VPN client can't connect Error message in log is

I_Cookie=E8639EE347B0332A R_Cookie=2E769D3CBD38C09F) reason = DEL_REASON_WE_FAILED_AUTH
What does this mean? How do you fix it?

Thomas
I would interpret this to mean that you failed authentication when you attempted to connect. When you attempt to connect do you get a prompt? If not (and I suspect this is the case) it would indicate a problem in setting up the group authentication in the client. If you do get a prompt then it would indicate a problem with the setup of your ID or password in the server or that you have incorrectly entered ID or password.
Be careful that group name is entered correctly (including upper case or lower case matching).
Be careful that passwords are correctly enterred (including upper case or lower case matching and no trailing blanks).
HTH
Rick

Similar Messages

10.5: VPN clients can't connect to each other

Hey all,
I've got a bit of an odd problem. Got my VPN server setup and working fine on 10.5.4. Clients can connect in, mount file shares, etc. However, if we have multiple clients connected in via VPN, they can't connect to each other. They can't ping each other or anything. I've checked firewalls, etc, on the client machines, and everything looks fine.
Machines within the network can ping and connect to them both, it's just when they're trying to connect to one another that the problem occurs. Any ideas why this might be, and any possible solutions?
Thanks in advance,
Paul

OS X Server / VPN /The L2TP-VPN server did not respond

Can't connect error message -3212

can't connect to itunes store, tried to run diagnosis and itunes freezes, went through all the help options, disabled firewall etc. etc. still can't connect since 3/20th. Any ideas would be greatly appreciated!

Welcome to AD!
That error 3212 usually has the same resolution as error 3221:
http://support.apple.com/kb/TS1485

Can't connect error message

I have tried everything, but for some reason when I open Firefox, I can't access any websites. I can access everything through IE.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
*https://support.mozilla.org/kb/Safe+Mode

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon

Some clients can't connect after 10.6.6 update - the see an error -43

Hi There,
I'm a designer so am not all that technical but have managed to setup and maintain OS X servers since 10.5.
I've just updated the server to 10.6.6 and now some of our clients can't connect - they get the following error:
"There was an error connecting to the server. Check the server name or IP address and try again.
If you are unable to resolve the problem contact your system administrator."
If I click OK to the error above on the client, I see another error which reads:
"The operation cannot be completed because one or more required items cannot be found.
(Error code -43)"
I've restarted the server and the clients but no luck.
The server is running the following services:
- AFP
- DNS
- Firewall
- NFS (although I don't remember setting this up - is this started with AFP?)
- Open Directory
I can ping the server and login via ARD so not sure why we see the first IP address error as mentioned above.
Any help or suggestions would be most welcome.
Regards
Ben

One question, is this when you hit "Connect to Server" or is this after you've established a connection and try to open/edit/save files?
Here is some general advice:
1) I assume your whole network is behind a router and that we are talking a small office environment (5-10 people) and not some large enterprise. If so the Firewall service can probably be disabled. As a matter of fact if your issue is that clients can't connect at all the firewall may actually be causing your problem.
2) NFS can almost certainly be disabled. Its generally only used for two reasons 1) The netboot service needs it. 2) You support unix/bsd clients. I can see from your list of services that netboot isn't something you're doing and I doubt that as a designer you would have much use for unix/bsd systems.

TS3988 I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?

I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

AnyConnect Secure Mobility Client v3.1.04066 "The VPN client driver encountered an error"

Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
For information, this is the message history when I try to connect:
[12/8/2014 8:55:49 AM] Ready to connect.
[12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
[12/8/2014 9:27:22 AM] Please enter your username and password.
[12/8/2014 9:27:29 AM] User credentials entered.
[12/8/2014 9:27:30 AM] Please respond to banner.
[12/8/2014 9:27:31 AM] User accepted banner.
[12/8/2014 9:27:31 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Checking for profile updates...
[12/8/2014 9:27:32 AM] Checking for product updates...
[12/8/2014 9:27:32 AM] Checking for customization updates...
[12/8/2014 9:27:32 AM] Performing any required updates...
[12/8/2014 9:27:32 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
[12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
[12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
[12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
[12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
[12/8/2014 9:28:22 AM] Connection attempt has failed.
[12/8/2014 9:28:24 AM] Ready to connect.
I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
-TheJayDude

Yes, I am sorry to say that several people have seen the same issue. It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things. The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up. We re-added the default route manually which allows us to ping the servers and even access them via the IP address
Run the command below before starting the VPN to get the default route
netstat -nr | grep default
Then run the following to re-add the default route.
route add default xxx.xxx.xxx.xxx
BUT there is no way that I can find to fix the DNS entry.
We tried re-adding the DNS entries in the /var/run/resolv.conf and then restarting the DNS service
$ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
Password:
$ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
BUT THIS DOES NOT WORK!
If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
Here is a link to the same issue at Cisco.
https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac

Server 2003 VPN clients can't verify username and password

Hi,
Hoping someone can help or point me in the right direction. I have a Windows Server 2003 R2 standard SP2 running RRAS. It has Dual NIC's and is configured for PPTP VPN. I am using a BT Business Hub 5 for internet access and using the BT Static IP service.
The BT Hub assigns the static IP address chosen to the Server using DHCP. The firewall is configured to port forward PPTP traffic to the 2003 server. This all works correctly.
The 2003 server is on a domain where the DC is a 2008 R2 server. The DC also acts as the DNS and DHCP for the network.
The default gateway for the domain is pointed towards our WinGate proxy server which also acts as a DNS server.
The 2003 server LAN NIC is configured manually, usually I would not configure a deafult gateway on the LAN NIC as the WAN NIC needs the default gateway for the BT Hub.
The problem I am having is if a default gateway is configured on the LAN NIC, I can connect to the VPN and it will logon to the network. Once connected everything works ok. If the connection drops, when trying to reconnect the client can no longer verify
the user name and password against the domain and the connection is refused.
If I do not have a default gateway configured in the LAN NIC the VPN clients can not verify the username and password for the domain at all and I get RPC failure errors in the event viewer with the source dnsapi.
Once this error occurs the only way I can get the clients to reconnect is to disable the WAN NIC, restart the RRAS service and enable the WAN NIC again.
Any insight will be much appreciated.

Hello,
for Networking configuration questions better ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserverNIS&filter=alltypes&sort=lastpostdesc&content=Search
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Vpn client can access internet but cannot access internal network

I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....

enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

SBS2008 VPN Clients can't Remote Desktop to PCs

Hello,
I have a network running SBS2008, it has RRAS configured on it and clients connect to it fine. However, while connected to the VPN, I can't connect to PC Clients via RDP. I connect to server via RDP no problem. And I can connect
to PCs via RDP from the server or other PCs on the network. I just can't connect through a VPN connection. RRAS uses DHCP from the server to assign IPs so VPN clients are on the same subnet as the domain PCs.
RWW also works fine for connecting to PCs, but we would like to be able to connect via VPN as well. And it should work, I can ping a PC I'm trying to connect to over the VPN connection, no problem. I researched and saw something about the group
policy, but this is a very small network and doesn't really use that. I made the changes described in the Windows Firewall settings but it made no difference. I also went and turned off the Windows firewall on the PC I was trying to connect to,
but it still didn't make a difference. Is there any other reason this wouldn't work?
Thanks

I found out that the issue was caused by the Symantec Endpoint Protection client installed on the server. It was blocking traffic between VPN clients and PCs on the network. I just reconfigured it to allow that traffic and it worked
fine afterward.
Hi Rayminette,
Glad to hear that you have solved this issue and thanks for sharing your solution in the forum. Your time and efforts are highly appreciated.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

VPN Clients can't access internal LAN

Hello - I have seen a few other threads on this issue, but can't seem to fix mine. I have a PIX 506e. My VPN clients can connect, they get a DHCP address from our internal server no problem. But the clients can not ping me or anything else on the LAN. The clients are connecting ipsec. I know I must be missing something simple here. Here is my config. Any help would be great

Change the VPN Pool address to something else for example 192.168.10.0/24 etc. Then try and let me know. There could be ip overlap here.

VPN clients can't see network resources unless Firewall is disabled.

If the firewall is turned off, connected VPN clients can access other PCs over the VPN. But I would like to enable a rule that allows them to access computers even with the firewall turned on. I just don't know what the rule should be.

Hi,
Any update? If you could update us at your convenience that would be wonderful.
Regards
Yolanda Zhu
TechNet Community Support

Can see my machine through vpn, but can't connect...

Hello all,
On 10.8.1 with ARD 3.6.1 at home-Mac MIni Server.
Connected through a VPN (Cisco IPSec) to my office.
I can see my work station at work (10.8.1, ARD 3.6), but I CAN'T connect.
Message I get is: Make sure remote management is enabled in sharing (it is) or that your network interface is working (it is).
I can see my other stations at work with ARD 3.5.1 through 3.5.2 with 10.7 and I can connect to those with no problems.
And I can connect from my laptop (10.8.1, ARD 3.6) at home to my this mac mini server and vice versa.
Does anyone know why I can't connect to the one at work? something with the VPN, seems like the only variable here.
Thanks,
Brian

problem solved.
I couldn't reinstall it because I had an older version. After installing the old version and upon launch, it will say that an newer version is already installed... blah... blah...
Apparently, ARD is a part of the mountain lion and it is not easily removed. So don't try, I followed apple tech support doc and it didn't work.
What I had to do was to restore the newest version, cause I deleted it, but this time I aslo deleted all the system files related to the ARD and the pref, plist, etc.
This time I launched 3.6 again, set the pref, and I was able to connect from my home computer to my work computer.
Success!!
Thank you for the assist.

VPN client can't connect Error message in log is

Similar Messages

Maybe you are looking for