WAD 3.5 - Pass a date to Hierarchical Filter Selection Key Date

I'm working in WAD 3.5, with 3.5 queries.  I currently have a Hierarchical Filter Selection on Org Unit using a query with no Key Date set, so as to pull the most current version of the hierarchy.  This filter selection is then applied to several charts and tables below. 
I need the web app to initially display this current version, but also allow the user to select a date, which triggers a requery of the Hierarchical Filter Selection data provider, passing the date selection to the key date of the data provider query.  1) how do I pass the date (currently from a drop down) to the key date of the other query, and 2) how do I force a requery of the Hierarchical Filter Selection?
The problem we are attempting to address is that if Org Unit A contained Org Units 1, 2, and 3 at the end of 2007, but only 1 and 2 today, the Hierarchical Filter Selection will not show #3, thus not allowing the user to drill down to it.  If they can choose the version/point in time of the hierarchy, they will then have the ability to drill down on the older Org Units.
Thanks!
Anna
Edited by: Anna Kamrath on Feb 6, 2009 8:52 AM

Our solution was to modify the user exit variables and store the values in a MEMORY ID and restore from there.

Similar Messages

  • Hierarchical Filter Selection display selection

    I am building a web report which uses Hierarchical Filter Selection on Brand to filter data as per brands. When I select a hierarchy node the data in the table gets filtered but the chosen filter value is not displayed in the Hierarchical Filter Selection control textbox.
    How can I make that to display ?
    Points guranteed...

    Hi Jonathan,
    Please find the below SAP notes which are very similar to your issue...
    SAP Note Number: 1119186:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313139313836%7d
    SAP Note Number: 1047455:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303437343535%7d
    SAP Note Number: 1119185:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313139313835%7d
    SAP Note Number: 1076125:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303736313235%7d
    Hope these helps u...
    Regards,
    KK.

  • Select key date of time-dependent hierarchy before select a hierarchy node

    Hello experts!
    I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
    Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
    Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
    Thanks for help!
    Peter

    Hey!
    You don't have to use the same presentation-hierarchy like  the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
    This solution works for our problem, maybe not for yours, don't know.
    Best regards,
    Peter

  • Filtering of the data based upon the selection screen data using ldb

    Hi Experts ,
    I am using ldb pnpce, for my report ,and i created my own report category with selection paramaters
    action type and payroll area
    now the problem is when i am giving the action type as Z0 ,the data to be extracted is not getting filtered
    based upon the action type ,the data consists the records having different action types other than Z0
    Please give me some solution for this

    Thanks Durga ,but the link wat ever u was for hiding the selection screen fields
    but my question is when am using get pernr event my data is not getting filtered with the selection screen paramater value
    i,e m giving action type as only hiring ,but m getting the data for all the action types ,its not filtering based upon my selection

  • How to hide one block of data based on Filter selections

    Hi,
    I have a requirement where I should show only one block based of filter selections provided at the Query Level.
    How can I achieve that?
    Regards
    Shirley

    Lets say you have a optional filter and you want to show block 1 if value are inserted and block 2 if no value selected.
    For this You can create a variable status =IsPromptAnswered("") it will return 1 if prompt is answered.
    In block property go to the hide if below formula is correct and for block 1 give   status =1 and block 2 give status=0
    I hope this will help.

  • Wad - Collapse Hierarchical filter

    Hi all
    I am using wad v 3.5.  I have a problem with Hierarchical filter selections.  If a user clicks and opens the filter display and then moves the mouse off of the filter they want the filter to collapse back to its original status.  Currently the filter remains open and blocks some data on them.
    Does anyone know some javascript or code that will collapse the filter when the user moves the cursor of of the filter.
    Thanks
    Darren

    Anyone.
    Is it possible to do this in the javascript for the Hierarchy ?

  • Stock Report on Key date.

    Hi,
    I want to have a report which gives stock available on key dates. Is there any standard report available in sap.
    Thanks in advance
    VRH

    HI,
    Using T-code MB5B - Stock on Posting Date, the following input data to be given as follows.
    Company Code : ______
    Plant : _______
    Storage Location : ______ if required to be selected
    Selection Date : _________ to ___________ (Your key date from 01.10.2010 to 31.10.2010-report required period to be mentioned)
    Stock Type - selected Valuated Stock
    List of Scope click category and following options to be tick marked
    With Opening Stock Without Closing Stock
    With Opening Stock With Closing Stock, Changed
    With Opening Stock With Closing Stock, Unchanged
    Settings - Totals Only - Non Hierarchical Representation Layout /ZMB5B tick marked
    The above input data given & options are tick marked, Executed the report shown opening, Receipt,Issues,Closing stock, UOM, Opening value, Receipt Value, Issue Value, Closing Value, Currency in columnar (like Excel tabular format).
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Looooong text in hierarchical filter after SP15

    Hello,
    We discovered a problem after upgrading our BI-servers to SP15 (from 13). When we use hierchical filters in WAD the text description of each leafenode includes all the attributes. This results in an extremely broad hierchical filter.
    Has anyone experienced this, and if so, is there a fix on it?
    Best regards,
    Kristian

    Hi Kristian.
    We have the same problem. We opened a message similar. Search for
    "Problem with the view of an hierarchical filter selection". We were told to check note 1144979, but our client system deptm didn't apply the note.
    Maybe it will help you.
    Please, if you can apply it, tell us if it solves the problem
    Best regards

  • AP Aging report - key date for user entry

    Hi All,
    We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
    I know the key date for this report is created on net due date in SAP standard report.
    In standard SAP report , key date is always a system date(SY-DATUM).
    What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
    If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
    Can  someone Pls tell me if aging buckets are calculated based on a user entry ?
    Regards,
    Kumar

    Hi Voodi,
    Aging in the standard report is being calculated like below...
    1.For open items
    Posting date<key date
    Item status = O
    2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
    in this scenarion , key date is always system date ie today's date.
    But user wants to get all the invoices based on his user entry...
    is this possible with the same standard key date variable or do we need implement any other logic???
    Regards,
    Kumar

  • G/L account key date

    Hi Experts,
            I need to generte a report for open items in the G/L account , based on the 
    <b>key date field..</b>
    please guide me.. from which table i need to retrieve the data.
    Not based on posting date or document date.. it should be key date
    input parameters are : company code,
                                      house bank,
                                      key date.
    Thanks in Advance,
    Regards,
    Sabari.

    Hi Sabari,
           All the G/L accounts transaction details u can see the tables.
              BKPF : - Accounting Document header table.
              BSEG: - Accounting Document  Item table.
              BSIS - G/L Accounts
    Check the table BSIS.
    Hope its useful for you.
    Thanks and regards
    Nisar.

  • How to display null values in the graphs, when i select a date range?

    Hi,
    Can you please help me in achieving the below requirement:
    We have a date promt, i have selected the date range from 12-Oct-2009 to 15-Oct-2009 and clicked on the go button.
    In the above date range, data is only availabe on 14-Oct-2009. here the requirement is to display as all the records (12th, 13th , 14th & 15th) in the bar graph.
    Currently the graph view is displaying the data only for 14-Oct-2009 in the bar graph.
    If data is not available it should display in the bar graph as empty for that particular dates.
    Help is highly apprieciated.
    Thanks in Advance.

    Check out [this post|http://obiee101.blogspot.com/2009/04/obiee-showing-zero-in-bargraph.html].

  • How to get open items as on a key date

    Hi experts,
    I want to show a report Agewise report of offsets: 0-30, 30-60,....
    Only the open items of Vendor as on a particular key date to be considered...
    How to get the open items as on a particular key date ?
    Regards,
    Rao.

    Hi All,
    Thanks for the reply..
    ==============================================================
    Basically create one ckf and two rkfs for each aging bucket
    ie ckf 0-30 days = rkf 0-30 days open + rkf 0-30 days subsequently cleared
    Because you need to restate the AP report to a key date - some items have changed their status since that key date but were open at the key date (ie we call those subsequently cleared)
    so rkf 0-30 days open is
    posting date <= key date
    item status = O
    net due date between variable date (cmod which reads key date) offset 0 and variable date (cmod which reads key date) offset -30
    rkf 0-30 days subsequently cleared is
    posting date <= key date
    cleared date > variable date (which reads cmod of key date)
    net due date between variable date (cmod which reads key date) offset 0 and variable date (cmod which reads key date) offset -30
    ========================================================================
    In the above two cases, while creating restricted key figures how to design this;
    net due date between variable date (cmod which reads key date) offset 0 and variable date (cmod which reads key date) offset -30
    And also after creation of two rkfs i created a ckf i.e ckf = rkf1+rkf2.
    Now i dragged this ckf into columns and when i checked the query it is giving error that key date variable is used more than once. ( Bcz we have used key date variable both in rkf1 and rkf2 for getting posting date <= to key date )
    What is the solution for this ?
    Regards,
    Rao.

  • SAP BW Hiearchy Key Date Variables - Web Intelligence

    Hi,
    I have couple of issues / scenarios which are not working as expected. First, as I understand that hiearchy variables are supported by WebI.
    Scenario 1
    I have created a hiearchy key date variable within the report and made it optional. I run the report an no key date appears. It should appear. If I then make the hiearchy key date to mandatory I get a database error. Looks like there is a problem with hierarchy key date variables?
    Scenario 2.
    I change the hierarchy key date so it uses the key date of the query (so no longer a variable).
    As an example,I have employee "Employee X" assigned to "team A." This team moves from the Desktop team to the IT team on the 01.04.2011.
    IT
       A - 01.04.2011 -> 31.12.9999
    Desktop
       A - 01.01.2011 -> 31.03.2011
    I have a hiearchy variable so I can select a team as requied (using the object 0ORGUNIT) If I run the report using the key date 01.04.2011 the WebI report displays the current hierarchy nodes i.e.
    IT
       A
    and the data shows correctly,
    If I now re-run the report using the key date 01.03.2011 in the selection screen in the WebI report the following is still shown
    IT
       A
    If I select team A - no data is displayed. So it looks like via the use of the "Use query key date" for the hierarchy key date works but not in selection screen which is a problem.
    Is this a bug or am I doing something wrong?
    Thanks

    Hi,
    I have now got scenario 2 working - well I didnt do anything apart from run it InfoView and it is fine. But for some reason does not work in WebI Rich client - I will have a look into this furrher but am happy that it works in infoview. Sceanrio 1 is no working still I have run it in InfoView and get the error "A database error occured. The database error text is: Failed to execute MDX query. Reason: Specify a value for variable Hierarchy Key Date. (WIS 10901)" This hiearchy key date is th variable which I have created and assigend to the hiearchy so that a "hierarchy date" can be selected.
    +Scenario 1+
    +I have created a hiearchy key date variable within the report and made it optional. I run the report an no key date appears. It should appear. If I then make the hiearchy key date to mandatory I get a database error. Looks like there is a problem with hierarchy key date variables?+
    Any help is appreciated.
    Thanks.
    Edited by: Leo on Apr 25, 2011 4:20 PM

  • Posting date  = Key date

    hi all,
    i am a beginner to sap bw, and learning FI AR.  for the 0FIAR_c03_q005 query, they use the posting date <= Key date. I didn't understand the meaning of posting date and key date.
    can you help me?
    thanks

    SKB
    Check this for more info on Key date
    Key Date
    Each query has a key date. For time-dependent data, the key date determines the time for which the data is selected. The default key date value is the date on which the query is executed, that is <Today>.
           1.      Choose  . The Date Selection dialog box appears.
           2.      Choose a date from the calendar and use the arrow button to add it to the selection window on the right. If you select 01.01.1999 for example, time-dependent data is read up to 01.01.1999.
           3.      Choose OK.
    You can also select a variable key date:
           1.      In the Date Selection dialog box, choose the Variables tab page.
           2.      Choose a variable and use the arrow button to add it to the selection window on the right.
    In the selection, you may need to know the technical names of the queries as well as their descriptions. In the Description window on the left hand side, choose Technical Names from the context menu (secondary mouse click).
    If you want to create a new variable, in the Description window on the left-hand side, choose New Variables from the context menu (secondary mouse click). The Variable Wizard dialog box appears, where you can create new variables .
    If you want to change a variable, in the Description window on the left-hand side, select the variable and choose Change Variable from the context menu (secondary mouse click). The Variable Editor dialog box appears, where you can change variables .
           3.      Choose OK.
    The key date only applies to time-dependent master data.
    Hope this helps
    Thnaks
    Sat

  • F.31 Open at key date

    Hi Guru's
    I have an issue with F.31
    The following are the selection field
    Credit Account
    Credit control Area
    checkbox checked for Overview list with Navigation
    Check box checked for Balance
    Check box checked for Special GL Balance
    Checked Dunning Area
    Selected Days in arrears X
    selected Open items
    Selected Intervals as Z02n (customized)
    Entered Open at Key date
    My issue is when I generated report it is defaulting to the current date rather the date mentioned in Open at Key date
    Can you please let me know why?

    Hi,
    What you mentioned option do it  (Before Executing ) Select the Save button.
    Give the Variant Name & Meaning Text.
    If any settings look the Object for Selection fields.
    Save the Varient.
    When you are executing the report Select the Get Varient Button beside the execute button.
    Select the Varient and Execute.
    OR
    Select the Lay out button and configure as you Require.
    OR
    Develop the New Report with ABAP'rs.
    Regards,
    Kishore K

Maybe you are looking for

  • HP Laserjet 1018, Word 2007 on Windows XP - Duplex printing alignment

    HP Laserjet 1018, Word 2007 on Windows XP Want to Print a book on both sides of A4 paper. I am printing one page per page (not the book mode). If I print single sided, the top of the page (e.g. header text) on odd and even pages are aligned. When I p

  • What's wrong with "Post-Change" anyway?

    Post-change has been fading out since Forms 4.5 (maybe earlier). We are now supposed to use "WHEN-VALIDATE_ITEM" AND "POST-QUERY" to do the same job. Our company uses Post-change a lot to complete description fields (example: "Unit Description" for t

  • Iphoto won't import video from Canon S5 IS

    I bought a new Canon S5 IS camera and took some great pictures and video. The photos will import into iPhoto just fine. The videos imported fine at first (I have a few from the first time I used the camera) but now the videos won't import. In fact, I

  • Am i offline??

    Is it normal that I have to reconnect to the wifi network every couple of minutes of inactivity(like 5 mins). I could not open a website everytime, like I'm disconnected or "offline" until I have to disconnect and reconnect again to the network. Only

  • Flash 8 Video Encoder, audio/video discrepancy from mpeg

    Two questions... First, more urgently, I've been given an origianl 720xsomething mpeg format video, and I'm trying to bring it over to flash... I use the flash 8 video encoder, which does a phenomenal job of keeping video quality while vastly reducin