Updating to MAXDB 7.5.00.29- user logon failed error! Urgent Help

Hi
I am trying to update MaxDB 7.5.00 to MaxDB 7.5.00.29
on WAS 6.40. When I run the update via SDBUPD, I get the error "cannot establish database instance". i have looked in the log files(MaxDBUpdate_install-16.07.2005-16.13.log)
and the error is
user_logon failed
ERR
-24950,ERR_USRFAIL: user authorization failed
I am following "MaxDB update SAP note 735598" and under Windows section it states I should call the SDBUPD from the cmd prompt as follows:
SDBUPD -d <database_name> -u <dbm_userid>,<password>
so i run
SDBUPD -d J2E -u Administrator,portal
I assume <dbm_userid> is the default userid which is Admisitrator when installing WAS and MAXDB. I ahve not changed the default during the installation.
I have tried SAPJ2EDB as dmb_userid as well as J2EE_Admin, they still give the same error.
Any help on this?
Need urgent help
Much appreciated
RD
Message was edited by: RD

Hi
Thank you for your reply!!
I used control,control as user,password. This worked 100%, but then it reached to a point where it gave this error, i get this from the log file:
STDERR: test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation during open of existing file
What causes this error, and how can i get pass this ?
I assume some instance is started, but before I ran the SDBUPD, I stopped the J2E under sap system in SAPMMC.
Below is the output it gave when i ran SDBUPD from cmd prompt, I have bolded where the error starts:
D:\UpdatesPatches\MaxDB\maxdb-server-win-32bit-i386-7_5_00_29>SDBUPD -d J2E -u control,control
MaxDB INSTANCE UPDATE
starting installation Mo, Jul 18, 2005 at 08:57:11
operating system: Windows I386 NT 5.2 Service Pack 1
callers working directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7
500_29
installer directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_
29
archive directory: D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i386-7_5_00_29
beginning to check sap db instances
start new instance update
finding instance type...
finding starting release...
finding migration strategy...
looking for running instances...
checking paramfile modifications...
looking for domain user...
checking data consistency for database migration...
switch database state to OFFLINE
checking SAP DB instance "J2E" successfully Mo, Jul 18, 2005 at 08:57:23
starting preparing phase of package Base 7.5.00.29 32 bit
update release check... ok
update binary magic check... ok
checking interferences to other packages... ok
collecting data finished:
independent data path: d:/sapdb/data
independent program path: d:/sapdb/programs
start extraction test run of "D:/UpdatesPatches/MaxDB/maxdb-server-win-32bit-i38
6-7_5_00_29/SDBBAS.TGZ"
test pgm/sqltcp.dll failed: cannot extract pgm/sqltcp.dll: sharing violation dur
ing open of existing file
following programs are running:
dbmsrv.exe [pid = 876]
dbmsrv.exe [pid = 2496]
dbmsrv.exe [pid = 1460]
wahttp.exe [pid = 1420]
dbmsrv.exe [pid = 1188]

Similar Messages

Updating from MAXDB7.5 to MAXDB 7.5.00.29- user logon failed error

Hi
I am trying to update MaxDB 7.5.00 to MaxDB 7.5.00.29
on WAS 6.40. When I run the update via SDBUPD, I get the error "cannot establish database instance". i have looked in the log files(MaxDBUpdate_install-16.07.2005-16.13.log)
and the error is
user_logon failed
ERR
-24950,ERR_USRFAIL: user authorization failed
I am following "MaxDB update SAP note 735598" and under Windows section it states I should call the SDBUPD from the cmd prompt as follows:
SDBUPD -d <database_name> -u <dbm_userid>,<password>
so i run
SDBUPD -d J2E -u Administrator,portal
I assume <dbm_userid> is the default userid which is Admisitrator when installing WAS and MAXDB. I have not changed the default during the installation. Password "portal" is the password i entered during was +maxdb installation.
I have tried SAPJ2EDB as dmb_userid as well as J2EE_Admin, they still give the same error.
Any help on this?
Need urgent help
Much appreciated
RD
Message was edited by: RD

Hi RD,
I have just answered your question in your thread:
/thread/52043 [original link is broken]
Hope this helps to solve your problem,
Robert

RFC user logon failed R3077

Hello
RFC user logon failed.
Can anybody help me out for R3077
Its occuring regularly
Thanks And Regards
Akash Gupta

Hello akash,
Possible reasons :-
1> user must be of type "System" in logon data.
2> must be unicode "in RFC"
Rest you could follow this link :-
/thread/250014 [original link is broken]
Please do write to me at [email protected] in case of more queries.
Thank you.
Regards,
Manomeet
Award points if helpful **

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

User Authentication Failed Error: in XL Reporter

Hi,
I'm Using SAP Business One 2007B PL:05;
I cant able to access XL-Reporter in a Particular Company,
It is Saying the Error
Unable to Connect to XL-Reporter
Error: user Authentication Failed
I can able to access XL - Reporter in other Company's
Kindly guide to solve this Issue.

Hi,
In the add on Adminstration window, check if the add on is disabled in the user preferences tab,
Vasu Natari.

User Authentication Failed error when trying to display a JSP portlet

The steps carried out are as follows :
1. Created a JSP file named "c.jsp" and deployed it under 902_MidTier_Home\j2ee\home\default-web-app\examples\jsp
2. Created a table named USER_TABLE under Scott schema to store the usernames and passwords to validate this JSP application.
3. Registered this JSP as an external application with the following values :
Application Name : RAGHU
Login URL : http://hostname:port/j2ee/examples/jsp/c.jsp
User Name/ID Field Name : username
Password Field Name : password
Type of Authentication Used : POST
3. Clicked on the External Application and entered the username as USER1 and password as USER1 ( These values are available
under USER_TABLE for comparison ). Then it shows the message "Hi User1 .. Welcome message"
4. Now created a directory named JSPSAMPLE under "WEB-INF\Providers" and put the provider.xml file under this.
Created a raghu.properties file and placed it under "WEB-INF\deployment".
5. Now tested the testpage using the URL " http://hostname:port/jpdk/providers/raghu " and it works fine.
6. Registered this as a provider in Portal and added this portlet onto a page. Assigned this page to a newly created user.
It gives the message " Authentication Failed - Update Login Information " which is expected. I click on the link and
it takes me to the external application username password. I enter the credentials but this time it comes back again
to the page with the same message " Authentication Failed - Update Login Information ".
7. Basically the values are not passed to the Username and Password in jsp page which is why the problem occurs.
The JSP Code used is as follows :
<%@ page import="java.sql.*" %>
<HTML>
<HEAD><TITLE>DB Connectivity test</TITLE></HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER>
user_table
 
<%
String username = request.getParameter("username");
String password = request.getParameter("password");
Connection conn = null;
try
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection("jdbc:oracle:thin:@hostname:1521:iasdb","scott","tiger");
Statement stmt = conn.createStatement();
String query = "SELECT * FROM user_table where userid= '"+ username +"' and passwd = '" + password + "' " ;
ResultSet rs = stmt.executeQuery(query);
while(rs.next())
out.println("<TR>");
out.println(" <TD> hi " + rs.getString("userid") + ", welcome</TD>");
out.println("</TR>");
out.println("</TABLE>");
catch(SQLException e)
out.println("SQLException: " + e.getMessage() + " ");
while((e = e.getNextException()) != null)
out.println(e.getMessage() + " ");
out.println("invalid userid,password");
catch(ClassNotFoundException e)
out.println("ClassNotFoundException: " + e.getMessage() + " ");
finally
//Clean up resources, close the connection.
if(conn != null)
try
conn.close();
catch (Exception ignored) {}
%>
</CENTER>
</BODY>
</HTML>
The Provider.xml file used is as follows :
<?xml version="1.0" encoding="UTF-8"?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
 <providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
 <session>true</session>
 <authentication class="oracle.portal.provider.v2.security.Authentication">
 <authType>ExternalApp</authType>
 <userFieldName>username</userFieldName>
 <userPwdName>password</userPwdName>
 <errorPageMessages>Raghu,Please sign in,Sign me up!</errorPageMessages>
 </authentication>
 <portlet class="oracle.portal.provider.v2.http.URLPortletDefinition">
 <id>1</id>
 <name>RaghuPortlet</name>
 <title>Raghu Mail Portlet</title>
 <description>This portlet is to test Integration services using mail.yahoo.com</description>
 <timeout>100</timeout>
 <timeoutMessage>Raghu timed out</timeoutMessage>
 <showEdit>false</showEdit>
 <showEditDefault>false</showEditDefault>
 <showPreview>false</showPreview>
 <showDetails>false</showDetails>
 <hasHelp>false</hasHelp>
 <hasAbout>false</hasAbout>
 <acceptContentType>text/html</acceptContentType>
 <registrationPortlet>false</registrationPortlet>
 <accessControl>public</accessControl>
 <renderer class="oracle.portal.provider.v2.render.RenderManager">
 <showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
 <pageUrl>http://172.17.24.235:8888/c.jsp</pageUrl>
 <contentType>text/html</contentType>
 <filter class="oracle.portal.provider.v2.render.HtmlFilter">
 <useAuthLinks>true</useAuthLinks>
 <headerTrimTag><table width="100%" cellpadding=0 cellspacing=0 border=0><tr><td bgcolor=#9bbad6></headerTrimTag>
 <footerTrimTag><table width="100%" cellpadding=2 cellspacing=1><tr><td bgcolor=#9bbad6></footerTrimTag>
 <convertTarget>true</convertTarget>
 <redirectUrlFieldName>.done</redirectUrlFieldName>
 </filter>
 </showPage>
 </renderer>
 <securityManager class="oracle.portal.provider.v2.security.URLSecurityManager">
 <authorizType>registered</authorizType>
 </securityManager>
 </portlet>
</provider>
The Contents of raghu.properties file
serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/raghu/provider.xml
autoReload=true
Any inputs regarding why the values are passed properly in case of External Application but not so when registered as
a portlet in Portal.
Regards
Satish G

As I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1

I updated my iphone 3gs now am receiving a no service error, please help!

i updated my iphone 3gs OS now am receiving a no service error, what is the problem and how can i sort it out?

Probably because the phone was hacked to unlock it or jailbroken.

-2 ERR_USRFAIL: User authorization failed

Hello guys,
First to mention my system:
OS: Windows 2003 server
DB: MaxDB 7_7_06_17
I have one problem to connect through Database Manager to one DB instance that just now I have installed.
What I want to do is to install one MDM server.
The bellow are the steps that were already performed:
-installed Java server with sapinst (this created its database ZJD)
-after this Java server was finished installed I started to create one DB MDM instance using SDBSETUP.exe
-I was able to create this MDM instance successful
And the problem is here: This MDM database instance that was created with defaults users DBA and DBM. When the creation of this MDM was finished I tried to connect with both Database Manager and DBMCLI to MDM instance using these users but I am not able to connect. I get the   "-2 ERR_USRFAIL: User authorization failed" error. Can you tell me which is the reason?
I am sure that I typed the right user and password. I tried to uninstall all and installed again inclusive OS and the same error. I mention that to instance ZJD I am able to connect.
I tried with default users for Maxdb (DBA with pass: SECRET and DBA and DBM with pass: SECRET and DBM) but this doesn't work.
Can you help me to solve this problem?
Best regards,
Florin Radulea

Hello,
Bellow is the output for
sdbregview u2013l command:
package "DB Analyzer":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Base >= 7.7.06.17
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            bin/dbanalyzer.exe
IS SUBPACKAGE:        NO
DBANALYZER PATH:      E:/sapdb/programs
package "Server Utilities":
PACKAGE DIRECTORY:           e:/sapdb/programs
SOFTWARE VERSION:            7.7.06.17
PACKAGE VERSION:             0
VALID:                       YES
MODE:                        64 bit
MODIFICATION DATE:           13.04.2010
REQUIRE:                     Base >= 7.7.06.17
FILELIST:                    YES
HAS DISPLAY NAME:            NO
SCRIPT:                      YES
TEST FILE:                   bin/x_server.exe
IS SUBPACKAGE:               NO
INDEPENDENT PROGRAM PATH:    E:/sapdb/programs
package "PCR 7300":
PACKAGE DIRECTORY:        e:/sapdb/programs
SOFTWARE VERSION:         7.3.00.59
PACKAGE VERSION:          0
VALID:                    YES
MODIFICATION DATE:        13.04.2010
REQUIRE:                  Base >= 7.3.00.59
FILELIST:                 YES
HAS DISPLAY NAME:         NO
SCRIPT:                   YES
TEST FILE:                runtime/7300/pgm/libpcr.dll
IS SUBPACKAGE:            NO
PRECOMPILER 7300 PATH:    e:/sapdb/programs
package "PCR 7301":
PACKAGE DIRECTORY:        e:/sapdb/programs
SOFTWARE VERSION:         7.3.01.22
PACKAGE VERSION:          0
VALID:                    YES
MODIFICATION DATE:        13.04.2010
REQUIRE:                  Base
FILELIST:                 YES
HAS DISPLAY NAME:         NO
SCRIPT:                   YES
TEST FILE:                runtime/7301/pgm/libpcr.dll
IS SUBPACKAGE:            NO
PRECOMPILER 7301 PATH:    e:/sapdb/programs
package "PCR 7500":
PACKAGE DIRECTORY:        e:/sapdb/programs
SOFTWARE VERSION:         7.5.00.51
PACKAGE VERSION:          0
VALID:                    YES
MODE:                     64 bit
MODIFICATION DATE:        13.04.2010
REQUIRE:                  Base >= 7.5.00.51
FILELIST:                 YES
HAS DISPLAY NAME:         NO
SCRIPT:                   YES
TEST FILE:                runtime/7500/pgm/pgm64/libpcr.dll
IS SUBPACKAGE:            NO
PRECOMPILER 7500 PATH:    E:/sapdb/programs
package "Webtools":
PACKAGE DIRECTORY:    e:/sapdb/programs/web
SOFTWARE VERSION:     7.6.03.09
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              ODBC >= 7.6.03.09 64
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            pgm/webdbm.dll
IS SUBPACKAGE:        NO
WEBTOOLS PATH:        E:/sapdb/programs/web
package "SAP Utilities":
PACKAGE DIRECTORY:           e:/sapdb/programs
SOFTWARE VERSION:            7.7.06.17
PACKAGE VERSION:             0
VALID:                       YES
MODE:                        64 bit
MODIFICATION DATE:           13.04.2010
REQUIRE:                     Base >= 7.7.06.17
FILELIST:                    YES
HAS DISPLAY NAME:            NO
SCRIPT:                      YES
TEST FILE:                   bin/dbmrfc.exe
IS SUBPACKAGE:               NO
:                            E:/sapdb/data
INDEPENDENT PROGRAM PATH:    E:/sapdb/programs
package "Redist Python":
PACKAGE DIRECTORY:     e:/sapdb/programs
SOFTWARE VERSION:      7.7.06.17
PACKAGE VERSION:       0
VALID:                 YES
MODE:                  64 bit
MODIFICATION DATE:     13.04.2010
REQUIRE:               Base
FILELIST:              YES
HAS DISPLAY NAME:      NO
SCRIPT:                YES
TEST FILE:             bin/x_python.exe
IS SUBPACKAGE:         NO
REDIST PYTHON PATH:    E:/sapdb/programs
package "Base":
PACKAGE DIRECTORY:           e:/sapdb/programs
SOFTWARE VERSION:            7.7.06.17
PACKAGE VERSION:             0
VALID:                       YES
MODE:                        64 bit
MODIFICATION DATE:           13.04.2010
REQUIRE:
FILELIST:                    YES
HAS DISPLAY NAME:            NO
SCRIPT:                      YES
TEST FILE:                   pgm/dbmcli.exe
IS SUBPACKAGE:               NO
INDEPENDENT DATA PATH:       E:/sapdb/data
INDEPENDENT PROGRAM PATH:    E:/sapdb/programs
package "JDBC":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.6.06.05
PACKAGE VERSION:      0
VALID:                YES
MODIFICATION DATE:    13.04.2010
REQUIRE:              Base
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            NO
IS SUBPACKAGE:        NO
JAVA DRIVER PATH:     E:/sapdb/programs
package "Messages":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     MSG 0.7732
PACKAGE VERSION:      0
VALID:                YES
MODIFICATION DATE:    13.04.2010
REQUIRE:              Base
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            NO
IS SUBPACKAGE:        NO
MESSAGES PATH:        E:/sapdb/programs
package "ODBC":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Base >= 7.7.06.17
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            pgm/sdbodbc.dll
IS SUBPACKAGE:        NO
ODBC PATH:            E:/sapdb/programs
package "SQLDBC 77":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Database Connectivity >= 7.7.06.17
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            pgm/libSQLDBC77.dll
IS SUBPACKAGE:        NO
DBC PATH:             E:/sapdb/programs
package "Database Kernel":
PACKAGE DIRECTORY:    f:/sapdb/mdm/db
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Server Utilities >= 7.7.06.17
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            pgm/kernel.exe
IS SUBPACKAGE:        NO
DEPENDENT PATH:       f:/sapdb/mdm/db
PACKAGE DIRECTORY:    e:/sapdb/zjd/db
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Server Utilities >= 7.7.06.17
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            pgm/kernel.exe
IS SUBPACKAGE:        NO
DEPENDENT PATH:       e:/sapdb/zjd/db
package "Loader":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Redist Python >= 7.7.06.17
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            bin/loadercli.exe
IS SUBPACKAGE:        NO
LOADER PATH:          E:/sapdb/programs
package "SQLDBC":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Base
FILELIST:             YES
HAS DISPLAY NAME:     YES
SCRIPT:               YES
TEST FILE:            pgm/libSQLDBC.dll
IS SUBPACKAGE:        NO
DBC PATH:             E:/sapdb/programs
package "SQLDBC 76":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.6.06.07
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              Database Connectivity >= 7.6.06.07
FILELIST:             YES
HAS DISPLAY NAME:     YES
SCRIPT:               YES
TEST FILE:            pgm/libSQLDBC76.dll
IS SUBPACKAGE:        NO
DBC PATH:             E:/sapdb/programs
package "Fastload API":
PACKAGE DIRECTORY:    e:/sapdb/programs
SOFTWARE VERSION:     7.7.06.17
PACKAGE VERSION:      0
VALID:                YES
MODE:                 64 bit
MODIFICATION DATE:    13.04.2010
REQUIRE:              SQLDBC 77
FILELIST:             YES
HAS DISPLAY NAME:     NO
SCRIPT:               YES
TEST FILE:            pgm/libSDBLoader.dll
IS SUBPACKAGE:        NO
FASTLOAD PATH:        E:/sapdb/programs

"User authentication failed" when connecting with Visual Administrator

Hello,
I am having trouble making a connection to my local J2EE Engine using the Visual Administrator (VA).
I open the VA interface and create a new connection. The default User Name is "Administrator". I put in "localhost" for host, "50004" for port and leave the Transport Layer selection to "Default".
When I try to connect this way I get the following message:
User authentication failed
Next I went into Start|Settings|Control Panel|Users and Passwords and saw that there were several ids created by the Developer Workplace (DW) installation. The ids that I see are: j2eadm,sapadmin,sapinstall and SAPServiceJ2E
I checked all of them to see what groups they're members of and they're all at least members of "Administrators" group.
There are also 3 new groups that must have been created by the DW installation: SAP_J2E_GlobalAdmin, SAP_J2E_LocalAdmin and SAP_LocalAdmin.
The j2eadm id belonged to all 3 new sap groups so I changed its password to something I'd remember and then changed the connection to use that login.
When I tried to connect thru VA using this id and the new password I still get the "User authentication failed" error message.
Can anyone please tell me what I'm doing wrong?
Thanks in advance for any help.
David.

Hi,
During the installation the SAPINST asks for a Administrator Password.. This password is very important.
We had kept same passwords for all userids to start with.
This helped reduce lot of confusion.
Warning: if you enter the wrong password 5 times, the userid 'Administrator' gets locked.
However there is an Emergency password recovery procedures.
Try this link
http://help.sap.com/saphelp_erp2004/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
Hope that helps
Regards,
Siddhesh

Connection to host as user administartor failed

hi all
i am not an oracle DBA but have to perform some task on oracle server.
Dear all,
I have a problem when using host credential (operating system login
credentials) for utility like backup, recovery setting.
When I entered the username and password then occured like "Connection
to host as user "username" failed: ERROR: Wrong password for user"
The username and password is true, I used it for login to windows (my
window is Windows XP Professional )

yes i am an ora_dba user
and i am tryong to perform this in EM.
Below is the contents of sqlnet.ora file
# sqlnet.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
reards
imran

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

OIM - Error updating the Teminal Services Attributes for a Users AD account

Hi,
I am trying to populate 'Terminal Profile Path', 'Terminal Home Directory' and 'Terminal Allow Login' attributes for a users Active DIrectory account from the OIM admin interface. and the request keeps getting rejected in OIM.
*1) I get the below message in OIM -*
Response: non-JRMP server at remote endpoint
Response Description: Unknown response received
Error Details
Setting task status... "non-JRMP server at remote endpoint" does not correspond to a known Response Code. Using "UNKNOWN".
*2) Below are the error messages from the logs:*
2010-04-13 13:42:15,843 ERROR [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/getRemoteManagerInfo encounter some problems: No Remote Manager associated with current IT Resource.
2010-04-13 13:42:15,843 ERROR [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/getRemoteManagerInfo encounter some problems: INTERNAL_ERROR
com.thortech.xl.dataobj.util.tcAdapterTaskException: INTERNAL_ERROR
 at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRemoteManagerInfo(Unknown Source)
 at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.EXECUTEREMOTESCRIPT(adpADCSEXECUTEREMOTESCRIPT.java:646)
 at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.implementation(adpADCSEXECUTEREMOTESCRIPT.java:148)
 at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
 at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
 at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
 at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
 at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
 at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
 at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
 at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
 at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
 at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
 at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
 at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
 at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
 at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
 at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
 at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
 at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
 at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
 at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
 at org.jboss.ejb.Container.invoke(Container.java:960)
 at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
 at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
 at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
 at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
 at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
 at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
 at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
 at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
 at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
 at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
 at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
 at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
 at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
 at $Proxy758.setProcessFormData(Unknown Source)
 at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
 at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
 at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
 at $Proxy801.setProcessFormData(Unknown Source)
 at com.thortech.xl.webclient.actions.UserDefinedFormAction.editForm(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
 at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
 at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
 at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
 at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
 at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
 at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
 at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
 at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
 at java.lang.Thread.run(Thread.java:619)
2010-04-13 13:42:15,843 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/getRemoteManagerInfo left.
2010-04-13 13:42:15,843 DEBUG [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager entered.
2010-04-13 13:42:15,843 DEBUG [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager Remote Manager Host Lookup URL is null
2010-04-13 13:42:15,843 DEBUG [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager Remote Manager service name is null
2010-04-13 13:42:15,843 INFO [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager Remote Manager full URL is null/null
2010-04-13 13:42:15,843 ERROR [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager encounter some problems: non-JRMP server at remote endpoint
java.rmi.ConnectIOException: non-JRMP server at remote endpoint
 at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:230)
 at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
 at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
 at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
 at java.rmi.Naming.lookup(Naming.java:84)
 at com.thortech.xl.remotemanager.RemoteManagerSupport.getRemoteManager(Unknown Source)
 at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.EXECUTEREMOTESCRIPT(adpADCSEXECUTEREMOTESCRIPT.java:649)
 at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.implementation(adpADCSEXECUTEREMOTESCRIPT.java:148)
 at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
 at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
 at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
 at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
 at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
 at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
 at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
 at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
 at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
 at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
 at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
 at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
 at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
 at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
 at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
 at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
 at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
 at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
 at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
 at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
 at org.jboss.ejb.Container.invoke(Container.java:960)
 at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
 at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
 at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
 at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
 at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
 at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
 at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
 at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
 at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
 at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
 at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
 at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
 at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
 at $Proxy758.setProcessFormData(Unknown Source)
 at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
 at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
 at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
 at $Proxy801.setProcessFormData(Unknown Source)
 at com.thortech.xl.webclient.actions.UserDefinedFormAction.editForm(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
 at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
 at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
 at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
 at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
 at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
 at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
 at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
 at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
 at java.lang.Thread.run(Thread.java:619)
*3)* I confirmed that RemoteManager is running by going to the design console. Administration -> Remote Manager. And I see that RManager service has both Running and IT Resource to be selected.
But, when I shutdown remote manager and look at the Remote Manager from design console it only has the IT Resource to be selected.
So, I am assuming the OIM is seeing the RManager service to be active when it is running,
Please let me know if you have any ideas of how I should go about resolving this issue.
Thanks,
Rohit P

that�??s the output of the FIMADMIN. Can you exec that script for the user account you are having problems with?
Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)
Jorge de Almeida Pinto | MVP Identity & Access - Directory Services
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always evaluate/test yourself before using/implementing this!
* DISCLAIMER: http://jorgequestforknowledge.wordpress.com/disclaimer/
################# Jorge's Quest For Knowledge ###############
###### BLOG URL: http://JorgeQuestForKnowledge.wordpress.com/ #####
#### RSS Feed URL: http://jorgequestforknowledge.wordpress.com/feed/ ####
-------------------------------------------------------------------------------------------------------<>
"Raveendra Raju" wrote in message news:[email protected]...
Hi,
I have enable the
attributes �??Domain�?�, �??AccountName�?� and �??ObjectSID�?� and values are populated about that AD user account synched by the FIM Sync Engine".
Please find the below attributes values
Account Name: fimadmin
Domain Name : TESTNET
Object SID : AQUAAAAAAAUVAAAAeZI7Xt/AsWwbRQVrlAQAAA==
I have already validated the following:
·Grant Authenticated Users access to the FIM Portal
Site (must be checked if you want to allow access to the FIM Portal)
·Grant Authenticated Users access to the FIM Password
Reset Site (must be checked if you want to allow access to the FIM Password Portal)
I have also run the PowerShell script to validate these settings:
·�?�General: Users can read non-administrative configuration
resources�?�
·�??User management: Users can read attributes of
their own�?�
BUT STILL NOT ABLE TO LOGIN AS A REGULAR USER ... PLEASE HELP ME OR SUGGEST ME HOW TO DEBUG TO IDENTIFY THE ISSUE. IF SOME ONE GIVE
ME THE STEPS THAT WOULD BE GREAT HELP.
Jorge de Almeida Pinto [MVP-DS] | Principal Consultant | BLOG: http://jorgequestforknowledge.wordpress.com/

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Update processes are occupied fully by one user ID

Dears,
The update processes are occupied fully in two SAP Instances by one user ID, this happened for the second time due to the same user and same transaction,
it caused some IDOC generated very very slowly,
actually there are still some free update processes in the other two instances, but why IDOC processing update cannot assign to the free update processes?
Thanks,
Michael

Hi Divyanshu,
There is no any deadlocks in this system when issue happened.
only two dialog instance's update were all occupied by the same user and same transaction.
Users replied he just do the same operation as normal.
Abaper also analized the trace log and think it's normal.
But now almost everyday some user's transaction will occupied many update work processes,
then it will cause other user's update request always waitting in the system, it impacted seriously for other update business, the system's running speed is also normal when one user's transaction occupied many update work processes and running about 1 hours.
So what any other logs can we checked for this issue ?
Thanks,
Michael

Expre Document "update was terminated" received from author "XYZ user".

Hi Friends,
Our functional perople have created an output type and configured to the transaction VA02 transaction.
and Now they ,in VA02 transaction, clicking on the button Clicking on 'Document Header details' button they are chaning the purchase order type in Order data tab .
and in menu they are selecting Extras->output->Edit,now they are taken to Messages screen.
there they click on further data button,and change the Dispatch time 4 Send immediately( When saving the application ).
they come back and save.
In VA02 transaction when they are opening the same document ,I am getting Termination pop saying,
Expre Document "update was terminated" received from author "XYZ user". when I enter in The changes Which I made to Purchase order type are nto saved.
please let me know, what could be reason for getting the error.
Do the functional people need to make any configurations?
Please help me.
Regards,
Xavier.P

Hi Micky,
When I checked with Functionl people, they say that the output is not getting Created for the Dispatch time 4 Send immediately( When saving the application ). When I select the 3 send with application own transaction,I am not getting the termination popup and even the data is getting saved becouse it does not create output.
Regards,
Xavier.P

Updating to MAXDB 7.5.00.29- user logon failed error! Urgent Help

Similar Messages

Maybe you are looking for