Vmi (vendor managed)- subcontracting problem VMI_PO_CREATE_FROM_ORDRSP_VMI
Hi can anybody help me to find a solution for my Problem with VMI_PO_CREATE_FROM_ORDRSP_VMI ?
I need to create an order with ORDERS05 - Ordrsp idoc,
but we recognized that it is only supported in the way to create positiontype 0 Normal order or positiontype 2 consignation...
for my process it is necessary to create it with positiontype 3 subcontracting ...
i tried to implement it like with consignation, but it seems as if the problem appears in BAPI_PO_CREATE.
Has anybody an idea ??#
Thanks for your help
Hi,
For those who will have the same problem related to passing the subcontract fields
The solution is to fill the table EXTENSIONIN : example :
STRUCTURE VALUEPART1 VALUEPART2
SERRU 1 00010
DISUB_SOBKZ "Q" 00010
DISUB_PSPNR "00000289" 00010
If it is not working try :
TYPES: BEGIN OF lty_ebelp,
ebelp TYPE ebelp,
END OF lty_ebelp.
TYPES BEGIN OF lty_adsub.
include TYPE lty_ebelp.
include TYPE disub_mepoitem_data.
TYPES END OF lty_adsub.
TYPES BEGIN OF lty_adsubx.
include TYPE lty_ebelp.
include TYPE disub_mepoitem_datax.
TYPES END OF lty_adsubx.
DATA: ls_extensionin TYPE bapiparex,
lt_extensionin TYPE STANDARD TABLE OF bapiparex,
ls_adsub TYPE lty_adsub,
ls_adsubx TYPE lty_adsubx.
ls_adsub-ebelp = '00010'.
ls_adsub-serru = '1'.
ls_adsub-disub_sobkz = 'B'.
ls_adsub-disub_pspnr = '00000289'.
MOVE ls_adsub TO ls_extensionin-valuepart1.
ls_extensionin-structure = cl_adsub_constants=>extin_po_struc.
APPEND ls_extensionin TO lt_extensionin.
ls_adsubx-ebelp = '00010'.
ls_adsubx-serru = 'X'.
ls_adsubx-disub_sobkz = 'X'.
ls_adsubx-disub_pspnr = 'X'.
MOVE ls_adsubx TO ls_extensionin-valuepart1.
ls_extensionin-structure = cl_adsub_constants=>extin_po_strucx.
APPEND ls_extensionin TO lt_extensionin.
So data structure LT_EXTENSIONIN will be used when calling BAPI_PO_CREATE1.
Note : The solution is explained in the SAP Note 1566153.
Similar Messages
-
Hi all~
I'm beginner in SNC.
SNC have SMI scenario. But I think SNC-SMI is same as MM-VMI scenario.
SMI
======================================================
http://www50.sap.com/businessmaps/1D59B26B277611D5B359000102ACA9A3.htm
The SMI process is a supplier-driven replenishment and planning process, which is based on min/max stock balance levels, on current demand, in-transits and planned shipments.
======================================================
VMI
======================================================
[http://www50.sap.com/businessmaps/459B5C21A96411D3870B0000E820132C.htm|http://www50.sap.com/businessmaps/459B5C21A96411D3870B0000E820132C.htm]
With vendor managed inventory scenarios, manufacturers can offer their customers a value added service by performing the replenishment planning task for their business partners.
======================================================
Anyone can help to verify differ or same?
Thank you.
SKY.Hello ,
To add to above two answers,in SNC supply chain is as follows.
SUPPLIER -
> MANUFACTURE -
> CUSTOMER
SNC as an aplication will be installed at Manufatcurer site.
Now if Supplier is managing inventory for manufacturer than it is SMI.In this case supplier will login into SNC ( hosted at Manufatcuring site ) and manage inventory.
If Manufacturer is managing inventory for CUSTOMER than it is VMI.
Basically SMI and VMI are mirror image of each other.
Hope it will help.
Regadrs
Rahul -
VMI - Vendor Managed Inventory on Vendor side
Hi SD gurus,
I am new to VMI ,I want to implement the functionality of VMI on vendor side.
Can anyone please let me know the related documents or links for the implementation. It will be highly appreciated if there are any other documents you can suggest.
Wating for reply .
Thanks in advance.
Sagar.Hi Damu,
Thanks for the link.
But I am not looking for SNC , I am purely looking for VMI on supplier side i.e Supplier managed Inventory.
Can any one give me the links to the step by step documentation for implementing VMI on supplier side i.e Supplier managed Inventory.
Regards
Sagar -
(VMI) Vendor Managed Inventory
Dear Gurus,
I'm new to MM. I need your expertise to enlighten me on the VMI process. We have a Supplier and we would like to implement VMI so that the materials are only created with PO and Invoiced at the time the materials are used for Production Consumption.
How do I set this up? What are the prerequisites?
Thanks experts!Hi,
This can be mapped as vendor cosignment. Vendor places stock at your premices. You will do GR for the material, but no accounting docs get created. When the consumption of that material is done through GI or transfer posting from consignment to own throgh 411 K movemet type. The accounting will get trigger. In mrko we will do settle. One thing is there is no invoice. Only settlement periodically in MRKO.
The prerequisites are Material master vendor master PIR )infocategory as consignment, price should maintain), consignment PO(here price will be picked from PIR, NO invoice Tab, item category K), GR and MRKO. For each movemet type special stock indicator as K should be used.Thanking you.
Edited by: Padmasri Garapati on Sep 30, 2011 11:44 AM -
Vendor Managed Inventory(VMI)
Hi All,
Greetings!
Can any body send me Vendor Managed Inventory (VMI)-customization docs
and process flow
Thanks in Advance
Regards:
[email protected]Hi
Please Check this link
http://www50.sap.com/businessmaps/459B5C21A96411D3870B0000E820132C.htm for the Business Process
help.sap.com/saphelp_nw04/helpdata/en/86/37e619f09b11d18ca1080009d10d9a/content.htm - 7k - Please check this link for configuration
THANKS
Jeevan -
Vendor Management / Tracking the Product or Material
Hi Friends:
Is it possible to follow up on Vendor Management. the case study is as under :
In an organization, the customer has a problem with the product, & the organization offers Customer Service ( which may be mapped in CS Module), in-house repair & on site repair.
There is a case wherein the engineer from the service provider side ( organization) is not able to solve the problem & due to technical or lack of spare part or any other reason, the product / or its part is sent back to VENDOR either fo the Replacement or REPAIR of the product, and the customer does not know where is the product or its part is neither the service engineer s know, And when customer makes a call to enquire about his product, no one in the company has the answer asto where the product is either with the service provider or at the VENDOR site.
So, in order to track the product immediately... where can the same be tracked & which Module of ERP (R/3)? CS Module, MM Module or any other Module ?
Kindly Suggest & advice.
Regards, PradeepHi,
As per your scenario, try these following steps:
1. Create the Service Notification
2. Create the Service Order based on notification
3. Based on analysis, either operation can be done internally (PM01 Control Key) or externally (PM02 Control Key)
4. PR would be generated for the External Operation
5. Components may be issued based on that order for the External Operation
So based on that document flow in notification, you can track the status of the service notification. Even you can define the tasks to be done for the service in the notification, so that, you can track that notification very well.
Regards,
Maheswaran. -
Hi All,
Can any body help me by giving some useful links regarding Vendor Managed Inventory (VMI), from where can i get Best practice document related to VMI.
regds,
CBHello,
Following SAP help link may help you;
http://help.sap.com/bp_blv1600/V5600/BBLibrary/HTML/139_EN_IN.htm
http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/content.htm
http://help.sap.com/saphelp_scm70/helpdata/en/5c/3f9df8bbc34413809579fc5d18414e/content.htm
BR,
Tushar -
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.Hello Satya/All,
I'm also experiencing the exact problem you are facing. It would be great if
somebody could help in this regard at the earliest.
Thanks, senthil
Satya Ghattu <[email protected]> wrote:
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted
CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create
an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due
to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer. -
Hi All
Can some send me a process flow diagram on Vendor Managed Consignment.
Please include the following together with notes
1. Goods Issue against a reservation
2. checking of Consignment stock balances
3. Back Order creation
4. consignment physical inventory
VishnuHi vishnu,
Pl. find the link for PDF file http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIM/MMIM_ST.pdf
http://sap-img.com/sap-sd/consignment-sales-process-in-sap.htm
http://www.easymarketplace.de/online-pdfs.php
Regards
hareesha -
Vendor Management with Service Industry
Hello!!
I was wondering if you guys could tell me what SAP material types do your companies use for materials/services like warranties, software install, insert (product information/usage instructions/promotion printed, folded and inserted into the package with the product). I'm assuming that any labor costs, travel, etc. related to repair are DIEN. Do you use any other SAP material types for repairs?
I'm trying to figure out what would be the most suitable material types for above items.
Also How's the VEndor management comes in into the Service industry like IT Services.
Thanks in Advance!!!
Rajesh.MHi Rajesh,
As such for services, material type is DIEN, or may be without material number, but using the material groups...but for usage instrcutions/promotion material, material type will be NLAG or UNBW (Non-stock and Non-Valuated respectively).
BR,
Krishna -
ROS - SRM Vs, Vendor management -E-Sourcing
Hi all
How vendors are screened in e-Souricng in Vendor management arena. I learnt that e-sourcing too accept and manage vendors .
Supplier screening is very important in procurement busisness.
Is it like Registration of suppliers (ROS) in SRM?
Are after created a vendor in e-sourcing , will u push to ECC or SRM. How vendor data are sync with Backend systems like ECC /SRM.
really vendor data relate with accouting data will be stored in ECC. what about in e-sourcing.
since customer expect this functionality. ARe in e-sourcing can used for only Vendor management for large scale customers. for eg tomorrow DUN And BRADSHEET wanted to use Vendor management functionality via e-Sourcing. is it possible.
Any help is apprecited. I am Mostly interested How vendors are selected / what are the main factors are considered to accept a vendor .
Thanks
MuthuHi Muthu
Check out this note
1313088 Integration of SAP E-Sourcing 5.0/5.1 and SAP ERP
on page 2 and 3
Replication of SAP E-Sourcing Supplier to SAP ERP Vendor
This scenario supports the replication of suppliers that have been created in SAP E-Sourcing
for a sourcing event. Suppliers can be replicated back to SAP ERP individually on an asneeded
basis with user intervention.
When transmitting supplier master data from SAP E-Sourcing to SAP ERP, only external
number assignment is supported. This means that SAP E-Sourcing determines the supplier
number that is assigned to the vendor when it is created in SAP ERP. This is possible via SAP
E-Sourcing configuration mechanisms.
Internal number assignment in SAP ERP is not supported in the current integration package.
This means that SAP E-Sourcing does not allow a supplier to be published to SAP ERP when
internal number assignment is used. An error message is displayed in this case.
Linking is possible only through a manual process (that is, you must create the vendor in SAP
ERP manually and then link it to the SAP E-Sourcing supplier manually).
Supplier changes cannot be replicated from SAP E-Sourcing back to SAP ERP. Only the initial
creation of the supplier is supported.
The following basic SAP ERP vendor fields are supported:
SAP E-Sourcing Supplier Fields SAP ERP Vendor Fields......
cheers
alex -
Problem in issuing RM's in spcl stock to vendor in subcontracting scenario
Hi all,
Scenario:
I am working with Make to order scenario. In this scenario, the client is sending 2 raw materials to the vendor and the vendor is adding 2 more raw materials and assembles all the RM's to manufacture semi finished product. After that, our client will do GR for that semi finished and use that SFG for finished goods production. I will run MRP against sales order in MD50 so that all the raw materials procured will come under special stock.
Issue:
Now my problem is i am not able to issue the raw materials under special stock to the vendor. Is there anything to do from PP point of view to solve it.
Please let me know in case of any clarifications.
Regards,
Krishna ChandraHello,
You can use operation subcontracting.
Please find the the link below to see operation subcontracting in detail:
http://www.sap-img.com/production/two-types-of-subcontracting-relevant-for-pp.htm
Regards,
Alok Tiwari -
Subcontracted Stock at Vendor has quality problem - must be blocked
We have stock at a Vendor (Special Stock Type O) that has a possible quality problem. It must be put on hold until we determine the extent of the problem.
It is still showing up in MD04 as available stock. I tried to move it to QI with movement 322 but it still shows up as available.
How can I block that stock from consideration by MD04 without physically removing it from the Vendor?
Thanks in advance.
Best regards to all!Hi ppkk,
Thanks for your thoughts.
The problem is that this stock is at the vendor, so there is no storage location. We have Quality related Storage Locations for stock in the plant, and if we move parts to those storage locations they do not show up as available stock in MD04.
But the Special Stock type O is just "Stock at Vendor" with no Storage Location.
I think that we would have to receive the stock back into our plant in order to move it to a Quality related Storage Location.
Does that make sense?
Thanks again. -
Vendor Management Inventory (VMI)
Hi All,
What is the Components of SCM 5.0? SCM Planning,SCM EXe,SCM Collaboration and SCM Co-ordination(EM,PM)
is right?
SCM is separate server or is it integrated with BI 7.O?
Please explain and if possible please post some links.
Thanks
KNHi,
The SAP help website would provide you adequate information. The licensing cost would vary depending on the components you would need from the mySAP Business suite, which comprises of all the modules you have listed beneath. BI 7.0 can be integrated to SCM 5.0 and can be hosted on the same server depening on the grunt of the box being used.
refer help.sap.com
Regards
Vinod -
The problem about integrate Portal and R/3 : vendor query report problem
Hi everyone :
We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors, because the cost is too much .
And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
I think this is a general problem when integrate Portal and R/3, BW .
Is there somebody had solved this problem or give any advice?
Any discuss is welcome.
Best Regards,
Jianguo ChenHi,
I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
Hth,
Michael
Maybe you are looking for
-
My Macbook Pro 13' is brand new however, it does not serve me well compared to my old compaq laptop. It is so annoying and disppointing. I am also a new user of Mac than Windows. There's something going on especially when I am to start up my Mac, it
-
How to Categorize G/L Accounts report wise
Hi All, I have a requirement on G/L accounts functionality. Where we have lot of G/L accounts in ODS level and need to categorize them report wise. Say suppose i have a report called Cost to quality for which only a bunch of G/L accounts are to be co
-
Yahoo webmail won't open (us523.mail message)
Hope someone can help. I can log on to my Yahoo account but when I try to access my email, I get a message- Safari can't open the page "http://us.f523.mail.yahoo.com/ym/login?.rand=95gdup33sm8b5" because it could not connect to the server "us.f523.ma
-
Cannot start iChat Server on OSX 10.4.3 without SSL certitficate
I've installed an OSX server 10.4.3 on a private network, without DNS. All services are running correctly just needing a direct addressing. I'm trynig to run iChat server but it stop and seems to need a SSL certificate. This is the error message : "J
-
Adobe Presenter - AICC No Completion in Saba
I am currently testing integration with Adobe Presenter courses using the Saba LMS and AICC import. The training content is on a different domain than LMS so I have used the frameset and crossdomain.xml workarounds suggested in another Adobe forum p