Walking-One / POST Failure

Hi All,
Apologies if this is the wrong area for this, and please feel free to relocate.
I have a faulty 3750 at work that was given to me. It's RMA is expired. When booting, I get the following:
TCAM (asic:0) walking-one test failed
Write: 80_00400000_00000000-00_00000000_00000000
Read: 80_00000000_00000000-00_00000000_00000000
HTD POST: Walking Ones Test Failed
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed
POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP
driver class subsystem initialization failed
!!! WARNING: The switch is not usable !!!
It appears that the main problem is that it doesn't think it has any interfaces installed.
Switch#show run
Building configuration...
Current configuration : 563 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
hostname Switch
boot-start-marker
boot-end-marker
no aaa new-model
port-channel load-balance src-dst-ip
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip classless
ip http server
ip http secure-server
no cdp run
control-plane
line con 0
line vty 5 15
end
I would love to have a working 3750 for my home lab, so is there anything I can do to fix it, other than trashing it considering it's no longer under warranty?

Nope, it's dead.

Similar Messages

Can I group several questions into one post? I guess I will find out...

Hello!
I am new to this area of apple.com, but it looks like I should have been here a long time ago. Maybe I posted one post before I made the big purchase but all the problems I have had, this should be number 1 on my list. so far this might have ben able to take the place of appleCare?
I have had the MBP for about 4 months. I honestly am not too impressed yet, but it could be my own fault. Putting that aside I will ask my questions after telling you about my system and hopefully I can start feeling a bit better with this machine. it is a MacBook Pro that was made in 2007, the date on the notebook was 1 week before '08 iLife was released. I found out I did get the faster HD I payed for after calling AppleCare 3 times and finally just putting in the HD serial number and it took me to places that sell the HD and that is how I found out I did indeed get the faster HD. so it has the Intel Core2Duo, 2.4 GHz processor, V 10.4.10 (which I could swear last I looked it was 10.4.9 but AppleCare said I would have to know if the OS was updated.
I did add 2 2gb sticks of RAM, so I have he initial sticks that came with the machine. This leads me to my first question:
1. Is trying to sell the 2, 1 GB of RAM that came with the machine an OK thing to do? I did get the 2, 2GB sticks at an Apple store that is certified with Apple and an authorized store for Apple that can perform AppleCare-certified work. So I did not just bring it in to anybody because I was nervous doing the add-on in case the notebook needed to go into AppleCare.
Is it an OK thing to try and sell the RAM? it seems like such a waste and was a drag I had to purchase 2 new sticks of RAM in the first place. I am also wondering where there "667 MHz DDR2 SDRAM" what does the 667 MHz mean? is this a speed or something I should have paid more attention to when I purchased the new RAM?
2. My second question is if I am posting this question in the right area. is the OS I have called Tiger? When dos it end being Tiger? When the next OS comes out? Also, I think the next OS upgrade will not be free, right? is it worth getting?
3. When I first searched, and asked and searched, and asked and read and spent 8 months trying to decide what notebook I wanted to purchase, I used the chat on applestore.com. In fact when I decide to make the purchase I did it through the chat and at that time I still had not made up my mind on a couple questions about products.
I was "sold" the Extreme Base Station when I learn that I actually ned the Express one to play iTunes over my stereo. I was quite upset because I feel I was misled in many areas with this being one.
the express Base Station is nice but looks like it is for a call center or some other area that has many computers. Is this something that I should be able to sell, along with my RAM, at the same place? I am not sending it back to Apple for several reasons but now because it is too late and they charge too much to restock it.
4. Is there a brand of printers that work better with a MacBookPro? I have the 3rd all-in-one HP Photosmart (not all were Photosmart, but were all-in-one) and each one I am unable to get to work with the Extreme Base Station. made this clear with the online sales guy that I needed the router that played the iTunes over my stereo, about 2 ethernet ports, a printer port (USB or Ethernet), and potable. Well i was not given honest info because the Extreme is not the one I needed. I really ant to know if there is a site someone would recommend I post the RAM, Extreme Base Station, the Neoprene Incase sleeve (that scratches the MBP when I slide it in?
5. I am not impressed with this machine at all. the quality is so-so, not as good as I kept hearing. I know I will have some hardcore apple fanatics come down on me but maybe I can get some advice after they all get to vent. is the top "lid" of the notebook suppose to be so unstable when it is closed? if I press on the left side, the right side opens up about 1" or a slight bit more. and then press the right side and the lt side pops up? When the notebook is closed there is not a nice "tight" close to the machine. This appears to be a quality thing but maybe it means nothing. I would like a tighter seal so that dirt, dust, etc in the keypad area when I travel but I am more concerned that it may be a defect. I know I can bring it in to an apple store but being disabled makes it tough to get close t the only apple store in salt lake City.
6. Finally, i cannot get use to what programs or applications, are on the machine and able to be used without paying for them. is there a free program or something in Preferences that I can paste to the desktop that will tell me what the applications are basically for and which ones are already purchased or able to be used without paying for them. I find myself not use the notebook like I should because I think that what is in the dock is what is in the notebook. But apparently that is not the case. I have found something that lists some applications and it is called applications, imagine that, but it is not inclusive nor does it give a brief explanation what the program is for.
7. I lied. One more. I purchased Fusion but have not done anything with it except send in the rebate. I would like to use the XP that was on my previous notebook that died. Does anybody have any info on this program, good or bad? I still keep hearing about Boot-Camp and Parallels, but not VM Fusion. I would have thought this program would have taken off like a wildfire when I initially read up on it and learned the company's specialty who put it together, what it can do, etc. I do not have very good luck, if that is OK to say, with installing programs, especially a program that will need me to instal an OS over that in-order to se if it works.
I appreciate any informative information I get. thanks for being patient with me.
KJT

Hello-
I was curious about what you said you are installing, 2 gb 1000mhz each? correct? So tha made me investigate further wheree i purchased my 2gb sticks 600 mzh (or whaever the abbreviation is.)
Not only did I find out 8 days later that the price for what I paid $..shoot, I can't remember right now how much this certified apple store sold the 2 gb sticks to me but they were 1/2 the price the day I called to ask about the 600 vs the 1000 you mentioned. they are not an apple store but they are a certified reseller, or something like that.
They would NOT give me any refund. But I asked them about the sped since you had mentioned what you were installing. They said for the MBP, the AM only comes in one speed and is different depending which Mac a person has. this guy said they only will tak max 2 gb sticks with a speed of 667. so I am confused about that and ****** about how they ripped me of and Apple will not help me. they get a free spot on the only Apple Store's box in the Yellow Pages too, for some reason
If som bodu can explain this to me, I would really appreciate it. will even mark the question as answered if ou are somewhat nice abou it.

Where does one post ......

Where does one post to a higher echelon a suggestion for new feature or product

Click here and choose a category.
(48478)

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

You have to buy iPhoto from the Mac App Store.

More than one posting period variant for one company code

Dear Colleagues,
My question is if it's somehow possible to assign more than one posting period variant to one company code? (I am not a FI specialist...)
(We are using the new GL and would like to define a special posting period interval for a non-leading ledger. The c.codes already exists and are already assigned to a posting period variant.)
The reason for why we would need an additional posting period variant for an existing c.code, is because we are already using both posting period intervals in t.code OB52.)
Best regards
Viveka Schwartz

Hi
You can assign a PPV to the Non Leading ledger separately.. That means both Leading and NOn Leading ledgers can have separate PPVs
Apart from this, no 3rd PPV is possible.. As Eli said, Validation is the only option, but I think Validations work for Leading ledgers only
Br, Ajay M

How would I know if any one post a thread in the Forum

Hi All,
Please tell me how would I know if any body post a thread in the forum??
Regards
krishhna

Hi,
I just read the "Suggestions and comments" forum and I found out that you did create a thread called "How would I know if any one post a thread in the Forum ".... So I knew that some one had posted a thread in the forum...
Regards,
Oliivier

Split one Post OFfice in two parts

Hi there!
I have problems with my Poa, because I'm having problems with I/O. Despite of all,
my POA is about 250 GB and I think that it's pretty big. So I have a lot of "batch users"
that are receiving a lot of emails with low priority, and I am thinking in split my post office
in two parts:
1) personal/phyisical users (humans): my actual post office. With SAN storage (expensive)
and priority backups.
2) non humans: batch users, iScsi storage , cheap and only a backup in saturday.
The question is: I saw that there is a procedure to move an user from one post office
to another, but these users have a lot of proxy accesses and rules. These options
are saved in the move? I mean, there are rules for forward emails to users in post office 1).
Does the system relocalize these users from post office 2) in post office 1) ?
I know that the best test would test with one test user... but just in case.
Thank you all!

In article <[email protected]>,
Antoniogutierrez wrote:
> I have problems with my Poa, because I'm having problems with I/O.
> Despite of all,
instead of putting a lot of effort into splitting this little
PostOffice into two, how about looking at the I/O challenges as fixing
them might be much more effective. Might even help you elsewhere as
well.
What plateform are you running on? Hypervisor? What is the storage
access type?
What are the particular I/O challenges you are hitting?
Andy of
http://KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

SD-FI generate more then one post in FI

Hi all.
Does someone know if it is possible to generate, using enhacement or user-exit or costumizing (V/08) , more than one post in FI ?
Thanks,
Nuno

Hi Sudhir, thanks for anwser.
The point is:
with one shot (one item of a billing document) we need to generate two posts.
Ex. item with 1200u20AC, we need to do the following posts:
1- debit 1200 (conciliantion account) - This is done in Tcode OV64
2- credit 1200 (revenue account) - This is done in Tcode VKOA
3- debit 1200 (conciliantion account)
4- credit 1200 (conciliantion account)
The first and second posts are OK. For the third and fourth post the system does not do the post.
Thanks,
Nuno

MB51 showing data for just one Posting date

Hi All,
MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
Please tell what should i do ASAP.
Thanks
Madhur

HI,
MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
year from 01/01/2008 to 12/01/2008 i Think this is MM.DD.YYYY format,
Ok can you clear your MIGO posting date fromat i.e MM.DD.YYYY or DD.MM.YYYY,check it at your end
or try this give only plant and movement type 101 and execute report
Regards
Kailas Ugale

HP PSC 1210 all-in-one pen failure issue

I have an hp psc 1210 all-in-one printer and recently replaced both print cartridges. Then, when I went to print it said that i had a pen failure. I then discovered online that this could be because of dirty cartridge contacts, so I cleaned them as instructed. After allowing them time to dry, I returned them to the printer and plugged it back in. However, now the printer will not turn on at all. What is wrong with my printer?

Hi,
What application you are scanning from? is it Paint or Windows fax and scan?
Can you see the same behavior while using any of those options?
You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

K8N Neo2 Platinum POST failure

System has run great for more than a year. Now, system hangs in POST. No beeps. No display. D-Bracket lights 1 red, 2 green, 3 green 4 red (Processor init). Disconnected extraneous devices - no effect. Swapped video cards - no effect. Reseated CPU and memory - no effect.
System did boot once after failures started and ran fine for 3 days - had to restart Windows and boot problem started again and won't go away. The fact that everything ran fine after it managed to boot that one time makes me think the CPU & memory are OK. Now, system hangs in POST every time.
I don't know what to make of the D-Bracket lights which seem to indicate a CPU problem when CPU seemed to be working fine the one time it managed to boot in the midst of all the hangs.
Any ideas about what to try next. My thoughts point to a motherboard failure, but I hate to start randomly replacing parts.
I'd sure appreciate any help anyone might be able to offer.

Quote from: tomkk on 24-February-06, 00:39:38
OK, seems I did everything but clear CMOS settings and that corrected the problem. Many thanks!!
Now, for my own education, I've been dealing with these things for 25 years and I've never seen a CMOS setting change so it screwed up the system this way this way. Somehow, one or more of the settings apparently changed and had to be reset via the CMOS clear. What would cause that to happen? Do I have some other problem waiting to happen?
Thanks for the help.
It can happen sometimes.
Could be caused by a crash, powerdip, or a peak in the ground current... Theoreticly a source of radiation (table fan, cell phone, DECT phone, etc..) could also cause bios settings to change spontiously.
In my case it's usually my 7 yr old nephew , but has happened twice in 3 years without him around, and the board worked fine afterwards. So nothing to be worried about

How do you get to the DOS prompt so that you can type in the info to help get into itunes store??? One post said search cmd, right click, run as administrator but where is the search cmd??

Have been struggling for days trying to get into the itunes store. Have contacted support with no help. I have been reading how some have typed something into a DOS prompt and have resolved their issues. One stated to "search cmd, right click, and run as admininstrator" but where is this? There was also a post about typing something into the DOS prompt....how do I get to this? Can someone please help??? SOOOOO FRUSTRATING. Thanks much...Carrie (Mike's wife:))

One stated to "search cmd, right click, and run as admininstrator" but where is this?
In the search field in your Vista start menu, type cmd
Next, right-click on the cmd that comes up and select "Run as administrator".

Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

Hi there,
So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
Here's my current system profile:
iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
MacOS 10.6.1 Never updated.
3.06 Ghz Intel Core2 Duo
4Gb RAM
LaCie Big Disk via FireWire 800
Internet access via Ethernet port (cable)
And here's The Issues Log:
– Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
– 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
– After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
– 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
– Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.
As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
4. Replace HD for a brand new one and either step 1 or 3.
5. As a complement, I'm thinking of adding more RAM.
Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
And if it fits best in any other forum, please also let me know.
Cheers and thanks in advantage.

You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet 6310 All-in-One alignment failure error

Unable to copy. When I turn on printer it attempts to align print heads but produces error message "Alignment failed". I can print from computer.
Thanks.
CJCJC

Hi @CJCJC,
Welcome to the HP Forums!
I noticed that you are getting the alignment failure error with your HP Officejet 6310. I am happy to help you with this issue!
I would suggest a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Also, I would recommend making sure none of your ink cartridges are low or empty, and that they are Genuine HP ink cartridges.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP PSC All-In-One Installation Failure

My wife has a HP Pavilion with Windows XP Home. She had a HP OfficeJet J4550 that we installed, but it would not Fax despite several attempts. I had a PSC AIO 2400xi that worked fine with my Windows XP, but I purchased a HP Pavilion with Windows 7 and it would not function the way I needed, so we decided to swap. I used the J4550 uninstall bat on my wifes, running it four times to level 4.
I then installed the psc 2400xi on her machine but the installation failed (2608 or something like that), I then used the uninstall bat and ran it through level 4. Then attempted to install again, but the same failure at the same location. I then downloaded the latest full install package from HP, ran it and it again failed. I then ran the uninstall bat and the all-in-one printer removal utility as well, then tried to install, again it failed, but it gave a message to continue. I clicked on "Continue" and it began a removal process and cleanup. I started working with the HP techs and went through a variety of things that has left my wife's computer with a small, but aggravating problem. Whenever we click on My Computer, My networks, Recycle Bin, and Windows Explorer, we get a message, "Windows Installer" trying to load SmartWebPrintingOC disk 1, but there isn't a disk one and we haven't to our knowledge tried to load SmartWebPrintingOC unless it was part of the psc 2400xi install.
We have removed all temporary files and those HP pinter files that were suggested by the HP tech, I have ran msicuu2.exe and another suggested by someone. Although I removed both via the Control panel I found one still in the Toos protion of CC Cleaner, when I clicked on it the Cleanup Process began, but my problem is still there.
Can anyone help, it's been several days since the last tech said they would have their engineers look at it for a solution.
Thanks
Terry

Hello psak12,
I would recommend buying a color cartridge as well as a black one because if a printer is low on ink it can cause the alignment to fail. Also, using refilled ink could cause that also. I would recommend getting genuing hp ink cartridges so that the printer would be able to read the ink levels properly and this should allow you to print out an alignment page. I hope that this is helpful.
Although i work for HP, my replies are my own and i am not an official spokesperson

Walking-One / POST Failure

Similar Messages

Maybe you are looking for