WAAS and NAM 4.2 Reporting

hey folks,
I recently went through the upgrade process with a customer to move their NAMs to 4.2 and integrate WAAS 4.0.15 with the NAMs via the flow agent. We followed the NAM integration guide and setup some reporting in the NAM for collecting information from the WAAS flow agents on bandwidth and response time. However, at this point, the information that we seem to be getting is limited. I am finding the reports in the WAAS GUI itself to be more valuable at this time, however, I have heard from several engineers since this integration has been available that NAM and WAAS are a good fit. Does anyone have any specific reports that they can point me towards in the NAM? Right now I have setup some Application optimization specific reports in the WAAS CM for HTTP and CIFS. What I would like to do is use the NAM to validate those reports and provide some upper management level visibility into specific flows to specific servers and how effective WAAS has been in optimizing that traffic. This customer is about to deploy WAAS worldwide and having some more detailed reporting capability would be very helpful.
Does anyone on the list have any good experience with NAM 4.2 and WAAS that they can share and some how to's on what reports they are finding the most valuable to their senior managers and IT staff? Thanks
Sincerely
Mike Louis

Hi Mike,
This webinar on Jan 12; might be of interest to you.
You can register via this URL.
     https://ciscosales.webex.com/ciscosales/onstage/g.php?d=201229605&t=a
I also attached a document that might help as well - Using NAM Hardware in a WAAS POC and Depoloyment.
Thanks
Eric - please mark as answered with a rating of 5, if this answered your questions.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Leverage Cisco Network Analysis   Module to enhance operational visibility into WAAS deployments. NAM   reports on a comprehensive set of application performance metrics such as   application response time, WAN bandwidth usage, LAN and WAN data throughput,   and other application performance metrics to:
Identify        application optimization opportunities
Analyze        impact of Cisco WAAS implementation
§ Take advantage of visibility for ongoing    optimization improvements and troubleshooting
Cisco NAM   4.1 also introduces the first software only version of the NAM as a Virtual   Blade on the WAVE 574 and WAE 674.
If you have ever felt overwhelmed   trying to answer the following questions:
·         How do I verify the impact of WAAS on   application performance at my remote offices?
·         How do I get the level of visibility needed   for effective operational manageability?
·         Is there a monitoring solution that is   integrated and does not demand additional footprint?
·         Is there a solution that provides visibility   across the entire WAAS deployment lifecycle?
Please join us for a webinar of   the Cisco NAM 4.1 that explores the performance management and   troubleshooting capabilities of NAM hardware and NAM VB in a WAAS environment   to help address the above questions and more.
WEBINAR Dates and Times:
REGISTER January 12th, 2010 Tuesday at 8:00 - 9:00 AM PST/11:00-12:00 EST
Agenda:
·         Overview of NAM and NAM VB
·         Setting up NAM for WAAS analysis
·         Use of NAM for WAAS before-and-after impact   analysis
·         Use of NAM to improve manageability and   troubleshooting of WAAS
·         Q&A
NOTE – Once you have   registered for the webinar, you will get a WebEx message with outlook ics   file.
Please   click on the .ics file when you get your message from WebEx to make sure it   is placed on your Outlook Calendar.
© 2010 Cisco Systems, Inc. All rights   reserved. Privacy Statement and Trademarks of Cisco Systems, Inc

Similar Messages

Define Logical Systems and Template Names for BW Reports

Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
Javier

Hello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan

Displaying current user's first and last name on a report.

I would like to dispay the current user's name on a report. I've tried using User() and NQ_SESSION current user .
These two options display the User ID (i.e. User name is Jon Smith. there ID is COMP/JSMITH.
Using the two methods above the ID (COMP/JSMITH) is displayed. Is there a way I could display Jon Smith?
I thought their might be a way to use Full Name or First and Last Name.
Message was edited by:
user618827

VALUEOF(NQ_SESSION.DISPLAYNAME) will do the trick
Mike L

How to get report Server Name and Environment ID in Report

How to print report Server Name and Environment ID in Report 10G.(Through in package or others)
I'm also using Oracle Application Server 10G.

Hi,
Server and envid are the parameters passed along with Reports URL call.
These variables value can be traped in Report by defining SERVER , ENVID named user parameters.
Once trapped, can be printed on Report.
Just ensure that these users parameters are not exposed to Parameter page, otherwise user may end up changing it.
Thanks

How do I find the report server name, and then run paper report from forms?

How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.

Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank

Do we have a feature of export the names of the reports and dashboards that are available in OBIEE?

Is there any option to export the names of the reports and dashboards that are available in OBIEE?

Hi,
You can create report using catalog manager:
1. Open catalog in Online mode.
2. Select shared folder & then click on Tool-> create report.
3. For report name -> select Analysis from drop down list & move "Name" in right pane(or whatever detail u want, u can select from list).
4. For Dashboard -> select Dashboard from drop down list & then move name in right pane.
5. Click OK & save report.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Header and Footer in BEX reporting

Hai friends,
     could you plz tell me how to add Header and Footer in Bex report.. that means.. i want some my company name and address should print on the top of the report..
and also.. in the Footer. i want to display the Number of records are selected...
Ex :
   XYZ ORGANIZATION
   #301, ITPL,
   BANGALORE.
4 Records are selected
so, plz give me the solution .... how to   design a query with this requirement
thanks
with regards
@jay

Hi Ajay,
Refer to web tempaltes 0adhoc_header and 0adhoc_Footer , by changing this you should be able to display header and footer for each query out of BW server.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Getting the variant name when the report program is run in background

Hi All,
How to get the variant name for the report program when run in background? My requirement is to create an email attachement with the name 'variant.XLS', where variant = selection screen variant, when the report program is run in background. The system field SY-SLSET holds the variant name only when run online.
Any pointers to this will be highly appreciated.
Thanks and regards,
Nilesh.

Hello Nilesh,
Please find the algo:
1. Call the FM: GET_JOB_RUNTIME_INFO to get the background job details.
2. Select data from TBTCP using these details:
DATA:
FP_EVENTID   TYPE BTCEVENTID
FP_EVTPARM   TYPE BTCEVTPARM
FP_ACTIVE    TYPE BTCXPGFLAG
FP_JOBCNT    TYPE BTCJOBCNT
FP_JOBNM     TYPE BTCJOB
FP_STEPCNT   TYPE BTCSTEPCNT.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
    IMPORTING
      EVENTID                 = FP_EVENTID
      EVENTPARM               = FP_EVTPARM
      EXTERNAL_PROGRAM_ACTIVE = FP_ACTIVE
      JOBCOUNT                = FP_JOBCNT
      JOBNAME                 = FP_JOBNM
      STEPCOUNT               = FP_STEPCNT
    EXCEPTIONS
      NO_RUNTIME_INFO         = 1
      OTHERS                  = 2.
IF SY-SUBRC <> 0.
*   Error calling FM: GET_JOB_RUNTIME_INFO
ENDIF.
DATA: FP_VARIANT TYPE BTCVARIANT.
SELECT JOBNAME JOBCOUNT STEPCOUNT VARIANT
FROM   TBTCP
INTO TABLE L_IT_TBTCP
WHERE JOBNAME   = FP_JOBNM
AND    JOBCOUNT = FP_JOBCNT
AND    STEPCOUNT = FP_STEPCNT.
IF SY-SUBRC = 0.
    SORT L_IT_TBTCP BY JOBNM JOBCNT STEPCNT.
    READ TABLE L_IT_TBTCP INTO L_WA_TBTCP INDEX 1.
    IF SY-SUBRC = 0.
      FP_VARIANT = L_WA_TBTCP-VARIANT.
    ENDIF.
ENDIF.
Hope this helps.
BR,
Suhas

Project Server 2010 - Modification date and name of the person who made the last change in the project

Hello everybody
I'm with a doubt.
I got in the business
environment Project Server 2010 and
would like to get the publication date,modification
date and name
of the person who made
the last change in
the project. It is possible
to doby the native
resources or is
there any query in
SQL Server to perform a
query of this information.
Thank you.
Obrigado por contactar o fórum Microsoft Technet!

Hi Hezequias,
You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
get the data based on the projectUID.
The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
For the "last modified by", I think it is not stored in any place.
But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
date and username automatically into a custom enterprise field.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Preview and print a Crystal report prompted for the sa password

Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
Yuka

Hi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don

Changing Step Name in XML Report programmaticaly

I am trying to change the step name programmaticaly in TestStand to reflect in the XML report. The step is executed several times in a loop, and every time the loop runs I want the step to be named differently in the XML report. For example, the names will be something like this < Test1: Signal Name 1>, <Test2: Signal Name 2> ....etc. Any help on this will be appreciated .
Thanks,
Sam

Hi,
The best time to change the name is before you perform the test, then it will get inserted in the ResultList and hence into your report.
I have attached one way of doing this. You can also perform it after the Step you wish to change, in which case you would use the RunState.PreviousStep as a reference.
You could call the API method as part of your code.
Remeber, if you use a PropertyLoader to load Limits, and you have placed this inside the loop, then your Limits file for the Step Name must match the new step name not the old one that you see statically.
This is a TS3.5 example.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
Sequence File1.seq ‏25 KB

File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

I need to create a fillable form and then generate a reports.

Hello everybody. I need to create a fillable form and then generate a report using numbers. You know, for example if you have customers, I need to be able to write the usual , name, last name, address, and some other details and then using a standard letter I would like the form to be able to populate these fields automatically in a standard pre formatted letter by our company and then be able to print it.
Any help to point me in the right direction I would appretiate very much.
I have iwork 9 installed in my macbook pro

This is acalled a mail merge and is solved using a combination of Numbers (or address book) and Pages. To get detailed help how to performa a mail merge start in Pages, then in the help menu type Mail Merge:
Also download the help files for Numbers and Pages here:
http://support.apple.com/manuals/#
Page 247 in the Pages User's Guide has details how to perform a a mail merge.
Post back with specific questions if you need to.
Regards,
Wayne

How do I find out what the name of the reports server is?

Hi Everyone,
I am connecting to a remote machine using gotomypc.com and have started up Reports Builder 10g. I know very little about installation of Oracle on this machine. Just enough to log into Oracle 10g and run tools like the Report Builder, TOAD, etc. When I run a report from the Report Builder I get a web browser with a blank report. It works when I run a paper report. I am guessing that the Reports Server is not running or not configured properly.
Can you tell me how to find out what the name of this Reports Server is and/or how to start it up?
Thanks.
Emad

I realize this is old, but... You can find out your servers name by looking at the $ORACLE_HOME\reports\conf\rwservlet.properties file. It has a entry for SERVER. Should also have a corresponding conf file after starting up OC4J and activating the server for developer installs.
Next, you can also run rwdiag. It will show you all report servers available to your installation. This is interesting when Multicast is used by Reports (10g). Ran into issues with servers named the same not on the hardware I was expecting.... ;)
Good luck.
BradW

WAAS and NAM 4.2 Reporting

Similar Messages

Maybe you are looking for