Voiding Links when Loading a Movie

From my index page, when someone clicks on a link it loads a
movie clip on top of that page. However, once they are on that new
page, the links from my index page are still showing up. As you
move the arrow around the page you will see the hand come up where
the links were on the index page. How can I void this so that those
links don't show up/aren't active on every other page of the
website?
I'm desperate for help on this question!!!
Thank you!
Kristine

When you say index page, are you talking about a "page" in
Flash or an HTML page? I'm assuming you are talking about Flash.
Second question, how is your FLA set up to go to different
sections? Are you using frame labels across your main timeline?
Also, are your links in text or are they buttons?
One thing you can do if you are using a timeline approach is
to simply place a keyframe on the layer that holds your link at
each page/section and remove the link completely on areas is it not
needed. If it's a button or movieclip, you can disable it on
sections it's not needed.
So, you'd place this code in the actions layer on a keyframe
at each section. You do have your topmost layer set as an actions
layer, right? :)
myBtn2_btn.enabled = false;
Then on the keyframe on your "index" section, you'd want to
enable it again.
myBtn2_btn.enabled = true;

Similar Messages

Forms not run when loading from movie master

I have a movie called index loading two movies contain forms
into a movieclip, but not functionally correctly. Otherwise running
the SWF individually run correctly.
How fix this???

sounds like you may have calls to either _root or _level0 in
your loaded files.
if they are to _root, you can solve by applying the _lockroot
property to the load target MCs.

Black screen when loading CP4 movie in flash layer

Since I installed the latest Flash Player 11.1 I've encountered a strange probleem. When I load a CP4 SWF movie (with standard CP preloader) sometimes I get a black screen. I can't find the problem? Who does have an idea where to find the problem?

A year or so ago there was a similar issue with a Flash Player release: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/flash-player- conflicts-with-text-animations
On that occasion it turned out to be an issue with Text Animations in Cp5 being incompatible with the new version of FP.
Since you're on Cp4 and you're using a totally different version of Flash Player it would seem unlikely to be the same issue, but your mention of a Black Screen makes me wonder if perhaps there might be some element from Cp4 which is conflicting.
You can try a process of elimination to locate the slide or slides on which the conflict might exist. Just hide all slides in one half of the project and publish to see if the issue remains. If it does, unhide all of the first slides and then hide all slides in the other half of the project. If the issue is resolved, keep hiding specific groups of slides until you locate the issue. If it's confined to a single slide, try deleting elements on the slide and then publishing to see if you can find the offending item.

Loader shows error when loading cs4 movies which uses matrix 3d class

I am trying to load an swf which is made using cs4 and which uses the classes "flash.geom.Matrix3d" and "flash.text.engine", but when i load it it shows error and the swf is not getting loaded. i am getting the following error.
ReferenceError: Error #1065: Variable flash.geom::Matrix3D is not defined.
at prova_fla::MainTimeline()
VerifyError: Error #1014: Class flash.text.engine::ContentElement could not be found.
at global$init()
at visup.utils::AdvancedText()
at prova_fla::MainTimeline/frame1()
The issue happens only when i try to load the swf using the loader. Opening the loading swf seperatly does not have any issues. I am using flex builder 3 and using Actionscript 3.
Thanks in advance.

are you publishing for flash 10?

I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?

I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?
P.S running software version 4.3.3

I have the same problem on an original iPad.

When I Load a Movie or New Movie it doesn't completely Load

When I Load a Movie or New Movie it doesn't completely Load. So When I click the iMovie HD Icon on My little Bar thing. The screen comes up and the blue bar Only Goes to the Middle and stops. It says to wait a few minutes, But I have waited 7 hours and more everyday. Please Help. I Love to make Movies, and I'd hate for my passion to Stop.
Mac OS X Mac OS X (10.4.9) iMovie HD 6

Hi Mandi
Two thoughts. Your Mac is struggeling about how to get organized.
- free space on internal hard disk should read more than 10Gb and even
rather like 25GB
- The hard disk that You store Your movie on can be in wrong format
∆ is it formatted OK (if only one = internal it's most probably OK)
∆ external hard disks MUST BE - Mac OS Extended formatted to work
• DOS/UNIX/Mac Exchange - won't do !
- The hard disk can be untidy:
∆ Run: Repair Permissions (Apple Disk Util tool)
∆ Run: Repair Hard disk (Apple Disk Util tool) (You need to start from CD/DVD
or externa hard disk)
∆ AND - delete iMovie pref file (or start a new account / log into this and re-try.
(will do the same but it discards even more eventually faulty files)
Yours Bengt W

When i import movies from my iPhoto app to my iMovie app does it make a copy (thereby using double the hard disk space) or does it link to my iPhoto app? The reason i ask is i want to archive all my videos from iPhoto/iMovie. HELP!

When i import movies from my iPhoto app to my iMovie app does it make a copy (thereby using double the hard disk space) or does it link to my iPhoto app? The reason i ask is i want to archive all my videos from iPhoto/iMovie. Do i need to archive the movies in iPhoto AND iMovie? HELP!

Hi - I'm having the same problem with freeing up space on the HD. If I can't free space if I'm using any part of the clip, how can I split up the clips so that I can discard the part I won't use? This is crazy! I have only 4 GB of free space left!
Also, I've tried to transfer the project file to my external HD but I keep getting an error saying I can't transfer it. I've been told this is because I don't have enough space on the HD for the transfer. I tried a similar transfer with another computer with plenty of HD space but the same error occurred. Is there a way to break up the project file into small pieces for the transfer (I'm thinking the whole movie file is just too big)?
Thanks for any info!

I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.

I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.

Did you rent the movie on your iPad? Are you trying to watch it on your iPad?
Do you have WiFi connectivity when trying to start viewing the movie?
You should have answered "yes" to all the above. If not, that is probably the source of your issue.

Compressor shuts down when I try to load a mov file.

I am trying to make a DVD. I have edited the film in FCP and now want to put it on to DVD but I must use Compressor, the file is about 500meg, about three minutes long. When I set Compressor to do a DVD for me and attempt to load the mov file it closers down with the message as per image. I have the help but to no avail. Is there anyone out there that can put some light on it forme please

Earlier versions of FCP aren't compatible with the newest version of Compressor. From your screen shot, it appears your project is in one of those earlier (and highly coveted) versions. Try exporting a self-contained QT movie from your FCP project and then bring that file into Compressor.
Good luck.
Russ

I received a link to a iTune movie trailer in an email. I clicked on watch now and then play. I was told I need to download Quick Time, but when I clicked on download, I was told that QT is built into Mac OSX. My MacBook has OSX Yosemite.

I received a link to a iTune movie trailer in an email. I clicked on "watch now" and then "play". I was told I need to download Quick Time, but when I clicked on download, I was told that QT is built into Mac OSX. How do I get QT to work?

When I hit the play icon the little arrow thing goes all the way over to the end of the file and doesn't play at all. What gives?
Is this a minimum information puzzle? It is difficult to diagnose a problem long distance when you provide little or no information regarding what actions you are actually taking to export the data or which version of iPhoto you are using. Based on your latest description of how it doesn't work, my best guess is that you are exporting a single frame from your video clip rather than the "Original" file. This is easily checked by opening the file in QT and simply pressing the left/right arrow keys. If the file only contains a single frame, then your export work flow is at fault. Please select the "File > Original" (or similar) option in the export menu to export the entire file in whatever version of iPhoto you are using..

~10s delay when clicking on links before loading begins

I am having a delay of around 10 seconds after clicking on links before loading starts. On some websites it is worse than on others, worst being on reddit.com. I already tried resetting firefox but that didn't help. Thanks in advance for any help.

Did this occur when you didn't have the "Stealthy" extension installed, or does it make any difference if you disable it?
To rule extensions in/out as a potential culprit, you could try surfing for a while in Firefox's Safe Mode. That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Apple TV3 will not load a movie I have rented. When I go to Settings/iTunes store/rented movies it still will not load.

Apple TV3 will not load a movie I have rented. When I go to Settings/iTunes store/rented movies it still will not load.

Thanks, that worked. Much appreciated.
john Galizia

I down loaded two movies to watch on a flight, when I tried two watch either one of them, it said" not authorized for this content" Not sure what this means. I don't think I have child control on.

I Down loaded two movies to watch on a flight. When I tried to watch either one of them it said " not authorized to watch this content" and it would load to watch. I donot believe I have child controls on.

I have read about some cases where movies rented or purchased on one device will not play on another device. Seems to happen mostly with Apple TV and iPads. One way some have worked around it is to cable from the downloaded device to a TV or Apple TV.
Were these movies purchased or rented from iTunes? Not sure, but that almost sounds like a iTunes Password problem. Maybe try checking that you're signed in as the same account that purchased the movies.

When I try to move Movies/TV shows to iTunes, it won't do it. It says "LINK' when I try and move the movies.

I am trying to move TV shows from my computer in to my iTunes. It now says "link" when I try, and I used to be able to move them over with no problem! What do I do?

Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

HT1551 When streaming a movie or tv show it stops after a short time and does not complete the streaming. comes up as an error occurred loading this content try again later

When Streaming a movie or tv show it stops after a short time and does not finish downloading. We watch the TV show or movie than nothing !!!
a message comes up An error occurred loading this content try again later. We have unplugged everything rebooted several times and nothing
helps. It was working fine until we did a upgrade that showed up on the Apple TV.
modle A1427 3rd generation
Any help would be GREATLY appreciated Nothing on regular TV miss my Apple TV stuff !!!!

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Voiding Links when Loading a Movie

Similar Messages

Maybe you are looking for