Want No of invoice for vendor.

HI Guru's,
want toprint No of invoice for vendor in field.
provide your inputs.

Hello,
Which is the datasource ?
I need to know what fields you have to "select" statement.
Thanks,
Marcelo
Message was edited by:
        Marcelo Bueno

Similar Messages

  • Table for open Purchase order and pending invoices for vendors

    Hi,
    Are there any table to know open Purchase orders and pending invoices for vendors.
    Quick response will be appreciated.
    Thanks & Regards

    hi,
    Purchase Order:
    S011:(PURCH: Purch. Group Statistics)
    Statistics (SSOUR)
    Version (VRSIO)
    Month (SPMON)
    Day (SPTAG)
    Week (SPWOC)
    Posting Period (SPBUP)
    Purchasing Org (EKORG)
    Purchasing Group (EKGRP)
    Vendor No (LIFNR)
    S012: (PURCHIS: Purchasing Statistics)
    Statistics (SSOUR)
    Version (VRSIO)
    Month (SPMON)
    Day (SPTAG)
    Week (SPWOC)
    Posting Period (SPBUP)
    Purchasing Org (EKORG)
    Purchasing Group (EKGRP)
    Material No (MATNR)
    Plant (WERKS)
    Info Record Category (ESOKZ)
    Material Group (MATKL)
    Info Record (INFNR)
    Country (LAND1)
    EINE: (Purchasing Info Record: Purchasing
    Organization Data)
    Info Record (INFNR)
    Purchasing Org (EKORG)
    Info Record Type (ESOKZ)
    Plant (WEKS)
    EKET: (Delivery Schedules)
    Purchasing Doc (EBELN)
    Item (EBELP)
    Delivery Schedule (ETENR)
    EKPO: (Purchasing Document Item)
    Purchasing Doc (EBELN)
    Item (EBELP)
    EKKN: (Account Assignment in Purchasing
    Document)
    Purchasing Doc (EBELN)
    Item (EBELP)
    Account Assignment (ZEKKN)
    EKKO: (Purchasing Document Header)
    Purchasing Doc (EBELN)
    EORD: (Purchasing Source List)
    Material No (MATNR)
    Plant (WERKS)
    Source List No (ZEORD)
    thx,
    Ganpat

  • Vendor Invoice for Plant maintenance order

    Hi
    WE generate 100's of PM order everyday. WE have technicians from outside contractor who work on PM Order. Instead of creating 100's of reqs and Pos for the service, we want to post invoice for the labor against PM order. IS it possible to do this?

    Hi Tridev,
    In such scenarios you should go for Blanket Purchase orders. In blanket PO you make a PO with vendor for a particular period and amount. Then you post only invoice with reference to the Blanket PO. You are not required to raise a PR and PO every time. Even you are not required to create service entry sheet. In blanket PO you may assign different cost center during invoice postings. Please talk to your MM consultant. Document type of such POs is Frame work.
    Following are the advantages of blanket PO:
    1. Different materials and/or services are procured over a longer period
    with a single PO item.
    2. It is not necessary to issue separate purchase orders for the individual
    procurement transactions.
    3. There is no goods receipt or service entry process.
    Please reply for more clarification.
    Regards,
    Vaibhav
    Edited by: VM1234 on Apr 15, 2010 6:07 AM

  • BADI for Vendor Invoice after Posting to send a mail to vendor

    Hi,
    My requirement Is like this.
    I have to send a mail to vendor after the Invoice for vendor is Posted.
    For dat I am searching for a badi to implement after the invoice is successfully posted.
    Please give some solution about this.
    Regards,
    Jyoti..

    if it is F-43 . check out the following
    BAdI Definition      Description                                                                               
    AC_QUANTITY_GET      Transfer of Quantities to Accounting - Customer Exit       
    BADI_ENJ_ALT_ADR     Go to alternative vendor/customer data                     
    BADI_F040_SCREEN_600 Screen Enhancement on F040 0600 Document Header            
    BADI_FDCB_SUBBAS01   Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)  
    BADI_FDCB_SUBBAS02   Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)  
    BADI_FDCB_SUBBAS03   Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)  
    BADI_FDCB_SUBBAS04   Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)  
    BADI_FDCB_SUBBAS05   Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)  
    BADI_PRKNG_NO_UPDATE BAdI for Deactivating Update of Parked Documents           
    F050S008             FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger      
    FBAS_CIN_LTAX1F02    Tax interface                                              
    FBAS_CIN_MF05AFA0    EWT - Downpayment Clearing - Tax transfer for CIN          
    FI_AUTHORITY_ITEM    Extended Authorization Check for Document Display (FB03)   
    FI_GET_INV_PYMT_AMT  BAdI for determining the payment amount for an invoice     
    FI_HEADER_SUB_1300   Screen Enhancement for Document Header SAPMF05A            
    FI_PAYREF_BADI_010   BAdI: Payment Reference Number                             
    FI_TRANS_DATE_DERIVE Derive BKPF-WWERT from Other Document Header Data          
    INVOIC_FI_INBOUND    BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)          
    RFESR000_BADI_001    BAdI for Own Processing of POR Item                        
    otherwise - find out the package of the program of the transaction.
    go to se84 - enhancements- business add ins - definitions - enter package and execute - you will see all the definations.

  • INVOIC02 IDOC for vendor invoice

    hi friends..
    can we post invoice for vendor in F-02 using this IDOC for posting key 31...
    plz help..

    Hi Sharadha,
    Good morning and greetings,
    Please go through the following SAP OSS Note
    Note 195538 - INVOIC02: user exit/additional account assignment
    If found useful please reward points
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Double Invoice Check for Vendors

    Hi
    How can we create a check for Double Invoices for Vendors?
    regards
    Rupal

    HI
    Pls follow the path to set the status for Double Invoice Check
    IMG>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate Invoices
    Moreever, in vendor master, you need to maintain the double invoice check tick in the company code data. I suggest you make this as a compulsory field in Field Status group for all your vendor account groups.
    Thanks & Regards
    Sanil K Bhandari

  • Automatic open item clearing for vendor/customers

    Dear All,
    For My client they want Automatic clearing process for vendor & customer Open item. What are the configuration settings i have to do for this how it will be process.
    please guide me to do this process.
    girija

    Hello,
    For my understanding:
    1. You mean how you can post icoming payment in an efficient way when you have a lot of open items per customer? Right?
    What information do you get from customer? invoice number? If yes you can search per invoice number and post partial payment.
    2. PDC cheque? Do you mean a post dated cheque. Well I think that this customer is a late payer.
    The date when you get the mony on your bank account is relevant! In my opinion.
    I do not know your local GAAP rules. Normally you bring cheque to bank and the next day you have incoming payment on your bank account. Usually the bank account papers are posted with document date. As an instance: bank account papers from 18.11.2013 here document date and posting date ist 18.11.2013.
    BUT: In this case I would ask your local auditor how to handle this, and what are the issues you have to take care.
    3. I have sent the material. Sorry, forget email one this was German version, last email ist English version.
    all the best Erwin

  • Entering invoice for additional cost.

    Hi,
    I have a PO with some 200 line items and 3 header conditions.
    I did migo and done MIRO also.Now I want to enter an invoice for subsequent debit for a value of say 200 EUR.
    How can I apportion this in to all the 200 items ?
    Is there any better approach ?
    Secondly, If I want to enter an invoice only for unplanned delivery cost.When I try to do this the balance does not get zero.
    Wher should I enter values.
    Assuming 200 Eur , I put the value as unplanned cost then to balance out this where shall I put this 200Eur in invoice ?
    I have 100 line items in PO.
    Please suggest.
    regards,
    manOO

    Hi,
    Thx again for the explaination.However I am facing some issues and needs guidance from you.
    When I enter invoice for vendor I always get some differences in the supplier invoice and the SAP value.Please suggest the approach in following cases:
    1.
    Invoice amount in supplier invoice greater than SAP suggested value.
    The supplier invoice is correct but somhow SAP invoice shows lesser values.It sometimes goes to level of 50-60 USD.
    In fact the user enters the PO based on the actual invoice since it comes with the shipment before GR(import procedure)
    Still it gives differences.
    If I want to accept vendor invoice then how can I adjust that difference in SAP.
    Normally a PO comprises of 200-300 lines.In that case how can the value be apportioned on each line suggested by SAP ?
    2.
    Sometimes the SAP value comes more than vendor invoice.In this case how to adjust the invoice ? I can not put the exact value as received from vendor.
    3.
    In most scenarios I have PO with header conditions of 3-4 types(all copied from freight).However these are the conditions used for clearing charges,freight charges misc. charges etc and many a times they are to be paid to the local supplier.
    If I have a exchange rate maintained on PO header and made it as fixed and my local currency is different(example: Goods supplier currency-EUR and Local clearing agent currency-say AED), then when I do invoice the exchange rate will be only applicable to the Goods supplier.Correct ?
    When I enter Invoice for the same PO for Delivery costs which is a local vendor, it will not pick up the exchange rate mentioned in the PO.Correct ? It will pick  the existing exchange rate maintained in system. Correct ?
    4.
    When can I use subsequent debit or subsequent credit considering my scenarios.
    Thanks in advance.request you to answer the questions and suggest the approach.
    Regards,
    manOO

  • Invoice for price difference

    I created a PO and did GR & IV on the PO price.
    (In the mean time, price of the material changes but the bill was raised on original PO price.)
    Now  the Vendor sends another Bill for the price difference.
    I want to create Invoice for that Bill price.
    How shall I do that?
    regards,
    VS

    Hi
    You can use subsequent credit/debit option.
    please check this:
    http://help.sap.com/saphelp_47x200/helpdata/en/a8/b99725452b11d189430000e829fbbd/content.htm
    regards
    Srinivas

  • Creation of invoices  for rent  in  SAP 4.7

    Dear All.
    I want to create invoices for rent in 4.7 version. i am not able to find the transaction or menupath for the same. Experts please guide.
    Regards.
    Varaprasad.

    Hi Prasad,
    You can create Invoices for rent in the T-Code FOYB - "Invoice for Rent:First Print", and you can also repeat the print for the invoices through T-Code FOYC.
    The Menu Path is: Real Estate Management -> Rental Accounting -> Rental Accounting Correspondence.
    Regards.
    Otelo.

  • Diff. Tcodes for Vendor Master Data

    Hi,
    We create the Vendor Master through XK01 Tcode...In which 3 window comes...General Data, Company Code Data and Purchasing data...
    In General Data, 4 checkbox are there....Address, Control, Payment Transactions and Contact Persons...
    Now requirement is this, we want a separate Tcode for Vendor Address which includes Address and Control data only...Also when we save this data, an Request Number should be create for Vendor Number Creation...
    Is there any solution for it...

    Hi,
    If you want to control use of check box itself under General Data, then one way is to use of screen variant using SHD0.
    Refer the below link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a070bfbb-d34a-2d10-b092-ecbe0b0d4a4c?QuickLink=index&overridelayout=true
    Regds,
    CB
    Edited by: Channabasappa.K on Jan 16, 2012 11:46 AM

  • Post Invoice for Service Entry with many Service line item-MM-LIV

    Dear All,
    I have a problem to post Invoice for Service Entry with many Service line item. The problem is as follow:
    I have created 1 Service Entry which has 5 Service line item in it. Three of the service line item are subject to Value Added Tax (VAT), the others aren't. Then, i wanted to post Invoice for the Service Entry, however, it just display 1 item which amount in total. How can i segregate each service line item in Service Entry thus i can post Invoice for all Service line item with subject to VAT and all service item with not subject to VAT, if just 1 Service Entry created for it ?
    Please help me.
    Thank You

    Hi Ganda,
    If you mark the 'service based invoice verification' checkbox in your PO item, your service items will be in your invoice as seperate invoice lines. Then you can modify the taxcodes on service item level.
    Kind regards, Dick Hendriks.

  • Shipping Costing - Invoice for the FWD Agent

    Hello:
    I am working with PO, Inbound Deliveries and Shippment in order to assign the import costs to all the items related to the shipment.
    I have a concern. I have created a Shipping Cost Document related to a Shipment, This document has a FWD Agent assign.
    Is there a way to register the Invoice (MIRO) of the FWD without having a PO created for the service?
    I have reviewed that in the MIRO, if I select "Purchase Order /Scheduling Agreement" and at the right I put "Planned Delivery Cost", the system brings the cost of the FWD related to that PO,
    The thing is that I want to register the whole cost of the FWD Agent related to a Shipment. So in the MIRO I select "Transportation Service Agent" and select the Shipment N°, but the system is not showing any line items.
    My question is, is there an option of registrating the FWD Agent invoice (MIRO), without a PO created and for the whole Shippment?, And if the answer is YES, how?, maybe some configuration is missing.
    Thanks in advanced,
    Regards,

    A freight PO (service PO) is required.  When you settle shipment cost document,  the service acceptance document is created.  This in turn will either add an entry to the already exist service/freight PO or generate a new service/freight PO (depend on how you configure the shipment cost item category).  This will allow you to create invoice in MIRO using the shipment document.
    The service/freight PO is required because you want to create invoice for the FWD agent.  The service/freight PO is just for a specific FWD agent.

  • Create Invoice for multiple deliveries

    Hi ,
    I want to create Invoice for multiple deliveries thru my prog.
    I tried using RV_INVOICE_CREATE but it creates multiple invoices if I enter multiple deliveries.
    I tried searching the forum but cud not get any solution for this.

    Hi,
    U can create single invoice for multiple deliveries if the following conditions are met
    1)payment terms are same
    2)billing dates are all same
    3)and Payer
    Go to VF01 and enter all the delivery document numbers and it will create a single invoice.
    Or else goto VF04 and search all delivery documents,select it and click on collective billing document button. One single invoice will be created
    regards.

  • Error Message for Excise Invoice for delivery in J1IJ

    Hello there,
    While doing Excise Invoice posting in J1IJ for delivery, I get below error
    "Quantity is more than that available in the excise invoice"
    The selected mother excise invoice available qty is 0.003 CTN, but I want to post invoice for 0.167 CTN.
    Please suggest at earliest.
    Thank you!

    Does the Depot have sufficient stock?
    As per your post, it seems there is stock deficient ?
    Regards,
    Reazuddin MD

Maybe you are looking for