Voice command , how to generate the coefficients and output as matrix

Hello. I am trying to do a program that can tell"1.2.3.4" I found a template on the internet,Firstly it generate the coefficients and output it to a Real Matrix just like the following picture. However,I don't know how can I record my own coefficients in the matrix, how can I introduce these in my dictionary,could you please help me out?

Don't start multiple threads. It just wastes people's time. Keep it to the original thread - http://forums.ni.com/t5/LabVIEW/labview-voice-recognition-how-to-transfer-your-voice-into-MFCC/m-p/2...
Try to take over the world!

Similar Messages

How to generate the BPEL interface from XSD?

I am new to the BPEL. How to generate the BPEL interface from XSD because I need the inputed payload to have a complex type instead the simple string?
Thank you

I made the following change to the xsd file, however when the input type change to emailDataType, it is underline by red color. and the bpm process, activity guide, organization become the unknown project object.
<?xml version="1.0" encoding="UTF-8"?>
<schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/SampleBPM/SampleEmailNotification/SendEmail"
     xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="process">
          <complexType>
               <sequence>
                    <element name="input" type="emailDataType"/>
               </sequence>
          </complexType>
     </element>
     <element name="processResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
<complexType name="emailDataType" >
<sequence>
<element name="toEmailAddress" type="string" />
<element name="ccEmailAddress" type="string" />
<element name="emailSubject" type="string" />
<element name="emailContent" type="string" />
</sequence>
</complexType>
</schema>
The XSD file is viewed by the design mode is fine on JDeveloper. Please help!

How to generate the deferent pdfs for deferent vendor ?

Hi,
i have requirement to generate the each pdf for each vendor and i need to mail those pdfs to respective vendor,
here i am facing the prob to generate the no of pdfs for deferent vendors...please can any one help me in this how i generate the no of pdfs ?? using wrapeer program ....
if possible any one can provide some example code..(Exmplae program)
Thanks,
PK..

There are two function use one for convert PDF and second use to email, hope it will give u idea proper.
Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = gs_otfdata-otfdata[].
Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = gv_bin_filesize
    TABLES
      otf                   = gt_otf
      lines                 = gt_pdf_tab
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      OTHERS                = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = gs_docdata
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = gt_objpack
        contents_bin               = gt_objbin
        receivers                  = gt_reclist
      contents_txt               = i_objtxt
        object_header              = objhead
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.

How to generate the DNS_VERIFY program

I�d like to prevent form the spam mails from internet. I edited the mappings table of orig_mail_access segment, but I couldn't find the DNS_verify program in the iPlanet Messaging Server 5.1. Not knowing how to generate the DNS_VERIFY program in the iPlanet Messaging Server 5.1. Could you please kindly check and let me know the way to solve? Thank you very much!
ps. system info.: solaris8.0,iPlanet Messaging Server 5.1 Patch 1 (built Jun 6 2002)

look at this link
http://www.stylusstudio.com/docs/v2006/d_help30.html
I read sometime back that castor has a tool to do
conversion. You might have a look into casto as well.

How to generate the Cobol Source part of the ApplicationViewer

Hello,
I'm actually generate the Cobol Source part of the application viewer on a windows environment.
I'm trying to build it from a Unix environment but I don't know how because I doesn't find the same script in Unix I use in windows.
Can someone tell me how to generate the Cobol Source part of the application Viewer please ?
Thank you in advance.

>
How can I read the html source code of a webpage
with a java application?
Is there a good idea?
I don't know if this is a good idea, but it works.
1) Use a URL to obtain the document's location
2) Use a URLConnection to open a connection between your computer and the
document server
3) Connect to the server
4) Get the InputStream of said connection
5) Associate the Input Stream with a Buffered Input Stream
At this point you can use a loop to read lines from the BufferedInput Stream and append them to a TextArea or other suitable text component.

How to generate the insert script of the tables data present in an entire

How to generate the insert script of the tables data present in an entire schema in sqlplus environment
with out toad can you please help me please!!!!!!!!!!!!!

HI,
First create this function to get insert scripts.
/* Formatted on 2012/01/16 10:41 (Formatter Plus v4.8.8) */
CREATE OR REPLACE FUNCTION extractdata (v_table_name VARCHAR2)
   RETURN VARCHAR2
AS
   b_found   BOOLEAN         := FALSE;
   v_tempa   VARCHAR2 (8000);
   v_tempb   VARCHAR2 (8000);
   v_tempc   VARCHAR2 (255);
BEGIN
   FOR tab_rec IN (SELECT table_name
                     FROM user_tables
                    WHERE table_name = UPPER (v_table_name))
   LOOP
      b_found := TRUE;
      v_tempa := 'select ''insert into ' || tab_rec.table_name || ' (';
      FOR col_rec IN (SELECT   *
                          FROM user_tab_columns
                         WHERE table_name = tab_rec.table_name
                      ORDER BY column_id)
      LOOP
         IF col_rec.column_id = 1
         THEN
            v_tempa := v_tempa || '''||chr(10)||''';
         ELSE
            v_tempa := v_tempa || ',''||chr(10)||''';
            v_tempb := v_tempb || ',''||chr(10)||''';
         END IF;
         v_tempa := v_tempa || col_rec.column_name;
         IF INSTR (col_rec.data_type, 'CHAR') > 0
         THEN
            v_tempc := '''''''''||' || col_rec.column_name || '||''''''''';
         ELSIF INSTR (col_rec.data_type, 'DATE') > 0
         THEN
            v_tempc :=
                  '''to_date(''''''||to_char('
               || col_rec.column_name
               || ',''mm/dd/yyyy hh24:mi'')||'''''',''''mm/dd/yyyy hh24:mi'''')''';
         ELSE
            v_tempc := col_rec.column_name;
         END IF;
         v_tempb :=
               v_tempb
            || '''||decode('
            || col_rec.column_name
            || ',Null,''Null'','
            || v_tempc
            || ')||''';
      END LOOP;
      v_tempa :=
            v_tempa
         || ') values ('
         || v_tempb
         || ');'' from '
         || tab_rec.table_name
         || ';';
   END LOOP;
   IF NOT b_found
   THEN
      v_tempa := '-- Table ' || v_table_name || ' not found';
   ELSE
      v_tempa := v_tempa || CHR (10) || 'select ''-- commit;'' from dual;';
   END IF;
   RETURN v_tempa;
END;
SET PAUSE OFF
SET LINESIZE 1200
SET PAGESIZE 100
SET TERMOUT OFF
SET HEAD OFF
SET FEED OFF
SET ECHO OFF
SET VERIFY OFF
SPOOL GET_INSERTS.SP REP
SELECT EXTRACTDATA('EMP') FROM DUAL;
SPOOL OFF
SET PAUSE ON
SET LINESIZE 120
SET PAGESIZE 14
SET TERMOUT ON
SET HEAD ON
SET FEED 5
SET ECHO ON
SET VERIFY ON
SELECT    'insert into EMP ('
       || CHR (10)
       || 'EMPNO,'
       || CHR (10)
       || 'ENAME,'
       || CHR (10)
       || 'JOB,'
       || CHR (10)
       || 'MGR,'
       || CHR (10)
       || 'HIREDATE,'
       || CHR (10)
       || 'SAL,'
       || CHR (10)
       || 'COMM,'
       || CHR (10)
       || 'DEPTNO) values ('
       || DECODE (empno, NULL, 'Null', empno)
       || ','
       || CHR (10)
       || ''
       || DECODE (ename, NULL, 'Null', '''' || ename || '''')
       || ','
       || CHR (10)
       || ''
       || DECODE (job, NULL, 'Null', '''' || job || '''')
       || ','
       || CHR (10)
       || ''
       || DECODE (mgr, NULL, 'Null', mgr)
       || ','
       || CHR (10)
       || ''
       || DECODE (hiredate,
                  NULL, 'Null',
                     'to_date('''
                  || TO_CHAR (hiredate, 'mm/dd/yyyy hh24:mi')
                  || ''',''mm/dd/yyyy hh24:mi'')'
       || ','
       || CHR (10)
       || ''
       || DECODE (sal, NULL, 'Null', sal)
       || ','
       || CHR (10)
       || ''
       || DECODE (comm, NULL, 'Null', comm)
       || ','
       || CHR (10)
       || ''
       || DECODE (deptno, NULL, 'Null', deptno)
       || ');'
FROM emp;
SELECT '-- commit;'
FROM DUAL;now run the baove select statement you will get the following insert statements
/* Formatted on 2012/01/16 10:57 (Formatter Plus v4.8.8) */
--'INSERT INTO EMP('||CHR(10)||'EMPNO,'||CHR(10)||'ENAME,'||CHR(10)||'JOB,'||CHR(10)||'MGR,'||CHR(10)||'HIREDATE,'||CHR(10)||'SAL,'||CHR(10)||'COMM,'||CHR(10)||'DEPTNO)VALUES('||DECODE(EMPNO,NULL,'NULL',EMPNO)||','||CHR(10)||''||DECODE(ENAME,NULL,'NULL',''''|
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm, deptno
     VALUES (7369, 'SMITH', 'CLERK', 7902,
             TO_DATE ('12/17/1980 00:00', 'mm/dd/yyyy hh24:mi'), 800, NULL, 20
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm, deptno
     VALUES (7499, 'ALLEN', 'SALESMAN', 7698,
             TO_DATE ('02/20/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1600, 300, 30
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm, deptno
     VALUES (7521, 'WARD', 'SALESMAN', 7698,
             TO_DATE ('02/22/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1250, 500, 30
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7566, 'JONES', 'MANAGER', 7839,
             TO_DATE ('04/02/1981 00:00', 'mm/dd/yyyy hh24:mi'), 2975, NULL,
             20
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7654, 'MARTIN', 'SALESMAN', 7698,
             TO_DATE ('09/28/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1250, 1400,
             30
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7698, 'BLAKE', 'MANAGER', 7839,
             TO_DATE ('05/01/1981 00:00', 'mm/dd/yyyy hh24:mi'), 2850, NULL,
             30
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7782, 'CLARK', 'MANAGER', 7839,
             TO_DATE ('06/09/1981 00:00', 'mm/dd/yyyy hh24:mi'), 2450, NULL,
             10
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7788, 'SCOTT', 'ANALYST', 7566,
             TO_DATE ('04/19/1987 00:00', 'mm/dd/yyyy hh24:mi'), 3000, NULL,
             20
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7839, 'KING', 'PRESIDENT', NULL,
             TO_DATE ('11/17/1981 00:00', 'mm/dd/yyyy hh24:mi'), 5000, NULL,
             10
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm, deptno
     VALUES (7844, 'TURNER', 'SALESMAN', 7698,
             TO_DATE ('09/08/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1500, 0, 30
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7876, 'ADAMS', 'CLERK', 7788,
             TO_DATE ('05/23/1987 00:00', 'mm/dd/yyyy hh24:mi'), 1100, NULL,
             20
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm, deptno
     VALUES (7900, 'JAMES', 'CLERK', 7698,
             TO_DATE ('12/03/1981 00:00', 'mm/dd/yyyy hh24:mi'), 950, NULL, 30
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7902, 'FORD', 'ANALYST', 7566,
             TO_DATE ('12/03/1981 00:00', 'mm/dd/yyyy hh24:mi'), 3000, NULL,
             20
INSERT INTO emp
            (empno, ename, job, mgr,
             hiredate, sal, comm,
             deptno
     VALUES (7934, 'MILLER', 'CLERK', 7782,
             TO_DATE ('01/23/1982 00:00', 'mm/dd/yyyy hh24:mi'), 1300, NULL,
             10
            );i hope this helps .
Thanks,
P Prakash
Edited by: prakash on Jan 15, 2012 9:21 PM
Edited by: prakash on Jan 15, 2012 9:22 PM

How to generate the reports in BI and display in EP ?

Hi All
   I am new to BI but i am working on EP
   Can any one help me how to generate the reports in BI and should be displayed
   in EP frontend? So what and all settings and installations i need to do ?
   Any documents on this will be really helpful to me..........
Adv...thanks and regards
Kops

Hi kops,
Check the links below.What you need is there..
How can i place a query developed in BEX to portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm

How to generate the ARE-1 from SAP?

Hi,
Please suggest how to generate the ARE-1 form from SAP and what are the settings we have to do for it. Please suggest the settings and T. codes
Thanks in advance...
Regards
NItin

Hi,
You need to do the complete customization of
SPRO>Logistics General> Tax on goods Movements>India for processing CIN relevant transactions.
Check this link:
http://wiki.sdn.sap.com/wiki/display/ERPLO/CIN+Configuration
CIN Version - ARE1 & ARE3 Configuration
This is the transaction where we define which series group belongs to exports.
SPRO>Logistics General> Tax on goods Movements>India> Business Transactions> Out going excise invoices> Maintain Default excise groups and series groups.
VA01 - Order
VL01n - outbound delivery
VF01 - Export Billing
J1iin - excise invoice for exports
J1ibn01 - Create Bond
J1ia101 - create/post/ update/Change/Display ARE1.
J1iBn05 u2013 Close bond
Hope this helps.
Regards,
Sharan

How to show the first page and then rest will be created in background

Dear Friends,
I am suffering from some seriouse issue of slow opening of report....
I am using vs2005 and asp.net 2.0 and crXI R2 sp4,
using oledb for getting data from ms sql server 2005.
Now my one report called accounts ledger
when i execute the report query it takes 1.03 mins for 515000 records..no issue with it ,
when i execute the report from report desginer for 515000 records its taking 26 mins . It is generating all
32000 pages.
Now same report i run from my web based erp application it takes 30mins to execute 32000 pages now
this is too much time it is taking and now our client is fedup of ussss..
So is there any way that we can show First page at the earliest and rest of the pages willl be getting created in background? is it possible ?
We have to give them the solution as sson as possible...
can anyone suggest the diff ways to get out of this problem .......
Please ur co operation will be appriciated....
thansk

Hi Mithun,
Here are a few points related to performance issue. These might be helpful.
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of records returned
( If a SQL query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated?
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated
in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to
SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100
records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest
factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports. Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page
of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested. It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports.
SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set. It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards,
Shweta

How to test the extended controller and AM Object

I added a button in a OAF page and extended the CO and AM. When we click this button, an XML Publisher concurrent program should be called and the PO will be displayed in PDF format.
What is the best way to test this. Should I copy all the libraries from oracle/apps/... to my pc and attach or can I test without doing this. If so, what is the best approach.
I am new to this.
Thanks for your Help.
HP

I got the code ready for with extended Co java file. How can test this. How to generate the class file. Once I gerenarate the class file, if I ftp the file to cust/oracle/apps/pos/changeorder/webui and in the personalization if I attach this CO and run the page and click the button will this call the new CO? Yes after FTP the Contorller class file to appropriate path and attach the extended controller through personalization New Controller will get called.
But DO REMEMBER TO BOUNCE THE APPACHE SERVER then only the extended Controller file get called.
here is the link having steps to bounce it for Apps 11i.
http://oracleanil.blogspot.com/2009/04/ncrimmessageproc.html
Please let me know if these steps are correct..
1. New OAWorkSpace
2. New Project
3. right click on project and click New class to generate the extended CO Class.Yes, It is right..
Thanks
--Anil
http://oracleanil.blogspot.com

How to know the image size and coding of our j2me project

Hi,
I have developed a game and i did the obfuscation. My jar size is now 170KB. How can differentiate the coding size and the image size from the total jar size.
If i asked any thing wrongly, please forgive me and clarify my doubt.
I am looking forward to meet ur queries if any.
Thanks and Regards,
Hithayath.

<?xml version="1.0" encoding="UTF-8"?>

<project xmlns:projdeps2="http://www.netbeans.org/ns/ant-project-references/2" basedir=".." default="jar" name="-impl">
<target name="pre-init"/>
<target depends="pre-init" name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property value="0.0.1" name="deployment.number"/>
<property value="000002" name="deployment.counter"/>
<property location="${netbeans.user}/build.properties" name="user.properties.file"/>
<available file="${user.properties.file}" property="user.properties.file.exists"/>
</target>
<target unless="config.active" depends="pre-load-properties" name="exists.config.active">
<echo message="Active configuration (config.active property) is not set - using default." level="warning"/>
<property name="config.active" value=""/>
</target>
<target unless="netbeans.user" depends="pre-load-properties" name="exists.netbeans.user">
<echo message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically." level="warning"/>
</target>
<target unless="user.properties.file.exists" depends="pre-load-properties" name="exists.user.properties.file">
<echo message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)." level="warning"/>
</target>
<target depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file" name="load-properties">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex replace="platform." pattern="^platforms\.${platform.active}\."/>
<replaceregex replace="deployment.scriptfile=" pattern="^deployment\.${deployment.method}\.scriptfile="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<target unless="platform.active" depends="load-properties" name="exists.platform.active">
<echo message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)." level="warning"/>
</target>
<target depends="load-properties" unless="platform.configuration" name="exists.platform.configuration">
<echo message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration." level="warning"/>
<property value="CLDC-1.0" name="platform.configuration"/>
</target>
<target depends="load-properties" unless="platform.profile" name="exists.platform.profile">
<echo message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile." level="warning"/>
<property value="MIDP-1.0" name="platform.profile"/>
</target>
<target depends="pre-init,load-properties,exists.platform.active,exists.platform.configuration,exists.platform.profile" name="init">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-modules-kjava-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<fail unless="dist.jad">Must set dist.jad</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<property value="" name="abilities"/>
<property value="" name="obfuscator.classpath"/>
<property value="" name="kjava.configuration"/>
<property value="UEI-1.0" name="platform.type"/>
<property value="" name="platform.device"/>
<property value="0" name="obfuscation.level"/>
<property value="false" name="sign.enabled"/>
<property value="file://" name="dist.jad.url"/>
<property value="1.3" name="javac.source"/>
<property value="1.1" name="javac.target"/>
<property value="${file.encoding}" name="javac.encoding"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition value="${filter.excludes},**/*Test.java,**/test,**/test/**" property="filter.excludes.evaluated">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property value="${filter.excludes}" name="filter.excludes.evaluated"/>
<condition value="" property="evaluated.run.security.domain">
<isfalse value="${run.use.security.domain}"/>
</condition>
<condition value="" property="deployment.do.override.jarurl">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<property value="${run.security.domain}" name="evaluated.run.security.domain"/>
<taskdef resource="org/netbeans/modules/kjava/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<uptodate targetfile="${preprocessed.dir}/.timestamp" property="no.clean.before.build">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
<condition property="skip.deployment">
<equals trim="true" casesensitive="false" arg2="NONE" arg1="${deployment.method}"/>
</condition>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore.password}"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias.password}"/>
</not>
</and>
</or>
</condition>
<antcall inheritrefs="true" inheritall="true" target="post-init"/>
</target>
<target name="post-init"/>
<target name="deps-jar" depends="init" unless="no.deps"/>
<target description="Clean project in case its meta information has changed." unless="no.clean.before.build" depends="init" name="conditional-clean">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<target name="pre-preprocess"/>
<target description="Preprocess project sources." depends="init,pre-preprocess,deps-jar,conditional-clean" name="preprocess">
<mkdir dir="${preprocessed.dir}"/>
<echo file="${preprocessed.dir}/.timestamp" message="ignore me"/>
<nb-prep encoding="${javac.encoding}" preprocessfor="${config.active},${abilities}" destdir="${preprocessed.dir}">
<fileset excludes="${filter.excludes.evaluated}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</nb-prep>
<antcall inheritrefs="true" inheritall="true" target="post-preprocess"/>
</target>
<target name="post-preprocess"/>
<target description="Extracts all bundled libraries." depends="init,deps-jar,conditional-clean" name="extract-libs">
<mkdir dir="${build.classes.dir}"/>
<nb-extract excludeManifest="true" dir="${build.classes.dir}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</nb-extract>
</target>
<target name="pre-compile"/>
<target description="Compile project classes." depends="init,preprocess,extract-libs,pre-compile" name="compile">
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" bootclasspath="${platform.bootclasspath}" srcdir="${preprocessed.dir}" destdir="${build.classes.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset excludes="${filter.excludes.evaluated},${build.classes.excludes}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</copy>
<antcall inheritrefs="true" inheritall="true" target="post-compile"/>
</target>
<target name="post-compile"/>
<target name="pre-compile-single"/>
<target description="Compile selected project classes." depends="init,preprocess,extract-libs,pre-compile-single" name="compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" includes="${javac.includes}" bootclasspath="${platform.bootclasspath}" destdir="${build.classes.dir}" srcdir="${preprocessed.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<antcall inheritrefs="true" inheritall="true" target="post-compile-single"/>
</target>
<target name="post-compile-single"/>
<target depends="init" name="create-jad">
<mkdir dir="${build.dir}"/>
<dirname property="dist.jad.dir" file="${dist.dir}/${dist.jad}"/>
<mkdir dir="${dist.jad.dir}"/>
<condition value="${manifest.apipermissions}" property="evaluated.manifest.apipermissions">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition value="${manifest.pushregistry}" property="evaluated.manifest.pushregistry">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains string="${manifest.others}" substring="MicroEdition-Configuration: "/>
</condition>
<condition property="contains.manifest.profile">
<contains string="${manifest.others}" substring="MicroEdition-Profile: "/>
</condition>
<property name="evaluated.manifest.apipermissions" value=""/>
<property name="evaluated.manifest.pushregistry" value=""/>
<property value="" name="manifest.jad"/>
<property value="" name="manifest.manifest"/>
<echo file="${dist.dir}/${dist.jad}">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</echo>
<echo file="${build.dir}/manifest.mf">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</echo>
<antcall inheritrefs="true" inheritall="true" target="add-configuration"/>
<antcall inheritrefs="true" inheritall="true" target="add-profile"/>
</target>
<target unless="contains.manifest.configuration" name="add-configuration">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Configuration: ${platform.configuration}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Configuration: ${platform.configuration}
</echo>
</target>
<target unless="contains.manifest.profile" name="add-profile">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Profile: ${platform.profile}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Profile: ${platform.profile}
</echo>
</target>
<target name="pre-obfuscate"/>
<target description="Up-to-date check before obfuscation." depends="init,compile" name="obfuscate-check">
<uptodate targetfile="${obfuscator.destjar}" property="no.obfusc">
<srcfiles dir="${build.classes.dir}"/>
</uptodate>
</target>
<target unless="no.obfusc" description="Obfuscate project classes." depends="init,compile,obfuscate-check,pre-obfuscate" name="obfuscate">
<dirname property="obfuscator.srcjar.dir" file="${obfuscator.srcjar}"/>
<dirname property="obfuscator.destjar.dir" file="${obfuscator.destjar}"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar basedir="${build.classes.dir}" jarfile="${obfuscator.srcjar}"/>
<property value="" name="obfuscation.custom"/>
<nb-obfuscate extraScript="${obfuscation.custom}" obfuscationLevel="${obfuscation.level}" classpath="${platform.bootclasspath}" obfuscatorclasspath="${obfuscator.classpath}" destjar="${obfuscator.destjar}" srcjar="${obfuscator.srcjar}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar dest="${obfuscated.classes.dir}" src="${obfuscator.destjar}"/>
<antcall inheritrefs="true" inheritall="true" target="post-obfuscate"/>
</target>
<target name="post-obfuscate"/>
<target name="pre-preverify"/>
<target description="Preverify project classes." depends="init,compile,obfuscate,pre-preverify" name="preverify">
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify commandline="${platform.preverifycommandline}" platformtype="${platform.type}" platformhome="${platform.home}" configuration="${platform.configuration}" classpath="${platform.bootclasspath}" destdir="${preverify.classes.dir}" srcdir="${obfuscated.classes.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-preverify"/>
</target>
<target name="post-preverify"/>
<target unless="skip-sign-keystore-password-input" if="netbeans.home" depends="init" name="set-keystore-password">
<nb-enter-password passwordproperty="sign.keystore.password" keystore="${sign.keystore}"/>
</target>
<target unless="skip-sign-alias-password-input" if="netbeans.home" depends="init" name="set-alias-password">
<nb-enter-password passwordproperty="sign.alias.password" keyalias="${sign.alias}" keystore="${sign.keystore}"/>
</target>
<target name="pre-jar"/>
<target description="Build jar and application descriptor." depends="init,preverify,create-jad,set-keystore-password,set-alias-password,pre-jar" name="jar">
<dirname property="dist.jar.dir" file="${dist.dir}/${dist.jar}"/>
<mkdir dir="${dist.jar.dir}"/>
<jar manifest="${build.dir}/manifest.mf" jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}">
<fileset dir="${preverify.classes.dir}"/>
<fileset dir="${obfuscated.classes.dir}">
<exclude name="**/*.class"/>
</fileset>
</jar>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${dist.jar}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
<antcall inheritrefs="true" inheritall="true" target="post-jar"/>
</target>
<target name="post-jar"/>
<target description="Rebuild the application." depends="init,clean,jar" name="rebuild"/>
<target description="Run MIDlet suite." depends="init,jar" name="run">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target description="Quick Run already built MIDlet suite." depends="init" name="run-no-build">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target depends="init,clean,jar" description="Debug project." name="debug">
<delete file="${preprocessed.dir}/.timestamp"/>
<parallel>
<nb-run commandline="${platform.debugcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" jadfile="${dist.dir}/${dist.jad}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" debuggeraddressproperty="jpda.port" debugserver="true" debugsuspend="true" debug="true"/>
<sequential>
<sleep seconds="5"/>
<antcall target="nbdebug"/>
</sequential>
</parallel>
</target>
<target if="netbeans.home" description="Start NetBeans debugger" name="nbdebug">
<nb-kjava-debug period="2000" timeout="30000" name="${app.codename}" address="${jpda.port}">
<bootclasspath>
<path path="${platform.bootclasspath}"/>
</bootclasspath>
<classpath>
<path path="${dist.dir}/${dist.jar}"/>
</classpath>
<sourcepath>
<path path="${src.dir}"/>
<path path="${libs.src.path}"/>
</sourcepath>
</nb-kjava-debug>
</target>
<target depends="init,preprocess" name="javadoc">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc private="${javadoc.private}" windowtitle="${javadoc.windowtitle}" version="${javadoc.version}" author="${javadoc.author}" splitindex="${javadoc.splitindex}" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" use="${javadoc.use}" notree="${javadoc.notree}" bootclasspath="${platform.bootclasspath}" destdir="${dist.javadoc.dir}" source="${javac.source}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
<sourcepath>
<pathelement location="${preprocessed.dir}"/>
</sourcepath>
<fileset dir="${preprocessed.dir}"/>
</javadoc>
<antcall target="browse-javadoc"/>
</target>
<target unless="no.javadoc.preview" if="netbeans.home" name="browse-javadoc">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target name="pre-clean"/>
<target description="Clean build products." if="no.clean.before.build" depends="init,conditional-clean" name="clean">
<antcall inheritrefs="true" inheritall="true" target="do-clean"/>
</target>
<target depends="pre-clean" name="do-clean">
<delete dir="${preprocessed.dir}"/>
<delete dir="${build.classes.dir}"/>
<delete file="${obfuscator.srcjar}"/>
<delete file="${obfuscator.destjar}"/>
<delete dir="${obfuscated.classes.dir}"/>
<delete dir="${preverify.classes.dir}"/>
<delete file="${build.dir}/manifest.mf"/>
<delete file="${dist.dir}/${dist.jar}"/>
<delete file="${dist.dir}/${dist.jad}"/>
<delete dir="${dist.javadoc.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-clean"/>
</target>
<target name="post-clean"/>
<target name="pre-deploy"/>
<target if="deployment.do.override.jarurl" depends="init,jar,pre-deploy" name="override-jad">
<property value="${dist.jar}" name="deployment.jarurl"/>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${deployment.jarurl}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target unless="skip.deployment" if="deployment.method" depends="init,jar,override-jad,pre-deploy" name="deploy">
<fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
<ant inheritrefs="true" inheritall="true" antfile="${deployment.scriptfile}">
<property location="${dist.dir}/${dist.jad}" name="deployment.jad"/>
<property location="${dist.dir}/${dist.jar}" name="deployment.jar"/>
</ant>
<propertyfile file="nbproject/private/private.properties">
<entry pattern="000000" default="2" operation="+" type="int" key="deployment.counter"/>
<entry value="${deployment.counter}" key="deployment.number"/>
</propertyfile>
<replaceregexp replace="deployment.number=\2\3.\5\6.\8\9" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" file="nbproject/private/private.properties" byline="true"/>
<antcall inheritrefs="true" inheritall="true" target="post-deploy"/>
</target>
<target name="post-deploy"/>
<target name="for-all-configs">
<antcall inheritrefs="false" inheritall="false" target="${target.to.call}">
<param value="" name="config.active"/>
</antcall>
</target>
<target name="jar-all">
<antcall target="for-all-configs">
<param value="jar" name="target.to.call"/>
</antcall>
</target>
<target name="javadoc-all">
<antcall target="for-all-configs">
<param value="javadoc" name="target.to.call"/>
</antcall>
</target>
<target name="deploy-all">
<antcall target="for-all-configs">
<param value="deploy" name="target.to.call"/>
</antcall>
</target>
<target name="rebuild-all">
<antcall target="for-all-configs">
<param value="rebuild" name="target.to.call"/>
</antcall>
</target>
<target depends="load-properties" name="clean-all">
<fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
<fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
<delete dir="${build.root.dir}"/>
<delete dir="${dist.root.dir}"/>
<antcall target="for-all-configs">
<param value="clean" name="target.to.call"/>
</antcall>
</target>
</project>
I have pasted the content of that file, please do the needs....

Generating the .CAP, .JCA and .EXP files.

Hello;
I have downloaded the java_card_kit-2_1_2 to ‘C:\java_card_kit-2_2_1", and I tried to compile HelloWorld application that shipped with its distribution. I was successfully able to compile the file HelloWorld.java, but I am having lots of problems in generating the .CAP, .JCA and .EXP files.
I tried to follow the instructions in jcdk2.2.1 user guide, but of no use.
This is what I am basically doing:
_Step1) Setting my Environment Variables as follows:_
*set JC_HOME=C:\java_card_kit-2_2_1*
*set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_16*
*set PATH=.;%JC_HOME%\bin;%JAVA_HOME%\bin;%PATH%*
_Step2) Compile the java file_
The package of HelloWorld.java is : src.com.sun.javacard.samples.HelloWorld, so to compile I use the following command line:
*javac -g -target 1.1 -source 1.3 -classpath .\classes;..\lib\api.jar;..\lib\installer.jar src\com\sun\javacard\samples\HelloWorld\*.java*
_Step3) Converting_
I have the class file generated in the package folder: src.com.sun.javacard.samples.HelloWorld, I generated an .opt file as follows:
+-out EXP JCA CAP+
+-exportpath .+
+-debug+
+-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1 src.com.sun.javacard.samples.HelloWorld.HelloWorld+
+src.com.sun.javacard.samples.HelloWorld 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0+
Finally, the command line for conversion is:
*set _CLASSES=%JC_HOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;%JC_HOME%\samples\classes;%CLASSPATH%;*
*"%JAVA_HOME%\bin\java" -classpath %_CLASSES% com.sun.javacard.converter.Converter -config src\com\sun\javacard\samples\HelloWorld\HelloWorld.opt*
After successfully executing all these lines, I get the following error:
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
*+error: class HelloWorld does not belong to package src.com.sun.javacard.samples.HelloWorld.+*
conversion completed with 1 errors and 0 warnings.
PLEASE HELP! I also tried adding -classdir to the opt file, but still did not work.
The whole point behind this exercise is to import a javacard framework of version 1.0
Really appreciate anyone's help! Thanks in advance.

Thank you Shane, but my claSs file is indeed saved in "C:\java_card_kit-2_2_1\samples\src\com\sun\javacard\samples\HelloWorld"
Now since I am running my command lines from C:\java_card_kit-2_2_1\samples, so I guess that the class directory is:
src.com.sun.javacard.samples.HelloWorld
Right?

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to print the row ,column,and particular cell in separate color

how to print the row ,column,and particular cell in separate color IN ALV GRID

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How to restrict the last record and not moving to next reocrd

1) how to restrict the last record and not moving to next reocrd.
2) Also for the F6 key(for new record).

When you are on the last record, next-record will create a new one, so that my question is do you want to forbid new record creation.
Francois

Voice command , how to generate the coefficien​ts and output as matrix

Similar Messages

Maybe you are looking for

Voice command , how to generate the coefficients and output as matrix