Appended operation 'Virtual Machine Start' to object '0004fb00000600004582721d06a8ab47 (scripts.ex)'.
Appended operation 'Network Port Configure' to object 'network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)'.
Appended operation 'VM Set HA' to object '0004fb00000600004582721d06a8ab47 (scripts.ex)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [EthernetPort] network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)
Operation: Network Port Configure
Object (IN_USE): [VmDiskMapping] 0004fb0000130000f945246fe9077021
Object (IN_USE): [VirtualMachine] 0004fb00000600004582721d06a8ab47 (scripts.ex)
Operation: Virtual Machine Start
Operation: VM Set HA
Object (IN_USE): [VirtualDisk] scripts.img
Object (IN_USE): [Vnic] 0004fb0000070000dc0557c1dac9a1b8 (00:21:f6:33:00:10)
Job Running Phase at 10:12 on Sun, Apr 15, 2012
Job Participants: [53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc (ovm2.ex)]
Actioner
Starting operation 'Network Port Configure' on object 'network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)'
Completed operation 'Network Port Configure' completed with direction ==> DONE
Starting operation 'Virtual Machine Start' on object '0004fb00000600004582721d06a8ab47 (scripts.ex)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ovm2.ex failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:475)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:415)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:362)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:573)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:564)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:193)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1090)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:753)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:471)
... 23 more
FailedOperationCleanup
Starting failed operation 'Virtual Machine Start' cleanup on object 'scripts.ex'
Complete rollback operation 'Virtual Machine Start' completed with direction=scripts.ex
Rollbacker
Executing rollback operation 'Network Port Configure' on object 'network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)'
Complete rollback operation 'Network Port Configure' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [EthernetPort] network.EthernetPort (2) in 53:4d:43:49:00:02:38:90:25:00:38:90:25:00:bf:dc with MAC 00:25:90:38:dc:bf (network.EthernetPort (2) in ovm2.ex)
Object (IN_USE): [VmDiskMapping] 0004fb0000130000f945246fe9077021
Object (IN_USE): [VirtualMachine] 0004fb00000600004582721d06a8ab47 (scripts.ex)
Object (IN_USE): [VirtualDisk] scripts.img
Object (IN_USE): [Vnic] 0004fb0000070000dc0557c1dac9a1b8 (00:21:f6:33:00:10)
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=34470 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineDbImpl vessel_id=2790 method=start accessLevel=6
Class=VnicDbImpl vessel_id=1183 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=2775 method=lock accessLevel=6
Class=VnicDbImpl vessel_id=1183 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=2807 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=2775 method=lock accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=34479 method=notify accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=34479 method=setDescription accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=addJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setAssociatedHandles accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setAsset accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=34470 method=setFailedOperation accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=nextJobOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=2807 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=2790 method=nextJobOperation accessLevel=6
Class=VirtualDiskDbImpl vessel_id=2775 method=nextJobOperation accessLevel=6
Class=VnicDbImpl vessel_id=1183 method=nextJobOperation accessLevel=6
Class=EthernetPortDbImpl vessel_id=4943 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: dispatch to server: ovm2.ex failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
Sun Apr 15 10:15:29 BST 2012
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ovm2.ex failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:475)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:415)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:362)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:573)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:564)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:193)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1090)
at sun.reflect.GeneratedMethodAccessor886.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 start_vm 0004fb000003000026feea96455f02e2 0004fb00000600004582721d06a8ab47, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['xm', 'create', '/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg'] failed (1): stderr: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
, stdout: Using config file "/OVS/Repositories/0004fb000003000026feea96455f02e2/VirtualMachines/0004fb00000600004582721d06a8ab47/vm.cfg".
Sun Apr 15 10:15:29 BST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:753)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:471)
... 23 more
End of Job
----------

Looks like I have got around this problem.
I rebooted the 3rd (new) host server and was able to live migrate servers over to it. It would also allow me to start stopped servers on it as well.
Just had to live migrate all the servers from the other two host servers and reboot the host machines.
Once done everything seems to work and I can stop/start servers on any of the host servers.
Nick

Similar Messages

Updating to MAXDB 7.5.00.29- user logon failed error! Urgent Help

Hi
I am trying to update MaxDB 7.5.00 to MaxDB 7.5.00.29
on WAS 6.40. When I run the update via SDBUPD, I get the error "cannot establish database instance". i have looked in the log files(MaxDBUpdate_install-16.07.2005-16.13.log)
and the error is
user_logon failed
ERR
-24950,ERR_USRFAIL: user authorization failed
I am following "MaxDB update SAP note 735598" and under Windows section it states I should call the SDBUPD from the cmd prompt as follows:
SDBUPD -d <database_name> -u <dbm_userid>,<password>
so i run
SDBUPD -d J2E -u Administrator,portal
I assume <dbm_userid> is the default userid which is Admisitrator when installing WAS and MAXDB. I ahve not changed the default during the installation.
I have tried SAPJ2EDB as dmb_userid as well as J2EE_Admin, they still give the same error.
Any help on this?
Need urgent help
Much appreciated
RD
Message was edited by: RD

Hi
Thank you for your reply!!
I used control,control as user,password. This worked 100%, but then it reached to a point where it gave this error, i get this from the log file:
STDERR: test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation during open of existing file
What causes this error, and how can i get pass this ?
I assume some instance is started, but before I ran the SDBUPD, I stopped the J2E under sap system in SAPMMC.
Below is the output it gave when i ran SDBUPD from cmd prompt, I have bolded where the error starts:
D:\UpdatesPatches\MaxDB\maxdb-server-win-32bit-i386-7_5_00_29>SDBUPD -d J2E -u control,control
MaxDB INSTANCE UPDATE
starting installation Mo, Jul 18, 2005 at 08:57:11
operating system: Windows I386 NT 5.2 Service Pack 1
callers working directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7
500_29
installer directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_
29
archive directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_29
beginning to check sap db instances
start new instance update
finding instance type...
finding starting release...
finding migration strategy...
looking for running instances...
checking paramfile modifications...
looking for domain user...
checking data consistency for database migration...
switch database state to OFFLINE
checking SAP DB instance "J2E" successfully Mo, Jul 18, 2005 at 08:57:23
starting preparing phase of package Base 7.5.00.29 32 bit
update release check... ok
update binary magic check... ok
checking interferences to other packages... ok
collecting data finished:
independent data path: d:/sapdb/data
independent program path: d:/sapdb/programs
start extraction test run of "D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i38
6-7_5_00_29/SDBBAS.TGZ"
test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation dur
ing open of existing file
following programs are running:
dbmsrv.exe [pid = 876]
dbmsrv.exe [pid = 2496]
dbmsrv.exe [pid = 1460]
wahttp.exe [pid = 1420]
dbmsrv.exe [pid = 1188]

I got the MSCVR80.ddl message after I tried to do the latest update on Itunes. I went in and deleted all the related programs and reinstalled, but I keep getting a message during installation that "Service 'Apple Mobile Device' failed to start. Help!

I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Itunes error during install service apple mobile device failed to start.. help

I had to install Chrome browser in order to use my gmail account. Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer. During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok. Help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USN

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

ITunes is failing to start, Please Help!

Ok, I am having trouble opening up iTunes. First, when I clicked on the icon to start iTunes, a window came up saying, "The procedure entry point OpenServiceW could not be located in the dynamic link library MPlugin.dll." I didnt know how to fix this, so I posted a message on the 'Using iTunes for Windows' on the Discussion board. The reply that I recieved was "Delete MPlugin.dll from C:/Program Files/iTunes/Plugins/" I did that, and now, when I try to start iTunes, it says, "This application has failed to start because MPlugn.dll was not found. Re-installing the application may fix this problem." Im not sure if it is telling me to re-install iTunes, or if i should repair iTunes.... I have no clue. Please help!

I'll post the same thing I posted in another thread; it might help you. Reinstall itunes again according to my post. Some of the information is irrelevant to your problem, but hey, i'm kinda feeling lazy and don't want to edit it. You'll get the idea. Here it is.....
"this is just a suggestion. If you reinstall itunes again, make sure you follow the directions in the support section of this site for uninstalling itunes and quicktime. Another thing they don't say in that article that I did when i had to uninstall itunes was to do a search. You know, pressing the start button and then "Search". Make sure when you do, click the search "All files and folders". Then set it to look in "Local Hard Drives (C:)" or "My Computer"; i'm not sure which search will pop up your itunes files. Try them both. And then type in the "all or part of the file name" box, itunes. After the search is done you should have a bunch of different itunes components in the results. Btw do the same for quicktime as a search. Make sure to DELETE every itunes and quicktime file there. If some of your music files happened to come up in the search, use commone sense. Get rid of every component so itunes and quicktime is completely erased from the system. Make sure that you do this after you've already restarted your computer once (according, to the uninstallation article). Then just empty your recycle bin, reboot your computer, and finally reinstall itunes. Good luck and ask me anything if you have some questions!!"
Let me know if it works or not. Again, good luck!
Remember, this is just a suggestion, it's up to you if you want to do it or not.

Illustrator fails to open URGENT HELP

Whenever I go to open Illustrator CS5 Extended, I get this message: http://i52.tinypic.com/16m6ow6.png I went to these forums before and I looked at a similar issue, and they said to get the Cleaner Tool or something so I did, but it said I need to unistall the product. I went to go uninstall the product but this message came up: http://i51.tinypic.com/2emcsjc.png I've reinstalled the product twice now and it begins to work the first time I open it, but then starts this whole error message over again. If there's even a number I can call to help me with this, that's be great. I'm a graphic designer and I urgently need my Illustrator to get my job done. Thank you in advance.
:Run on W7, Asus Laptop

Nobody can say anything without some exact system info.
Mylenium

Xorg failed to start :: Please help

Hi there, I have been trying to start X for more than 3 days and I can't seem to find a solution to this. Sorry for my english and please can someone give me some tips on this. Here's my setup:
[root@ViruSzZ ~]# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series]
I installed Intel's and Ati's video drivers. I also tried using the ati's git version but none of them worked. Here's the /var/log/Xorg.0.log without using xorg.conf [ http://pastebin.com/wb4pqz69 ] and here's the ones using xorg.conf [ http://pastebin.com/wPULBM0z ] and the logfile [ http://pastebin.com/U4MN2ByM ].
I setup the above xorg.conf because when I try to generate it I get the following:
root@ViruSzZ ~]# Xorg -configure
X.Org X Server 1.9.2
Release Date: 2010-10-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.35-ARCH i686
Current Operating System: Linux ViruSzZ 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010 i686
Kernel command line: root=/dev/sda3 ro vga=773 radeon.modeset=0 i915.modeset=0
Build Date: 01 November 2010 10:35:30PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 5 17:23:39 2011
List of video drivers:
intel
ati
radeon
vesa
dlopen: /usr/lib/xorg/modules/drivers/vesa_drv.so: file too short
(EE) Failed to load /usr/lib/xorg/modules/drivers/vesa_drv.so
(EE) Failed to load module "vesa" (loader failed, 7)
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting.
Number of created screens does not match number of detected devices.
Configuration failed.
I never faced this kind of issue before. I have arch running on my desktop on GeForce 8600GT and on my other laptop with Intel chipset. Please if someone can help me with this so I can get Arch running on my brand new notebook.
Thanks and Respect
P.S."Please tell me if something else is necessary to provide"

Finally, I booted into DE (gnome in this moment). I needed to add the following inside my rc.local
modprobe radeon
echo "OFF" > /sys/kernel/debug/vgaswitcheroo/switch
After that gnome started successfully but the screen remained black (no brightness at all). I fixed the brightness with the following command:
echo 5 > /sys/class/backlight/acpi_video0/brightness
can someone explain why is this strange behavior ? I can manage to get all this steps automated and switch between the cards via vga_switcheroo, the only pain I have was the X server.
I am really really appreciated to this community. If there are some other tips on this please let me know.

Any application using webkit won't start (urgent help needed)

Hi,
Any application that needs webkit won't start anymore. The problem is (appears to be) in one specific folder: /System/Library/Frameworks/WebKit.framework
All reports point to that folder, i restored it from a time machine backup but the apps still wont start. Is there a way to reinstall webkit?
Applications include:
- Safari, Mail, App Store, Adium, Dashboard, Messages, Notes, Reminders, Spotlight in the menubar, iTunes....... pretty much every application i need to make my Mac usable.
All error logs show this:
pplication Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: __ZN3JSC14JSGlobalObject16putDirectVirtualEPNS_8JSObjectEPNS_9ExecStateERKNS_10 IdentifierENS_7JSValueEj
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Any suggestions on how to fix the webkit problem?
Thanks,
Jay

First, I'd check in Safe Mode and see if the problem still occurs. If it does it could be a startup item or plug-in that's interfering. If not, try re-installing Safari.
Not sure it will touch WebKit though, you you may need to boot to your Recovery Volume and re-install the OS. Not too bad because it's an install in place and shouldn't touch any data, files or settings.

Sync session failed to start? Help

Not sure what I need to do.... any suggestion?

Not sure what I need to do.... any suggestion?

TS1567 I followed this short tutorial,but I keep getting a error message. It reads "could not start AMD service on local computer error 1068: The depencey service or group failed to start" please help anyone?

Help

Try here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
And also the apporopriate topic of:
iOS: Device not recognized in iTunes for Windows

Messaging 3.x fails to start with "Unable to initialize" error

Messaging Server fails to start from the Admin Server or by using the "start" command.

# /etc/NscpMail start
Startup Problem:
Unable to initialize the environment from (/etc/netscape.mail.conf)
Netscape Messaging Server Exiting!

The Messaging Server log file will not show any entries.

The problem is most likely due to a missing dbswtich.conf
file or a zero byte file.

The default dbswitch.conf
file contains a single line:

directory default ldapdb:///usr/netscape/suitespot/userdb/ldap/config/lcache.conf/

Restore this file from a backup if possible.

Unlike Admin Server, Messaging Server will require the correct file to be
restored because it immediately looks for its postmaster entries in the LDAP
directory. If you cannot restore the file:
<OL>
<LI>Place a temporary entry into the
file.
<LI>Start the admin server.
<LI>Enter the correct values into Global Settings,
Configure Directory Service.
<LI>Attempt to start the Messaging Server again.
</OL>

Tracing utilities (e.g. truss in Solaris) can
help analyze problems where servers fail to start and return little or no
useful errors.

truss -f -o <trussfile> /etc/NscpMail start

grep dbswitch.conf <trussfile>.

This would usually show admin returning a ENOENT error or reading zero bytes of
data.

I assume when you say "mentioned solutions", those include:
- Generating xorg.conf with aticonfig --initial
- Blacklisting the radeon module
- Generating the fresh fglrx modules with catalyst_build_module all
Also, how've you set it up? AUR, graysky's repository or directly from AMD's website?
Last edited by clfarron4 (2014-09-15 12:16:09)

Session failed to start - after updating to IOS 7

I've updated to my iphone 4 to IOS 7 and now it won't sync with itunes. Its says "session failed to start". Help!

On the advice I got from others, here's what I finally did:
1. I connected my iPhone to my PC and backed it up to iTunes. Even though the phone doesn't sync, it will still back up and it did.
2. I then went in to settings on my iPhone under "Reset" and did the "Erase All Content and Settings", while still leaving my iPhone connected to my computer.
3. Once the phone booted back up, iTunes asked me if I wanted to restore my phone from back up. I chose restore and it restored my phone back and it is now working 100%. I'll add that it froze up during the restore process and I simply rebooted my PC and the ran sync and it finally worked. Took forever for my apps to all load back (couple of hours), but its fixed and working great.
I cannot tell you how upset I am with Apple. Many of us have this same issue and Apple has done nothing to help us or fix it. I've wasted 12 hours of my life on something that should have been simple and seamless. Isn't that the point of Apple and iPhones?

Itunes would not open "MSVCR.dll" is missing. I uninstalled and tried to reinstall itunes and got "apple mobilE devicE failed to start" message

itunes woUld not open. I got the message "MSVCR.dll is missing". I uninstalled and tried to reinstall, but got the message "apple mobile devicE failed to start". any help is appreciated.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Wily Introscope Enterprise Manager fails to start due to Java Heap

Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!

Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help

Vm Servers failing to start - Urgent HELP

Similar Messages

Maybe you are looking for