Vmware Esxi5.1 virtual machine network adapters problem

I have an issue with a windows 2008 R2 virtual machine on an ESXi 5.1 free version server , network adapters inside the VM is not identified , they appear with exclamation mark and when I tried to reinstall drivers for intel e1000 adapter it keeps telling me that no adapters are present , in addition to that it doesn't identify vmxnet2 and vmxnet3 even I tried to uninstall and reinstall vmware tools!
Anyone can help with this issue !?
Thanks

I want to use the VM as a DHCP server or share the VM's internet connection with OS X -- the Mac will masquerade as a virtual Linux box, not vice-versa. So I must establish a network through the VM. The blog post "Setting up an IPv6 Test Environment under Mac OS X using VMware Fusion" [http://blogs.sun.com/richlewis469/entry/settingup_an_ipv6test] and the MacPort aiccu [http://www.sixxs.net/tools/aiccu> appear to be relevant ...

Similar Messages

Networking arch linux virtual machine networking

For a project, I've got an arch linux virtual machine running on the school network. The image has SSH installed and that works just fine, the problem is that the network admin didn't give it access to the internet (so I can access it only over lan). What I would like to do is run updates on it and install several libraries that I need for deploying a web application (rails). The easy way to install them is obviously through pacman, which leads me to my question: Is there a way to make a network interface on the server that would use ssh to make a bridged connection to the internet?
Not super sure if I worded that correctly, but it seems that it ought to be possible to have a network interface on the vm that, when the vm opens an ssh connection to some ssh server (on the lan) allows the vm to use that connection for more than just ssh.
Thanks.

I was making this too complicated... I set up a squid proxy on a different machine and it all works well.

Virtual Machine Network Health not working

Server 2012 R2 is supposed to have a feature which detects when the public LAN connection used to get into the VM's becomes unavailable, this is supposed to kick in around 60 seconds after it being unavailable. however, I have tried to test this by physically
unplugging the network cable, and disabling the network adapter in ncpa.cpl and the virtual machine doesn't seem to live migrate to the other node. the settings for the network adapter in the virtual machine configuration has the "protected network"
box checked by default. is there something else we need to check/configure here?
it looks like it tries to migrate but fails, the message in the information details state:
Live migration of 'Virtual Machine Test-TERM' failed.
'Virtual Machine Test-TERM' failed to fixup network settings. Verify VM settings and update them as necessary
thanks
Steve

Hi,
The cluster failured and the live migration often trigerd by the heart beat communcation crash.
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Set VLAN ID on a virtual machine network on Windows 2012

I'm currently working in C# consuming Hyper-V V2 WMI API to do different tasks related to virtual machines. I've not been able to figure out how to get/set VLAN ID. I've found many links on net pointing to PS HyperV lib exploring "Get-VMNICVLAN"
and "Set-VMNICVLAN" but they dont seem to be working from me as Nic.connection[0] always seem to be null in my case. Perhaps that only works with Windows 2008 Hyper-V.
Also I'm not familiar with WMI scripts much so converting that code to C# is being a pain. Can someone please tell me exactly how to do so in C# using WMI.
Regards
Usman

Hello Brian
Thanks for your reply. Perhaps V1 and V2 are not only namespaces since there are many class names, method names, parameter names are different, or perhaps I didnt work with the standard way with V1. Like "msvm_VirtualSwitch" changed to "msvm_VirtualEthernetSwitch",
"msvm_VirtualSystemGlobalSettingData" to "msvm_VirtualSystemSettingData" and specific for VLAN "Msvm_VLANEndpointSettingData" to "MSVM_EthernetSwitchPortVLanSettingData" and many more places.
I would easily set VLANID using code below in V1
string szArg = szArg = "NetworkVSP:" + szSwitch + @"\\" + szSwitchPort;
ManagementObject vlansettingdata = this.wmi.GetWmiObject("Msvm_VLANEndpointSettingData", "InstanceID Like 'Microsoft:{0}%'", new object[] { szArg });
vlansettingdata.SetPropertyValue("AccessVLAN", nVlanid);
vlansettingdata.Put();
But now even having reached the vlansettingdata object in V2, I get a "Generic Error" on calling vlansettingdata.Put(); Here's a snippet of code I'm using in V2, which may be wrong
ManagementObjectCollection vlansSettings = switchPortObj.GetRelated("MSVM_EthernetSwitchPortVLanSettingData");
ManagementObject vlanSettingsData = null;
if (vlansSettings != null)
foreach (ManagementObject settingData in vlansSettings)
if (settingData != null)
vlanSettingsData = settingData;
break;
if (vlanSettingsData != null)
vlanSettingsData.SetPropertyValue("OperationMode", "1");
vlanSettingsData.SetPropertyValue("AccessVLANID", nVlanid);
vlanSettingsData.Put();
IsVlanSet = true;
Forgive my ultimately dirty raw code, its just part of a test app that's getting uglier with desperate attempts to succeed.
Regards
Usman

Oracle VM as virtual machine - Networking

hi
I have seen some docs about networking, and thus how to install oracle vm 3.2.x as virtual guest on top of the cloud stack (HA enabled).
Is there any best practices document for networking in this fashion?
We like to have 3 networks.
Network management VLAN1 (local IP adresses)
Storage Network VLAN2 (local IP adresses)
VM Network VLAN3 (public IP's)
While the oracle vm runs as a guest, there is only the public network wehere we can select for nic's.
It's possible to run OVM as guest with diffrent network segment? Should we use this configuration in a production ervironment
Thanks for your support

I was making this too complicated... I set up a squid proxy on a different machine and it all works well.

Time Machine network connection problems. Scary.

I have several problems with the Time Machine backup system. I do not know if they are based on the same basic problem or if these are different problems. Therefor I will describe the whole complex here:
I have a setup with 2 computers, a Mac Pro and a Laptop Pro, and 2 different backup discs (2TB Lacie backup disc), all of this connected to the router with ethernet except the laptop which goes with wifi. The plan was to have one disc to back up each computer.
Initially I got the setup to work. But after a while, both computers says that there is a problem finding its backup disc. This happens without any changes in setup, passwords or physical connections. Sometimes I am able to connect to the backup disc by typing in the ip address or otherwise, and sometimes that doesn't work either. When I finally (sometimes) get contact between machine and its backup disc, the Time Machine panel shows "no previous backup". Pretty scaring. All my work is on those discs (should be).
Another problem is, for the Mac Pro machine, that it sometimes says "not enough free space on disc for backup". At the same time, Time Machine is set up to delete older backup versions as soon as it is needed. How does that fit together?
Today I bought a new and expensive router (Netgear 600), just in case it was something wrong with the old one. But I still have the same problems.
Any enlightening on this situation is very much appreciated!
Thanks

Hi all,
To fix the Time Capsule network backup error, I removed the 5GHZ band from my AEB network.
After that it backed everything up all fine.

Problem in ACS 5.2 on Virtual Machine

Hi Everyone !
I have a problem with the interface on the ACS 5.2 , The inferface work fine but going down unexpectedly and only if I make (for example) a ping to the default gateway it come back.
Please somebody can help me ??
Regards.
Rodrigo

We say that it's not tested by cisco, You will be able to install ESX 4.1 just fine but there might be some issues with services/processes . In that case TAC won't support those issues. Vsphere is a Vmware managment tool. ACs 5.x doesn't support/run on vspehere. ACS 5.3 should officially support ESX 4.1
Virtual Machine Requirements
The minimum system requirements for the virtual machine must be similar to the CSACS-1120 Series appliance hardware configuration.
Table 6-1 lists the minimum system requirements to install ACS 5.2 on a VMware virtual machine.
Table 6-1 Minimum System Requirements
Requirement Type Minimum Requirements
CPU
Intel Core2; 2.13 GHz
Memory
4 GB RAM
Hard Disks
500 GB of disk storage
NIC
1 GB NIC interface
Hypervisor
VMware ESX 3.5 or 4.0
Note You can use VMware Server 2.x only for an evaluation version of ACS 5.2. For an evaluation version, the disk space must be between 60 GB and 500 GB. Evaluating ACS 5.2
For evaluation, ACS 5.2 can be installed in a VMware Server 2.x virtual machine or a VMware ESX virtual machine. When evaluating ACS 5.2, you can configure less disk space in the virtual machine, but a minimum disk space of 60 GB is required.
Rgds, Jatin
Do rate helpful posts~

[vmware] Virtual machine communication interface failed

hello,
on a fresh install of archlinux, i have installed vmware workstation 11.0 but when i execute this command :
vmware-modconfig --console --install-all
i have this error
Virtual machine communication interface failed
full log
vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/cpuid.o
/tmp/modconfig-sc9HDC/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/task.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/hub.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/userif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/netif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/bridge.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/procfs.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
[root@hulk vmware-root]# ls
vmware-818.log vmware-authdlauncher-2058.log vmware-vmis-1888.log
vmware-apploader-1976.log vmware-vmis-1407.log vmware-vmis-1910.log
vmware-apploader-818.log vmware-vmis-1429.log
[root@hulk vmware-root]# chown gael:users *
[root@hulk vmware-root]# chown -R gael:users ./
[root@hulk vmware-root]# modprobe vmci
modprobe: FATAL: Module vmci not found.
[root@hulk vmware-root]# vmware-modconfig --console --install-all -v
/usr/lib/vmware/bin/vmware-modconfig-console: invalid option -- 'v'
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/cpuid.o
/tmp/modconfig-KdpHql/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmnet-only/driver.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/hub.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/userif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/netif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
thanks for your help

Also having the same problem
dustin ~ $ sudo vmware-modconfig --console --install-all
[sudo] password for dustin:
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-KZzuso/vmmon-only/linux/driver.c:1332:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
make: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmnet-only/driver.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/hub.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/userif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/netif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetEvent.o
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:43:
include/linux/pci_ids.h:2248:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:42:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetUserListener.o
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:52:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:51:
include/linux/pci_ids.h:2248:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
Now I have the same failed communication interface also
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
PS, I have the vmware-patch 11.0.0-1 installed

HT3231 Migration Assistant and vmware virtual machine

I would like to use Migration Assistant to move my information from a MacBook Pro to a new MacBook Air. Before I perform that, I would like to make sure I don't migrate any problems in the new machine.
How do I choose for example NOT to migrate the VMWARE virtual machine in my older MacBook Pro so that the new MacBook Air becomes lighter?
Thanks

During the setup of your MacBook, it will ask you to restore a backup, so choose the option to restore data from another Mac and follow its steps. You will be able to choose what you want to restore.
If you haven't modified anything, VMware stores virtual machines in Documents folder, so the only thing you have to do is to untick the Downloads folder and the virtual machine won't be migrated to the MacBook Air. See > http://pondini.org/OSX/SetupLion.html
If you are going to migrate applications, it's important to check that they are compatible with Mountain Lion. PowerPC applications aren't compatible and you will be wasting space if you transfer these apps

Error while installing XI on virtual machine

Hi All,
My Scenario: I am installing SAP XI on Windows 2K3 server with Ms SQL as DB and Java 1.4.2_12.
                       I am doing this installation on a VMware virtual machine.
My Problem:   I am facing these error:
ERROR 2007-12-18 20:07:54
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-12-18 20:07:54
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost|ind|ind|ind|ind|3|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|11|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Log File content
import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 17, completed 0, failed 0, total 18.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 17, completed 0, failed 1, total 18.
importmonitor.log_
INFO: 2007-12-18 20:06:24
Import Monitor is started.
CONFIG: 2007-12-18 20:06:24
Application options:
dbCodepage=4103
dbType=MSS
extFiles=no
impJobNum=3
importDirs=C:\NW2004s_Dump\51031504\EXP1;C:\NW2004s_Dump\51031504\EXP2;C:\NW2004s_Dump\51031504\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\MSS\CENTRAL\AS
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=size
r3loadExe=E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-12-18 20:06:24
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-12-18 20:06:24
List of packages with views: 'SAPVIEW'.
INFO: 2007-12-18 20:06:24
Data codepage 1100 is determined using TOC file 'C:\NW2004s_Dump\51031504\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2007-12-18 20:06:27
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'C:\NW2004s_Dump\51031504\EXP3\DATA\SAPSDIC.STR' for package 'SAPSDIC'.
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\NW2004s_Dump\51031504\EXP3\DATA\SAPSDIC.STR DDLMSS.TPL SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-12-18 20:07:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with exception.
com.sap.inst.lib.io.ProcessExitException: Process 'E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast' exited with return code -1073741819
*     at com.sap.inst.migmon.LoadTask.loadPackage(LoadTask.java:534)*
*     at com.sap.inst.migmon.LoadTask.processPackage(LoadTask.java:257)*
*     at com.sap.inst.migmon.LoadTask.run(LoadTask.java:176)*
*     at java.lang.Thread.run(Thread.java:534)*
*     at com.sap.inst.lib.util.ThreadDispatcher$ThreadWrapper.run(ThreadDispatcher.java:113)*WARNING: 2007-12-18 20:07:54
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-12-18 20:07:54
18 error(s) during processing of packages.
INFO: 2007-12-18 20:07:54
Import Monitor is stopped.
I also checked the SAPSDIC.tsk file.
Task entry for only one task had errors:
D TADIR I err.
I also read note 455195 but did not get much help to solve this issue.
Please help me!!
Regards,
Sumit

Did you actually run the installer (Setup.exe) after downloading?

Virtual Machine with Adobe Pro 8 Unable to activate.

I had a physical machine with windows 2K3 and Adobe Pro 8. We ported the physical machine to a virtual machine and now Adobe Pro 8 says it needs to activate again. We tried to activate through the web and over the phone, but we are currently out of activations. The person on the phone says that Adobe Pro or ANY of their products for that matter will NOT work on a virtual machine!!! How ridiculous is that? With many companies going green and going virtual I can not believe Adobe doesn't support virtual machines. I was told to search the web and forums. I have yet to find an answer. So I've decided to post this if anyone has run in to the same problem and if there are any solutions.

Victor,
Acrobat most certainly does work on a Virtual Machine (VMware and MS Virtual Server VMs are supported) - I sincerely apologize that you were given incorrect information. We do a large majority of testing and support on VMware-based virtual machines and any issues you have with running Acrobat 8 on a virtual machine should be considered supported.
Acrobat's licensing will require you to re-activate when you change hardware (which, in effect, is what cloning a physical machine to a VM entails - the virtual hardware supplied by the VM will have a different signature than your physical hardware did). This is why you are being prompted to reactive - it has nothing to do with the VM specifically, the same thing would happen if you ghosted your system onto new physical hardware as well.
If you can post a way for me to contact you, I will get you directly in touch with the people who can override an activation for you. That way you will be able to use Acrobat on your virtual machine.
Again, I apologize for you being given incorrect information. The situation is being looked into and new information will be updated to our help desk agents to make sure they are aware of this - thank you for pointing out this oversight.

Unable to open display localhost:0.0 in VMware RedHat linux machine

I have been trying to Install Oracle 10g RAC in VMware linux virtual machine.
my virtual machines are running properly and I am able to use RSH & SSH.
when I run runInstaller it is not comming up due to DISPLAY environmental variable setup.
I have set the varable as follows
DISPLAY=localhost:0.0; export DISPLAY
then if i execute xhost + it gives the following error
"xhost: unable to open display localhost:0.0"
I have tried with ipaddress instead of localhost. Eventhen it is giving the same error
What is the problem? How I can solve the issue?

i had the same issue. running the xhost + as root fixed the issue, but only after i switched to root using 'su -' instead of just 'su' (likely something in the profile scripts that get run when you use the '-' (dash) versus just using 'su'.
after running the xhost +, i was able to (as oracle) do:
export DISPLAY=:0.0
./runInstaller
And good to go.

Connection to Office Virtual Machine through IE keep dropping

Hello there,
I hope I posting the question to correct topic/group, if not please suggest the correct topic.
I am using windows 8.1 ( Not Pro) to connect to my office Virtual machine. The connection procedure as follows.
Open a browser type an URL, which asks for credentials
Enter your credentials including RSA key
For first time connection, a F5 plugin will be installed for browser [ IE only accepts the plugin if you make the website in compatibility enabled]
successful connection to office Virtual machine
Now the problem begins, the connection to VM keep dropping for every 50 seconds and automatically connects back after 50 seconds. It is bugging me for a while.
I had no problem using this feature from other WINDOWS 7 laptop.
PLEASE HELP and thanks in advance,

Hi,
This should be caused by compatible issue or security settings, since this plugin can only work in compatible mode.
Regarding current situation, please first let me know what program you use to create office VM, VMware or Hyper-v or others?
I suggest we try following steps to check the issue:
Step 1: Put this site in Trusted sites.
Step 2: Uncheck the Protected mode.
Step 3: If there is any third part security applications, please disable it or remove it for testing, since such program has IE protection which sometimes prevent you from connecting RDP console in IE.
Step 4: Please disable other add-ons in Manage add-ons to see what’s going on.
Step 5: Let’s use the lower document mode in F12 developer tool.
Post back the results and event log for further research.
Collect event log:
http://windows.microsoft.com/en-us/windows7/what-information-appears-in-event-logs-event-viewer
Kate Li
TechNet Community Support

Time Machine back up filling with Fusion 2.0.1 Boot Camp virtual machine

Hi all, I want to report and share something (don't actually know if it's a bug).
I finally solved an issue that was maddening me since weeks: my Leopard 10.5.6 Time Machine was backing up lots of gigabytes of data even if I wasn't writing to files that much lately. I tried to exclude everything I was aware of having a large size, and I even did not have a Fusion VM at all at a certain point in */Users/MyUser/Documents/Virtual Machines*. The only virtual machine I am using is the virtualized Bootcamp partition with Vista installed. But I didn't care about it because I was sure Time Machine wasn't going to backup it (i.e. I thought it was excluded by default being another partition!). Instead, I finally succeded in tracking down (with a free app called "Time Tracker", google for it) the culprit to a *Boot Camp partition.vmwarevm* file, several gigabytes large (actually large as much as the used space in the Boot Camp partition), that's found under
*/Users/MyUser/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0*
So I went in Time Machine options dialog and excluded */Users/MyUser/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp*.
Then the problem was solved...now I need only to mount the sparsebundle and erase all the old backups of that file to recover some more space in Time Capsule...
Hopefully this will be helpful to someone else!
Cheers!

AppleRyck wrote:
Hi all, I want to report and share something (don't actually know if it's a bug).
I finally solved an issue that was maddening me since weeks: my Leopard 10.5.6 Time Machine was backing up lots of gigabytes of data even if I wasn't writing to files that much lately. I tried to exclude everything I was aware of having a large size, and I even did not have a Fusion VM at all at a certain point in */Users/MyUser/Documents/Virtual Machines*. The only virtual machine I am using is the virtualized Bootcamp partition with Vista installed. But I didn't care about it because I was sure Time Machine wasn't going to backup it (i.e. I thought it was excluded by default being another partition!).
No, not a bug. By default TM will back-up any drive/partition it can read, except the TM backup drive/partition itself.

Cannot create Virtual Machine

Hi,
I'm very new to oracle VM, I'm testing the software in an Ultra 20 M2 and I'm using OVM 2.2.0
After installation, while creating a virtual machine, I recieved the following error message:
Check memory, mac address and networktype
Register virtual machine img
Register virtual machine geninfo
Register virtual machine networks
Register virtual machine disks
Create PVM
Failed. Result -failed:<Exception: failed:<Exception: ['virt-install', '--paravirt', '--name=10_SOLARIS10', '--ram=1024', '--vcpus=1', '--vnc', '--vnclisten=0.0.0.0', '--vncpasswd=/tmp/tmp1p6gfA', '--noautoconsole', '--location=nfs:ovmserver1:/var/ovs/mount/6FE8B12E5B884EABB80488E5350A56F6', '--keymap=fr', '--mac=00:16:3E:3C:C6:F2', '--bridge=xenbr0', '--file=/var/ovs/mount/6FE8B12E5B884EABB80488E5350A56F6/running_pool/10_SOLARIS10/System.img', '--file-size=10.0'] => mount: can't get address for ovmserver1
umount: /var/lib/xen/xennfs.Y3Fs7i: not mounted
ERROR: Unable to mount NFS location!
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMInstall.py", line 317, in xen_install_vm_para
run_cmd(args=cmdlist)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVMInstall.py", line 197, in install_vm_para
else: raise Exception(rs)
I understand that the system cannot mount my VM directory, I have tried several things but nothing is going through.
can somebody help?
Maury

If you are new, why not use the current version, 3.0.3? I am new too, and don't know anything about version 2 so I can't help with your direct question. 3.0.3 actually has ten patches against the host and 1 for the manager. I'd suggest you get current and start over.

Vmware Esxi5.1 virtual machine network adapters problem

Similar Messages

Maybe you are looking for