Voice chat in ut2k4 won't work [not solved yet]

I have already tried the following resources:
http://www.linux-gamers.net/modules/wfs … ticleid=34
http://www.thehaus.net/Tips/UT/ut2004icculusfaq.shtml
my ~/.openalrc:
Contains user settings for OpenAL
; Which backend? Tried in order of appearance.
;(define devices '(native alsa sdl esd arts null))
(define devices '(alsa sdl esd))
; Four speaker surround with ALSA.
(define speaker-num 2)
;(define alsa-out-device "surround40:0,0")
(define alsa-out-device "hw:0,0")
; For alsa-in support. Mainly for using voice chat.
(define alsa-in-device "hw:1,0")
;hw:1,0 because i use my second sound card to record on many programs (ie audacity) bc emu10k1 only records the sound out not mic.
; Some drivers do not support select.
;(define native-use-select ;t)
symptoms:
sound works great, clear and not laggy at all. i have all the voice chat keys  mapped and all the good voice chat options enabled. everytime i press a key that chats, either teamchat or public-chat the sound gets sort quiet (like it's supposed to, to avoid feedback). the problem is nobody hears me at all, not even a "turn up you volume dude!" or "what was that?!"
hardware
amd 3200 64-bit winchester
nvidia 6800 256
2gb ocz 2-3-2-5
250 gb sata hd linux drive
160 gb windows drive
water cooling #complete unecessary i know : )
audigy gamer # works with emu10k1 fine no recording though
chaintech zenith VE nforce 4 with 7 channel audio using  snd_intel8x0 module since nvsound only does oss

thanks for the previous replies!
┌──────────────────[AlsaMixer v1.0.9a (Press Escape to quit)]──────────────────┐
│ Card: Audigy 1 or 2 [Unknown] │
│ Chip: SB Audigy │
│ View: Playback [Capture] All │
│ Item: PCM │
│ │
│ │
│ │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒│ │▒▒│ │
│ │ │ │ │ │▒▒│ │ │ │▒▒│ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ │
│ 86<>86 90<>90 91<>91 88<>88 94<>94 88<>88 96<>96 96<>96 │
│ < PCM > Synth Line CD Mic IEC958 O Aux Analog M │
│ │
│ │
│ │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
this is what i see on "alsamixer -V capture" i turned on the mic capture and encreased it's volume. still the same syptoms persist in any recording app set to use the audigy gamer. no matter where i plug in the mic the app only records the outgoing sounds from the sound servers and apps but never the mic.
btw: on all distros my kmix has never had anything in the input tab, (no record sources) when you click mixer in the tray of kde.

Similar Messages

  • Ipod nano 2006 dial won't work/ not functioning

    the dial is not working/ not functioning. it plays on the ipod dock automatically but your won't be able to stop, play, pause or scroll down. what do i do?

    Replace the click wheel:
    http://www.ifixit.com
    http://www.iresq.com

  • [N8] Chat via GTalk won't work if Gtalk on the PC ...

    Hi!
    This is rather annoying. The Chat application that comes with the N8 works properly with a Google Talk account, but only if Google Talk application on my PC is not running.
    This issue is probably not due to Google because GTalk allows several clients to be active simultaneously with the same account, for example you can have GTalk running on your PC and your Android phone at the same time.
    Nokia Chat was OK with this in the previous version. The newest version broke something and now it refuses to connect if the client on the PC is active. If I exit it, suddenly I can log in on my N8.
    Is this a known bug? Any suggestions/solutions besides installing Numbuzz, Fring, eBuddy or whatnot - I don't want another client. I want the one that came with my phone to work.
    N8 / RM-596

    Hi ladextr,
    Thanks for using Apple Support Communities.  To sync your music to your iPad, first put your music in iTunes as described here:
    Adding music and other content to iTunes
    http://support.apple.com/kb/ht1473
    Adding content on your computer to iTunes
    iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
    Open iTunes
    From the File menu, choose one of the following choices:
    MacAdd to Library
    Windows
    Add File to Library
    Add Folder to Library
    Navigate to and select the file or folder that you want to add
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    Once that's done, you can sync the music to your iPad by following this article:
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Cheers,
    - Ari

  • Apple "Chat Now" Feature Won't Work in Safari

    Every-time I try the Chat Now feature on the Apple Store page, it says "TEXT/IMAGE FOR SYSTEM NOT AVAILABLE"
    Is there a way to make Safari work with this? I've tried using Firefox and still the same problem.
    Thanks,
    Mason

    I'm not sure if it is a problem. Some people on other forums say it works for them. Actually about a month ago it worked for me in Firefox.

  • Any ideas on why 4s brightness control won't work (not auto brightness)

    Within the past week or so my brightness control stopped working. Restored OS but that didn't fix it.  I suppose it is just broken but seems an unlikely failure when everthing else still works.
    I've read all the threads on the auto brightness issues and fixes, but this is not that. The brightness slider does nothing with or without auto control on and in a dark room or full daylight.
    Anything else I might try short of replace the phone?
    Not a huge issue except for the fact that the already short battery life is reduced by no longer being able to reduce the brightness.

    If this is just happening on your home wifi, you might want to try unplugging your router for 15 seconds, then pluggint it back in.  Then on your devices, go to Settings>General>Reset and tap Reset Network Settings.  Note: this will erase passwords for previously joined networks so you'll have to rejoin your wifi again.

  • Video Chat in iChat won't work after 10.4.8 update

    I use video chat all the time in iChat but after the 10.4.8 update everytime I try and start a chat or get invited to one a window pops up and says "There was a communication error. Do you want to send a report to apple?". Has this happened to anyone else? Does anyone know how to fix this?
    Thanks

    Have you repaired permissions since updating? I'd start there.

  • Hi Just "upgraded" on Firefox suggestion - now the program won't work "not supported on this architecture" Im on a PowerPC Mac OSX10.5.8. Now what? back to Safari?

    How do I get an *older* version of Firefox (5?)

    *Firefox 4 versions and later do not run on a PowerPC Mac.
    *Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/6.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    * http://code.google.com/p/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Almost been a month, problem not solved yet... My Concerns (My Usage not working correctly)

    Context:
    My boyfriend and I got the
    Verizon Wireless Verizon Jetpack™ 4G LTE Mobile Hotspot MiFi® 4510L Prepaid
    sometime around 4-7th of August.
    Prepaid Amount: 10 GBs for $90.
    Problem:
    The bytes under "My Usage" isn't uploading correctly. Ever since the day we got it, it shows to us 10/10 GB used. We hoped it would clear in time so we waited...
    Context continued:
    17 Aug 2012
    I noticed the problem hasn't cleared up so I decided to search around for Verizon's callback number online.
    I used the (800) 922-0204 phoneline for their customer service.
    I pressed 1 to access their "technicians".
    1st Technician Guy: 17 Aug 2012 (Fri)
    He tried to have me disconnect my account then reconnect it. Didn't work.
    The problem still occurred.
    He told me he sent a ticket in their system to be processed WITHIN 72 business days.
    He told me we USED up only 2.5GBs.
    2nd guy: 21 Aug 2012 (Tues)
    3rd business day. Nothing has cleared. I called again.
    After a painstaken HOUR, he told me we used up all our GBs in one whole weekend somehow....
    He told me do to the same tactics the 1st guy did, despite that I told him that I've already tried them.
    Then he told me that there was pretty much nothing he could do.
    NOTHING.
    We were forced to buy 10 GBs more, that's $90 more dollars.
    3rd guy: 22 Aug 2012 (Wed)
    Disappointed by my previous "helper" I still called again.
    This time he said he'd file a report straight to their top technicians.
    He apologized for how long this problem took and shouldn't have taken this long.
    I left a callback number and he told me that I'd receive a call sometime this week or early next week.
    NO call received.
    Early That Next week, we couldn't access our account and it said we already depleted 10 GBs worth ALREADY again.
    We rarely download ANYthing. I checked their Byte Calculator and with everything we use and do, it should sum up to a little under 10 GBs per month.
    He tried to pay $90 again but they wouldn't let him.
    Apparently you can only pay twice per month.
    Theories:
    I have reason to believe likely they tried to fix the problem by completely resetting the card, and therefore showing we have no plan on it or we used it up already. I want this cleared up to we can be able to access how much we've used and act accordingly. But it feels like we're constantly handing them $90 for a task that hasn't been fulfilled yet. I want our GBs to deplete normally, not from them resetting it.
    It's been about a month and I'm unsure what to do. It's been clear to me how they don't value customer service.
    Ideas please? Greatly appreciated. Thanks in advanced.

        Hello MaraKurohi,
    I want to start with My goodness! I truly regret that you don't feel valued, that the issue still isnt' fixed, and over all our promises haven't been kept.  This is no where near the way we want you to feel as a customer, nor the way we hold ourselves as a company.
    I would love to provide some tips and tricks for data access. 
    - Ensure you close out of your web browser when you are done browsing. Sites such as Facebook or News sites refresh constantly and will use your data. Some sites have repeating advertisements on their page, that will also use data.
    - Turn off or disable any automatic updates for programs on your computer.  You can manually tell them when to update so you know exactly what is happening.
    - Disconnect the connection between the hotspot and the computer or power down the hotspot when not in use.
    I would personally offer further steps, but as it's Prepaid our Prepaid Technicians would have to be re-involved.  This is the last thing I want to say as I truly want this to be said and done for you.  Please contact our Prepaid by dialing: 888-294-6804
    Please keep us updated to your resolution!
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

  • MSI R4890 Cyclone Artifacts (not solved yet)

    I´ve recently bought my new pc to replace my 6 years old previous System
    System:
    CPU AMD Phenom II X3 [email protected] (stock)
    MSI 790GX-G65
    2x1GB mushkin Ascent DDR3 1600 (PC3 12800) @ 800MHz
    MSI R4890 Cyclone OC @ 880MHz (Stock)
    Western Digital RE3 WD2502ABYS-01B7A0 250GB 7200 RPM SATA 3.0Gb/s
    PSU Cooler Master eXtreme Power Plus 500W
    Windows XPSP2
    I have used it for two days w/o problems using Crysis at 1024x768 AA2x maxed out at more than 40fps
    And played a moded Homeworld 2 with barely unlimited unit capping and 3 AI players in 2 battles of 60 minutes each.
    but the third time my screen messed up with a white boxes grid (almost like a over heated video card), so I turned my PC off and Checked the Card temp but it was ok, so let it rest and after 2 hours tried again with another game (Because I think it could be a bug from my moded game) And I tried with NFS Pro Street 1024x768 AA8x Maxed out, and it runs well for 15 minutes and the screen messed like in homeworld, I tried to use it under those conditions for aditional 10 minutes and it runs fast but with the screen messed, so I restart it and did the same from the startup in the windows logo, but if i let it rest for a long time works well for some time like an hour or two.
    What could be causing it, May be The PSU limited power?

    Thanks for the advice.
    Today, I have finally found a computer where i could test it, and it worked with little problems because of the PSU, but not the same problems that I had, I've managed to test Unreal 3 with all the advanced settings maxed and it ran very well but, when I tested in NFS Prostreet and maxed all the settings that PC reset itself (like an energy failure, because all the fans have speed down),
    These were its specs:
    Processor: Pentium 4 @2.8Ghz
    Mainboard: ECS G31T-M7
    Memory: SuperTalent T800UB2GV @800Mhz
    PSU: Anlix ATX450T4 450W
    OS: Windows XPSP2
    I think other tings are not worth to mention, but why with those poor specs, My card was able to start with no problems.
    Maybe is something wrong with my Mainboard or something like that?
    EDIT: I've found it was a drivers Issue, I remember that I have updated my drivers a week from the installation when the problems started, When I used the the last video card drivers and the card reach it max speed artifacts started to appear in the screen, but I changed them for the ones that came in the CD.
    I'm not sure exactly what drivers where those who started the problems, maybe those where from ATI and not from the MSI page, but I would want to know what drivers are recommended for my GFX card.
    Thanks for all the help you gave me, you were very useful.
    EDIT2: It is no driver problems, it still have the problem *sigh*...
    I think I will have to do what ZSDE recommended, but I will need to be lucky to get to the OS, the VPU is restarting the video card multiple times because, it says that the video card is not responding successfully to the it.

  • Blurry/pixelated icons at random in Finder windows 02 (Not Solving Yet)

    Since the problem in the old topic (http://discussions.apple.com/thread.jspa?threadID=2132399&start=0&tstart=0), I have started new one.
    the Problem is:
    "I'm seeing a lot of blurry icons in the Finder, though, seemingly at random. I'll open a window and about half the icons will be essentially large versions of the 16x16 icon, rather than sharp icons at the appropriate size. Changing the icon size via the new slider just enlarges the blurry icon, it doesn't increase the resolution." (Eric Westby)
    This is really the most disappointing non response issue I have ever seen by Apple. I hope from Apple to address this issue.
    Thanks.

    Problem. I am experiencing problems with suddenly blurred custom Finder icons as well.
    Trigger. So far as I can tell, this happened when Software Update ran on my computer this afternoon. If I recall correctly, it updated to the latest XCode and iTunes versions pushed out this week. When it was finished, it gave me the message, "Blah blah blah your installation has finished" with an Okay button. The Finder window with my film library was open and in full view with nice, not-blurry icons. I clicked Okay to dismiss Software Update and the instant I did that it quit the Finder, must have been to rebuild something that was edited during the installation. All the open windows went away, the Finder restarted and its windows reopened. Wouldn't you know it, every single icon I had edited in the last day or three, +but none of the others+, was a pixellated blob.
    Details. This is a single folder with rips of my DVD collection made using Handbrake, one folder per film, for a total of about 400 folders.
    For each folder, I locate an image of the theater poster using Google's image search and create an icon using that image. The process I use is to open the image in Preview, ensure it is 800 px tall or less, then Select All > Copy to the Clipboard. Then I go to the Finder and do a Get Info > Tab > Paste for the folder.
    Screenshot
    My screenshot shows the sort of blurry pixellation I am getting, as seen on the icon for "Grand Central Murder (1942)" and "Graduate, The (1967) Nichols". All the rest look sharp and nice, they way they usually all do.
    Guesses. The only thing I can think of is that as you paste custom icons, the Finder is just dropping that information in a cache somewhere. It will write it out properly if it gets the time, but if the system is always telling it "not now, I'm busy" it will put it off as a low priority task. If something else then tells the Finder to restart, all those changes are lost because the cache gets hosed down when the Finder reboots. It's only a guess, but it's the best I've got.

  • Old Music app bug not solved yet!

    I've just got the 9.0.1.A.0.1 update for this app, but I've noticed that there is still a small but annoying bug that persists from the stock version (Walkman).
    The "Artists" tab is still showing just one album from any band, sometimes with a wrong year. Plz solve it!

     I've noticed another bug, if you have multiple folders for different albums, let's say you have all "The Strokes" albums and you just place them inside the "Music" folder, then you will see multiple The Strokes entries, but if you create a folder  Music > The Strokes > all the albums here  You will get only one The Strokes on the artist list  could you comment on this?

  • Voice chat on imac

    Hi~~~my yahoo messenger voice chat has been cutting out and not sure why---is this a common thing with yahoo or is this maybe a imac issue ???

    Hi Joni2b,
    Welcome to the Apple Discussions
    Any Firewire DV output (6 pin to 6pin) Camcorder
    Any Firewire Web cam
    Any USB cam that has Mac drivers and this Utility http://www.ecamm.com/mac/ichatusbcam/
    The chances are that any USB cam is going to have Windows drivers (if you need them for a Intel)
    Logitec and iMage seem to be offered up as choices at the moment.
    A Camcorder is likely to work as Mic as well others may need a separate Mic. Use USB
    2:07 PM Wednesday; January 31, 2007

  • Voice chat with psi -- Google chat

    Hello all,
    I have been trying to find a linux IM app that can use voice chat with Google Talk.  As far as I can tell, psi is supposed to support this.
    I tried version 0.11 from pacman, which connects and everything but there does not seem to be any voice chat.
    I used the AUR package and compiled the latest svn version, 0.12rc3 and it works ok, but I still can't find anything within the program to do with voice chatting.
    I have been all over the psi wiki etc., and it all seems to suggest that voice chat is included and is working with google chat, but I sure can't find it.  Some info dates back to late 2005 with the libjingle branch, but I believe libjingle is now in the main program.
    Can someone tell me if voice chat is included in psi, and if so maybe a hint on what might be going wrong for me.
    Cheers,
    Wittfella

    I have been banging my head agaist this and am slowly getting somewhere now...
    Psi does come with jingle, but its not enabled by default, because its still deemed 'experimental'.
    To get the psi-svn AUR package to compile with voice chat support you have to do a number of things:
    1.  Use the 'configure-jingle' with '--enable-jingle' option instead of the regular 'configure' script.
    ./configure-jingle --prefix=/usr --enable-jingle
    You can either modify the PKGBUILD or do it all manually.
    2.  You have to have a specific version of ortp installed otherwise it will not compile.  This happens to be ortp-0.7.1 but our pacman version is up to 0.14.0 or so.  Luckily you can find the sources for ortp-0.7.1 and it compiles and installs fine.
    3.  Now the biggest problem.  When you try to compile you will get gazillions of errors.  It turns out they are quite simple, and are caused by the incompatability problem with gcc-4.3.  Most of the errors are solved by opening the offending header file and inserting.
    #include <cstring>
    So after all that, the good news is I have managed to create a working copy of psi with voice support, however:-
    psi <--> google talk connects but there is no audio from either end
    psi <--> psi voice chat seems to work fine
    If anyone is interested I created packages for psi and ortp.  Let me know if you have any more success with google talk.
    psi-jingle-1166-1-i686.pkg.tar.gz
    ortp-0.7.1-1-i686.pkg.tar.gz

  • Hi all. I want to make audio chat with my brother. I use iChat on my MBP. He uses Gtalk on his windows PC. The problem is that the audio icon is gray. Is there anyway? Can iChat make voice chat with Gtalk on windows?

    Hi all. I want to make audio chat with my brother. I use iChat on my MBP. He uses Gtalk on his windows PC. The problem is that the audio icon is gray so I cannot start audio chat. Is there anyway? Can iChat make voice chat with Gtalk on windows or not? I am confused.

    HI,
    You need to satisfy several things along the way
    Account type
    You need to have a Jabber or Google mail Account your self.
    If you have a Google Mail Account then it needs the "Talk" option Enabled in your Google account Settings ( A Facebook with "Chat" enabled is also a  valid Jabber ID to use in iChat).
    Connection Method
    This is about which apps can connect to which apps for Video ro Audio to work.
    iChat Video when using a Jabber account is iChat to iChat Only.
    iChat connects using a process called SIP (Session Initiation Protocol)
    Jabber based Apps if they have  an A/V module connect using protocol called Jingle.
    Needless to say Google do their own version of this that is written in to the web Browser Plugin that allows Video Chats (there are PC and Mac versions), and in the PC app called GoogleTalk.
    However it is also not that compatible with other Jabber apps.
    See Jingle here
    This claims, now, that Google had a hand in writing the Protocol.
    Also in the "Clients Supporting Jingle" list many more version of Google products are mentioned with extended info. (it suggests that someone at Google has been editing the page).
    Can iChat make voice chat with Gtalk on windows or not?
    The specific answer to this to be clear is NO.
    We are talking about different Apps (or web Browser Plugins) using different Internet Protocols that are not compatible.
    The simplest thing is to get the Web Browser Plugin (However there can be issues with the  Flash Plugin)
    At one time Google used Flash to do Video Chats and it would seem their Plugin is very close to this part of Flash.
    See the Known Issues and the "Google Talk Plugin Disables iSight On Mac" item.
    Options
    Use a Web Browser yourself with the Plugin.
    Use a Flash Base Site such as MeBeam  (Flash has to be enabled in your Browser and the instructions are simple on the page)
    Try to find a Jingle capable Mac Jabber Client (app) ( I have not found one).
    9:42 PM      Monday; July 23, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My Invert command won't work.

    I am having a difficult time. My invert won't work, not even when I run actions. I am very frusterated. Please help.

    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for